| ==================================================================== |
| Interaction of Suspend code (S3) with the CPU hotplug infrastructure |
| ==================================================================== |
| |
| (C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> |
| |
| |
| I. Differences between CPU hotplug and Suspend-to-RAM |
| ====================================================== |
| |
| How does the regular CPU hotplug code differ from how the Suspend-to-RAM |
| infrastructure uses it internally? And where do they share common code? |
| |
| Well, a picture is worth a thousand words... So ASCII art follows :-) |
| |
| [This depicts the current design in the kernel, and focusses only on the |
| interactions involving the freezer and CPU hotplug and also tries to explain |
| the locking involved. It outlines the notifications involved as well. |
| But please note that here, only the call paths are illustrated, with the aim |
| of describing where they take different paths and where they share code. |
| What happens when regular CPU hotplug and Suspend-to-RAM race with each other |
| is not depicted here.] |
| |
| On a high level, the suspend-resume cycle goes like this:: |
| |
| |Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw | |
| |tasks | | cpus | | | | cpus | |tasks| |
| |
| |
| More details follow:: |
| |
| Suspend call path |
| ----------------- |
| |
| Write 'mem' to |
| /sys/power/state |
| sysfs file |
| | |
| v |
| Acquire system_transition_mutex lock |
| | |
| v |
| Send PM_SUSPEND_PREPARE |
| notifications |
| | |
| v |
| Freeze tasks |
| | |
| | |
| v |
| disable_nonboot_cpus() |
| /* start */ |
| | |
| v |
| Acquire cpu_add_remove_lock |
| | |
| v |
| Iterate over CURRENTLY |
| online CPUs |
| | |
| | |
| | ---------- |
| v | L |
| ======> _cpu_down() | |
| | [This takes cpuhotplug.lock | |
| Common | before taking down the CPU | |
| code | and releases it when done] | O |
| | While it is at it, notifications | |
| | are sent when notable events occur, | |
| ======> by running all registered callbacks. | |
| | | O |
| | | |
| | | |
| v | |
| Note down these cpus in | P |
| frozen_cpus mask ---------- |
| | |
| v |
| Disable regular cpu hotplug |
| by increasing cpu_hotplug_disabled |
| | |
| v |
| Release cpu_add_remove_lock |
| | |
| v |
| /* disable_nonboot_cpus() complete */ |
| | |
| v |
| Do suspend |
| |
| |
| |
| Resuming back is likewise, with the counterparts being (in the order of |
| execution during resume): |
| |
| * enable_nonboot_cpus() which involves:: |
| |
| | Acquire cpu_add_remove_lock |
| | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug |
| | Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop] |
| | Release cpu_add_remove_lock |
| v |
| |
| * thaw tasks |
| * send PM_POST_SUSPEND notifications |
| * Release system_transition_mutex lock. |
| |
| |
| It is to be noted here that the system_transition_mutex lock is acquired at the |
| very beginning, when we are just starting out to suspend, and then released only |
| after the entire cycle is complete (i.e., suspend + resume). |
| |
| :: |
| |
| |
| |
| Regular CPU hotplug call path |
| ----------------------------- |
| |
| Write 0 (or 1) to |
| /sys/devices/system/cpu/cpu*/online |
| sysfs file |
| | |
| | |
| v |
| cpu_down() |
| | |
| v |
| Acquire cpu_add_remove_lock |
| | |
| v |
| If cpu_hotplug_disabled > 0 |
| return gracefully |
| | |
| | |
| v |
| ======> _cpu_down() |
| | [This takes cpuhotplug.lock |
| Common | before taking down the CPU |
| code | and releases it when done] |
| | While it is at it, notifications |
| | are sent when notable events occur, |
| ======> by running all registered callbacks. |
| | |
| | |
| v |
| Release cpu_add_remove_lock |
| [That's it!, for |
| regular CPU hotplug] |
| |
| |
| |
| So, as can be seen from the two diagrams (the parts marked as "Common code"), |
| regular CPU hotplug and the suspend code path converge at the _cpu_down() and |
| _cpu_up() functions. They differ in the arguments passed to these functions, |
| in that during regular CPU hotplug, 0 is passed for the 'tasks_frozen' |
| argument. But during suspend, since the tasks are already frozen by the time |
| the non-boot CPUs are offlined or onlined, the _cpu_*() functions are called |
| with the 'tasks_frozen' argument set to 1. |
| [See below for some known issues regarding this.] |
| |
| |
| Important files and functions/entry points: |
| ------------------------------------------- |
| |
| - kernel/power/process.c : freeze_processes(), thaw_processes() |
| - kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish() |
| - kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), |
| [disable|enable]_nonboot_cpus() |
| |
| |
| |
| II. What are the issues involved in CPU hotplug? |
| ------------------------------------------------ |
| |
| There are some interesting situations involving CPU hotplug and microcode |
| update on the CPUs, as discussed below: |
| |
| [Please bear in mind that the kernel requests the microcode images from |
| userspace, using the request_firmware() function defined in |
| drivers/base/firmware_loader/main.c] |
| |
| |
| a. When all the CPUs are identical: |
| |
| This is the most common situation and it is quite straightforward: we want |
| to apply the same microcode revision to each of the CPUs. |
| To give an example of x86, the collect_cpu_info() function defined in |
| arch/x86/kernel/microcode_core.c helps in discovering the type of the CPU |
| and thereby in applying the correct microcode revision to it. |
| But note that the kernel does not maintain a common microcode image for the |
| all CPUs, in order to handle case 'b' described below. |
| |
| |
| b. When some of the CPUs are different than the rest: |
| |
| In this case since we probably need to apply different microcode revisions |
| to different CPUs, the kernel maintains a copy of the correct microcode |
| image for each CPU (after appropriate CPU type/model discovery using |
| functions such as collect_cpu_info()). |
| |
| |
| c. When a CPU is physically hot-unplugged and a new (and possibly different |
| type of) CPU is hot-plugged into the system: |
| |
| In the current design of the kernel, whenever a CPU is taken offline during |
| a regular CPU hotplug operation, upon receiving the CPU_DEAD notification |
| (which is sent by the CPU hotplug code), the microcode update driver's |
| callback for that event reacts by freeing the kernel's copy of the |
| microcode image for that CPU. |
| |
| Hence, when a new CPU is brought online, since the kernel finds that it |
| doesn't have the microcode image, it does the CPU type/model discovery |
| afresh and then requests the userspace for the appropriate microcode image |
| for that CPU, which is subsequently applied. |
| |
| For example, in x86, the mc_cpu_callback() function (which is the microcode |
| update driver's callback registered for CPU hotplug events) calls |
| microcode_update_cpu() which would call microcode_init_cpu() in this case, |
| instead of microcode_resume_cpu() when it finds that the kernel doesn't |
| have a valid microcode image. This ensures that the CPU type/model |
| discovery is performed and the right microcode is applied to the CPU after |
| getting it from userspace. |
| |
| |
| d. Handling microcode update during suspend/hibernate: |
| |
| Strictly speaking, during a CPU hotplug operation which does not involve |
| physically removing or inserting CPUs, the CPUs are not actually powered |
| off during a CPU offline. They are just put to the lowest C-states possible. |
| Hence, in such a case, it is not really necessary to re-apply microcode |
| when the CPUs are brought back online, since they wouldn't have lost the |
| image during the CPU offline operation. |
| |
| This is the usual scenario encountered during a resume after a suspend. |
| However, in the case of hibernation, since all the CPUs are completely |
| powered off, during restore it becomes necessary to apply the microcode |
| images to all the CPUs. |
| |
| [Note that we don't expect someone to physically pull out nodes and insert |
| nodes with a different type of CPUs in-between a suspend-resume or a |
| hibernate/restore cycle.] |
| |
| In the current design of the kernel however, during a CPU offline operation |
| as part of the suspend/hibernate cycle (cpuhp_tasks_frozen is set), |
| the existing copy of microcode image in the kernel is not freed up. |
| And during the CPU online operations (during resume/restore), since the |
| kernel finds that it already has copies of the microcode images for all the |
| CPUs, it just applies them to the CPUs, avoiding any re-discovery of CPU |
| type/model and the need for validating whether the microcode revisions are |
| right for the CPUs or not (due to the above assumption that physical CPU |
| hotplug will not be done in-between suspend/resume or hibernate/restore |
| cycles). |
| |
| |
| III. Known problems |
| =================== |
| |
| Are there any known problems when regular CPU hotplug and suspend race |
| with each other? |
| |
| Yes, they are listed below: |
| |
| 1. When invoking regular CPU hotplug, the 'tasks_frozen' argument passed to |
| the _cpu_down() and _cpu_up() functions is *always* 0. |
| This might not reflect the true current state of the system, since the |
| tasks could have been frozen by an out-of-band event such as a suspend |
| operation in progress. Hence, the cpuhp_tasks_frozen variable will not |
| reflect the frozen state and the CPU hotplug callbacks which evaluate |
| that variable might execute the wrong code path. |
| |
| 2. If a regular CPU hotplug stress test happens to race with the freezer due |
| to a suspend operation in progress at the same time, then we could hit the |
| situation described below: |
| |
| * A regular cpu online operation continues its journey from userspace |
| into the kernel, since the freezing has not yet begun. |
| * Then freezer gets to work and freezes userspace. |
| * If cpu online has not yet completed the microcode update stuff by now, |
| it will now start waiting on the frozen userspace in the |
| TASK_UNINTERRUPTIBLE state, in order to get the microcode image. |
| * Now the freezer continues and tries to freeze the remaining tasks. But |
| due to this wait mentioned above, the freezer won't be able to freeze |
| the cpu online hotplug task and hence freezing of tasks fails. |
| |
| As a result of this task freezing failure, the suspend operation gets |
| aborted. |
