| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * macfb.c: Generic framebuffer for Macs whose colourmaps/modes we |
| * don't know how to set. |
| * |
| * (c) 1999 David Huggins-Daines <dhd@debian.org> |
| * |
| * Primarily based on vesafb.c, by Gerd Knorr |
| * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de> |
| * |
| * Also uses information and code from: |
| * |
| * The original macfb.c from Linux/mac68k 2.0, by Alan Cox, Juergen |
| * Mellinger, Mikael Forselius, Michael Schmitz, and others. |
| * |
| * valkyriefb.c, by Martin Costabel, Kevin Schoedel, Barry Nathan, Dan |
| * Jacobowitz, Paul Mackerras, Fabio Riccardi, and Geert Uytterhoeven. |
| * |
| * The VideoToolbox "Bugs" web page at |
| * http://rajsky.psych.nyu.edu/Tips/VideoBugs.html |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/nubus.h> |
| #include <linux/init.h> |
| #include <linux/fb.h> |
| |
| #include <asm/setup.h> |
| #include <asm/macintosh.h> |
| #include <asm/io.h> |
| |
| /* Common DAC base address for the LC, RBV, Valkyrie, and IIvx */ |
| #define DAC_BASE 0x50f24000 |
| |
| /* Some addresses for the DAFB */ |
| #define DAFB_BASE 0xf9800200 |
| |
| /* Address for the built-in Civic framebuffer in Quadra AVs */ |
| #define CIVIC_BASE 0x50f30800 |
| |
| /* GSC (Gray Scale Controller) base address */ |
| #define GSC_BASE 0x50F20000 |
| |
| /* CSC (Color Screen Controller) base address */ |
| #define CSC_BASE 0x50F20000 |
| |
| static int (*macfb_setpalette)(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info); |
| |
| static struct { |
| unsigned char addr; |
| unsigned char lut; |
| } __iomem *v8_brazil_cmap_regs; |
| |
| static struct { |
| unsigned char addr; |
| char pad1[3]; /* word aligned */ |
| unsigned char lut; |
| char pad2[3]; /* word aligned */ |
| unsigned char cntl; /* a guess as to purpose */ |
| } __iomem *rbv_cmap_regs; |
| |
| static struct { |
| unsigned long reset; |
| unsigned long pad1[3]; |
| unsigned char pad2[3]; |
| unsigned char lut; |
| } __iomem *dafb_cmap_regs; |
| |
| static struct { |
| unsigned char addr; /* OFFSET: 0x00 */ |
| unsigned char pad1[15]; |
| unsigned char lut; /* OFFSET: 0x10 */ |
| unsigned char pad2[15]; |
| unsigned char status; /* OFFSET: 0x20 */ |
| unsigned char pad3[7]; |
| unsigned long vbl_addr; /* OFFSET: 0x28 */ |
| unsigned int status2; /* OFFSET: 0x2C */ |
| } __iomem *civic_cmap_regs; |
| |
| static struct { |
| char pad1[0x40]; |
| unsigned char clut_waddr; /* 0x40 */ |
| char pad2; |
| unsigned char clut_data; /* 0x42 */ |
| char pad3[0x3]; |
| unsigned char clut_raddr; /* 0x46 */ |
| } __iomem *csc_cmap_regs; |
| |
| /* The registers in these structs are in NuBus slot space */ |
| struct mdc_cmap_regs { |
| char pad1[0x200200]; |
| unsigned char addr; |
| char pad2[6]; |
| unsigned char lut; |
| }; |
| |
| struct toby_cmap_regs { |
| char pad1[0x90018]; |
| unsigned char lut; /* TFBClutWDataReg, offset 0x90018 */ |
| char pad2[3]; |
| unsigned char addr; /* TFBClutAddrReg, offset 0x9001C */ |
| }; |
| |
| struct jet_cmap_regs { |
| char pad1[0xe0e000]; |
| unsigned char addr; |
| unsigned char lut; |
| }; |
| |
| #define PIXEL_TO_MM(a) (((a)*10)/28) /* width in mm at 72 dpi */ |
| |
| static struct fb_var_screeninfo macfb_defined = { |
| .activate = FB_ACTIVATE_NOW, |
| .right_margin = 32, |
| .upper_margin = 16, |
| .lower_margin = 4, |
| .vsync_len = 4, |
| .vmode = FB_VMODE_NONINTERLACED, |
| }; |
| |
| static struct fb_fix_screeninfo macfb_fix = { |
| .type = FB_TYPE_PACKED_PIXELS, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static void *slot_addr; |
| static struct fb_info fb_info; |
| static u32 pseudo_palette[16]; |
| static int vidtest; |
| |
| /* |
| * Unlike the Valkyrie, the DAFB cannot set individual colormap |
| * registers. Therefore, we do what the MacOS driver does (no |
| * kidding!) and simply set them one by one until we hit the one we |
| * want. |
| */ |
| static int dafb_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| static int lastreg = -2; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* |
| * fbdev will set an entire colourmap, but X won't. Hopefully |
| * this should accommodate both of them |
| */ |
| if (regno != lastreg + 1) { |
| int i; |
| |
| /* Stab in the dark trying to reset the CLUT pointer */ |
| nubus_writel(0, &dafb_cmap_regs->reset); |
| nop(); |
| |
| /* Loop until we get to the register we want */ |
| for (i = 0; i < regno; i++) { |
| nubus_writeb(info->cmap.red[i] >> 8, |
| &dafb_cmap_regs->lut); |
| nop(); |
| nubus_writeb(info->cmap.green[i] >> 8, |
| &dafb_cmap_regs->lut); |
| nop(); |
| nubus_writeb(info->cmap.blue[i] >> 8, |
| &dafb_cmap_regs->lut); |
| nop(); |
| } |
| } |
| |
| nubus_writeb(red, &dafb_cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &dafb_cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &dafb_cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| lastreg = regno; |
| return 0; |
| } |
| |
| /* V8 and Brazil seem to use the same DAC. Sonora does as well. */ |
| static int v8_brazil_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| unsigned int bpp = info->var.bits_per_pixel; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* On these chips, the CLUT register numbers are spread out |
| * across the register space. Thus: |
| * In 8bpp, all regnos are valid. |
| * In 4bpp, the regnos are 0x0f, 0x1f, 0x2f, etc, etc |
| * In 2bpp, the regnos are 0x3f, 0x7f, 0xbf, 0xff |
| */ |
| regno = (regno << (8 - bpp)) | (0xFF >> bpp); |
| nubus_writeb(regno, &v8_brazil_cmap_regs->addr); |
| nop(); |
| |
| /* send one color channel at a time */ |
| nubus_writeb(red, &v8_brazil_cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &v8_brazil_cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &v8_brazil_cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* RAM-Based Video */ |
| static int rbv_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* From the VideoToolbox driver. Seems to be saying that |
| * regno #254 and #255 are the important ones for 1-bit color, |
| * regno #252-255 are the important ones for 2-bit color, etc. |
| */ |
| regno += 256 - (1 << info->var.bits_per_pixel); |
| |
| /* reset clut? (VideoToolbox sez "not necessary") */ |
| nubus_writeb(0xFF, &rbv_cmap_regs->cntl); |
| nop(); |
| |
| /* tell clut which address to use. */ |
| nubus_writeb(regno, &rbv_cmap_regs->addr); |
| nop(); |
| |
| /* send one color channel at a time. */ |
| nubus_writeb(red, &rbv_cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &rbv_cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &rbv_cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* Macintosh Display Card (8*24) */ |
| static int mdc_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| struct mdc_cmap_regs *cmap_regs = slot_addr; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* the nop's are there to order writes. */ |
| nubus_writeb(regno, &cmap_regs->addr); |
| nop(); |
| nubus_writeb(red, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* Toby frame buffer */ |
| static int toby_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| struct toby_cmap_regs *cmap_regs = slot_addr; |
| unsigned int bpp = info->var.bits_per_pixel; |
| unsigned long flags; |
| |
| red = ~red; |
| green = ~green; |
| blue = ~blue; |
| regno = (regno << (8 - bpp)) | (0xFF >> bpp); |
| |
| local_irq_save(flags); |
| |
| nubus_writeb(regno, &cmap_regs->addr); |
| nop(); |
| nubus_writeb(red, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* Jet frame buffer */ |
| static int jet_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| struct jet_cmap_regs *cmap_regs = slot_addr; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| nubus_writeb(regno, &cmap_regs->addr); |
| nop(); |
| nubus_writeb(red, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &cmap_regs->lut); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* |
| * Civic framebuffer -- Quadra AV built-in video. A chip |
| * called Sebastian holds the actual color palettes, and |
| * apparently, there are two different banks of 512K RAM |
| * which can act as separate framebuffers for doing video |
| * input and viewing the screen at the same time! The 840AV |
| * Can add another 1MB RAM to give the two framebuffers |
| * 1MB RAM apiece. |
| */ |
| static int civic_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| unsigned long flags; |
| int clut_status; |
| |
| local_irq_save(flags); |
| |
| /* Set the register address */ |
| nubus_writeb(regno, &civic_cmap_regs->addr); |
| nop(); |
| |
| /* |
| * Grab a status word and do some checking; |
| * Then finally write the clut! |
| */ |
| clut_status = nubus_readb(&civic_cmap_regs->status2); |
| |
| if ((clut_status & 0x0008) == 0) |
| { |
| #if 0 |
| if ((clut_status & 0x000D) != 0) |
| { |
| nubus_writeb(0x00, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(0x00, &civic_cmap_regs->lut); |
| nop(); |
| } |
| #endif |
| |
| nubus_writeb(red, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(0x00, &civic_cmap_regs->lut); |
| } |
| else |
| { |
| unsigned char junk; |
| |
| junk = nubus_readb(&civic_cmap_regs->lut); |
| nop(); |
| junk = nubus_readb(&civic_cmap_regs->lut); |
| nop(); |
| junk = nubus_readb(&civic_cmap_regs->lut); |
| nop(); |
| junk = nubus_readb(&civic_cmap_regs->lut); |
| nop(); |
| |
| if ((clut_status & 0x000D) != 0) |
| { |
| nubus_writeb(0x00, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(0x00, &civic_cmap_regs->lut); |
| nop(); |
| } |
| |
| nubus_writeb(red, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(green, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(blue, &civic_cmap_regs->lut); |
| nop(); |
| nubus_writeb(junk, &civic_cmap_regs->lut); |
| } |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| /* |
| * The CSC is the framebuffer on the PowerBook 190 series |
| * (and the 5300 too, but that's a PowerMac). This function |
| * brought to you in part by the ECSC driver for MkLinux. |
| */ |
| static int csc_setpalette(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| struct fb_info *info) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| udelay(1); /* mklinux on PB 5300 waits for 260 ns */ |
| nubus_writeb(regno, &csc_cmap_regs->clut_waddr); |
| nubus_writeb(red, &csc_cmap_regs->clut_data); |
| nubus_writeb(green, &csc_cmap_regs->clut_data); |
| nubus_writeb(blue, &csc_cmap_regs->clut_data); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| static int macfb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *fb_info) |
| { |
| /* |
| * Set a single color register. The values supplied are |
| * already rounded down to the hardware's capabilities |
| * (according to the entries in the `var' structure). |
| * Return non-zero for invalid regno. |
| */ |
| |
| if (regno >= fb_info->cmap.len) |
| return 1; |
| |
| if (fb_info->var.bits_per_pixel <= 8) { |
| switch (fb_info->var.bits_per_pixel) { |
| case 1: |
| /* We shouldn't get here */ |
| break; |
| case 2: |
| case 4: |
| case 8: |
| if (macfb_setpalette) |
| macfb_setpalette(regno, red >> 8, green >> 8, |
| blue >> 8, fb_info); |
| else |
| return 1; |
| break; |
| } |
| } else if (regno < 16) { |
| switch (fb_info->var.bits_per_pixel) { |
| case 16: |
| if (fb_info->var.red.offset == 10) { |
| /* 1:5:5:5 */ |
| ((u32*) (fb_info->pseudo_palette))[regno] = |
| ((red & 0xf800) >> 1) | |
| ((green & 0xf800) >> 6) | |
| ((blue & 0xf800) >> 11) | |
| ((transp != 0) << 15); |
| } else { |
| /* 0:5:6:5 */ |
| ((u32*) (fb_info->pseudo_palette))[regno] = |
| ((red & 0xf800) >> 0) | |
| ((green & 0xfc00) >> 5) | |
| ((blue & 0xf800) >> 11); |
| } |
| break; |
| /* |
| * 24-bit colour almost doesn't exist on 68k Macs -- |
| * http://support.apple.com/kb/TA28634 (Old Article: 10992) |
| */ |
| case 24: |
| case 32: |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| ((u32 *)(fb_info->pseudo_palette))[regno] = |
| (red << fb_info->var.red.offset) | |
| (green << fb_info->var.green.offset) | |
| (blue << fb_info->var.blue.offset); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct fb_ops macfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_setcolreg = macfb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| static void __init macfb_setup(char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return; |
| |
| while ((this_opt = strsep(&options, ",")) != NULL) { |
| if (!*this_opt) |
| continue; |
| |
| if (!strcmp(this_opt, "inverse")) |
| fb_invert_cmaps(); |
| else |
| if (!strcmp(this_opt, "vidtest")) |
| vidtest = 1; /* enable experimental CLUT code */ |
| } |
| } |
| |
| static void __init iounmap_macfb(void) |
| { |
| if (dafb_cmap_regs) |
| iounmap(dafb_cmap_regs); |
| if (v8_brazil_cmap_regs) |
| iounmap(v8_brazil_cmap_regs); |
| if (rbv_cmap_regs) |
| iounmap(rbv_cmap_regs); |
| if (civic_cmap_regs) |
| iounmap(civic_cmap_regs); |
| if (csc_cmap_regs) |
| iounmap(csc_cmap_regs); |
| } |
| |
| static int __init macfb_init(void) |
| { |
| int video_cmap_len, video_is_nubus = 0; |
| struct nubus_rsrc *ndev = NULL; |
| char *option = NULL; |
| int err; |
| |
| if (fb_get_options("macfb", &option)) |
| return -ENODEV; |
| macfb_setup(option); |
| |
| if (!MACH_IS_MAC) |
| return -ENODEV; |
| |
| if (mac_bi_data.id == MAC_MODEL_Q630 || |
| mac_bi_data.id == MAC_MODEL_P588) |
| return -ENODEV; /* See valkyriefb.c */ |
| |
| macfb_defined.xres = mac_bi_data.dimensions & 0xFFFF; |
| macfb_defined.yres = mac_bi_data.dimensions >> 16; |
| macfb_defined.bits_per_pixel = mac_bi_data.videodepth; |
| |
| macfb_fix.line_length = mac_bi_data.videorow; |
| macfb_fix.smem_len = macfb_fix.line_length * macfb_defined.yres; |
| /* Note: physical address (since 2.1.127) */ |
| macfb_fix.smem_start = mac_bi_data.videoaddr; |
| |
| /* |
| * This is actually redundant with the initial mappings. |
| * However, there are some non-obvious aspects to the way |
| * those mappings are set up, so this is in fact the safest |
| * way to ensure that this driver will work on every possible Mac |
| */ |
| fb_info.screen_base = ioremap(mac_bi_data.videoaddr, |
| macfb_fix.smem_len); |
| if (!fb_info.screen_base) |
| return -ENODEV; |
| |
| pr_info("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n", |
| macfb_fix.smem_start, fb_info.screen_base, |
| macfb_fix.smem_len / 1024); |
| pr_info("macfb: mode is %dx%dx%d, linelength=%d\n", |
| macfb_defined.xres, macfb_defined.yres, |
| macfb_defined.bits_per_pixel, macfb_fix.line_length); |
| |
| /* Fill in the available video resolution */ |
| macfb_defined.xres_virtual = macfb_defined.xres; |
| macfb_defined.yres_virtual = macfb_defined.yres; |
| macfb_defined.height = PIXEL_TO_MM(macfb_defined.yres); |
| macfb_defined.width = PIXEL_TO_MM(macfb_defined.xres); |
| |
| /* Some dummy values for timing to make fbset happy */ |
| macfb_defined.pixclock = 10000000 / macfb_defined.xres * |
| 1000 / macfb_defined.yres; |
| macfb_defined.left_margin = (macfb_defined.xres / 8) & 0xf8; |
| macfb_defined.hsync_len = (macfb_defined.xres / 8) & 0xf8; |
| |
| switch (macfb_defined.bits_per_pixel) { |
| case 1: |
| macfb_defined.red.length = macfb_defined.bits_per_pixel; |
| macfb_defined.green.length = macfb_defined.bits_per_pixel; |
| macfb_defined.blue.length = macfb_defined.bits_per_pixel; |
| video_cmap_len = 2; |
| macfb_fix.visual = FB_VISUAL_MONO01; |
| break; |
| case 2: |
| case 4: |
| case 8: |
| macfb_defined.red.length = macfb_defined.bits_per_pixel; |
| macfb_defined.green.length = macfb_defined.bits_per_pixel; |
| macfb_defined.blue.length = macfb_defined.bits_per_pixel; |
| video_cmap_len = 1 << macfb_defined.bits_per_pixel; |
| macfb_fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| break; |
| case 16: |
| macfb_defined.transp.offset = 15; |
| macfb_defined.transp.length = 1; |
| macfb_defined.red.offset = 10; |
| macfb_defined.red.length = 5; |
| macfb_defined.green.offset = 5; |
| macfb_defined.green.length = 5; |
| macfb_defined.blue.offset = 0; |
| macfb_defined.blue.length = 5; |
| video_cmap_len = 16; |
| /* |
| * Should actually be FB_VISUAL_DIRECTCOLOR, but this |
| * works too |
| */ |
| macfb_fix.visual = FB_VISUAL_TRUECOLOR; |
| break; |
| case 24: |
| case 32: |
| macfb_defined.red.offset = 16; |
| macfb_defined.red.length = 8; |
| macfb_defined.green.offset = 8; |
| macfb_defined.green.length = 8; |
| macfb_defined.blue.offset = 0; |
| macfb_defined.blue.length = 8; |
| video_cmap_len = 16; |
| macfb_fix.visual = FB_VISUAL_TRUECOLOR; |
| break; |
| default: |
| pr_err("macfb: unknown or unsupported bit depth: %d\n", |
| macfb_defined.bits_per_pixel); |
| err = -EINVAL; |
| goto fail_unmap; |
| } |
| |
| /* |
| * We take a wild guess that if the video physical address is |
| * in nubus slot space, that the nubus card is driving video. |
| * Penguin really ought to tell us whether we are using internal |
| * video or not. |
| * Hopefully we only find one of them. Otherwise our NuBus |
| * code is really broken :-) |
| */ |
| |
| for_each_func_rsrc(ndev) { |
| unsigned long base = ndev->board->slot_addr; |
| |
| if (mac_bi_data.videoaddr < base || |
| mac_bi_data.videoaddr - base > 0xFFFFFF) |
| continue; |
| |
| if (ndev->category != NUBUS_CAT_DISPLAY || |
| ndev->type != NUBUS_TYPE_VIDEO) |
| continue; |
| |
| video_is_nubus = 1; |
| slot_addr = (unsigned char *)base; |
| |
| switch(ndev->dr_hw) { |
| case NUBUS_DRHW_APPLE_MDC: |
| strcpy(macfb_fix.id, "Mac Disp. Card"); |
| macfb_setpalette = mdc_setpalette; |
| break; |
| case NUBUS_DRHW_APPLE_TFB: |
| strcpy(macfb_fix.id, "Toby"); |
| macfb_setpalette = toby_setpalette; |
| break; |
| case NUBUS_DRHW_APPLE_JET: |
| strcpy(macfb_fix.id, "Jet"); |
| macfb_setpalette = jet_setpalette; |
| break; |
| default: |
| strcpy(macfb_fix.id, "Generic NuBus"); |
| break; |
| } |
| } |
| |
| /* If it's not a NuBus card, it must be internal video */ |
| if (!video_is_nubus) |
| switch (mac_bi_data.id) { |
| /* |
| * DAFB Quadras |
| * Note: these first four have the v7 DAFB, which is |
| * known to be rather unlike the ones used in the |
| * other models |
| */ |
| case MAC_MODEL_P475: |
| case MAC_MODEL_P475F: |
| case MAC_MODEL_P575: |
| case MAC_MODEL_Q605: |
| |
| case MAC_MODEL_Q800: |
| case MAC_MODEL_Q650: |
| case MAC_MODEL_Q610: |
| case MAC_MODEL_C650: |
| case MAC_MODEL_C610: |
| case MAC_MODEL_Q700: |
| case MAC_MODEL_Q900: |
| case MAC_MODEL_Q950: |
| strcpy(macfb_fix.id, "DAFB"); |
| macfb_setpalette = dafb_setpalette; |
| dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); |
| break; |
| |
| /* |
| * LC II uses the V8 framebuffer |
| */ |
| case MAC_MODEL_LCII: |
| strcpy(macfb_fix.id, "V8"); |
| macfb_setpalette = v8_brazil_setpalette; |
| v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
| break; |
| |
| /* |
| * IIvi, IIvx use the "Brazil" framebuffer (which is |
| * very much like the V8, it seems, and probably uses |
| * the same DAC) |
| */ |
| case MAC_MODEL_IIVI: |
| case MAC_MODEL_IIVX: |
| case MAC_MODEL_P600: |
| strcpy(macfb_fix.id, "Brazil"); |
| macfb_setpalette = v8_brazil_setpalette; |
| v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
| break; |
| |
| /* |
| * LC III (and friends) use the Sonora framebuffer |
| * Incidentally this is also used in the non-AV models |
| * of the x100 PowerMacs |
| * These do in fact seem to use the same DAC interface |
| * as the LC II. |
| */ |
| case MAC_MODEL_LCIII: |
| case MAC_MODEL_P520: |
| case MAC_MODEL_P550: |
| case MAC_MODEL_P460: |
| strcpy(macfb_fix.id, "Sonora"); |
| macfb_setpalette = v8_brazil_setpalette; |
| v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
| break; |
| |
| /* |
| * IIci and IIsi use the infamous RBV chip |
| * (the IIsi is just a rebadged and crippled |
| * IIci in a different case, BTW) |
| */ |
| case MAC_MODEL_IICI: |
| case MAC_MODEL_IISI: |
| strcpy(macfb_fix.id, "RBV"); |
| macfb_setpalette = rbv_setpalette; |
| rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); |
| break; |
| |
| /* |
| * AVs use the Civic framebuffer |
| */ |
| case MAC_MODEL_Q840: |
| case MAC_MODEL_C660: |
| strcpy(macfb_fix.id, "Civic"); |
| macfb_setpalette = civic_setpalette; |
| civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); |
| break; |
| |
| |
| /* |
| * Assorted weirdos |
| * We think this may be like the LC II |
| */ |
| case MAC_MODEL_LC: |
| strcpy(macfb_fix.id, "LC"); |
| if (vidtest) { |
| macfb_setpalette = v8_brazil_setpalette; |
| v8_brazil_cmap_regs = |
| ioremap(DAC_BASE, 0x1000); |
| } |
| break; |
| |
| /* |
| * We think this may be like the LC II |
| */ |
| case MAC_MODEL_CCL: |
| strcpy(macfb_fix.id, "Color Classic"); |
| if (vidtest) { |
| macfb_setpalette = v8_brazil_setpalette; |
| v8_brazil_cmap_regs = |
| ioremap(DAC_BASE, 0x1000); |
| } |
| break; |
| |
| /* |
| * And we *do* mean "weirdos" |
| */ |
| case MAC_MODEL_TV: |
| strcpy(macfb_fix.id, "Mac TV"); |
| break; |
| |
| /* |
| * These don't have colour, so no need to worry |
| */ |
| case MAC_MODEL_SE30: |
| case MAC_MODEL_CLII: |
| strcpy(macfb_fix.id, "Monochrome"); |
| break; |
| |
| /* |
| * Powerbooks are particularly difficult. Many of |
| * them have separate framebuffers for external and |
| * internal video, which is admittedly pretty cool, |
| * but will be a bit of a headache to support here. |
| * Also, many of them are grayscale, and we don't |
| * really support that. |
| */ |
| |
| /* |
| * Slot 0 ROM says TIM. No external video. B&W. |
| */ |
| case MAC_MODEL_PB140: |
| case MAC_MODEL_PB145: |
| case MAC_MODEL_PB170: |
| strcpy(macfb_fix.id, "DDC"); |
| break; |
| |
| /* |
| * Internal is GSC, External (if present) is ViSC |
| */ |
| case MAC_MODEL_PB150: /* no external video */ |
| case MAC_MODEL_PB160: |
| case MAC_MODEL_PB165: |
| case MAC_MODEL_PB180: |
| case MAC_MODEL_PB210: |
| case MAC_MODEL_PB230: |
| strcpy(macfb_fix.id, "GSC"); |
| break; |
| |
| /* |
| * Internal is TIM, External is ViSC |
| */ |
| case MAC_MODEL_PB165C: |
| case MAC_MODEL_PB180C: |
| strcpy(macfb_fix.id, "TIM"); |
| break; |
| |
| /* |
| * Internal is CSC, External is Keystone+Ariel. |
| */ |
| case MAC_MODEL_PB190: /* external video is optional */ |
| case MAC_MODEL_PB520: |
| case MAC_MODEL_PB250: |
| case MAC_MODEL_PB270C: |
| case MAC_MODEL_PB280: |
| case MAC_MODEL_PB280C: |
| strcpy(macfb_fix.id, "CSC"); |
| macfb_setpalette = csc_setpalette; |
| csc_cmap_regs = ioremap(CSC_BASE, 0x1000); |
| break; |
| |
| default: |
| strcpy(macfb_fix.id, "Unknown"); |
| break; |
| } |
| |
| fb_info.fbops = &macfb_ops; |
| fb_info.var = macfb_defined; |
| fb_info.fix = macfb_fix; |
| fb_info.pseudo_palette = pseudo_palette; |
| fb_info.flags = FBINFO_DEFAULT; |
| |
| err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); |
| if (err) |
| goto fail_unmap; |
| |
| err = register_framebuffer(&fb_info); |
| if (err) |
| goto fail_dealloc; |
| |
| fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id); |
| |
| return 0; |
| |
| fail_dealloc: |
| fb_dealloc_cmap(&fb_info.cmap); |
| fail_unmap: |
| iounmap(fb_info.screen_base); |
| iounmap_macfb(); |
| return err; |
| } |
| |
| module_init(macfb_init); |
| MODULE_LICENSE("GPL"); |