| /* |
| * sgiseeq.c: Seeq8003 ethernet driver for SGI machines. |
| * |
| * Copyright (C) 1996 David S. Miller (davem@davemloft.net) |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/platform_device.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| |
| #include <asm/sgi/hpc3.h> |
| #include <asm/sgi/ip22.h> |
| #include <asm/sgi/seeq.h> |
| |
| #include "sgiseeq.h" |
| |
| static char *sgiseeqstr = "SGI Seeq8003"; |
| |
| /* |
| * If you want speed, you do something silly, it always has worked for me. So, |
| * with that in mind, I've decided to make this driver look completely like a |
| * stupid Lance from a driver architecture perspective. Only difference is that |
| * here our "ring buffer" looks and acts like a real Lance one does but is |
| * laid out like how the HPC DMA and the Seeq want it to. You'd be surprised |
| * how a stupid idea like this can pay off in performance, not to mention |
| * making this driver 2,000 times easier to write. ;-) |
| */ |
| |
| /* Tune these if we tend to run out often etc. */ |
| #define SEEQ_RX_BUFFERS 16 |
| #define SEEQ_TX_BUFFERS 16 |
| |
| #define PKT_BUF_SZ 1584 |
| |
| #define NEXT_RX(i) (((i) + 1) & (SEEQ_RX_BUFFERS - 1)) |
| #define NEXT_TX(i) (((i) + 1) & (SEEQ_TX_BUFFERS - 1)) |
| #define PREV_RX(i) (((i) - 1) & (SEEQ_RX_BUFFERS - 1)) |
| #define PREV_TX(i) (((i) - 1) & (SEEQ_TX_BUFFERS - 1)) |
| |
| #define TX_BUFFS_AVAIL(sp) ((sp->tx_old <= sp->tx_new) ? \ |
| sp->tx_old + (SEEQ_TX_BUFFERS - 1) - sp->tx_new : \ |
| sp->tx_old - sp->tx_new - 1) |
| |
| #define VIRT_TO_DMA(sp, v) ((sp)->srings_dma + \ |
| (dma_addr_t)((unsigned long)(v) - \ |
| (unsigned long)((sp)->rx_desc))) |
| |
| /* Copy frames shorter than rx_copybreak, otherwise pass on up in |
| * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha). |
| */ |
| static int rx_copybreak = 100; |
| |
| #define PAD_SIZE (128 - sizeof(struct hpc_dma_desc) - sizeof(void *)) |
| |
| struct sgiseeq_rx_desc { |
| volatile struct hpc_dma_desc rdma; |
| u8 padding[PAD_SIZE]; |
| struct sk_buff *skb; |
| }; |
| |
| struct sgiseeq_tx_desc { |
| volatile struct hpc_dma_desc tdma; |
| u8 padding[PAD_SIZE]; |
| struct sk_buff *skb; |
| }; |
| |
| /* |
| * Warning: This structure is laid out in a certain way because HPC dma |
| * descriptors must be 8-byte aligned. So don't touch this without |
| * some care. |
| */ |
| struct sgiseeq_init_block { /* Note the name ;-) */ |
| struct sgiseeq_rx_desc rxvector[SEEQ_RX_BUFFERS]; |
| struct sgiseeq_tx_desc txvector[SEEQ_TX_BUFFERS]; |
| }; |
| |
| struct sgiseeq_private { |
| struct sgiseeq_init_block *srings; |
| dma_addr_t srings_dma; |
| |
| /* Ptrs to the descriptors in uncached space. */ |
| struct sgiseeq_rx_desc *rx_desc; |
| struct sgiseeq_tx_desc *tx_desc; |
| |
| char *name; |
| struct hpc3_ethregs *hregs; |
| struct sgiseeq_regs *sregs; |
| |
| /* Ring entry counters. */ |
| unsigned int rx_new, tx_new; |
| unsigned int rx_old, tx_old; |
| |
| int is_edlc; |
| unsigned char control; |
| unsigned char mode; |
| |
| spinlock_t tx_lock; |
| }; |
| |
| static inline void dma_sync_desc_cpu(struct net_device *dev, void *addr) |
| { |
| dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), |
| DMA_FROM_DEVICE); |
| } |
| |
| static inline void dma_sync_desc_dev(struct net_device *dev, void *addr) |
| { |
| dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), |
| DMA_TO_DEVICE); |
| } |
| |
| static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) |
| { |
| hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; |
| udelay(20); |
| hregs->reset = 0; |
| } |
| |
| static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, |
| struct sgiseeq_regs *sregs) |
| { |
| hregs->rx_ctrl = hregs->tx_ctrl = 0; |
| hpc3_eth_reset(hregs); |
| } |
| |
| #define RSTAT_GO_BITS (SEEQ_RCMD_IGOOD | SEEQ_RCMD_IEOF | SEEQ_RCMD_ISHORT | \ |
| SEEQ_RCMD_IDRIB | SEEQ_RCMD_ICRC) |
| |
| static inline void seeq_go(struct sgiseeq_private *sp, |
| struct hpc3_ethregs *hregs, |
| struct sgiseeq_regs *sregs) |
| { |
| sregs->rstat = sp->mode | RSTAT_GO_BITS; |
| hregs->rx_ctrl = HPC3_ERXCTRL_ACTIVE; |
| } |
| |
| static inline void __sgiseeq_set_mac_address(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct sgiseeq_regs *sregs = sp->sregs; |
| int i; |
| |
| sregs->tstat = SEEQ_TCMD_RB0; |
| for (i = 0; i < 6; i++) |
| sregs->rw.eth_addr[i] = dev->dev_addr[i]; |
| } |
| |
| static int sgiseeq_set_mac_address(struct net_device *dev, void *addr) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct sockaddr *sa = addr; |
| |
| memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); |
| |
| spin_lock_irq(&sp->tx_lock); |
| __sgiseeq_set_mac_address(dev); |
| spin_unlock_irq(&sp->tx_lock); |
| |
| return 0; |
| } |
| |
| #define TCNTINFO_INIT (HPCDMA_EOX | HPCDMA_ETXD) |
| #define RCNTCFG_INIT (HPCDMA_OWN | HPCDMA_EORP | HPCDMA_XIE) |
| #define RCNTINFO_INIT (RCNTCFG_INIT | (PKT_BUF_SZ & HPCDMA_BCNT)) |
| |
| static int seeq_init_ring(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| int i; |
| |
| netif_stop_queue(dev); |
| sp->rx_new = sp->tx_new = 0; |
| sp->rx_old = sp->tx_old = 0; |
| |
| __sgiseeq_set_mac_address(dev); |
| |
| /* Setup tx ring. */ |
| for(i = 0; i < SEEQ_TX_BUFFERS; i++) { |
| sp->tx_desc[i].tdma.cntinfo = TCNTINFO_INIT; |
| dma_sync_desc_dev(dev, &sp->tx_desc[i]); |
| } |
| |
| /* And now the rx ring. */ |
| for (i = 0; i < SEEQ_RX_BUFFERS; i++) { |
| if (!sp->rx_desc[i].skb) { |
| dma_addr_t dma_addr; |
| struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ); |
| |
| if (skb == NULL) |
| return -ENOMEM; |
| skb_reserve(skb, 2); |
| dma_addr = dma_map_single(dev->dev.parent, |
| skb->data - 2, |
| PKT_BUF_SZ, DMA_FROM_DEVICE); |
| sp->rx_desc[i].skb = skb; |
| sp->rx_desc[i].rdma.pbuf = dma_addr; |
| } |
| sp->rx_desc[i].rdma.cntinfo = RCNTINFO_INIT; |
| dma_sync_desc_dev(dev, &sp->rx_desc[i]); |
| } |
| sp->rx_desc[i - 1].rdma.cntinfo |= HPCDMA_EOR; |
| dma_sync_desc_dev(dev, &sp->rx_desc[i - 1]); |
| return 0; |
| } |
| |
| static void seeq_purge_ring(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| int i; |
| |
| /* clear tx ring. */ |
| for (i = 0; i < SEEQ_TX_BUFFERS; i++) { |
| if (sp->tx_desc[i].skb) { |
| dev_kfree_skb(sp->tx_desc[i].skb); |
| sp->tx_desc[i].skb = NULL; |
| } |
| } |
| |
| /* And now the rx ring. */ |
| for (i = 0; i < SEEQ_RX_BUFFERS; i++) { |
| if (sp->rx_desc[i].skb) { |
| dev_kfree_skb(sp->rx_desc[i].skb); |
| sp->rx_desc[i].skb = NULL; |
| } |
| } |
| } |
| |
| #ifdef DEBUG |
| static struct sgiseeq_private *gpriv; |
| static struct net_device *gdev; |
| |
| static void sgiseeq_dump_rings(void) |
| { |
| static int once; |
| struct sgiseeq_rx_desc *r = gpriv->rx_desc; |
| struct sgiseeq_tx_desc *t = gpriv->tx_desc; |
| struct hpc3_ethregs *hregs = gpriv->hregs; |
| int i; |
| |
| if (once) |
| return; |
| once++; |
| printk("RING DUMP:\n"); |
| for (i = 0; i < SEEQ_RX_BUFFERS; i++) { |
| printk("RX [%d]: @(%p) [%08x,%08x,%08x] ", |
| i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, |
| r[i].rdma.pnext); |
| i += 1; |
| printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", |
| i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, |
| r[i].rdma.pnext); |
| } |
| for (i = 0; i < SEEQ_TX_BUFFERS; i++) { |
| printk("TX [%d]: @(%p) [%08x,%08x,%08x] ", |
| i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, |
| t[i].tdma.pnext); |
| i += 1; |
| printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", |
| i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, |
| t[i].tdma.pnext); |
| } |
| printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n", |
| gpriv->rx_new, gpriv->rx_old, gpriv->tx_new, gpriv->tx_old); |
| printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n", |
| hregs->rx_cbptr, hregs->rx_ndptr, hregs->rx_ctrl); |
| printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n", |
| hregs->tx_cbptr, hregs->tx_ndptr, hregs->tx_ctrl); |
| } |
| #endif |
| |
| #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) |
| #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) |
| |
| static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, |
| struct sgiseeq_regs *sregs) |
| { |
| struct hpc3_ethregs *hregs = sp->hregs; |
| int err; |
| |
| reset_hpc3_and_seeq(hregs, sregs); |
| err = seeq_init_ring(dev); |
| if (err) |
| return err; |
| |
| /* Setup to field the proper interrupt types. */ |
| if (sp->is_edlc) { |
| sregs->tstat = TSTAT_INIT_EDLC; |
| sregs->rw.wregs.control = sp->control; |
| sregs->rw.wregs.frame_gap = 0; |
| } else { |
| sregs->tstat = TSTAT_INIT_SEEQ; |
| } |
| |
| hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc); |
| hregs->tx_ndptr = VIRT_TO_DMA(sp, sp->tx_desc); |
| |
| seeq_go(sp, hregs, sregs); |
| return 0; |
| } |
| |
| static void record_rx_errors(struct net_device *dev, unsigned char status) |
| { |
| if (status & SEEQ_RSTAT_OVERF || |
| status & SEEQ_RSTAT_SFRAME) |
| dev->stats.rx_over_errors++; |
| if (status & SEEQ_RSTAT_CERROR) |
| dev->stats.rx_crc_errors++; |
| if (status & SEEQ_RSTAT_DERROR) |
| dev->stats.rx_frame_errors++; |
| if (status & SEEQ_RSTAT_REOF) |
| dev->stats.rx_errors++; |
| } |
| |
| static inline void rx_maybe_restart(struct sgiseeq_private *sp, |
| struct hpc3_ethregs *hregs, |
| struct sgiseeq_regs *sregs) |
| { |
| if (!(hregs->rx_ctrl & HPC3_ERXCTRL_ACTIVE)) { |
| hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc + sp->rx_new); |
| seeq_go(sp, hregs, sregs); |
| } |
| } |
| |
| static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp, |
| struct hpc3_ethregs *hregs, |
| struct sgiseeq_regs *sregs) |
| { |
| struct sgiseeq_rx_desc *rd; |
| struct sk_buff *skb = NULL; |
| struct sk_buff *newskb; |
| unsigned char pkt_status; |
| int len = 0; |
| unsigned int orig_end = PREV_RX(sp->rx_new); |
| |
| /* Service every received packet. */ |
| rd = &sp->rx_desc[sp->rx_new]; |
| dma_sync_desc_cpu(dev, rd); |
| while (!(rd->rdma.cntinfo & HPCDMA_OWN)) { |
| len = PKT_BUF_SZ - (rd->rdma.cntinfo & HPCDMA_BCNT) - 3; |
| dma_unmap_single(dev->dev.parent, rd->rdma.pbuf, |
| PKT_BUF_SZ, DMA_FROM_DEVICE); |
| pkt_status = rd->skb->data[len]; |
| if (pkt_status & SEEQ_RSTAT_FIG) { |
| /* Packet is OK. */ |
| /* We don't want to receive our own packets */ |
| if (memcmp(rd->skb->data + 6, dev->dev_addr, ETH_ALEN)) { |
| if (len > rx_copybreak) { |
| skb = rd->skb; |
| newskb = netdev_alloc_skb(dev, PKT_BUF_SZ); |
| if (!newskb) { |
| newskb = skb; |
| skb = NULL; |
| goto memory_squeeze; |
| } |
| skb_reserve(newskb, 2); |
| } else { |
| skb = netdev_alloc_skb_ip_align(dev, len); |
| if (skb) |
| skb_copy_to_linear_data(skb, rd->skb->data, len); |
| |
| newskb = rd->skb; |
| } |
| memory_squeeze: |
| if (skb) { |
| skb_put(skb, len); |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_rx(skb); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += len; |
| } else { |
| printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", |
| dev->name); |
| dev->stats.rx_dropped++; |
| } |
| } else { |
| /* Silently drop my own packets */ |
| newskb = rd->skb; |
| } |
| } else { |
| record_rx_errors(dev, pkt_status); |
| newskb = rd->skb; |
| } |
| rd->skb = newskb; |
| rd->rdma.pbuf = dma_map_single(dev->dev.parent, |
| newskb->data - 2, |
| PKT_BUF_SZ, DMA_FROM_DEVICE); |
| |
| /* Return the entry to the ring pool. */ |
| rd->rdma.cntinfo = RCNTINFO_INIT; |
| sp->rx_new = NEXT_RX(sp->rx_new); |
| dma_sync_desc_dev(dev, rd); |
| rd = &sp->rx_desc[sp->rx_new]; |
| dma_sync_desc_cpu(dev, rd); |
| } |
| dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]); |
| sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR); |
| dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]); |
| dma_sync_desc_cpu(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); |
| sp->rx_desc[PREV_RX(sp->rx_new)].rdma.cntinfo |= HPCDMA_EOR; |
| dma_sync_desc_dev(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); |
| rx_maybe_restart(sp, hregs, sregs); |
| } |
| |
| static inline void tx_maybe_reset_collisions(struct sgiseeq_private *sp, |
| struct sgiseeq_regs *sregs) |
| { |
| if (sp->is_edlc) { |
| sregs->rw.wregs.control = sp->control & ~(SEEQ_CTRL_XCNT); |
| sregs->rw.wregs.control = sp->control; |
| } |
| } |
| |
| static inline void kick_tx(struct net_device *dev, |
| struct sgiseeq_private *sp, |
| struct hpc3_ethregs *hregs) |
| { |
| struct sgiseeq_tx_desc *td; |
| int i = sp->tx_old; |
| |
| /* If the HPC aint doin nothin, and there are more packets |
| * with ETXD cleared and XIU set we must make very certain |
| * that we restart the HPC else we risk locking up the |
| * adapter. The following code is only safe iff the HPCDMA |
| * is not active! |
| */ |
| td = &sp->tx_desc[i]; |
| dma_sync_desc_cpu(dev, td); |
| while ((td->tdma.cntinfo & (HPCDMA_XIU | HPCDMA_ETXD)) == |
| (HPCDMA_XIU | HPCDMA_ETXD)) { |
| i = NEXT_TX(i); |
| td = &sp->tx_desc[i]; |
| dma_sync_desc_cpu(dev, td); |
| } |
| if (td->tdma.cntinfo & HPCDMA_XIU) { |
| hregs->tx_ndptr = VIRT_TO_DMA(sp, td); |
| hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; |
| } |
| } |
| |
| static inline void sgiseeq_tx(struct net_device *dev, struct sgiseeq_private *sp, |
| struct hpc3_ethregs *hregs, |
| struct sgiseeq_regs *sregs) |
| { |
| struct sgiseeq_tx_desc *td; |
| unsigned long status = hregs->tx_ctrl; |
| int j; |
| |
| tx_maybe_reset_collisions(sp, sregs); |
| |
| if (!(status & (HPC3_ETXCTRL_ACTIVE | SEEQ_TSTAT_PTRANS))) { |
| /* Oops, HPC detected some sort of error. */ |
| if (status & SEEQ_TSTAT_R16) |
| dev->stats.tx_aborted_errors++; |
| if (status & SEEQ_TSTAT_UFLOW) |
| dev->stats.tx_fifo_errors++; |
| if (status & SEEQ_TSTAT_LCLS) |
| dev->stats.collisions++; |
| } |
| |
| /* Ack 'em... */ |
| for (j = sp->tx_old; j != sp->tx_new; j = NEXT_TX(j)) { |
| td = &sp->tx_desc[j]; |
| |
| dma_sync_desc_cpu(dev, td); |
| if (!(td->tdma.cntinfo & (HPCDMA_XIU))) |
| break; |
| if (!(td->tdma.cntinfo & (HPCDMA_ETXD))) { |
| if (!(status & HPC3_ETXCTRL_ACTIVE)) { |
| hregs->tx_ndptr = VIRT_TO_DMA(sp, td); |
| hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; |
| } |
| break; |
| } |
| dev->stats.tx_packets++; |
| sp->tx_old = NEXT_TX(sp->tx_old); |
| td->tdma.cntinfo &= ~(HPCDMA_XIU | HPCDMA_XIE); |
| td->tdma.cntinfo |= HPCDMA_EOX; |
| if (td->skb) { |
| dev_kfree_skb_any(td->skb); |
| td->skb = NULL; |
| } |
| dma_sync_desc_dev(dev, td); |
| } |
| } |
| |
| static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *) dev_id; |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct hpc3_ethregs *hregs = sp->hregs; |
| struct sgiseeq_regs *sregs = sp->sregs; |
| |
| spin_lock(&sp->tx_lock); |
| |
| /* Ack the IRQ and set software state. */ |
| hregs->reset = HPC3_ERST_CLRIRQ; |
| |
| /* Always check for received packets. */ |
| sgiseeq_rx(dev, sp, hregs, sregs); |
| |
| /* Only check for tx acks if we have something queued. */ |
| if (sp->tx_old != sp->tx_new) |
| sgiseeq_tx(dev, sp, hregs, sregs); |
| |
| if ((TX_BUFFS_AVAIL(sp) > 0) && netif_queue_stopped(dev)) { |
| netif_wake_queue(dev); |
| } |
| spin_unlock(&sp->tx_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sgiseeq_open(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct sgiseeq_regs *sregs = sp->sregs; |
| unsigned int irq = dev->irq; |
| int err; |
| |
| if (request_irq(irq, sgiseeq_interrupt, 0, sgiseeqstr, dev)) { |
| printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq); |
| return -EAGAIN; |
| } |
| |
| err = init_seeq(dev, sp, sregs); |
| if (err) |
| goto out_free_irq; |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| |
| out_free_irq: |
| free_irq(irq, dev); |
| |
| return err; |
| } |
| |
| static int sgiseeq_close(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct sgiseeq_regs *sregs = sp->sregs; |
| unsigned int irq = dev->irq; |
| |
| netif_stop_queue(dev); |
| |
| /* Shutdown the Seeq. */ |
| reset_hpc3_and_seeq(sp->hregs, sregs); |
| free_irq(irq, dev); |
| seeq_purge_ring(dev); |
| |
| return 0; |
| } |
| |
| static inline int sgiseeq_reset(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct sgiseeq_regs *sregs = sp->sregs; |
| int err; |
| |
| err = init_seeq(dev, sp, sregs); |
| if (err) |
| return err; |
| |
| dev->trans_start = jiffies; /* prevent tx timeout */ |
| netif_wake_queue(dev); |
| |
| return 0; |
| } |
| |
| static int sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| struct hpc3_ethregs *hregs = sp->hregs; |
| unsigned long flags; |
| struct sgiseeq_tx_desc *td; |
| int len, entry; |
| |
| spin_lock_irqsave(&sp->tx_lock, flags); |
| |
| /* Setup... */ |
| len = skb->len; |
| if (len < ETH_ZLEN) { |
| if (skb_padto(skb, ETH_ZLEN)) { |
| spin_unlock_irqrestore(&sp->tx_lock, flags); |
| return NETDEV_TX_OK; |
| } |
| len = ETH_ZLEN; |
| } |
| |
| dev->stats.tx_bytes += len; |
| entry = sp->tx_new; |
| td = &sp->tx_desc[entry]; |
| dma_sync_desc_cpu(dev, td); |
| |
| /* Create entry. There are so many races with adding a new |
| * descriptor to the chain: |
| * 1) Assume that the HPC is off processing a DMA chain while |
| * we are changing all of the following. |
| * 2) Do no allow the HPC to look at a new descriptor until |
| * we have completely set up it's state. This means, do |
| * not clear HPCDMA_EOX in the current last descritptor |
| * until the one we are adding looks consistent and could |
| * be processes right now. |
| * 3) The tx interrupt code must notice when we've added a new |
| * entry and the HPC got to the end of the chain before we |
| * added this new entry and restarted it. |
| */ |
| td->skb = skb; |
| td->tdma.pbuf = dma_map_single(dev->dev.parent, skb->data, |
| len, DMA_TO_DEVICE); |
| td->tdma.cntinfo = (len & HPCDMA_BCNT) | |
| HPCDMA_XIU | HPCDMA_EOXP | HPCDMA_XIE | HPCDMA_EOX; |
| dma_sync_desc_dev(dev, td); |
| if (sp->tx_old != sp->tx_new) { |
| struct sgiseeq_tx_desc *backend; |
| |
| backend = &sp->tx_desc[PREV_TX(sp->tx_new)]; |
| dma_sync_desc_cpu(dev, backend); |
| backend->tdma.cntinfo &= ~HPCDMA_EOX; |
| dma_sync_desc_dev(dev, backend); |
| } |
| sp->tx_new = NEXT_TX(sp->tx_new); /* Advance. */ |
| |
| /* Maybe kick the HPC back into motion. */ |
| if (!(hregs->tx_ctrl & HPC3_ETXCTRL_ACTIVE)) |
| kick_tx(dev, sp, hregs); |
| |
| if (!TX_BUFFS_AVAIL(sp)) |
| netif_stop_queue(dev); |
| spin_unlock_irqrestore(&sp->tx_lock, flags); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void timeout(struct net_device *dev) |
| { |
| printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name); |
| sgiseeq_reset(dev); |
| |
| dev->trans_start = jiffies; /* prevent tx timeout */ |
| netif_wake_queue(dev); |
| } |
| |
| static void sgiseeq_set_multicast(struct net_device *dev) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| unsigned char oldmode = sp->mode; |
| |
| if(dev->flags & IFF_PROMISC) |
| sp->mode = SEEQ_RCMD_RANY; |
| else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) |
| sp->mode = SEEQ_RCMD_RBMCAST; |
| else |
| sp->mode = SEEQ_RCMD_RBCAST; |
| |
| /* XXX I know this sucks, but is there a better way to reprogram |
| * XXX the receiver? At least, this shouldn't happen too often. |
| */ |
| |
| if (oldmode != sp->mode) |
| sgiseeq_reset(dev); |
| } |
| |
| static inline void setup_tx_ring(struct net_device *dev, |
| struct sgiseeq_tx_desc *buf, |
| int nbufs) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| int i = 0; |
| |
| while (i < (nbufs - 1)) { |
| buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); |
| buf[i].tdma.pbuf = 0; |
| dma_sync_desc_dev(dev, &buf[i]); |
| i++; |
| } |
| buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf); |
| dma_sync_desc_dev(dev, &buf[i]); |
| } |
| |
| static inline void setup_rx_ring(struct net_device *dev, |
| struct sgiseeq_rx_desc *buf, |
| int nbufs) |
| { |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| int i = 0; |
| |
| while (i < (nbufs - 1)) { |
| buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); |
| buf[i].rdma.pbuf = 0; |
| dma_sync_desc_dev(dev, &buf[i]); |
| i++; |
| } |
| buf[i].rdma.pbuf = 0; |
| buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf); |
| dma_sync_desc_dev(dev, &buf[i]); |
| } |
| |
| static const struct net_device_ops sgiseeq_netdev_ops = { |
| .ndo_open = sgiseeq_open, |
| .ndo_stop = sgiseeq_close, |
| .ndo_start_xmit = sgiseeq_start_xmit, |
| .ndo_tx_timeout = timeout, |
| .ndo_set_rx_mode = sgiseeq_set_multicast, |
| .ndo_set_mac_address = sgiseeq_set_mac_address, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int __devinit sgiseeq_probe(struct platform_device *pdev) |
| { |
| struct sgiseeq_platform_data *pd = pdev->dev.platform_data; |
| struct hpc3_regs *hpcregs = pd->hpc; |
| struct sgiseeq_init_block *sr; |
| unsigned int irq = pd->irq; |
| struct sgiseeq_private *sp; |
| struct net_device *dev; |
| int err; |
| |
| dev = alloc_etherdev(sizeof (struct sgiseeq_private)); |
| if (!dev) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| |
| platform_set_drvdata(pdev, dev); |
| sp = netdev_priv(dev); |
| |
| /* Make private data page aligned */ |
| sr = dma_alloc_noncoherent(&pdev->dev, sizeof(*sp->srings), |
| &sp->srings_dma, GFP_KERNEL); |
| if (!sr) { |
| printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); |
| err = -ENOMEM; |
| goto err_out_free_dev; |
| } |
| sp->srings = sr; |
| sp->rx_desc = sp->srings->rxvector; |
| sp->tx_desc = sp->srings->txvector; |
| spin_lock_init(&sp->tx_lock); |
| |
| /* A couple calculations now, saves many cycles later. */ |
| setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); |
| setup_tx_ring(dev, sp->tx_desc, SEEQ_TX_BUFFERS); |
| |
| memcpy(dev->dev_addr, pd->mac, ETH_ALEN); |
| |
| #ifdef DEBUG |
| gpriv = sp; |
| gdev = dev; |
| #endif |
| sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; |
| sp->hregs = &hpcregs->ethregs; |
| sp->name = sgiseeqstr; |
| sp->mode = SEEQ_RCMD_RBCAST; |
| |
| /* Setup PIO and DMA transfer timing */ |
| sp->hregs->pconfig = 0x161; |
| sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | |
| HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; |
| |
| /* Setup PIO and DMA transfer timing */ |
| sp->hregs->pconfig = 0x161; |
| sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | |
| HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; |
| |
| /* Reset the chip. */ |
| hpc3_eth_reset(sp->hregs); |
| |
| sp->is_edlc = !(sp->sregs->rw.rregs.collision_tx[0] & 0xff); |
| if (sp->is_edlc) |
| sp->control = SEEQ_CTRL_XCNT | SEEQ_CTRL_ACCNT | |
| SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT | |
| SEEQ_CTRL_ENCARR; |
| |
| dev->netdev_ops = &sgiseeq_netdev_ops; |
| dev->watchdog_timeo = (200 * HZ) / 1000; |
| dev->irq = irq; |
| |
| if (register_netdev(dev)) { |
| printk(KERN_ERR "Sgiseeq: Cannot register net device, " |
| "aborting.\n"); |
| err = -ENODEV; |
| goto err_out_free_page; |
| } |
| |
| printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); |
| |
| return 0; |
| |
| err_out_free_page: |
| free_page((unsigned long) sp->srings); |
| err_out_free_dev: |
| free_netdev(dev); |
| |
| err_out: |
| return err; |
| } |
| |
| static int __exit sgiseeq_remove(struct platform_device *pdev) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| struct sgiseeq_private *sp = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| dma_free_noncoherent(&pdev->dev, sizeof(*sp->srings), sp->srings, |
| sp->srings_dma); |
| free_netdev(dev); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static struct platform_driver sgiseeq_driver = { |
| .probe = sgiseeq_probe, |
| .remove = __exit_p(sgiseeq_remove), |
| .driver = { |
| .name = "sgiseeq", |
| .owner = THIS_MODULE, |
| } |
| }; |
| |
| module_platform_driver(sgiseeq_driver); |
| |
| MODULE_DESCRIPTION("SGI Seeq 8003 driver"); |
| MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:sgiseeq"); |