| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * phy-brcm-usb.c - Broadcom USB Phy Driver |
| * |
| * Copyright (C) 2015-2017 Broadcom |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/soc/brcmstb/brcmstb.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <linux/mfd/syscon.h> |
| |
| #include "phy-brcm-usb-init.h" |
| |
| static DEFINE_MUTEX(sysfs_lock); |
| |
| enum brcm_usb_phy_id { |
| BRCM_USB_PHY_2_0 = 0, |
| BRCM_USB_PHY_3_0, |
| BRCM_USB_PHY_ID_MAX |
| }; |
| |
| struct value_to_name_map { |
| int value; |
| const char *name; |
| }; |
| |
| struct match_chip_info { |
| void *init_func; |
| u8 required_regs[BRCM_REGS_MAX + 1]; |
| u8 optional_reg; |
| }; |
| |
| static const struct value_to_name_map brcm_dr_mode_to_name[] = { |
| { USB_CTLR_MODE_HOST, "host" }, |
| { USB_CTLR_MODE_DEVICE, "peripheral" }, |
| { USB_CTLR_MODE_DRD, "drd" }, |
| { USB_CTLR_MODE_TYPEC_PD, "typec-pd" } |
| }; |
| |
| static const struct value_to_name_map brcm_dual_mode_to_name[] = { |
| { 0, "host" }, |
| { 1, "device" }, |
| { 2, "auto" }, |
| }; |
| |
| struct brcm_usb_phy { |
| struct phy *phy; |
| unsigned int id; |
| bool inited; |
| }; |
| |
| struct brcm_usb_phy_data { |
| struct brcm_usb_init_params ini; |
| bool has_eohci; |
| bool has_xhci; |
| struct clk *usb_20_clk; |
| struct clk *usb_30_clk; |
| struct clk *suspend_clk; |
| struct mutex mutex; /* serialize phy init */ |
| int init_count; |
| int wake_irq; |
| struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; |
| }; |
| |
| static s8 *node_reg_names[BRCM_REGS_MAX] = { |
| "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" |
| }; |
| |
| static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) |
| { |
| struct phy *gphy = dev_id; |
| |
| pm_wakeup_event(&gphy->dev, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int brcm_usb_phy_init(struct phy *gphy) |
| { |
| struct brcm_usb_phy *phy = phy_get_drvdata(gphy); |
| struct brcm_usb_phy_data *priv = |
| container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); |
| |
| /* |
| * Use a lock to make sure a second caller waits until |
| * the base phy is inited before using it. |
| */ |
| mutex_lock(&priv->mutex); |
| if (priv->init_count++ == 0) { |
| clk_prepare_enable(priv->usb_20_clk); |
| clk_prepare_enable(priv->usb_30_clk); |
| clk_prepare_enable(priv->suspend_clk); |
| brcm_usb_init_common(&priv->ini); |
| } |
| mutex_unlock(&priv->mutex); |
| if (phy->id == BRCM_USB_PHY_2_0) |
| brcm_usb_init_eohci(&priv->ini); |
| else if (phy->id == BRCM_USB_PHY_3_0) |
| brcm_usb_init_xhci(&priv->ini); |
| phy->inited = true; |
| dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id, |
| priv->init_count); |
| |
| return 0; |
| } |
| |
| static int brcm_usb_phy_exit(struct phy *gphy) |
| { |
| struct brcm_usb_phy *phy = phy_get_drvdata(gphy); |
| struct brcm_usb_phy_data *priv = |
| container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); |
| |
| dev_dbg(&gphy->dev, "EXIT\n"); |
| if (phy->id == BRCM_USB_PHY_2_0) |
| brcm_usb_uninit_eohci(&priv->ini); |
| if (phy->id == BRCM_USB_PHY_3_0) |
| brcm_usb_uninit_xhci(&priv->ini); |
| |
| /* If both xhci and eohci are gone, reset everything else */ |
| mutex_lock(&priv->mutex); |
| if (--priv->init_count == 0) { |
| brcm_usb_uninit_common(&priv->ini); |
| clk_disable_unprepare(priv->usb_20_clk); |
| clk_disable_unprepare(priv->usb_30_clk); |
| clk_disable_unprepare(priv->suspend_clk); |
| } |
| mutex_unlock(&priv->mutex); |
| phy->inited = false; |
| return 0; |
| } |
| |
| static const struct phy_ops brcm_usb_phy_ops = { |
| .init = brcm_usb_phy_init, |
| .exit = brcm_usb_phy_exit, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy *brcm_usb_phy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct brcm_usb_phy_data *data = dev_get_drvdata(dev); |
| |
| /* |
| * values 0 and 1 are for backward compatibility with |
| * device tree nodes from older bootloaders. |
| */ |
| switch (args->args[0]) { |
| case 0: |
| case PHY_TYPE_USB2: |
| if (data->phys[BRCM_USB_PHY_2_0].phy) |
| return data->phys[BRCM_USB_PHY_2_0].phy; |
| dev_warn(dev, "Error, 2.0 Phy not found\n"); |
| break; |
| case 1: |
| case PHY_TYPE_USB3: |
| if (data->phys[BRCM_USB_PHY_3_0].phy) |
| return data->phys[BRCM_USB_PHY_3_0].phy; |
| dev_warn(dev, "Error, 3.0 Phy not found\n"); |
| break; |
| } |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static int name_to_value(const struct value_to_name_map *table, int count, |
| const char *name, int *value) |
| { |
| int x; |
| |
| *value = 0; |
| for (x = 0; x < count; x++) { |
| if (sysfs_streq(name, table[x].name)) { |
| *value = x; |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static const char *value_to_name(const struct value_to_name_map *table, int count, |
| int value) |
| { |
| if (value >= count) |
| return "unknown"; |
| return table[value].name; |
| } |
| |
| static ssize_t dr_mode_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", |
| value_to_name(&brcm_dr_mode_to_name[0], |
| ARRAY_SIZE(brcm_dr_mode_to_name), |
| priv->ini.mode)); |
| } |
| static DEVICE_ATTR_RO(dr_mode); |
| |
| static ssize_t dual_select_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); |
| int value; |
| int res; |
| |
| mutex_lock(&sysfs_lock); |
| res = name_to_value(&brcm_dual_mode_to_name[0], |
| ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); |
| if (!res) { |
| brcm_usb_set_dual_select(&priv->ini, value); |
| res = len; |
| } |
| mutex_unlock(&sysfs_lock); |
| return res; |
| } |
| |
| static ssize_t dual_select_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); |
| int value; |
| |
| mutex_lock(&sysfs_lock); |
| value = brcm_usb_get_dual_select(&priv->ini); |
| mutex_unlock(&sysfs_lock); |
| return sprintf(buf, "%s\n", |
| value_to_name(&brcm_dual_mode_to_name[0], |
| ARRAY_SIZE(brcm_dual_mode_to_name), |
| value)); |
| } |
| static DEVICE_ATTR_RW(dual_select); |
| |
| static struct attribute *brcm_usb_phy_attrs[] = { |
| &dev_attr_dr_mode.attr, |
| &dev_attr_dual_select.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group brcm_usb_phy_group = { |
| .attrs = brcm_usb_phy_attrs, |
| }; |
| |
| static const struct match_chip_info chip_info_7216 = { |
| .init_func = &brcm_usb_dvr_init_7216, |
| .required_regs = { |
| BRCM_REGS_CTRL, |
| BRCM_REGS_XHCI_EC, |
| BRCM_REGS_XHCI_GBL, |
| -1, |
| }, |
| }; |
| |
| static const struct match_chip_info chip_info_7211b0 = { |
| .init_func = &brcm_usb_dvr_init_7211b0, |
| .required_regs = { |
| BRCM_REGS_CTRL, |
| BRCM_REGS_XHCI_EC, |
| BRCM_REGS_XHCI_GBL, |
| BRCM_REGS_USB_PHY, |
| BRCM_REGS_USB_MDIO, |
| -1, |
| }, |
| .optional_reg = BRCM_REGS_BDC_EC, |
| }; |
| |
| static const struct match_chip_info chip_info_7445 = { |
| .init_func = &brcm_usb_dvr_init_7445, |
| .required_regs = { |
| BRCM_REGS_CTRL, |
| BRCM_REGS_XHCI_EC, |
| -1, |
| }, |
| }; |
| |
| static const struct of_device_id brcm_usb_dt_ids[] = { |
| { |
| .compatible = "brcm,bcm7216-usb-phy", |
| .data = &chip_info_7216, |
| }, |
| { |
| .compatible = "brcm,bcm7211-usb-phy", |
| .data = &chip_info_7211b0, |
| }, |
| { |
| .compatible = "brcm,brcmstb-usb-phy", |
| .data = &chip_info_7445, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| static int brcm_usb_get_regs(struct platform_device *pdev, |
| enum brcmusb_reg_sel regs, |
| struct brcm_usb_init_params *ini, |
| bool optional) |
| { |
| struct resource *res; |
| |
| /* Older DT nodes have ctrl and optional xhci_ec by index only */ |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| node_reg_names[regs]); |
| if (res == NULL) { |
| if (regs == BRCM_REGS_CTRL) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| } else if (regs == BRCM_REGS_XHCI_EC) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| /* XHCI_EC registers are optional */ |
| if (res == NULL) |
| return 0; |
| } |
| if (res == NULL) { |
| if (optional) { |
| dev_dbg(&pdev->dev, |
| "Optional reg %s not found\n", |
| node_reg_names[regs]); |
| return 0; |
| } |
| dev_err(&pdev->dev, "can't get %s base addr\n", |
| node_reg_names[regs]); |
| return 1; |
| } |
| } |
| ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(ini->regs[regs])) { |
| dev_err(&pdev->dev, "can't map %s register space\n", |
| node_reg_names[regs]); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int brcm_usb_phy_dvr_init(struct platform_device *pdev, |
| struct brcm_usb_phy_data *priv, |
| struct device_node *dn) |
| { |
| struct device *dev = &pdev->dev; |
| struct phy *gphy = NULL; |
| int err; |
| |
| priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); |
| if (IS_ERR(priv->usb_20_clk)) { |
| if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_info(dev, "Clock not found in Device Tree\n"); |
| priv->usb_20_clk = NULL; |
| } |
| err = clk_prepare_enable(priv->usb_20_clk); |
| if (err) |
| return err; |
| |
| if (priv->has_eohci) { |
| gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); |
| if (IS_ERR(gphy)) { |
| dev_err(dev, "failed to create EHCI/OHCI PHY\n"); |
| return PTR_ERR(gphy); |
| } |
| priv->phys[BRCM_USB_PHY_2_0].phy = gphy; |
| priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0; |
| phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]); |
| } |
| |
| if (priv->has_xhci) { |
| gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); |
| if (IS_ERR(gphy)) { |
| dev_err(dev, "failed to create XHCI PHY\n"); |
| return PTR_ERR(gphy); |
| } |
| priv->phys[BRCM_USB_PHY_3_0].phy = gphy; |
| priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0; |
| phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]); |
| |
| priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); |
| if (IS_ERR(priv->usb_30_clk)) { |
| if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_info(dev, |
| "USB3.0 clock not found in Device Tree\n"); |
| priv->usb_30_clk = NULL; |
| } |
| err = clk_prepare_enable(priv->usb_30_clk); |
| if (err) |
| return err; |
| } |
| |
| priv->suspend_clk = clk_get(dev, "usb0_freerun"); |
| if (IS_ERR(priv->suspend_clk)) { |
| if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(dev, "Suspend Clock not found in Device Tree\n"); |
| priv->suspend_clk = NULL; |
| } |
| |
| priv->wake_irq = platform_get_irq_byname(pdev, "wake"); |
| if (priv->wake_irq < 0) |
| priv->wake_irq = platform_get_irq_byname(pdev, "wakeup"); |
| if (priv->wake_irq >= 0) { |
| err = devm_request_irq(dev, priv->wake_irq, |
| brcm_usb_phy_wake_isr, 0, |
| dev_name(dev), gphy); |
| if (err < 0) |
| return err; |
| device_set_wakeup_capable(dev, 1); |
| } else { |
| dev_info(dev, |
| "Wake interrupt missing, system wake not supported\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int brcm_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct brcm_usb_phy_data *priv; |
| struct phy_provider *phy_provider; |
| struct device_node *dn = pdev->dev.of_node; |
| int err; |
| const char *mode; |
| const struct of_device_id *match; |
| void (*dvr_init)(struct brcm_usb_init_params *params); |
| const struct match_chip_info *info; |
| struct regmap *rmap; |
| int x; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, priv); |
| |
| priv->ini.family_id = brcmstb_get_family_id(); |
| priv->ini.product_id = brcmstb_get_product_id(); |
| |
| match = of_match_node(brcm_usb_dt_ids, dev->of_node); |
| info = match->data; |
| dvr_init = info->init_func; |
| (*dvr_init)(&priv->ini); |
| |
| dev_dbg(dev, "Best mapping table is for %s\n", |
| priv->ini.family_name); |
| |
| of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); |
| of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); |
| |
| priv->ini.mode = USB_CTLR_MODE_HOST; |
| err = of_property_read_string(dn, "dr_mode", &mode); |
| if (err == 0) { |
| name_to_value(&brcm_dr_mode_to_name[0], |
| ARRAY_SIZE(brcm_dr_mode_to_name), |
| mode, &priv->ini.mode); |
| } |
| if (of_property_read_bool(dn, "brcm,has-xhci")) |
| priv->has_xhci = true; |
| if (of_property_read_bool(dn, "brcm,has-eohci")) |
| priv->has_eohci = true; |
| |
| for (x = 0; x < BRCM_REGS_MAX; x++) { |
| if (info->required_regs[x] >= BRCM_REGS_MAX) |
| break; |
| |
| err = brcm_usb_get_regs(pdev, info->required_regs[x], |
| &priv->ini, false); |
| if (err) |
| return -EINVAL; |
| } |
| if (info->optional_reg) { |
| err = brcm_usb_get_regs(pdev, info->optional_reg, |
| &priv->ini, true); |
| if (err) |
| return -EINVAL; |
| } |
| |
| err = brcm_usb_phy_dvr_init(pdev, priv, dn); |
| if (err) |
| return err; |
| |
| mutex_init(&priv->mutex); |
| |
| /* make sure invert settings are correct */ |
| brcm_usb_init_ipp(&priv->ini); |
| |
| /* |
| * Create sysfs entries for mode. |
| * Remove "dual_select" attribute if not in dual mode |
| */ |
| if (priv->ini.mode != USB_CTLR_MODE_DRD) |
| brcm_usb_phy_attrs[1] = NULL; |
| err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group); |
| if (err) |
| dev_warn(dev, "Error creating sysfs attributes\n"); |
| |
| /* Get piarbctl syscon if it exists */ |
| rmap = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "syscon-piarbctl"); |
| if (IS_ERR(rmap)) |
| rmap = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "brcm,syscon-piarbctl"); |
| if (!IS_ERR(rmap)) |
| priv->ini.syscon_piarbctl = rmap; |
| |
| /* start with everything off */ |
| if (priv->has_xhci) |
| brcm_usb_uninit_xhci(&priv->ini); |
| if (priv->has_eohci) |
| brcm_usb_uninit_eohci(&priv->ini); |
| brcm_usb_uninit_common(&priv->ini); |
| clk_disable_unprepare(priv->usb_20_clk); |
| clk_disable_unprepare(priv->usb_30_clk); |
| |
| phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static int brcm_usb_phy_remove(struct platform_device *pdev) |
| { |
| sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int brcm_usb_phy_suspend(struct device *dev) |
| { |
| struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); |
| |
| if (priv->init_count) { |
| priv->ini.wake_enabled = device_may_wakeup(dev); |
| if (priv->phys[BRCM_USB_PHY_3_0].inited) |
| brcm_usb_uninit_xhci(&priv->ini); |
| if (priv->phys[BRCM_USB_PHY_2_0].inited) |
| brcm_usb_uninit_eohci(&priv->ini); |
| brcm_usb_uninit_common(&priv->ini); |
| |
| /* |
| * Handle the clocks unless needed for wake. This has |
| * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks |
| * and newer XHCI->2.0-clks/3.0-clks. |
| */ |
| |
| if (!priv->ini.suspend_with_clocks) { |
| if (priv->phys[BRCM_USB_PHY_3_0].inited) |
| clk_disable_unprepare(priv->usb_30_clk); |
| if (priv->phys[BRCM_USB_PHY_2_0].inited || |
| !priv->has_eohci) |
| clk_disable_unprepare(priv->usb_20_clk); |
| } |
| if (priv->wake_irq >= 0) |
| enable_irq_wake(priv->wake_irq); |
| } |
| return 0; |
| } |
| |
| static int brcm_usb_phy_resume(struct device *dev) |
| { |
| struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); |
| |
| clk_prepare_enable(priv->usb_20_clk); |
| clk_prepare_enable(priv->usb_30_clk); |
| brcm_usb_init_ipp(&priv->ini); |
| |
| /* |
| * Initialize anything that was previously initialized. |
| * Uninitialize anything that wasn't previously initialized. |
| */ |
| if (priv->init_count) { |
| if (priv->wake_irq >= 0) |
| disable_irq_wake(priv->wake_irq); |
| brcm_usb_init_common(&priv->ini); |
| if (priv->phys[BRCM_USB_PHY_2_0].inited) { |
| brcm_usb_init_eohci(&priv->ini); |
| } else if (priv->has_eohci) { |
| brcm_usb_uninit_eohci(&priv->ini); |
| clk_disable_unprepare(priv->usb_20_clk); |
| } |
| if (priv->phys[BRCM_USB_PHY_3_0].inited) { |
| brcm_usb_init_xhci(&priv->ini); |
| } else if (priv->has_xhci) { |
| brcm_usb_uninit_xhci(&priv->ini); |
| clk_disable_unprepare(priv->usb_30_clk); |
| if (!priv->has_eohci) |
| clk_disable_unprepare(priv->usb_20_clk); |
| } |
| } else { |
| if (priv->has_xhci) |
| brcm_usb_uninit_xhci(&priv->ini); |
| if (priv->has_eohci) |
| brcm_usb_uninit_eohci(&priv->ini); |
| brcm_usb_uninit_common(&priv->ini); |
| clk_disable_unprepare(priv->usb_20_clk); |
| clk_disable_unprepare(priv->usb_30_clk); |
| } |
| priv->ini.wake_enabled = false; |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops brcm_usb_phy_pm_ops = { |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) |
| }; |
| |
| MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); |
| |
| static struct platform_driver brcm_usb_driver = { |
| .probe = brcm_usb_phy_probe, |
| .remove = brcm_usb_phy_remove, |
| .driver = { |
| .name = "brcmstb-usb-phy", |
| .pm = &brcm_usb_phy_pm_ops, |
| .of_match_table = brcm_usb_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(brcm_usb_driver); |
| |
| MODULE_ALIAS("platform:brcmstb-usb-phy"); |
| MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>"); |
| MODULE_DESCRIPTION("BRCM USB PHY driver"); |
| MODULE_LICENSE("GPL v2"); |