| /***********************license start************************************ |
| * Copyright (c) 2003-2017 Cavium, Inc. |
| * All rights reserved. |
| * |
| * License: one of 'Cavium License' or 'GNU General Public License Version 2' |
| * |
| * This file is provided under the terms of the Cavium License (see below) |
| * or under the terms of GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. When using or redistributing |
| * this file, you may do so under either license. |
| * |
| * Cavium License: Redistribution and use in source and binary forms, with |
| * or without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Cavium Inc. nor the names of its contributors may be |
| * used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * This Software, including technical data, may be subject to U.S. export |
| * control laws, including the U.S. Export Administration Act and its |
| * associated regulations, and may be subject to export or import |
| * regulations in other countries. |
| * |
| * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" |
| * AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS |
| * OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH |
| * RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY |
| * REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT |
| * DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) |
| * WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A |
| * PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET |
| * ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE |
| * ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES |
| * WITH YOU. |
| ***********************license end**************************************/ |
| |
| #ifndef __COMMON_H__ |
| #define __COMMON_H__ |
| |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/seq_file.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/version.h> |
| |
| /* Device specific zlib function definitions */ |
| #include "zip_device.h" |
| |
| /* ZIP device definitions */ |
| #include "zip_main.h" |
| |
| /* ZIP memory allocation/deallocation related definitions */ |
| #include "zip_mem.h" |
| |
| /* Device specific structure definitions */ |
| #include "zip_regs.h" |
| |
| #define ZIP_ERROR -1 |
| |
| #define ZIP_FLUSH_FINISH 4 |
| |
| #define RAW_FORMAT 0 /* for rawpipe */ |
| #define ZLIB_FORMAT 1 /* for zpipe */ |
| #define GZIP_FORMAT 2 /* for gzpipe */ |
| #define LZS_FORMAT 3 /* for lzspipe */ |
| |
| /* Max number of ZIP devices supported */ |
| #define MAX_ZIP_DEVICES 2 |
| |
| /* Configures the number of zip queues to be used */ |
| #define ZIP_NUM_QUEUES 2 |
| |
| #define DYNAMIC_STOP_EXCESS 1024 |
| |
| /* Maximum buffer sizes in direct mode */ |
| #define MAX_INPUT_BUFFER_SIZE (64 * 1024) |
| #define MAX_OUTPUT_BUFFER_SIZE (64 * 1024) |
| |
| /** |
| * struct zip_operation - common data structure for comp and decomp operations |
| * @input: Next input byte is read from here |
| * @output: Next output byte written here |
| * @ctx_addr: Inflate context buffer address |
| * @history: Pointer to the history buffer |
| * @input_len: Number of bytes available at next_in |
| * @input_total_len: Total number of input bytes read |
| * @output_len: Remaining free space at next_out |
| * @output_total_len: Total number of bytes output so far |
| * @csum: Checksum value of the uncompressed data |
| * @flush: Flush flag |
| * @format: Format (depends on stream's wrap) |
| * @speed: Speed depends on stream's level |
| * @ccode: Compression code ( stream's strategy) |
| * @lzs_flag: Flag for LZS support |
| * @begin_file: Beginning of file indication for inflate |
| * @history_len: Size of the history data |
| * @end_file: Ending of the file indication for inflate |
| * @compcode: Completion status of the ZIP invocation |
| * @bytes_read: Input bytes read in current instruction |
| * @bits_processed: Total bits processed for entire file |
| * @sizeofptr: To distinguish between ILP32 and LP64 |
| * @sizeofzops: Optional just for padding |
| * |
| * This structure is used to maintain the required meta data for the |
| * comp and decomp operations. |
| */ |
| struct zip_operation { |
| u8 *input; |
| u8 *output; |
| u64 ctx_addr; |
| u64 history; |
| |
| u32 input_len; |
| u32 input_total_len; |
| |
| u32 output_len; |
| u32 output_total_len; |
| |
| u32 csum; |
| u32 flush; |
| |
| u32 format; |
| u32 speed; |
| u32 ccode; |
| u32 lzs_flag; |
| |
| u32 begin_file; |
| u32 history_len; |
| |
| u32 end_file; |
| u32 compcode; |
| u32 bytes_read; |
| u32 bits_processed; |
| |
| u32 sizeofptr; |
| u32 sizeofzops; |
| }; |
| |
| static inline int zip_poll_result(union zip_zres_s *result) |
| { |
| int retries = 1000; |
| |
| while (!result->s.compcode) { |
| if (!--retries) { |
| pr_err("ZIP ERR: request timed out"); |
| return -ETIMEDOUT; |
| } |
| udelay(10); |
| /* |
| * Force re-reading of compcode which is updated |
| * by the ZIP coprocessor. |
| */ |
| rmb(); |
| } |
| return 0; |
| } |
| |
| /* error messages */ |
| #define zip_err(fmt, args...) pr_err("ZIP ERR:%s():%d: " \ |
| fmt "\n", __func__, __LINE__, ## args) |
| |
| #ifdef MSG_ENABLE |
| /* Enable all messages */ |
| #define zip_msg(fmt, args...) pr_info("ZIP_MSG:" fmt "\n", ## args) |
| #else |
| #define zip_msg(fmt, args...) |
| #endif |
| |
| #if defined(ZIP_DEBUG_ENABLE) && defined(MSG_ENABLE) |
| |
| #ifdef DEBUG_LEVEL |
| |
| #define FILE_NAME (strrchr(__FILE__, '/') ? strrchr(__FILE__, '/') + 1 : \ |
| strrchr(__FILE__, '\\') ? strrchr(__FILE__, '\\') + 1 : __FILE__) |
| |
| #if DEBUG_LEVEL >= 4 |
| |
| #define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s: %s() : %d: " \ |
| fmt "\n", FILE_NAME, __func__, __LINE__, ## args) |
| |
| #elif DEBUG_LEVEL >= 3 |
| |
| #define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s: %s() : %d: " \ |
| fmt "\n", FILE_NAME, __func__, __LINE__, ## args) |
| |
| #elif DEBUG_LEVEL >= 2 |
| |
| #define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s() : %d: " \ |
| fmt "\n", __func__, __LINE__, ## args) |
| |
| #else |
| |
| #define zip_dbg(fmt, args...) pr_info("ZIP DBG:" fmt "\n", ## args) |
| |
| #endif /* DEBUG LEVEL >=4 */ |
| |
| #else |
| |
| #define zip_dbg(fmt, args...) pr_info("ZIP DBG:" fmt "\n", ## args) |
| |
| #endif /* DEBUG_LEVEL */ |
| #else |
| |
| #define zip_dbg(fmt, args...) |
| |
| #endif /* ZIP_DEBUG_ENABLE && MSG_ENABLE*/ |
| |
| #endif |