| /* |
| * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces |
| * |
| * Copyright (C) 2004 Andrew de Quincey |
| * |
| * Parts of this file were based on sources as follows: |
| * |
| * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de> |
| * |
| * based on code: |
| * |
| * Copyright (C) 1999-2002 Ralph Metzler |
| * & Marcus Metzler for convergence integrated media GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> |
| #include <linux/kthread.h> |
| |
| #include "dvb_ca_en50221.h" |
| #include "dvb_ringbuffer.h" |
| |
| static int dvb_ca_en50221_debug; |
| |
| module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644); |
| MODULE_PARM_DESC(cam_debug, "enable verbose debug messages"); |
| |
| #define dprintk if (dvb_ca_en50221_debug) printk |
| |
| #define INIT_TIMEOUT_SECS 10 |
| |
| #define HOST_LINK_BUF_SIZE 0x200 |
| |
| #define RX_BUFFER_SIZE 65535 |
| |
| #define MAX_RX_PACKETS_PER_ITERATION 10 |
| |
| #define CTRLIF_DATA 0 |
| #define CTRLIF_COMMAND 1 |
| #define CTRLIF_STATUS 1 |
| #define CTRLIF_SIZE_LOW 2 |
| #define CTRLIF_SIZE_HIGH 3 |
| |
| #define CMDREG_HC 1 /* Host control */ |
| #define CMDREG_SW 2 /* Size write */ |
| #define CMDREG_SR 4 /* Size read */ |
| #define CMDREG_RS 8 /* Reset interface */ |
| #define CMDREG_FRIE 0x40 /* Enable FR interrupt */ |
| #define CMDREG_DAIE 0x80 /* Enable DA interrupt */ |
| #define IRQEN (CMDREG_DAIE) |
| |
| #define STATUSREG_RE 1 /* read error */ |
| #define STATUSREG_WE 2 /* write error */ |
| #define STATUSREG_FR 0x40 /* module free */ |
| #define STATUSREG_DA 0x80 /* data available */ |
| #define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE) /* general transfer error */ |
| |
| |
| #define DVB_CA_SLOTSTATE_NONE 0 |
| #define DVB_CA_SLOTSTATE_UNINITIALISED 1 |
| #define DVB_CA_SLOTSTATE_RUNNING 2 |
| #define DVB_CA_SLOTSTATE_INVALID 3 |
| #define DVB_CA_SLOTSTATE_WAITREADY 4 |
| #define DVB_CA_SLOTSTATE_VALIDATE 5 |
| #define DVB_CA_SLOTSTATE_WAITFR 6 |
| #define DVB_CA_SLOTSTATE_LINKINIT 7 |
| |
| |
| /* Information on a CA slot */ |
| struct dvb_ca_slot { |
| |
| /* current state of the CAM */ |
| int slot_state; |
| |
| /* Number of CAMCHANGES that have occurred since last processing */ |
| atomic_t camchange_count; |
| |
| /* Type of last CAMCHANGE */ |
| int camchange_type; |
| |
| /* base address of CAM config */ |
| u32 config_base; |
| |
| /* value to write into Config Control register */ |
| u8 config_option; |
| |
| /* if 1, the CAM supports DA IRQs */ |
| u8 da_irq_supported:1; |
| |
| /* size of the buffer to use when talking to the CAM */ |
| int link_buf_size; |
| |
| /* buffer for incoming packets */ |
| struct dvb_ringbuffer rx_buffer; |
| |
| /* timer used during various states of the slot */ |
| unsigned long timeout; |
| }; |
| |
| /* Private CA-interface information */ |
| struct dvb_ca_private { |
| |
| /* pointer back to the public data structure */ |
| struct dvb_ca_en50221 *pub; |
| |
| /* the DVB device */ |
| struct dvb_device *dvbdev; |
| |
| /* Flags describing the interface (DVB_CA_FLAG_*) */ |
| u32 flags; |
| |
| /* number of slots supported by this CA interface */ |
| unsigned int slot_count; |
| |
| /* information on each slot */ |
| struct dvb_ca_slot *slot_info; |
| |
| /* wait queues for read() and write() operations */ |
| wait_queue_head_t wait_queue; |
| |
| /* PID of the monitoring thread */ |
| struct task_struct *thread; |
| |
| /* Flag indicating if the CA device is open */ |
| unsigned int open:1; |
| |
| /* Flag indicating the thread should wake up now */ |
| unsigned int wakeup:1; |
| |
| /* Delay the main thread should use */ |
| unsigned long delay; |
| |
| /* Slot to start looking for data to read from in the next user-space read operation */ |
| int next_read_slot; |
| }; |
| |
| static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca); |
| static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); |
| static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); |
| |
| |
| /** |
| * Safely find needle in haystack. |
| * |
| * @param haystack Buffer to look in. |
| * @param hlen Number of bytes in haystack. |
| * @param needle Buffer to find. |
| * @param nlen Number of bytes in needle. |
| * @return Pointer into haystack needle was found at, or NULL if not found. |
| */ |
| static char *findstr(char * haystack, int hlen, char * needle, int nlen) |
| { |
| int i; |
| |
| if (hlen < nlen) |
| return NULL; |
| |
| for (i = 0; i <= hlen - nlen; i++) { |
| if (!strncmp(haystack + i, needle, nlen)) |
| return haystack + i; |
| } |
| |
| return NULL; |
| } |
| |
| |
| |
| /* ******************************************************************************** */ |
| /* EN50221 physical interface functions */ |
| |
| |
| /** |
| * Check CAM status. |
| */ |
| static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot) |
| { |
| int slot_status; |
| int cam_present_now; |
| int cam_changed; |
| |
| /* IRQ mode */ |
| if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) { |
| return (atomic_read(&ca->slot_info[slot].camchange_count) != 0); |
| } |
| |
| /* poll mode */ |
| slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open); |
| |
| cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0; |
| cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0; |
| if (!cam_changed) { |
| int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE); |
| cam_changed = (cam_present_now != cam_present_old); |
| } |
| |
| if (cam_changed) { |
| if (!cam_present_now) { |
| ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; |
| } else { |
| ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED; |
| } |
| atomic_set(&ca->slot_info[slot].camchange_count, 1); |
| } else { |
| if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) && |
| (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) { |
| // move to validate state if reset is completed |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; |
| } |
| } |
| |
| return cam_changed; |
| } |
| |
| |
| /** |
| * Wait for flags to become set on the STATUS register on a CAM interface, |
| * checking for errors and timeout. |
| * |
| * @param ca CA instance. |
| * @param slot Slot on interface. |
| * @param waitfor Flags to wait for. |
| * @param timeout_ms Timeout in milliseconds. |
| * |
| * @return 0 on success, nonzero on error. |
| */ |
| static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, |
| u8 waitfor, int timeout_hz) |
| { |
| unsigned long timeout; |
| unsigned long start; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* loop until timeout elapsed */ |
| start = jiffies; |
| timeout = jiffies + timeout_hz; |
| while (1) { |
| /* read the status and check for error */ |
| int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); |
| if (res < 0) |
| return -EIO; |
| |
| /* if we got the flags, it was successful! */ |
| if (res & waitfor) { |
| dprintk("%s succeeded timeout:%lu\n", __FUNCTION__, jiffies - start); |
| return 0; |
| } |
| |
| /* check for timeout */ |
| if (time_after(jiffies, timeout)) { |
| break; |
| } |
| |
| /* wait for a bit */ |
| msleep(1); |
| } |
| |
| dprintk("%s failed timeout:%lu\n", __FUNCTION__, jiffies - start); |
| |
| /* if we get here, we've timed out */ |
| return -ETIMEDOUT; |
| } |
| |
| |
| /** |
| * Initialise the link layer connection to a CAM. |
| * |
| * @param ca CA instance. |
| * @param slot Slot id. |
| * |
| * @return 0 on success, nonzero on failure. |
| */ |
| static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) |
| { |
| int ret; |
| int buf_size; |
| u8 buf[2]; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* we'll be determining these during this function */ |
| ca->slot_info[slot].da_irq_supported = 0; |
| |
| /* set the host link buffer size temporarily. it will be overwritten with the |
| * real negotiated size later. */ |
| ca->slot_info[slot].link_buf_size = 2; |
| |
| /* read the buffer size from the CAM */ |
| if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0) |
| return ret; |
| if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0) |
| return ret; |
| if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2) |
| return -EIO; |
| if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) |
| return ret; |
| |
| /* store it, and choose the minimum of our buffer and the CAM's buffer size */ |
| buf_size = (buf[0] << 8) | buf[1]; |
| if (buf_size > HOST_LINK_BUF_SIZE) |
| buf_size = HOST_LINK_BUF_SIZE; |
| ca->slot_info[slot].link_buf_size = buf_size; |
| buf[0] = buf_size >> 8; |
| buf[1] = buf_size & 0xff; |
| dprintk("Chosen link buffer size of %i\n", buf_size); |
| |
| /* write the buffer size to the CAM */ |
| if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) |
| return ret; |
| if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0) |
| return ret; |
| if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2) |
| return -EIO; |
| if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) |
| return ret; |
| |
| /* success */ |
| return 0; |
| } |
| |
| /** |
| * Read a tuple from attribute memory. |
| * |
| * @param ca CA instance. |
| * @param slot Slot id. |
| * @param address Address to read from. Updated. |
| * @param tupleType Tuple id byte. Updated. |
| * @param tupleLength Tuple length. Updated. |
| * @param tuple Dest buffer for tuple (must be 256 bytes). Updated. |
| * |
| * @return 0 on success, nonzero on error. |
| */ |
| static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot, |
| int *address, int *tupleType, int *tupleLength, u8 * tuple) |
| { |
| int i; |
| int _tupleType; |
| int _tupleLength; |
| int _address = *address; |
| |
| /* grab the next tuple length and type */ |
| if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0) |
| return _tupleType; |
| if (_tupleType == 0xff) { |
| dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType); |
| *address += 2; |
| *tupleType = _tupleType; |
| *tupleLength = 0; |
| return 0; |
| } |
| if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0) |
| return _tupleLength; |
| _address += 4; |
| |
| dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength); |
| |
| /* read in the whole tuple */ |
| for (i = 0; i < _tupleLength; i++) { |
| tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2)); |
| dprintk(" 0x%02x: 0x%02x %c\n", |
| i, tuple[i] & 0xff, |
| ((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.'); |
| } |
| _address += (_tupleLength * 2); |
| |
| // success |
| *tupleType = _tupleType; |
| *tupleLength = _tupleLength; |
| *address = _address; |
| return 0; |
| } |
| |
| |
| /** |
| * Parse attribute memory of a CAM module, extracting Config register, and checking |
| * it is a DVB CAM module. |
| * |
| * @param ca CA instance. |
| * @param slot Slot id. |
| * |
| * @return 0 on success, <0 on failure. |
| */ |
| static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) |
| { |
| int address = 0; |
| int tupleLength; |
| int tupleType; |
| u8 tuple[257]; |
| char *dvb_str; |
| int rasz; |
| int status; |
| int got_cftableentry = 0; |
| int end_chain = 0; |
| int i; |
| u16 manfid = 0; |
| u16 devid = 0; |
| |
| |
| // CISTPL_DEVICE_0A |
| if ((status = |
| dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) |
| return status; |
| if (tupleType != 0x1D) |
| return -EINVAL; |
| |
| |
| |
| // CISTPL_DEVICE_0C |
| if ((status = |
| dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) |
| return status; |
| if (tupleType != 0x1C) |
| return -EINVAL; |
| |
| |
| |
| // CISTPL_VERS_1 |
| if ((status = |
| dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) |
| return status; |
| if (tupleType != 0x15) |
| return -EINVAL; |
| |
| |
| |
| // CISTPL_MANFID |
| if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, |
| &tupleLength, tuple)) < 0) |
| return status; |
| if (tupleType != 0x20) |
| return -EINVAL; |
| if (tupleLength != 4) |
| return -EINVAL; |
| manfid = (tuple[1] << 8) | tuple[0]; |
| devid = (tuple[3] << 8) | tuple[2]; |
| |
| |
| |
| // CISTPL_CONFIG |
| if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, |
| &tupleLength, tuple)) < 0) |
| return status; |
| if (tupleType != 0x1A) |
| return -EINVAL; |
| if (tupleLength < 3) |
| return -EINVAL; |
| |
| /* extract the configbase */ |
| rasz = tuple[0] & 3; |
| if (tupleLength < (3 + rasz + 14)) |
| return -EINVAL; |
| ca->slot_info[slot].config_base = 0; |
| for (i = 0; i < rasz + 1; i++) { |
| ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i)); |
| } |
| |
| /* check it contains the correct DVB string */ |
| dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8); |
| if (dvb_str == NULL) |
| return -EINVAL; |
| if (tupleLength < ((dvb_str - (char *) tuple) + 12)) |
| return -EINVAL; |
| |
| /* is it a version we support? */ |
| if (strncmp(dvb_str + 8, "1.00", 4)) { |
| printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", |
| ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]); |
| return -EINVAL; |
| } |
| |
| /* process the CFTABLE_ENTRY tuples, and any after those */ |
| while ((!end_chain) && (address < 0x1000)) { |
| if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, |
| &tupleLength, tuple)) < 0) |
| return status; |
| switch (tupleType) { |
| case 0x1B: // CISTPL_CFTABLE_ENTRY |
| if (tupleLength < (2 + 11 + 17)) |
| break; |
| |
| /* if we've already parsed one, just use it */ |
| if (got_cftableentry) |
| break; |
| |
| /* get the config option */ |
| ca->slot_info[slot].config_option = tuple[0] & 0x3f; |
| |
| /* OK, check it contains the correct strings */ |
| if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) || |
| (findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL)) |
| break; |
| |
| got_cftableentry = 1; |
| break; |
| |
| case 0x14: // CISTPL_NO_LINK |
| break; |
| |
| case 0xFF: // CISTPL_END |
| end_chain = 1; |
| break; |
| |
| default: /* Unknown tuple type - just skip this tuple and move to the next one */ |
| dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType, |
| tupleLength); |
| break; |
| } |
| } |
| |
| if ((address > 0x1000) || (!got_cftableentry)) |
| return -EINVAL; |
| |
| dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n", |
| manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option); |
| |
| // success! |
| return 0; |
| } |
| |
| |
| /** |
| * Set CAM's configoption correctly. |
| * |
| * @param ca CA instance. |
| * @param slot Slot containing the CAM. |
| */ |
| static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot) |
| { |
| int configoption; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* set the config option */ |
| ca->pub->write_attribute_mem(ca->pub, slot, |
| ca->slot_info[slot].config_base, |
| ca->slot_info[slot].config_option); |
| |
| /* check it */ |
| configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base); |
| dprintk("Set configoption 0x%x, read configoption 0x%x\n", |
| ca->slot_info[slot].config_option, configoption & 0x3f); |
| |
| /* fine! */ |
| return 0; |
| |
| } |
| |
| |
| /** |
| * This function talks to an EN50221 CAM control interface. It reads a buffer of |
| * data from the CAM. The data can either be stored in a supplied buffer, or |
| * automatically be added to the slot's rx_buffer. |
| * |
| * @param ca CA instance. |
| * @param slot Slot to read from. |
| * @param ebuf If non-NULL, the data will be written to this buffer. If NULL, |
| * the data will be added into the buffering system as a normal fragment. |
| * @param ecount Size of ebuf. Ignored if ebuf is NULL. |
| * |
| * @return Number of bytes read, or < 0 on error |
| */ |
| static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount) |
| { |
| int bytes_read; |
| int status; |
| u8 buf[HOST_LINK_BUF_SIZE]; |
| int i; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* check if we have space for a link buf in the rx_buffer */ |
| if (ebuf == NULL) { |
| int buf_free; |
| |
| if (ca->slot_info[slot].rx_buffer.data == NULL) { |
| status = -EIO; |
| goto exit; |
| } |
| buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer); |
| |
| if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) { |
| status = -EAGAIN; |
| goto exit; |
| } |
| } |
| |
| /* check if there is data available */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) |
| goto exit; |
| if (!(status & STATUSREG_DA)) { |
| /* no data */ |
| status = 0; |
| goto exit; |
| } |
| |
| /* read the amount of data */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0) |
| goto exit; |
| bytes_read = status << 8; |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0) |
| goto exit; |
| bytes_read |= status; |
| |
| /* check it will fit */ |
| if (ebuf == NULL) { |
| if (bytes_read > ca->slot_info[slot].link_buf_size) { |
| printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", |
| ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; |
| status = -EIO; |
| goto exit; |
| } |
| if (bytes_read < 2) { |
| printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; |
| status = -EIO; |
| goto exit; |
| } |
| } else { |
| if (bytes_read > ecount) { |
| printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", |
| ca->dvbdev->adapter->num); |
| status = -EIO; |
| goto exit; |
| } |
| } |
| |
| /* fill the buffer */ |
| for (i = 0; i < bytes_read; i++) { |
| /* read byte and check */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0) |
| goto exit; |
| |
| /* OK, store it in the buffer */ |
| buf[i] = status; |
| } |
| |
| /* check for read error (RE should now be 0) */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) |
| goto exit; |
| if (status & STATUSREG_RE) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; |
| status = -EIO; |
| goto exit; |
| } |
| |
| /* OK, add it to the receive buffer, or copy into external buffer if supplied */ |
| if (ebuf == NULL) { |
| if (ca->slot_info[slot].rx_buffer.data == NULL) { |
| status = -EIO; |
| goto exit; |
| } |
| dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read); |
| } else { |
| memcpy(ebuf, buf, bytes_read); |
| } |
| |
| dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot, |
| buf[0], (buf[1] & 0x80) == 0, bytes_read); |
| |
| /* wake up readers when a last_fragment is received */ |
| if ((buf[1] & 0x80) == 0x00) { |
| wake_up_interruptible(&ca->wait_queue); |
| } |
| status = bytes_read; |
| |
| exit: |
| return status; |
| } |
| |
| |
| /** |
| * This function talks to an EN50221 CAM control interface. It writes a buffer of data |
| * to a CAM. |
| * |
| * @param ca CA instance. |
| * @param slot Slot to write to. |
| * @param ebuf The data in this buffer is treated as a complete link-level packet to |
| * be written. |
| * @param count Size of ebuf. |
| * |
| * @return Number of bytes written, or < 0 on error. |
| */ |
| static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write) |
| { |
| int status; |
| int i; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| |
| // sanity check |
| if (bytes_write > ca->slot_info[slot].link_buf_size) |
| return -EINVAL; |
| |
| /* check if interface is actually waiting for us to read from it, or if a read is in progress */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) |
| goto exitnowrite; |
| if (status & (STATUSREG_DA | STATUSREG_RE)) { |
| status = -EAGAIN; |
| goto exitnowrite; |
| } |
| |
| /* OK, set HC bit */ |
| if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, |
| IRQEN | CMDREG_HC)) != 0) |
| goto exit; |
| |
| /* check if interface is still free */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) |
| goto exit; |
| if (!(status & STATUSREG_FR)) { |
| /* it wasn't free => try again later */ |
| status = -EAGAIN; |
| goto exit; |
| } |
| |
| /* send the amount of data */ |
| if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0) |
| goto exit; |
| if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW, |
| bytes_write & 0xff)) != 0) |
| goto exit; |
| |
| /* send the buffer */ |
| for (i = 0; i < bytes_write; i++) { |
| if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0) |
| goto exit; |
| } |
| |
| /* check for write error (WE should now be 0) */ |
| if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) |
| goto exit; |
| if (status & STATUSREG_WE) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; |
| status = -EIO; |
| goto exit; |
| } |
| status = bytes_write; |
| |
| dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot, |
| buf[0], (buf[1] & 0x80) == 0, bytes_write); |
| |
| exit: |
| ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); |
| |
| exitnowrite: |
| return status; |
| } |
| EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq); |
| |
| |
| |
| /* ******************************************************************************** */ |
| /* EN50221 higher level functions */ |
| |
| |
| /** |
| * A CAM has been removed => shut it down. |
| * |
| * @param ca CA instance. |
| * @param slot Slot to shut down. |
| */ |
| static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot) |
| { |
| dprintk("%s\n", __FUNCTION__); |
| |
| ca->pub->slot_shutdown(ca->pub, slot); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; |
| |
| /* need to wake up all processes to check if they're now |
| trying to write to a defunct CAM */ |
| wake_up_interruptible(&ca->wait_queue); |
| |
| dprintk("Slot %i shutdown\n", slot); |
| |
| /* success */ |
| return 0; |
| } |
| EXPORT_SYMBOL(dvb_ca_en50221_camready_irq); |
| |
| |
| /** |
| * A CAMCHANGE IRQ has occurred. |
| * |
| * @param ca CA instance. |
| * @param slot Slot concerned. |
| * @param change_type One of the DVB_CA_CAMCHANGE_* values. |
| */ |
| void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type) |
| { |
| struct dvb_ca_private *ca = pubca->private; |
| |
| dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type); |
| |
| switch (change_type) { |
| case DVB_CA_EN50221_CAMCHANGE_REMOVED: |
| case DVB_CA_EN50221_CAMCHANGE_INSERTED: |
| break; |
| |
| default: |
| return; |
| } |
| |
| ca->slot_info[slot].camchange_type = change_type; |
| atomic_inc(&ca->slot_info[slot].camchange_count); |
| dvb_ca_en50221_thread_wakeup(ca); |
| } |
| EXPORT_SYMBOL(dvb_ca_en50221_frda_irq); |
| |
| |
| /** |
| * A CAMREADY IRQ has occurred. |
| * |
| * @param ca CA instance. |
| * @param slot Slot concerned. |
| */ |
| void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) |
| { |
| struct dvb_ca_private *ca = pubca->private; |
| |
| dprintk("CAMREADY IRQ slot:%i\n", slot); |
| |
| if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; |
| dvb_ca_en50221_thread_wakeup(ca); |
| } |
| } |
| |
| |
| /** |
| * An FR or DA IRQ has occurred. |
| * |
| * @param ca CA instance. |
| * @param slot Slot concerned. |
| */ |
| void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) |
| { |
| struct dvb_ca_private *ca = pubca->private; |
| int flags; |
| |
| dprintk("FR/DA IRQ slot:%i\n", slot); |
| |
| switch (ca->slot_info[slot].slot_state) { |
| case DVB_CA_SLOTSTATE_LINKINIT: |
| flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS); |
| if (flags & STATUSREG_DA) { |
| dprintk("CAM supports DA IRQ\n"); |
| ca->slot_info[slot].da_irq_supported = 1; |
| } |
| break; |
| |
| case DVB_CA_SLOTSTATE_RUNNING: |
| if (ca->open) |
| dvb_ca_en50221_thread_wakeup(ca); |
| break; |
| } |
| } |
| |
| |
| |
| /* ******************************************************************************** */ |
| /* EN50221 thread functions */ |
| |
| /** |
| * Wake up the DVB CA thread |
| * |
| * @param ca CA instance. |
| */ |
| static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca) |
| { |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| ca->wakeup = 1; |
| mb(); |
| wake_up_process(ca->thread); |
| } |
| |
| /** |
| * Update the delay used by the thread. |
| * |
| * @param ca CA instance. |
| */ |
| static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) |
| { |
| int delay; |
| int curdelay = 100000000; |
| int slot; |
| |
| for (slot = 0; slot < ca->slot_count; slot++) { |
| switch (ca->slot_info[slot].slot_state) { |
| default: |
| case DVB_CA_SLOTSTATE_NONE: |
| case DVB_CA_SLOTSTATE_INVALID: |
| delay = HZ * 60; |
| if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) { |
| delay = HZ / 10; |
| } |
| break; |
| |
| case DVB_CA_SLOTSTATE_UNINITIALISED: |
| case DVB_CA_SLOTSTATE_WAITREADY: |
| case DVB_CA_SLOTSTATE_VALIDATE: |
| case DVB_CA_SLOTSTATE_WAITFR: |
| case DVB_CA_SLOTSTATE_LINKINIT: |
| delay = HZ / 10; |
| break; |
| |
| case DVB_CA_SLOTSTATE_RUNNING: |
| delay = HZ * 60; |
| if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) { |
| delay = HZ / 10; |
| } |
| if (ca->open) { |
| if ((!ca->slot_info[slot].da_irq_supported) || |
| (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) { |
| delay = HZ / 10; |
| } |
| } |
| break; |
| } |
| |
| if (delay < curdelay) |
| curdelay = delay; |
| } |
| |
| ca->delay = curdelay; |
| } |
| |
| |
| |
| /** |
| * Kernel thread which monitors CA slots for CAM changes, and performs data transfers. |
| */ |
| static int dvb_ca_en50221_thread(void *data) |
| { |
| struct dvb_ca_private *ca = data; |
| int slot; |
| int flags; |
| int status; |
| int pktcount; |
| void *rxbuf; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* choose the correct initial delay */ |
| dvb_ca_en50221_thread_update_delay(ca); |
| |
| /* main loop */ |
| while (!kthread_should_stop()) { |
| /* sleep for a bit */ |
| if (!ca->wakeup) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(ca->delay); |
| if (kthread_should_stop()) |
| return 0; |
| } |
| ca->wakeup = 0; |
| |
| /* go through all the slots processing them */ |
| for (slot = 0; slot < ca->slot_count; slot++) { |
| |
| // check the cam status + deal with CAMCHANGEs |
| while (dvb_ca_en50221_check_camstatus(ca, slot)) { |
| /* clear down an old CI slot if necessary */ |
| if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) |
| dvb_ca_en50221_slot_shutdown(ca, slot); |
| |
| /* if a CAM is NOW present, initialise it */ |
| if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED; |
| } |
| |
| /* we've handled one CAMCHANGE */ |
| dvb_ca_en50221_thread_update_delay(ca); |
| atomic_dec(&ca->slot_info[slot].camchange_count); |
| } |
| |
| // CAM state machine |
| switch (ca->slot_info[slot].slot_state) { |
| case DVB_CA_SLOTSTATE_NONE: |
| case DVB_CA_SLOTSTATE_INVALID: |
| // no action needed |
| break; |
| |
| case DVB_CA_SLOTSTATE_UNINITIALISED: |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY; |
| ca->pub->slot_reset(ca->pub, slot); |
| ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); |
| break; |
| |
| case DVB_CA_SLOTSTATE_WAITREADY: |
| if (time_after(jiffies, ca->slot_info[slot].timeout)) { |
| printk("dvb_ca adaptor %d: PC card did not respond :(\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| // no other action needed; will automatically change state when ready |
| break; |
| |
| case DVB_CA_SLOTSTATE_VALIDATE: |
| if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) { |
| /* we need this extra check for annoying interfaces like the budget-av */ |
| if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && |
| (ca->pub->poll_slot_status)) { |
| int status = ca->pub->poll_slot_status(ca->pub, slot, 0); |
| if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| } |
| |
| printk("dvb_ca adapter %d: Invalid PC card inserted :(\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| if (dvb_ca_en50221_set_configoption(ca, slot) != 0) { |
| printk("dvb_ca adapter %d: Unable to initialise CAM :(\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| if (ca->pub->write_cam_control(ca->pub, slot, |
| CTRLIF_COMMAND, CMDREG_RS) != 0) { |
| printk("dvb_ca adapter %d: Unable to reset CAM IF\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| dprintk("DVB CAM validated successfully\n"); |
| |
| ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR; |
| ca->wakeup = 1; |
| break; |
| |
| case DVB_CA_SLOTSTATE_WAITFR: |
| if (time_after(jiffies, ca->slot_info[slot].timeout)) { |
| printk("dvb_ca adapter %d: DVB CAM did not respond :(\n", |
| ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| |
| flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); |
| if (flags & STATUSREG_FR) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; |
| ca->wakeup = 1; |
| } |
| break; |
| |
| case DVB_CA_SLOTSTATE_LINKINIT: |
| if (dvb_ca_en50221_link_init(ca, slot) != 0) { |
| /* we need this extra check for annoying interfaces like the budget-av */ |
| if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && |
| (ca->pub->poll_slot_status)) { |
| int status = ca->pub->poll_slot_status(ca->pub, slot, 0); |
| if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| } |
| |
| printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| |
| if (ca->slot_info[slot].rx_buffer.data == NULL) { |
| rxbuf = vmalloc(RX_BUFFER_SIZE); |
| if (rxbuf == NULL) { |
| printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; |
| dvb_ca_en50221_thread_update_delay(ca); |
| break; |
| } |
| dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE); |
| } |
| |
| ca->pub->slot_ts_enable(ca->pub, slot); |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING; |
| dvb_ca_en50221_thread_update_delay(ca); |
| printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num); |
| break; |
| |
| case DVB_CA_SLOTSTATE_RUNNING: |
| if (!ca->open) |
| continue; |
| |
| // poll slots for data |
| pktcount = 0; |
| while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) { |
| if (!ca->open) |
| break; |
| |
| /* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */ |
| if (dvb_ca_en50221_check_camstatus(ca, slot)) { |
| // we dont want to sleep on the next iteration so we can handle the cam change |
| ca->wakeup = 1; |
| break; |
| } |
| |
| /* check if we've hit our limit this time */ |
| if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) { |
| // dont sleep; there is likely to be more data to read |
| ca->wakeup = 1; |
| break; |
| } |
| } |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| |
| /* ******************************************************************************** */ |
| /* EN50221 IO interface functions */ |
| |
| /** |
| * Real ioctl implementation. |
| * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them. |
| * |
| * @param inode Inode concerned. |
| * @param file File concerned. |
| * @param cmd IOCTL command. |
| * @param arg Associated argument. |
| * |
| * @return 0 on success, <0 on error. |
| */ |
| static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, void *parg) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| int err = 0; |
| int slot; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| switch (cmd) { |
| case CA_RESET: |
| for (slot = 0; slot < ca->slot_count; slot++) { |
| if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { |
| dvb_ca_en50221_slot_shutdown(ca, slot); |
| if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) |
| dvb_ca_en50221_camchange_irq(ca->pub, |
| slot, |
| DVB_CA_EN50221_CAMCHANGE_INSERTED); |
| } |
| } |
| ca->next_read_slot = 0; |
| dvb_ca_en50221_thread_wakeup(ca); |
| break; |
| |
| case CA_GET_CAP: { |
| struct ca_caps *caps = parg; |
| |
| caps->slot_num = ca->slot_count; |
| caps->slot_type = CA_CI_LINK; |
| caps->descr_num = 0; |
| caps->descr_type = 0; |
| break; |
| } |
| |
| case CA_GET_SLOT_INFO: { |
| struct ca_slot_info *info = parg; |
| |
| if ((info->num > ca->slot_count) || (info->num < 0)) |
| return -EINVAL; |
| |
| info->type = CA_CI_LINK; |
| info->flags = 0; |
| if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE) |
| && (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) { |
| info->flags = CA_CI_MODULE_PRESENT; |
| } |
| if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) { |
| info->flags |= CA_CI_MODULE_READY; |
| } |
| break; |
| } |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| |
| return err; |
| } |
| |
| |
| /** |
| * Wrapper for ioctl implementation. |
| * |
| * @param inode Inode concerned. |
| * @param file File concerned. |
| * @param cmd IOCTL command. |
| * @param arg Associated argument. |
| * |
| * @return 0 on success, <0 on error. |
| */ |
| static int dvb_ca_en50221_io_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return dvb_usercopy(inode, file, cmd, arg, dvb_ca_en50221_io_do_ioctl); |
| } |
| |
| |
| /** |
| * Implementation of write() syscall. |
| * |
| * @param file File structure. |
| * @param buf Source buffer. |
| * @param count Size of source buffer. |
| * @param ppos Position in file (ignored). |
| * |
| * @return Number of bytes read, or <0 on error. |
| */ |
| static ssize_t dvb_ca_en50221_io_write(struct file *file, |
| const char __user * buf, size_t count, loff_t * ppos) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| u8 slot, connection_id; |
| int status; |
| u8 fragbuf[HOST_LINK_BUF_SIZE]; |
| int fragpos = 0; |
| int fraglen; |
| unsigned long timeout; |
| int written; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ |
| if (count < 2) |
| return -EINVAL; |
| |
| /* extract slot & connection id */ |
| if (copy_from_user(&slot, buf, 1)) |
| return -EFAULT; |
| if (copy_from_user(&connection_id, buf + 1, 1)) |
| return -EFAULT; |
| buf += 2; |
| count -= 2; |
| |
| /* check if the slot is actually running */ |
| if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) |
| return -EINVAL; |
| |
| /* fragment the packets & store in the buffer */ |
| while (fragpos < count) { |
| fraglen = ca->slot_info[slot].link_buf_size - 2; |
| if ((count - fragpos) < fraglen) |
| fraglen = count - fragpos; |
| |
| fragbuf[0] = connection_id; |
| fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00; |
| if ((status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen)) != 0) |
| goto exit; |
| |
| timeout = jiffies + HZ / 2; |
| written = 0; |
| while (!time_after(jiffies, timeout)) { |
| /* check the CAM hasn't been removed/reset in the meantime */ |
| if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) { |
| status = -EIO; |
| goto exit; |
| } |
| |
| status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); |
| if (status == (fraglen + 2)) { |
| written = 1; |
| break; |
| } |
| if (status != -EAGAIN) |
| goto exit; |
| |
| msleep(1); |
| } |
| if (!written) { |
| status = -EIO; |
| goto exit; |
| } |
| |
| fragpos += fraglen; |
| } |
| status = count + 2; |
| |
| exit: |
| return status; |
| } |
| |
| |
| /** |
| * Condition for waking up in dvb_ca_en50221_io_read_condition |
| */ |
| static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, |
| int *result, int *_slot) |
| { |
| int slot; |
| int slot_count = 0; |
| int idx; |
| size_t fraglen; |
| int connection_id = -1; |
| int found = 0; |
| u8 hdr[2]; |
| |
| slot = ca->next_read_slot; |
| while ((slot_count < ca->slot_count) && (!found)) { |
| if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) |
| goto nextslot; |
| |
| if (ca->slot_info[slot].rx_buffer.data == NULL) { |
| return 0; |
| } |
| |
| idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); |
| while (idx != -1) { |
| dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2, 0); |
| if (connection_id == -1) |
| connection_id = hdr[0]; |
| if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) { |
| *_slot = slot; |
| found = 1; |
| break; |
| } |
| |
| idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); |
| } |
| |
| nextslot: |
| slot = (slot + 1) % ca->slot_count; |
| slot_count++; |
| } |
| |
| ca->next_read_slot = slot; |
| return found; |
| } |
| |
| |
| /** |
| * Implementation of read() syscall. |
| * |
| * @param file File structure. |
| * @param buf Destination buffer. |
| * @param count Size of destination buffer. |
| * @param ppos Position in file (ignored). |
| * |
| * @return Number of bytes read, or <0 on error. |
| */ |
| static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, |
| size_t count, loff_t * ppos) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| int status; |
| int result = 0; |
| u8 hdr[2]; |
| int slot; |
| int connection_id = -1; |
| size_t idx, idx2; |
| int last_fragment = 0; |
| size_t fraglen; |
| int pktlen; |
| int dispose = 0; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ |
| if (count < 2) |
| return -EINVAL; |
| |
| /* wait for some data */ |
| if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) { |
| |
| /* if we're in nonblocking mode, exit immediately */ |
| if (file->f_flags & O_NONBLOCK) |
| return -EWOULDBLOCK; |
| |
| /* wait for some data */ |
| status = wait_event_interruptible(ca->wait_queue, |
| dvb_ca_en50221_io_read_condition |
| (ca, &result, &slot)); |
| } |
| if ((status < 0) || (result < 0)) { |
| if (result) |
| return result; |
| return status; |
| } |
| |
| idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); |
| pktlen = 2; |
| do { |
| if (idx == -1) { |
| printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num); |
| status = -EIO; |
| goto exit; |
| } |
| |
| dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2, 0); |
| if (connection_id == -1) |
| connection_id = hdr[0]; |
| if (hdr[0] == connection_id) { |
| if (pktlen < count) { |
| if ((pktlen + fraglen - 2) > count) { |
| fraglen = count - pktlen; |
| } else { |
| fraglen -= 2; |
| } |
| |
| if ((status = dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 2, |
| (u8 *)buf + pktlen, fraglen, 1)) < 0) { |
| goto exit; |
| } |
| pktlen += fraglen; |
| } |
| |
| if ((hdr[1] & 0x80) == 0) |
| last_fragment = 1; |
| dispose = 1; |
| } |
| |
| idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); |
| if (dispose) |
| dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx); |
| idx = idx2; |
| dispose = 0; |
| } while (!last_fragment); |
| |
| hdr[0] = slot; |
| hdr[1] = connection_id; |
| if ((status = copy_to_user(buf, hdr, 2)) != 0) |
| goto exit; |
| status = pktlen; |
| |
| exit: |
| return status; |
| } |
| |
| |
| /** |
| * Implementation of file open syscall. |
| * |
| * @param inode Inode concerned. |
| * @param file File concerned. |
| * |
| * @return 0 on success, <0 on failure. |
| */ |
| static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| int err; |
| int i; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| if (!try_module_get(ca->pub->owner)) |
| return -EIO; |
| |
| err = dvb_generic_open(inode, file); |
| if (err < 0) { |
| module_put(ca->pub->owner); |
| return err; |
| } |
| |
| for (i = 0; i < ca->slot_count; i++) { |
| |
| if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) { |
| if (ca->slot_info[i].rx_buffer.data != NULL) { |
| /* it is safe to call this here without locks because |
| * ca->open == 0. Data is not read in this case */ |
| dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer); |
| } |
| } |
| } |
| |
| ca->open = 1; |
| dvb_ca_en50221_thread_update_delay(ca); |
| dvb_ca_en50221_thread_wakeup(ca); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * Implementation of file close syscall. |
| * |
| * @param inode Inode concerned. |
| * @param file File concerned. |
| * |
| * @return 0 on success, <0 on failure. |
| */ |
| static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| int err; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* mark the CA device as closed */ |
| ca->open = 0; |
| dvb_ca_en50221_thread_update_delay(ca); |
| |
| err = dvb_generic_release(inode, file); |
| |
| module_put(ca->pub->owner); |
| |
| return err; |
| } |
| |
| |
| /** |
| * Implementation of poll() syscall. |
| * |
| * @param file File concerned. |
| * @param wait poll wait table. |
| * |
| * @return Standard poll mask. |
| */ |
| static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_ca_private *ca = dvbdev->priv; |
| unsigned int mask = 0; |
| int slot; |
| int result = 0; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { |
| mask |= POLLIN; |
| } |
| |
| /* if there is something, return now */ |
| if (mask) |
| return mask; |
| |
| /* wait for something to happen */ |
| poll_wait(file, &ca->wait_queue, wait); |
| |
| if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { |
| mask |= POLLIN; |
| } |
| |
| return mask; |
| } |
| EXPORT_SYMBOL(dvb_ca_en50221_init); |
| |
| |
| static struct file_operations dvb_ca_fops = { |
| .owner = THIS_MODULE, |
| .read = dvb_ca_en50221_io_read, |
| .write = dvb_ca_en50221_io_write, |
| .ioctl = dvb_ca_en50221_io_ioctl, |
| .open = dvb_ca_en50221_io_open, |
| .release = dvb_ca_en50221_io_release, |
| .poll = dvb_ca_en50221_io_poll, |
| }; |
| |
| static struct dvb_device dvbdev_ca = { |
| .priv = NULL, |
| .users = 1, |
| .readers = 1, |
| .writers = 1, |
| .fops = &dvb_ca_fops, |
| }; |
| |
| |
| /* ******************************************************************************** */ |
| /* Initialisation/shutdown functions */ |
| |
| |
| /** |
| * Initialise a new DVB CA EN50221 interface device. |
| * |
| * @param dvb_adapter DVB adapter to attach the new CA device to. |
| * @param ca The dvb_ca instance. |
| * @param flags Flags describing the CA device (DVB_CA_FLAG_*). |
| * @param slot_count Number of slots supported. |
| * |
| * @return 0 on success, nonzero on failure |
| */ |
| int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, |
| struct dvb_ca_en50221 *pubca, int flags, int slot_count) |
| { |
| int ret; |
| struct dvb_ca_private *ca = NULL; |
| int i; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| if (slot_count < 1) |
| return -EINVAL; |
| |
| /* initialise the system data */ |
| if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| ca->pub = pubca; |
| ca->flags = flags; |
| ca->slot_count = slot_count; |
| if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| init_waitqueue_head(&ca->wait_queue); |
| ca->open = 0; |
| ca->wakeup = 0; |
| ca->next_read_slot = 0; |
| pubca->private = ca; |
| |
| /* register the DVB device */ |
| ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA); |
| if (ret) |
| goto error; |
| |
| /* now initialise each slot */ |
| for (i = 0; i < slot_count; i++) { |
| memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot)); |
| ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; |
| atomic_set(&ca->slot_info[i].camchange_count, 0); |
| ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; |
| } |
| |
| if (signal_pending(current)) { |
| ret = -EINTR; |
| goto error; |
| } |
| mb(); |
| |
| /* create a kthread for monitoring this CA device */ |
| ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i", |
| ca->dvbdev->adapter->num, ca->dvbdev->id); |
| if (IS_ERR(ca->thread)) { |
| ret = PTR_ERR(ca->thread); |
| printk("dvb_ca_init: failed to start kernel_thread (%d)\n", |
| ret); |
| goto error; |
| } |
| return 0; |
| |
| error: |
| if (ca != NULL) { |
| if (ca->dvbdev != NULL) |
| dvb_unregister_device(ca->dvbdev); |
| kfree(ca->slot_info); |
| kfree(ca); |
| } |
| pubca->private = NULL; |
| return ret; |
| } |
| EXPORT_SYMBOL(dvb_ca_en50221_release); |
| |
| |
| |
| /** |
| * Release a DVB CA EN50221 interface device. |
| * |
| * @param ca_dev The dvb_device_t instance for the CA device. |
| * @param ca The associated dvb_ca instance. |
| */ |
| void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) |
| { |
| struct dvb_ca_private *ca = pubca->private; |
| int i; |
| |
| dprintk("%s\n", __FUNCTION__); |
| |
| /* shutdown the thread if there was one */ |
| kthread_stop(ca->thread); |
| |
| for (i = 0; i < ca->slot_count; i++) { |
| dvb_ca_en50221_slot_shutdown(ca, i); |
| vfree(ca->slot_info[i].rx_buffer.data); |
| } |
| kfree(ca->slot_info); |
| dvb_unregister_device(ca->dvbdev); |
| kfree(ca); |
| pubca->private = NULL; |
| } |