| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Core MFD support for Cirrus Logic Madera codecs |
| * |
| * Copyright (C) 2015-2018 Cirrus Logic |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #include <linux/mfd/madera/core.h> |
| #include <linux/mfd/madera/registers.h> |
| |
| #include "madera.h" |
| |
| #define CS47L15_SILICON_ID 0x6370 |
| #define CS47L35_SILICON_ID 0x6360 |
| #define CS47L85_SILICON_ID 0x6338 |
| #define CS47L90_SILICON_ID 0x6364 |
| #define CS47L92_SILICON_ID 0x6371 |
| |
| #define MADERA_32KZ_MCLK2 1 |
| |
| #define MADERA_RESET_MIN_US 2000 |
| #define MADERA_RESET_MAX_US 3000 |
| |
| static const char * const madera_core_supplies[] = { |
| "AVDD", |
| "DBVDD1", |
| }; |
| |
| static const struct mfd_cell madera_ldo1_devs[] = { |
| { .name = "madera-ldo1" }, |
| }; |
| |
| static const char * const cs47l15_supplies[] = { |
| "MICVDD", |
| "CPVDD1", |
| "SPKVDD", |
| }; |
| |
| static const struct mfd_cell cs47l15_devs[] = { |
| { .name = "madera-pinctrl", }, |
| { .name = "madera-irq" }, |
| { .name = "madera-gpio" }, |
| { |
| .name = "madera-extcon", |
| .parent_supplies = cs47l15_supplies, |
| .num_parent_supplies = 1, /* We only need MICVDD */ |
| }, |
| { |
| .name = "cs47l15-codec", |
| .parent_supplies = cs47l15_supplies, |
| .num_parent_supplies = ARRAY_SIZE(cs47l15_supplies), |
| }, |
| }; |
| |
| static const char * const cs47l35_supplies[] = { |
| "MICVDD", |
| "DBVDD2", |
| "CPVDD1", |
| "CPVDD2", |
| "SPKVDD", |
| }; |
| |
| static const struct mfd_cell cs47l35_devs[] = { |
| { .name = "madera-pinctrl", }, |
| { .name = "madera-irq", }, |
| { .name = "madera-micsupp", }, |
| { .name = "madera-gpio", }, |
| { |
| .name = "madera-extcon", |
| .parent_supplies = cs47l35_supplies, |
| .num_parent_supplies = 1, /* We only need MICVDD */ |
| }, |
| { |
| .name = "cs47l35-codec", |
| .parent_supplies = cs47l35_supplies, |
| .num_parent_supplies = ARRAY_SIZE(cs47l35_supplies), |
| }, |
| }; |
| |
| static const char * const cs47l85_supplies[] = { |
| "MICVDD", |
| "DBVDD2", |
| "DBVDD3", |
| "DBVDD4", |
| "CPVDD1", |
| "CPVDD2", |
| "SPKVDDL", |
| "SPKVDDR", |
| }; |
| |
| static const struct mfd_cell cs47l85_devs[] = { |
| { .name = "madera-pinctrl", }, |
| { .name = "madera-irq", }, |
| { .name = "madera-micsupp" }, |
| { .name = "madera-gpio", }, |
| { |
| .name = "madera-extcon", |
| .parent_supplies = cs47l85_supplies, |
| .num_parent_supplies = 1, /* We only need MICVDD */ |
| }, |
| { |
| .name = "cs47l85-codec", |
| .parent_supplies = cs47l85_supplies, |
| .num_parent_supplies = ARRAY_SIZE(cs47l85_supplies), |
| }, |
| }; |
| |
| static const char * const cs47l90_supplies[] = { |
| "MICVDD", |
| "DBVDD2", |
| "DBVDD3", |
| "DBVDD4", |
| "CPVDD1", |
| "CPVDD2", |
| }; |
| |
| static const struct mfd_cell cs47l90_devs[] = { |
| { .name = "madera-pinctrl", }, |
| { .name = "madera-irq", }, |
| { .name = "madera-micsupp", }, |
| { .name = "madera-gpio", }, |
| { |
| .name = "madera-extcon", |
| .parent_supplies = cs47l90_supplies, |
| .num_parent_supplies = 1, /* We only need MICVDD */ |
| }, |
| { |
| .name = "cs47l90-codec", |
| .parent_supplies = cs47l90_supplies, |
| .num_parent_supplies = ARRAY_SIZE(cs47l90_supplies), |
| }, |
| }; |
| |
| static const char * const cs47l92_supplies[] = { |
| "MICVDD", |
| "CPVDD1", |
| "CPVDD2", |
| }; |
| |
| static const struct mfd_cell cs47l92_devs[] = { |
| { .name = "madera-pinctrl" }, |
| { .name = "madera-irq", }, |
| { .name = "madera-micsupp", }, |
| { .name = "madera-gpio" }, |
| { |
| .name = "madera-extcon", |
| .parent_supplies = cs47l92_supplies, |
| .num_parent_supplies = 1, /* We only need MICVDD */ |
| }, |
| { |
| .name = "cs47l92-codec", |
| .parent_supplies = cs47l92_supplies, |
| .num_parent_supplies = ARRAY_SIZE(cs47l92_supplies), |
| }, |
| }; |
| |
| /* Used by madera-i2c and madera-spi drivers */ |
| const char *madera_name_from_type(enum madera_type type) |
| { |
| switch (type) { |
| case CS47L15: |
| return "CS47L15"; |
| case CS47L35: |
| return "CS47L35"; |
| case CS47L85: |
| return "CS47L85"; |
| case CS47L90: |
| return "CS47L90"; |
| case CS47L91: |
| return "CS47L91"; |
| case CS42L92: |
| return "CS42L92"; |
| case CS47L92: |
| return "CS47L92"; |
| case CS47L93: |
| return "CS47L93"; |
| case WM1840: |
| return "WM1840"; |
| default: |
| return "Unknown"; |
| } |
| } |
| EXPORT_SYMBOL_GPL(madera_name_from_type); |
| |
| #define MADERA_BOOT_POLL_INTERVAL_USEC 5000 |
| #define MADERA_BOOT_POLL_TIMEOUT_USEC 25000 |
| |
| static int madera_wait_for_boot_noack(struct madera *madera) |
| { |
| ktime_t timeout; |
| unsigned int val = 0; |
| int ret = 0; |
| |
| /* |
| * We can't use an interrupt as we need to runtime resume to do so, |
| * so we poll the status bit. This won't race with the interrupt |
| * handler because it will be blocked on runtime resume. |
| * The chip could NAK a read request while it is booting so ignore |
| * errors from regmap_read. |
| */ |
| timeout = ktime_add_us(ktime_get(), MADERA_BOOT_POLL_TIMEOUT_USEC); |
| regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val); |
| while (!(val & MADERA_BOOT_DONE_STS1) && |
| !ktime_after(ktime_get(), timeout)) { |
| usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2, |
| MADERA_BOOT_POLL_INTERVAL_USEC); |
| regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val); |
| } |
| |
| if (!(val & MADERA_BOOT_DONE_STS1)) { |
| dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n"); |
| ret = -ETIMEDOUT; |
| } |
| |
| return ret; |
| } |
| |
| static int madera_wait_for_boot(struct madera *madera) |
| { |
| int ret = madera_wait_for_boot_noack(madera); |
| |
| /* |
| * BOOT_DONE defaults to unmasked on boot so we must ack it. |
| * Do this even after a timeout to avoid interrupt storms. |
| */ |
| regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1, |
| MADERA_BOOT_DONE_EINT1); |
| |
| pm_runtime_mark_last_busy(madera->dev); |
| |
| return ret; |
| } |
| |
| static int madera_soft_reset(struct madera *madera) |
| { |
| int ret; |
| |
| ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0); |
| if (ret != 0) { |
| dev_err(madera->dev, "Failed to soft reset device: %d\n", ret); |
| return ret; |
| } |
| |
| /* Allow time for internal clocks to startup after reset */ |
| usleep_range(MADERA_RESET_MIN_US, MADERA_RESET_MAX_US); |
| |
| return 0; |
| } |
| |
| static void madera_enable_hard_reset(struct madera *madera) |
| { |
| /* |
| * There are many existing out-of-tree users of these codecs that we |
| * can't break so preserve the expected behaviour of setting the line |
| * low to assert reset. |
| */ |
| gpiod_set_raw_value_cansleep(madera->pdata.reset, 0); |
| } |
| |
| static void madera_disable_hard_reset(struct madera *madera) |
| { |
| gpiod_set_raw_value_cansleep(madera->pdata.reset, 1); |
| |
| usleep_range(MADERA_RESET_MIN_US, MADERA_RESET_MAX_US); |
| } |
| |
| static int __maybe_unused madera_runtime_resume(struct device *dev) |
| { |
| struct madera *madera = dev_get_drvdata(dev); |
| int ret; |
| |
| dev_dbg(dev, "Leaving sleep mode\n"); |
| |
| ret = regulator_enable(madera->dcvdd); |
| if (ret) { |
| dev_err(dev, "Failed to enable DCVDD: %d\n", ret); |
| return ret; |
| } |
| |
| regcache_cache_only(madera->regmap, false); |
| regcache_cache_only(madera->regmap_32bit, false); |
| |
| usleep_range(MADERA_RESET_MIN_US, MADERA_RESET_MAX_US); |
| |
| ret = madera_wait_for_boot(madera); |
| if (ret) |
| goto err; |
| |
| ret = regcache_sync(madera->regmap); |
| if (ret) { |
| dev_err(dev, "Failed to restore 16-bit register cache\n"); |
| goto err; |
| } |
| |
| ret = regcache_sync(madera->regmap_32bit); |
| if (ret) { |
| dev_err(dev, "Failed to restore 32-bit register cache\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| regcache_cache_only(madera->regmap_32bit, true); |
| regcache_cache_only(madera->regmap, true); |
| regulator_disable(madera->dcvdd); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused madera_runtime_suspend(struct device *dev) |
| { |
| struct madera *madera = dev_get_drvdata(dev); |
| |
| dev_dbg(madera->dev, "Entering sleep mode\n"); |
| |
| regcache_cache_only(madera->regmap, true); |
| regcache_mark_dirty(madera->regmap); |
| regcache_cache_only(madera->regmap_32bit, true); |
| regcache_mark_dirty(madera->regmap_32bit); |
| |
| regulator_disable(madera->dcvdd); |
| |
| return 0; |
| } |
| |
| const struct dev_pm_ops madera_pm_ops = { |
| SET_RUNTIME_PM_OPS(madera_runtime_suspend, |
| madera_runtime_resume, |
| NULL) |
| }; |
| EXPORT_SYMBOL_GPL(madera_pm_ops); |
| |
| const struct of_device_id madera_of_match[] = { |
| { .compatible = "cirrus,cs47l15", .data = (void *)CS47L15 }, |
| { .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 }, |
| { .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 }, |
| { .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 }, |
| { .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 }, |
| { .compatible = "cirrus,cs42l92", .data = (void *)CS42L92 }, |
| { .compatible = "cirrus,cs47l92", .data = (void *)CS47L92 }, |
| { .compatible = "cirrus,cs47l93", .data = (void *)CS47L93 }, |
| { .compatible = "cirrus,wm1840", .data = (void *)WM1840 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, madera_of_match); |
| EXPORT_SYMBOL_GPL(madera_of_match); |
| |
| static int madera_get_reset_gpio(struct madera *madera) |
| { |
| struct gpio_desc *reset; |
| int ret; |
| |
| if (madera->pdata.reset) |
| return 0; |
| |
| reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(reset)) { |
| ret = PTR_ERR(reset); |
| if (ret != -EPROBE_DEFER) |
| dev_err(madera->dev, "Failed to request /RESET: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* |
| * A hard reset is needed for full reset of the chip. We allow running |
| * without hard reset only because it can be useful for early |
| * prototyping and some debugging, but we need to warn it's not ideal. |
| */ |
| if (!reset) |
| dev_warn(madera->dev, |
| "Running without reset GPIO is not recommended\n"); |
| |
| madera->pdata.reset = reset; |
| |
| return 0; |
| } |
| |
| static void madera_set_micbias_info(struct madera *madera) |
| { |
| /* |
| * num_childbias is an array because future codecs can have different |
| * childbiases for each micbias. Unspecified values default to 0. |
| */ |
| switch (madera->type) { |
| case CS47L15: |
| madera->num_micbias = 1; |
| madera->num_childbias[0] = 3; |
| return; |
| case CS47L35: |
| madera->num_micbias = 2; |
| madera->num_childbias[0] = 2; |
| madera->num_childbias[1] = 2; |
| return; |
| case CS47L85: |
| case WM1840: |
| madera->num_micbias = 4; |
| /* no child biases */ |
| return; |
| case CS47L90: |
| case CS47L91: |
| madera->num_micbias = 2; |
| madera->num_childbias[0] = 4; |
| madera->num_childbias[1] = 4; |
| return; |
| case CS42L92: |
| case CS47L92: |
| case CS47L93: |
| madera->num_micbias = 2; |
| madera->num_childbias[0] = 4; |
| madera->num_childbias[1] = 2; |
| return; |
| default: |
| return; |
| } |
| } |
| |
| int madera_dev_init(struct madera *madera) |
| { |
| struct device *dev = madera->dev; |
| unsigned int hwid; |
| int (*patch_fn)(struct madera *) = NULL; |
| const struct mfd_cell *mfd_devs; |
| int n_devs = 0; |
| int i, ret; |
| |
| dev_set_drvdata(madera->dev, madera); |
| BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier); |
| mutex_init(&madera->dapm_ptr_lock); |
| |
| madera_set_micbias_info(madera); |
| |
| /* |
| * We need writable hw config info that all children can share. |
| * Simplest to take one shared copy of pdata struct. |
| */ |
| if (dev_get_platdata(madera->dev)) { |
| memcpy(&madera->pdata, dev_get_platdata(madera->dev), |
| sizeof(madera->pdata)); |
| } |
| |
| madera->mclk[MADERA_MCLK1].id = "mclk1"; |
| madera->mclk[MADERA_MCLK2].id = "mclk2"; |
| madera->mclk[MADERA_MCLK3].id = "mclk3"; |
| |
| ret = devm_clk_bulk_get_optional(madera->dev, ARRAY_SIZE(madera->mclk), |
| madera->mclk); |
| if (ret) { |
| dev_err(madera->dev, "Failed to get clocks: %d\n", ret); |
| return ret; |
| } |
| |
| /* Not using devm_clk_get to prevent breakage of existing DTs */ |
| if (!madera->mclk[MADERA_MCLK2].clk) |
| dev_warn(madera->dev, "Missing MCLK2, requires 32kHz clock\n"); |
| |
| ret = madera_get_reset_gpio(madera); |
| if (ret) |
| return ret; |
| |
| regcache_cache_only(madera->regmap, true); |
| regcache_cache_only(madera->regmap_32bit, true); |
| |
| for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++) |
| madera->core_supplies[i].supply = madera_core_supplies[i]; |
| |
| madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies); |
| |
| /* |
| * On some codecs DCVDD could be supplied by the internal LDO1. |
| * For those we must add the LDO1 driver before requesting DCVDD |
| * No devm_ because we need to control shutdown order of children. |
| */ |
| switch (madera->type) { |
| case CS47L15: |
| case CS47L35: |
| case CS47L90: |
| case CS47L91: |
| case CS42L92: |
| case CS47L92: |
| case CS47L93: |
| break; |
| case CS47L85: |
| case WM1840: |
| ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE, |
| madera_ldo1_devs, |
| ARRAY_SIZE(madera_ldo1_devs), |
| NULL, 0, NULL); |
| if (ret) { |
| dev_err(dev, "Failed to add LDO1 child: %d\n", ret); |
| return ret; |
| } |
| break; |
| default: |
| /* No point continuing if the type is unknown */ |
| dev_err(madera->dev, "Unknown device type %d\n", madera->type); |
| return -ENODEV; |
| } |
| |
| ret = devm_regulator_bulk_get(dev, madera->num_core_supplies, |
| madera->core_supplies); |
| if (ret) { |
| dev_err(dev, "Failed to request core supplies: %d\n", ret); |
| goto err_devs; |
| } |
| |
| /* |
| * Don't use devres here. If the regulator is one of our children it |
| * will already have been removed before devres cleanup on this mfd |
| * driver tries to call put() on it. We need control of shutdown order. |
| */ |
| madera->dcvdd = regulator_get(madera->dev, "DCVDD"); |
| if (IS_ERR(madera->dcvdd)) { |
| ret = PTR_ERR(madera->dcvdd); |
| dev_err(dev, "Failed to request DCVDD: %d\n", ret); |
| goto err_devs; |
| } |
| |
| ret = regulator_bulk_enable(madera->num_core_supplies, |
| madera->core_supplies); |
| if (ret) { |
| dev_err(dev, "Failed to enable core supplies: %d\n", ret); |
| goto err_dcvdd; |
| } |
| |
| ret = regulator_enable(madera->dcvdd); |
| if (ret) { |
| dev_err(dev, "Failed to enable DCVDD: %d\n", ret); |
| goto err_enable; |
| } |
| |
| madera_disable_hard_reset(madera); |
| |
| regcache_cache_only(madera->regmap, false); |
| regcache_cache_only(madera->regmap_32bit, false); |
| |
| ret = madera_wait_for_boot_noack(madera); |
| if (ret) { |
| dev_err(madera->dev, "Device failed initial boot: %d\n", ret); |
| goto err_reset; |
| } |
| |
| /* |
| * Now we can power up and verify that this is a chip we know about |
| * before we start doing any writes to its registers. |
| */ |
| ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid); |
| if (ret) { |
| dev_err(dev, "Failed to read ID register: %d\n", ret); |
| goto err_reset; |
| } |
| |
| switch (hwid) { |
| case CS47L15_SILICON_ID: |
| if (IS_ENABLED(CONFIG_MFD_CS47L15)) { |
| switch (madera->type) { |
| case CS47L15: |
| patch_fn = &cs47l15_patch; |
| mfd_devs = cs47l15_devs; |
| n_devs = ARRAY_SIZE(cs47l15_devs); |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| case CS47L35_SILICON_ID: |
| if (IS_ENABLED(CONFIG_MFD_CS47L35)) { |
| switch (madera->type) { |
| case CS47L35: |
| patch_fn = cs47l35_patch; |
| mfd_devs = cs47l35_devs; |
| n_devs = ARRAY_SIZE(cs47l35_devs); |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| case CS47L85_SILICON_ID: |
| if (IS_ENABLED(CONFIG_MFD_CS47L85)) { |
| switch (madera->type) { |
| case CS47L85: |
| case WM1840: |
| patch_fn = cs47l85_patch; |
| mfd_devs = cs47l85_devs; |
| n_devs = ARRAY_SIZE(cs47l85_devs); |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| case CS47L90_SILICON_ID: |
| if (IS_ENABLED(CONFIG_MFD_CS47L90)) { |
| switch (madera->type) { |
| case CS47L90: |
| case CS47L91: |
| patch_fn = cs47l90_patch; |
| mfd_devs = cs47l90_devs; |
| n_devs = ARRAY_SIZE(cs47l90_devs); |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| case CS47L92_SILICON_ID: |
| if (IS_ENABLED(CONFIG_MFD_CS47L92)) { |
| switch (madera->type) { |
| case CS42L92: |
| case CS47L92: |
| case CS47L93: |
| patch_fn = cs47l92_patch; |
| mfd_devs = cs47l92_devs; |
| n_devs = ARRAY_SIZE(cs47l92_devs); |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| default: |
| dev_err(madera->dev, "Unknown device ID: %x\n", hwid); |
| ret = -EINVAL; |
| goto err_reset; |
| } |
| |
| if (!n_devs) { |
| dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, |
| madera->type_name); |
| ret = -ENODEV; |
| goto err_reset; |
| } |
| |
| /* |
| * It looks like a device we support. If we don't have a hard reset |
| * we can now attempt a soft reset. |
| */ |
| if (!madera->pdata.reset) { |
| ret = madera_soft_reset(madera); |
| if (ret) |
| goto err_reset; |
| } |
| |
| ret = madera_wait_for_boot(madera); |
| if (ret) { |
| dev_err(madera->dev, "Failed to clear boot done: %d\n", ret); |
| goto err_reset; |
| } |
| |
| ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION, |
| &madera->rev); |
| if (ret) { |
| dev_err(dev, "Failed to read revision register: %d\n", ret); |
| goto err_reset; |
| } |
| madera->rev &= MADERA_HW_REVISION_MASK; |
| |
| dev_info(dev, "%s silicon revision %d\n", madera->type_name, |
| madera->rev); |
| |
| /* Apply hardware patch */ |
| if (patch_fn) { |
| ret = patch_fn(madera); |
| if (ret) { |
| dev_err(madera->dev, "Failed to apply patch %d\n", ret); |
| goto err_reset; |
| } |
| } |
| |
| /* Init 32k clock sourced from MCLK2 */ |
| ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2].clk); |
| if (ret) { |
| dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret); |
| goto err_reset; |
| } |
| |
| ret = regmap_update_bits(madera->regmap, |
| MADERA_CLOCK_32K_1, |
| MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK, |
| MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2); |
| if (ret) { |
| dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret); |
| goto err_clock; |
| } |
| |
| pm_runtime_set_active(madera->dev); |
| pm_runtime_enable(madera->dev); |
| pm_runtime_set_autosuspend_delay(madera->dev, 100); |
| pm_runtime_use_autosuspend(madera->dev); |
| |
| /* No devm_ because we need to control shutdown order of children */ |
| ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE, |
| mfd_devs, n_devs, |
| NULL, 0, NULL); |
| if (ret) { |
| dev_err(madera->dev, "Failed to add subdevices: %d\n", ret); |
| goto err_pm_runtime; |
| } |
| |
| return 0; |
| |
| err_pm_runtime: |
| pm_runtime_disable(madera->dev); |
| err_clock: |
| clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); |
| err_reset: |
| madera_enable_hard_reset(madera); |
| regulator_disable(madera->dcvdd); |
| err_enable: |
| regulator_bulk_disable(madera->num_core_supplies, |
| madera->core_supplies); |
| err_dcvdd: |
| regulator_put(madera->dcvdd); |
| err_devs: |
| mfd_remove_devices(dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(madera_dev_init); |
| |
| int madera_dev_exit(struct madera *madera) |
| { |
| /* Prevent any IRQs being serviced while we clean up */ |
| disable_irq(madera->irq); |
| |
| /* |
| * DCVDD could be supplied by a child node, we must disable it before |
| * removing the children, and prevent PM runtime from turning it back on |
| */ |
| pm_runtime_disable(madera->dev); |
| |
| clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); |
| |
| regulator_disable(madera->dcvdd); |
| regulator_put(madera->dcvdd); |
| |
| mfd_remove_devices(madera->dev); |
| madera_enable_hard_reset(madera); |
| |
| regulator_bulk_disable(madera->num_core_supplies, |
| madera->core_supplies); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(madera_dev_exit); |
| |
| MODULE_DESCRIPTION("Madera core MFD driver"); |
| MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); |
| MODULE_LICENSE("GPL v2"); |