| /*: |
| * Hibernate support specific for ARM64 |
| * |
| * Derived from work on ARM hibernation support by: |
| * |
| * Ubuntu project, hibernation support for mach-dove |
| * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu) |
| * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.) |
| * https://lkml.org/lkml/2010/6/18/4 |
| * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html |
| * https://patchwork.kernel.org/patch/96442/ |
| * |
| * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> |
| * |
| * License terms: GNU General Public License (GPL) version 2 |
| */ |
| #define pr_fmt(x) "hibernate: " x |
| #include <linux/cpu.h> |
| #include <linux/kvm_host.h> |
| #include <linux/mm.h> |
| #include <linux/pm.h> |
| #include <linux/sched.h> |
| #include <linux/suspend.h> |
| #include <linux/utsname.h> |
| #include <linux/version.h> |
| |
| #include <asm/barrier.h> |
| #include <asm/cacheflush.h> |
| #include <asm/cputype.h> |
| #include <asm/daifflags.h> |
| #include <asm/irqflags.h> |
| #include <asm/kexec.h> |
| #include <asm/memory.h> |
| #include <asm/mmu_context.h> |
| #include <asm/pgalloc.h> |
| #include <asm/pgtable.h> |
| #include <asm/pgtable-hwdef.h> |
| #include <asm/sections.h> |
| #include <asm/smp.h> |
| #include <asm/smp_plat.h> |
| #include <asm/suspend.h> |
| #include <asm/sysreg.h> |
| #include <asm/virt.h> |
| |
| /* |
| * Hibernate core relies on this value being 0 on resume, and marks it |
| * __nosavedata assuming it will keep the resume kernel's '0' value. This |
| * doesn't happen with either KASLR. |
| * |
| * defined as "__visible int in_suspend __nosavedata" in |
| * kernel/power/hibernate.c |
| */ |
| extern int in_suspend; |
| |
| /* Do we need to reset el2? */ |
| #define el2_reset_needed() (is_hyp_mode_available() && !is_kernel_in_hyp_mode()) |
| |
| /* temporary el2 vectors in the __hibernate_exit_text section. */ |
| extern char hibernate_el2_vectors[]; |
| |
| /* hyp-stub vectors, used to restore el2 during resume from hibernate. */ |
| extern char __hyp_stub_vectors[]; |
| |
| /* |
| * The logical cpu number we should resume on, initialised to a non-cpu |
| * number. |
| */ |
| static int sleep_cpu = -EINVAL; |
| |
| /* |
| * Values that may not change over hibernate/resume. We put the build number |
| * and date in here so that we guarantee not to resume with a different |
| * kernel. |
| */ |
| struct arch_hibernate_hdr_invariants { |
| char uts_version[__NEW_UTS_LEN + 1]; |
| }; |
| |
| /* These values need to be know across a hibernate/restore. */ |
| static struct arch_hibernate_hdr { |
| struct arch_hibernate_hdr_invariants invariants; |
| |
| /* These are needed to find the relocated kernel if built with kaslr */ |
| phys_addr_t ttbr1_el1; |
| void (*reenter_kernel)(void); |
| |
| /* |
| * We need to know where the __hyp_stub_vectors are after restore to |
| * re-configure el2. |
| */ |
| phys_addr_t __hyp_stub_vectors; |
| |
| u64 sleep_cpu_mpidr; |
| } resume_hdr; |
| |
| static inline void arch_hdr_invariants(struct arch_hibernate_hdr_invariants *i) |
| { |
| memset(i, 0, sizeof(*i)); |
| memcpy(i->uts_version, init_utsname()->version, sizeof(i->uts_version)); |
| } |
| |
| int pfn_is_nosave(unsigned long pfn) |
| { |
| unsigned long nosave_begin_pfn = sym_to_pfn(&__nosave_begin); |
| unsigned long nosave_end_pfn = sym_to_pfn(&__nosave_end - 1); |
| |
| return ((pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn)) || |
| crash_is_nosave(pfn); |
| } |
| |
| void notrace save_processor_state(void) |
| { |
| WARN_ON(num_online_cpus() != 1); |
| } |
| |
| void notrace restore_processor_state(void) |
| { |
| } |
| |
| int arch_hibernation_header_save(void *addr, unsigned int max_size) |
| { |
| struct arch_hibernate_hdr *hdr = addr; |
| |
| if (max_size < sizeof(*hdr)) |
| return -EOVERFLOW; |
| |
| arch_hdr_invariants(&hdr->invariants); |
| hdr->ttbr1_el1 = __pa_symbol(swapper_pg_dir); |
| hdr->reenter_kernel = _cpu_resume; |
| |
| /* We can't use __hyp_get_vectors() because kvm may still be loaded */ |
| if (el2_reset_needed()) |
| hdr->__hyp_stub_vectors = __pa_symbol(__hyp_stub_vectors); |
| else |
| hdr->__hyp_stub_vectors = 0; |
| |
| /* Save the mpidr of the cpu we called cpu_suspend() on... */ |
| if (sleep_cpu < 0) { |
| pr_err("Failing to hibernate on an unknown CPU.\n"); |
| return -ENODEV; |
| } |
| hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu); |
| pr_info("Hibernating on CPU %d [mpidr:0x%llx]\n", sleep_cpu, |
| hdr->sleep_cpu_mpidr); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(arch_hibernation_header_save); |
| |
| int arch_hibernation_header_restore(void *addr) |
| { |
| int ret; |
| struct arch_hibernate_hdr_invariants invariants; |
| struct arch_hibernate_hdr *hdr = addr; |
| |
| arch_hdr_invariants(&invariants); |
| if (memcmp(&hdr->invariants, &invariants, sizeof(invariants))) { |
| pr_crit("Hibernate image not generated by this kernel!\n"); |
| return -EINVAL; |
| } |
| |
| sleep_cpu = get_logical_index(hdr->sleep_cpu_mpidr); |
| pr_info("Hibernated on CPU %d [mpidr:0x%llx]\n", sleep_cpu, |
| hdr->sleep_cpu_mpidr); |
| if (sleep_cpu < 0) { |
| pr_crit("Hibernated on a CPU not known to this kernel!\n"); |
| sleep_cpu = -EINVAL; |
| return -EINVAL; |
| } |
| if (!cpu_online(sleep_cpu)) { |
| pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); |
| ret = cpu_up(sleep_cpu); |
| if (ret) { |
| pr_err("Failed to bring hibernate-CPU up!\n"); |
| sleep_cpu = -EINVAL; |
| return ret; |
| } |
| } |
| |
| resume_hdr = *hdr; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(arch_hibernation_header_restore); |
| |
| /* |
| * Copies length bytes, starting at src_start into an new page, |
| * perform cache maintentance, then maps it at the specified address low |
| * address as executable. |
| * |
| * This is used by hibernate to copy the code it needs to execute when |
| * overwriting the kernel text. This function generates a new set of page |
| * tables, which it loads into ttbr0. |
| * |
| * Length is provided as we probably only want 4K of data, even on a 64K |
| * page system. |
| */ |
| static int create_safe_exec_page(void *src_start, size_t length, |
| unsigned long dst_addr, |
| phys_addr_t *phys_dst_addr, |
| void *(*allocator)(gfp_t mask), |
| gfp_t mask) |
| { |
| int rc = 0; |
| pgd_t *pgdp; |
| pud_t *pudp; |
| pmd_t *pmdp; |
| pte_t *ptep; |
| unsigned long dst = (unsigned long)allocator(mask); |
| |
| if (!dst) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy((void *)dst, src_start, length); |
| flush_icache_range(dst, dst + length); |
| |
| pgdp = pgd_offset_raw(allocator(mask), dst_addr); |
| if (pgd_none(READ_ONCE(*pgdp))) { |
| pudp = allocator(mask); |
| if (!pudp) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| pgd_populate(&init_mm, pgdp, pudp); |
| } |
| |
| pudp = pud_offset(pgdp, dst_addr); |
| if (pud_none(READ_ONCE(*pudp))) { |
| pmdp = allocator(mask); |
| if (!pmdp) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| pud_populate(&init_mm, pudp, pmdp); |
| } |
| |
| pmdp = pmd_offset(pudp, dst_addr); |
| if (pmd_none(READ_ONCE(*pmdp))) { |
| ptep = allocator(mask); |
| if (!ptep) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| pmd_populate_kernel(&init_mm, pmdp, ptep); |
| } |
| |
| ptep = pte_offset_kernel(pmdp, dst_addr); |
| set_pte(ptep, pfn_pte(virt_to_pfn(dst), PAGE_KERNEL_EXEC)); |
| |
| /* |
| * Load our new page tables. A strict BBM approach requires that we |
| * ensure that TLBs are free of any entries that may overlap with the |
| * global mappings we are about to install. |
| * |
| * For a real hibernate/resume cycle TTBR0 currently points to a zero |
| * page, but TLBs may contain stale ASID-tagged entries (e.g. for EFI |
| * runtime services), while for a userspace-driven test_resume cycle it |
| * points to userspace page tables (and we must point it at a zero page |
| * ourselves). Elsewhere we only (un)install the idmap with preemption |
| * disabled, so T0SZ should be as required regardless. |
| */ |
| cpu_set_reserved_ttbr0(); |
| local_flush_tlb_all(); |
| write_sysreg(phys_to_ttbr(virt_to_phys(pgdp)), ttbr0_el1); |
| isb(); |
| |
| *phys_dst_addr = virt_to_phys((void *)dst); |
| |
| out: |
| return rc; |
| } |
| |
| #define dcache_clean_range(start, end) __flush_dcache_area(start, (end - start)) |
| |
| int swsusp_arch_suspend(void) |
| { |
| int ret = 0; |
| unsigned long flags; |
| struct sleep_stack_data state; |
| |
| if (cpus_are_stuck_in_kernel()) { |
| pr_err("Can't hibernate: no mechanism to offline secondary CPUs.\n"); |
| return -EBUSY; |
| } |
| |
| flags = local_daif_save(); |
| |
| if (__cpu_suspend_enter(&state)) { |
| /* make the crash dump kernel image visible/saveable */ |
| crash_prepare_suspend(); |
| |
| sleep_cpu = smp_processor_id(); |
| ret = swsusp_save(); |
| } else { |
| /* Clean kernel core startup/idle code to PoC*/ |
| dcache_clean_range(__mmuoff_data_start, __mmuoff_data_end); |
| dcache_clean_range(__idmap_text_start, __idmap_text_end); |
| |
| /* Clean kvm setup code to PoC? */ |
| if (el2_reset_needed()) |
| dcache_clean_range(__hyp_idmap_text_start, __hyp_idmap_text_end); |
| |
| /* make the crash dump kernel image protected again */ |
| crash_post_resume(); |
| |
| /* |
| * Tell the hibernation core that we've just restored |
| * the memory |
| */ |
| in_suspend = 0; |
| |
| sleep_cpu = -EINVAL; |
| __cpu_suspend_exit(); |
| } |
| |
| local_daif_restore(flags); |
| |
| return ret; |
| } |
| |
| static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr) |
| { |
| pte_t pte = READ_ONCE(*src_ptep); |
| |
| if (pte_valid(pte)) { |
| /* |
| * Resume will overwrite areas that may be marked |
| * read only (code, rodata). Clear the RDONLY bit from |
| * the temporary mappings we use during restore. |
| */ |
| set_pte(dst_ptep, pte_mkwrite(pte)); |
| } else if (debug_pagealloc_enabled() && !pte_none(pte)) { |
| /* |
| * debug_pagealloc will removed the PTE_VALID bit if |
| * the page isn't in use by the resume kernel. It may have |
| * been in use by the original kernel, in which case we need |
| * to put it back in our copy to do the restore. |
| * |
| * Before marking this entry valid, check the pfn should |
| * be mapped. |
| */ |
| BUG_ON(!pfn_valid(pte_pfn(pte))); |
| |
| set_pte(dst_ptep, pte_mkpresent(pte_mkwrite(pte))); |
| } |
| } |
| |
| static int copy_pte(pmd_t *dst_pmdp, pmd_t *src_pmdp, unsigned long start, |
| unsigned long end) |
| { |
| pte_t *src_ptep; |
| pte_t *dst_ptep; |
| unsigned long addr = start; |
| |
| dst_ptep = (pte_t *)get_safe_page(GFP_ATOMIC); |
| if (!dst_ptep) |
| return -ENOMEM; |
| pmd_populate_kernel(&init_mm, dst_pmdp, dst_ptep); |
| dst_ptep = pte_offset_kernel(dst_pmdp, start); |
| |
| src_ptep = pte_offset_kernel(src_pmdp, start); |
| do { |
| _copy_pte(dst_ptep, src_ptep, addr); |
| } while (dst_ptep++, src_ptep++, addr += PAGE_SIZE, addr != end); |
| |
| return 0; |
| } |
| |
| static int copy_pmd(pud_t *dst_pudp, pud_t *src_pudp, unsigned long start, |
| unsigned long end) |
| { |
| pmd_t *src_pmdp; |
| pmd_t *dst_pmdp; |
| unsigned long next; |
| unsigned long addr = start; |
| |
| if (pud_none(READ_ONCE(*dst_pudp))) { |
| dst_pmdp = (pmd_t *)get_safe_page(GFP_ATOMIC); |
| if (!dst_pmdp) |
| return -ENOMEM; |
| pud_populate(&init_mm, dst_pudp, dst_pmdp); |
| } |
| dst_pmdp = pmd_offset(dst_pudp, start); |
| |
| src_pmdp = pmd_offset(src_pudp, start); |
| do { |
| pmd_t pmd = READ_ONCE(*src_pmdp); |
| |
| next = pmd_addr_end(addr, end); |
| if (pmd_none(pmd)) |
| continue; |
| if (pmd_table(pmd)) { |
| if (copy_pte(dst_pmdp, src_pmdp, addr, next)) |
| return -ENOMEM; |
| } else { |
| set_pmd(dst_pmdp, |
| __pmd(pmd_val(pmd) & ~PMD_SECT_RDONLY)); |
| } |
| } while (dst_pmdp++, src_pmdp++, addr = next, addr != end); |
| |
| return 0; |
| } |
| |
| static int copy_pud(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start, |
| unsigned long end) |
| { |
| pud_t *dst_pudp; |
| pud_t *src_pudp; |
| unsigned long next; |
| unsigned long addr = start; |
| |
| if (pgd_none(READ_ONCE(*dst_pgdp))) { |
| dst_pudp = (pud_t *)get_safe_page(GFP_ATOMIC); |
| if (!dst_pudp) |
| return -ENOMEM; |
| pgd_populate(&init_mm, dst_pgdp, dst_pudp); |
| } |
| dst_pudp = pud_offset(dst_pgdp, start); |
| |
| src_pudp = pud_offset(src_pgdp, start); |
| do { |
| pud_t pud = READ_ONCE(*src_pudp); |
| |
| next = pud_addr_end(addr, end); |
| if (pud_none(pud)) |
| continue; |
| if (pud_table(pud)) { |
| if (copy_pmd(dst_pudp, src_pudp, addr, next)) |
| return -ENOMEM; |
| } else { |
| set_pud(dst_pudp, |
| __pud(pud_val(pud) & ~PMD_SECT_RDONLY)); |
| } |
| } while (dst_pudp++, src_pudp++, addr = next, addr != end); |
| |
| return 0; |
| } |
| |
| static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start, |
| unsigned long end) |
| { |
| unsigned long next; |
| unsigned long addr = start; |
| pgd_t *src_pgdp = pgd_offset_k(start); |
| |
| dst_pgdp = pgd_offset_raw(dst_pgdp, start); |
| do { |
| next = pgd_addr_end(addr, end); |
| if (pgd_none(READ_ONCE(*src_pgdp))) |
| continue; |
| if (copy_pud(dst_pgdp, src_pgdp, addr, next)) |
| return -ENOMEM; |
| } while (dst_pgdp++, src_pgdp++, addr = next, addr != end); |
| |
| return 0; |
| } |
| |
| /* |
| * Setup then Resume from the hibernate image using swsusp_arch_suspend_exit(). |
| * |
| * Memory allocated by get_safe_page() will be dealt with by the hibernate code, |
| * we don't need to free it here. |
| */ |
| int swsusp_arch_resume(void) |
| { |
| int rc = 0; |
| void *zero_page; |
| size_t exit_size; |
| pgd_t *tmp_pg_dir; |
| phys_addr_t phys_hibernate_exit; |
| void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *, |
| void *, phys_addr_t, phys_addr_t); |
| |
| /* |
| * Restoring the memory image will overwrite the ttbr1 page tables. |
| * Create a second copy of just the linear map, and use this when |
| * restoring. |
| */ |
| tmp_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC); |
| if (!tmp_pg_dir) { |
| pr_err("Failed to allocate memory for temporary page tables.\n"); |
| rc = -ENOMEM; |
| goto out; |
| } |
| rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, 0); |
| if (rc) |
| goto out; |
| |
| /* |
| * We need a zero page that is zero before & after resume in order to |
| * to break before make on the ttbr1 page tables. |
| */ |
| zero_page = (void *)get_safe_page(GFP_ATOMIC); |
| if (!zero_page) { |
| pr_err("Failed to allocate zero page.\n"); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Locate the exit code in the bottom-but-one page, so that *NULL |
| * still has disastrous affects. |
| */ |
| hibernate_exit = (void *)PAGE_SIZE; |
| exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start; |
| /* |
| * Copy swsusp_arch_suspend_exit() to a safe page. This will generate |
| * a new set of ttbr0 page tables and load them. |
| */ |
| rc = create_safe_exec_page(__hibernate_exit_text_start, exit_size, |
| (unsigned long)hibernate_exit, |
| &phys_hibernate_exit, |
| (void *)get_safe_page, GFP_ATOMIC); |
| if (rc) { |
| pr_err("Failed to create safe executable page for hibernate_exit code.\n"); |
| goto out; |
| } |
| |
| /* |
| * The hibernate exit text contains a set of el2 vectors, that will |
| * be executed at el2 with the mmu off in order to reload hyp-stub. |
| */ |
| __flush_dcache_area(hibernate_exit, exit_size); |
| |
| /* |
| * KASLR will cause the el2 vectors to be in a different location in |
| * the resumed kernel. Load hibernate's temporary copy into el2. |
| * |
| * We can skip this step if we booted at EL1, or are running with VHE. |
| */ |
| if (el2_reset_needed()) { |
| phys_addr_t el2_vectors = phys_hibernate_exit; /* base */ |
| el2_vectors += hibernate_el2_vectors - |
| __hibernate_exit_text_start; /* offset */ |
| |
| __hyp_set_vectors(el2_vectors); |
| } |
| |
| hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1, |
| resume_hdr.reenter_kernel, restore_pblist, |
| resume_hdr.__hyp_stub_vectors, virt_to_phys(zero_page)); |
| |
| out: |
| return rc; |
| } |
| |
| int hibernate_resume_nonboot_cpu_disable(void) |
| { |
| if (sleep_cpu < 0) { |
| pr_err("Failing to resume from hibernate on an unknown CPU.\n"); |
| return -ENODEV; |
| } |
| |
| return freeze_secondary_cpus(sleep_cpu); |
| } |