| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Parade TrueTouch(TM) Standard Product V5 Module. |
| * |
| * Copyright (C) 2015 Parade Technologies |
| * Copyright (C) 2012-2015 Cypress Semiconductor |
| * Copyright (C) 2018 Bootlin |
| * |
| * Authors: Mylène Josserand <mylene.josserand@bootlin.com> |
| * Alistair Francis <alistair@alistair23.me> |
| */ |
| |
| #include <linux/crc-itu-t.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/input/mt.h> |
| #include <linux/input/touchscreen.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <asm/unaligned.h> |
| |
| #define CYTTSP5_NAME "cyttsp5" |
| #define CY_I2C_DATA_SIZE (2 * 256) |
| #define HID_VERSION 0x0100 |
| #define CY_MAX_INPUT 512 |
| #define CYTTSP5_PREALLOCATED_CMD_BUFFER 32 |
| #define CY_BITS_PER_BTN 1 |
| #define CY_NUM_BTN_EVENT_ID GENMASK(CY_BITS_PER_BTN, 0) |
| |
| #define MAX_AREA 255 |
| #define HID_OUTPUT_BL_SOP 0x1 |
| #define HID_OUTPUT_BL_EOP 0x17 |
| #define HID_OUTPUT_BL_LAUNCH_APP 0x3B |
| #define HID_OUTPUT_BL_LAUNCH_APP_SIZE 11 |
| #define HID_OUTPUT_GET_SYSINFO 0x2 |
| #define HID_OUTPUT_GET_SYSINFO_SIZE 5 |
| #define HID_OUTPUT_MAX_CMD_SIZE 12 |
| |
| #define HID_DESC_REG 0x1 |
| #define HID_INPUT_REG 0x3 |
| #define HID_OUTPUT_REG 0x4 |
| |
| #define REPORT_ID_TOUCH 0x1 |
| #define REPORT_ID_BTN 0x3 |
| #define REPORT_SIZE_5 5 |
| #define REPORT_SIZE_8 8 |
| #define REPORT_SIZE_16 16 |
| |
| /* Touch reports offsets */ |
| /* Header offsets */ |
| #define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT 16 |
| /* Record offsets */ |
| #define TOUCH_REPORT_DESC_CONTACTID 8 |
| #define TOUCH_REPORT_DESC_X 16 |
| #define TOUCH_REPORT_DESC_Y 32 |
| #define TOUCH_REPORT_DESC_P 48 |
| #define TOUCH_REPORT_DESC_MAJ 56 |
| #define TOUCH_REPORT_DESC_MIN 64 |
| |
| /* HID */ |
| #define HID_TOUCH_REPORT_ID 0x1 |
| #define HID_BTN_REPORT_ID 0x3 |
| #define HID_APP_RESPONSE_REPORT_ID 0x1F |
| #define HID_APP_OUTPUT_REPORT_ID 0x2F |
| #define HID_BL_RESPONSE_REPORT_ID 0x30 |
| #define HID_BL_OUTPUT_REPORT_ID 0x40 |
| |
| #define HID_OUTPUT_RESPONSE_REPORT_OFFSET 2 |
| #define HID_OUTPUT_RESPONSE_CMD_OFFSET 4 |
| #define HID_OUTPUT_RESPONSE_CMD_MASK GENMASK(6, 0) |
| |
| #define HID_SYSINFO_SENSING_OFFSET 33 |
| #define HID_SYSINFO_BTN_OFFSET 48 |
| #define HID_SYSINFO_BTN_MASK GENMASK(7, 0) |
| #define HID_SYSINFO_MAX_BTN 8 |
| |
| #define CY_HID_OUTPUT_TIMEOUT_MS 200 |
| #define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS 3000 |
| #define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS 4000 |
| |
| /* maximum number of concurrent tracks */ |
| #define TOUCH_REPORT_SIZE 10 |
| #define TOUCH_INPUT_HEADER_SIZE 7 |
| #define BTN_REPORT_SIZE 9 |
| #define BTN_INPUT_HEADER_SIZE 5 |
| |
| #define MAX_CY_TCH_T_IDS 32 |
| |
| /* All usage pages for Touch Report */ |
| #define TOUCH_REPORT_USAGE_PG_X 0x00010030 |
| #define TOUCH_REPORT_USAGE_PG_Y 0x00010031 |
| #define TOUCH_REPORT_USAGE_PG_P 0x000D0030 |
| #define TOUCH_REPORT_USAGE_PG_CONTACTID 0x000D0051 |
| #define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT 0x000D0054 |
| #define TOUCH_REPORT_USAGE_PG_MAJ 0xFF010062 |
| #define TOUCH_REPORT_USAGE_PG_MIN 0xFF010063 |
| #define TOUCH_COL_USAGE_PG 0x000D0022 |
| |
| /* System Information interface definitions */ |
| struct cyttsp5_sensing_conf_data_dev { |
| u8 electrodes_x; |
| u8 electrodes_y; |
| __le16 len_x; |
| __le16 len_y; |
| __le16 res_x; |
| __le16 res_y; |
| __le16 max_z; |
| u8 origin_x; |
| u8 origin_y; |
| u8 btn; |
| u8 scan_mode; |
| u8 max_num_of_tch_per_refresh_cycle; |
| } __packed; |
| |
| struct cyttsp5_sensing_conf_data { |
| u16 res_x; |
| u16 res_y; |
| u16 max_z; |
| u16 len_x; |
| u16 len_y; |
| u8 origin_x; |
| u8 origin_y; |
| u8 max_tch; |
| }; |
| |
| enum cyttsp5_tch_abs { /* for ordering within the extracted touch data array */ |
| CY_TCH_X, /* X */ |
| CY_TCH_Y, /* Y */ |
| CY_TCH_P, /* P (Z) */ |
| CY_TCH_T, /* TOUCH ID */ |
| CY_TCH_MAJ, /* TOUCH_MAJOR */ |
| CY_TCH_MIN, /* TOUCH_MINOR */ |
| CY_TCH_NUM_ABS |
| }; |
| |
| struct cyttsp5_tch_abs_params { |
| size_t ofs; /* abs byte offset */ |
| size_t size; /* size in bits */ |
| size_t min; /* min value */ |
| size_t max; /* max value */ |
| size_t bofs; /* bit offset */ |
| }; |
| |
| struct cyttsp5_touch { |
| int abs[CY_TCH_NUM_ABS]; |
| }; |
| |
| struct cyttsp5_sysinfo { |
| struct cyttsp5_sensing_conf_data sensing_conf_data; |
| int num_btns; |
| struct cyttsp5_tch_abs_params tch_hdr; |
| struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS]; |
| u32 key_code[HID_SYSINFO_MAX_BTN]; |
| }; |
| |
| struct cyttsp5_hid_desc { |
| __le16 hid_desc_len; |
| u8 packet_id; |
| u8 reserved_byte; |
| __le16 bcd_version; |
| __le16 report_desc_len; |
| __le16 report_desc_register; |
| __le16 input_register; |
| __le16 max_input_len; |
| __le16 output_register; |
| __le16 max_output_len; |
| __le16 command_register; |
| __le16 data_register; |
| __le16 vendor_id; |
| __le16 product_id; |
| __le16 version_id; |
| u8 reserved[4]; |
| } __packed; |
| |
| struct cyttsp5 { |
| struct device *dev; |
| struct completion cmd_done; |
| struct cyttsp5_sysinfo sysinfo; |
| struct cyttsp5_hid_desc hid_desc; |
| u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER]; |
| u8 input_buf[CY_MAX_INPUT]; |
| u8 response_buf[CY_MAX_INPUT]; |
| struct gpio_desc *reset_gpio; |
| struct input_dev *input; |
| char phys[NAME_MAX]; |
| int num_prv_rec; |
| struct regmap *regmap; |
| struct touchscreen_properties prop; |
| struct regulator *vdd; |
| }; |
| |
| /* |
| * For what is understood in the datasheet, the register does not |
| * matter. For consistency, use the Input Register address |
| * but it does mean anything to the device. The important data |
| * to send is the I2C address |
| */ |
| static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max) |
| { |
| int error; |
| u32 size; |
| u8 temp[2]; |
| |
| /* Read the frame to retrieve the size */ |
| error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, sizeof(temp)); |
| if (error) |
| return error; |
| |
| size = get_unaligned_le16(temp); |
| if (!size || size == 2) |
| return 0; |
| |
| if (size > max) |
| return -EINVAL; |
| |
| /* Get the real value */ |
| return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size); |
| } |
| |
| static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data, |
| size_t size) |
| { |
| u8 cmd[HID_OUTPUT_MAX_CMD_SIZE]; |
| |
| if (size + 1 > HID_OUTPUT_MAX_CMD_SIZE) |
| return -E2BIG; |
| |
| /* High bytes of register address needed as first byte of cmd */ |
| cmd[0] = (reg >> 8) & 0xFF; |
| |
| /* Copy the rest of the data */ |
| if (data) |
| memcpy(&cmd[1], data, size); |
| |
| /* |
| * The hardware wants to receive a frame with the address register |
| * contained in the first two bytes. As the regmap_write function |
| * add the register adresse in the frame, we use the low byte as |
| * first frame byte for the address register and the first |
| * data byte is the high register + left of the cmd to send |
| */ |
| return regmap_bulk_write(ts->regmap, reg & 0xFF, cmd, size + 1); |
| } |
| |
| static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data, |
| int bofs) |
| { |
| int nbyte; |
| |
| for (nbyte = 0, *axis = 0; nbyte < size; nbyte++) |
| *axis += ((xy_data[nbyte] >> bofs) << (nbyte * 8)); |
| |
| *axis &= max - 1; |
| } |
| |
| static void cyttsp5_get_touch_record(struct cyttsp5 *ts, |
| struct cyttsp5_touch *touch, u8 *xy_data) |
| { |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| enum cyttsp5_tch_abs abs; |
| |
| for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) |
| cyttsp5_get_touch_axis(&touch->abs[abs], |
| si->tch_abs[abs].size, |
| si->tch_abs[abs].max, |
| xy_data + si->tch_abs[abs].ofs, |
| si->tch_abs[abs].bofs); |
| } |
| |
| static void cyttsp5_get_mt_touches(struct cyttsp5 *ts, |
| struct cyttsp5_touch *tch, int num_cur_tch) |
| { |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| int i, t = 0, offset = 0; |
| DECLARE_BITMAP(ids, MAX_CY_TCH_T_IDS); |
| u8 *tch_addr; |
| int tmp; |
| |
| bitmap_zero(ids, MAX_CY_TCH_T_IDS); |
| memset(tch->abs, 0, sizeof(tch->abs)); |
| |
| switch (ts->input_buf[2]) { |
| case HID_TOUCH_REPORT_ID: |
| offset = TOUCH_INPUT_HEADER_SIZE; |
| break; |
| case HID_BTN_REPORT_ID: |
| offset = BTN_INPUT_HEADER_SIZE; |
| break; |
| } |
| |
| for (i = 0; i < num_cur_tch; i++) { |
| tch_addr = ts->input_buf + offset + (i * TOUCH_REPORT_SIZE); |
| cyttsp5_get_touch_record(ts, tch, tch_addr); |
| |
| /* Convert MAJOR/MINOR from mm to resolution */ |
| tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x; |
| tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x; |
| tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x; |
| tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x; |
| |
| t = tch->abs[CY_TCH_T]; |
| input_mt_slot(ts->input, t); |
| input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); |
| __set_bit(t, ids); |
| |
| /* position and pressure fields */ |
| touchscreen_report_pos(ts->input, &ts->prop, |
| tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y], |
| true); |
| input_report_abs(ts->input, ABS_MT_PRESSURE, |
| tch->abs[CY_TCH_P]); |
| |
| /* Get the extended touch fields */ |
| input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, |
| tch->abs[CY_TCH_MAJ]); |
| input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, |
| tch->abs[CY_TCH_MIN]); |
| } |
| |
| ts->num_prv_rec = num_cur_tch; |
| } |
| |
| static int cyttsp5_mt_attention(struct device *dev) |
| { |
| struct cyttsp5 *ts = dev_get_drvdata(dev); |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| int max_tch = si->sensing_conf_data.max_tch; |
| struct cyttsp5_touch tch; |
| int num_cur_tch; |
| |
| cyttsp5_get_touch_axis(&num_cur_tch, si->tch_hdr.size, |
| si->tch_hdr.max, |
| ts->input_buf + 3 + si->tch_hdr.ofs, |
| si->tch_hdr.bofs); |
| |
| if (num_cur_tch > max_tch) { |
| dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch); |
| num_cur_tch = max_tch; |
| } |
| |
| if (num_cur_tch == 0 && ts->num_prv_rec == 0) |
| return 0; |
| |
| /* extract xy_data for all currently reported touches */ |
| if (num_cur_tch) |
| cyttsp5_get_mt_touches(ts, &tch, num_cur_tch); |
| |
| input_mt_sync_frame(ts->input); |
| input_sync(ts->input); |
| |
| return 0; |
| } |
| |
| static int cyttsp5_setup_input_device(struct device *dev) |
| { |
| struct cyttsp5 *ts = dev_get_drvdata(dev); |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| int max_x, max_y, max_p; |
| int max_x_tmp, max_y_tmp; |
| int error; |
| |
| max_x_tmp = si->sensing_conf_data.res_x; |
| max_y_tmp = si->sensing_conf_data.res_y; |
| max_x = max_x_tmp - 1; |
| max_y = max_y_tmp - 1; |
| max_p = si->sensing_conf_data.max_z; |
| |
| input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0); |
| |
| input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); |
| input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0); |
| |
| error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, |
| INPUT_MT_DROP_UNUSED | INPUT_MT_DIRECT); |
| if (error) |
| return error; |
| |
| error = input_register_device(ts->input); |
| if (error) { |
| dev_err(dev, "failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| return error; |
| } |
| |
| static int cyttsp5_parse_dt_key_code(struct device *dev) |
| { |
| struct cyttsp5 *ts = dev_get_drvdata(dev); |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| |
| if (!si->num_btns) |
| return 0; |
| |
| /* Initialize the button to RESERVED */ |
| memset32(si->key_code, KEY_RESERVED, si->num_btns); |
| |
| return device_property_read_u32_array(dev, "linux,keycodes", |
| si->key_code, si->num_btns); |
| } |
| |
| static int cyttsp5_btn_attention(struct device *dev) |
| { |
| struct cyttsp5 *ts = dev_get_drvdata(dev); |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| int cur_btn, offset = 0; |
| int cur_btn_state; |
| |
| switch (ts->input_buf[2]) { |
| case HID_TOUCH_REPORT_ID: |
| offset = TOUCH_INPUT_HEADER_SIZE; |
| break; |
| case HID_BTN_REPORT_ID: |
| offset = BTN_INPUT_HEADER_SIZE; |
| break; |
| } |
| |
| if (ts->input_buf[2] != HID_BTN_REPORT_ID) |
| return 0; |
| |
| /* extract button press/release touch information */ |
| for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) { |
| /* Get current button state */ |
| cur_btn_state = (ts->input_buf[offset] >> (cur_btn * CY_BITS_PER_BTN)) |
| & CY_NUM_BTN_EVENT_ID; |
| |
| input_report_key(ts->input, si->key_code[cur_btn], |
| cur_btn_state); |
| input_sync(ts->input); |
| } |
| |
| return 0; |
| } |
| |
| static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code) |
| { |
| u16 size, crc; |
| u8 status, report_id; |
| int command_code; |
| |
| size = get_unaligned_le16(&ts->response_buf[0]); |
| if (!size) |
| return 0; |
| |
| report_id = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET]; |
| |
| switch (report_id) { |
| case HID_BL_RESPONSE_REPORT_ID: |
| if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) { |
| dev_err(ts->dev, "HID output response, wrong SOP\n"); |
| return -EPROTO; |
| } |
| |
| if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) { |
| dev_err(ts->dev, "HID output response, wrong EOP\n"); |
| return -EPROTO; |
| } |
| |
| crc = crc_itu_t(0xFFFF, &ts->response_buf[4], size - 7); |
| if (get_unaligned_le16(&ts->response_buf[size - 3]) != crc) { |
| dev_err(ts->dev, |
| "HID output response, wrong CRC 0x%X\n", |
| crc); |
| return -EPROTO; |
| } |
| |
| status = ts->response_buf[5]; |
| if (status) { |
| dev_err(ts->dev, "HID output response, ERROR:%d\n", |
| status); |
| return -EPROTO; |
| } |
| break; |
| |
| case HID_APP_RESPONSE_REPORT_ID: |
| command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET] |
| & HID_OUTPUT_RESPONSE_CMD_MASK; |
| if (command_code != code) { |
| dev_err(ts->dev, |
| "HID output response, wrong command_code:%X\n", |
| command_code); |
| return -EPROTO; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts) |
| { |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET] & |
| HID_SYSINFO_BTN_MASK; |
| |
| si->num_btns = hweight8(btns); |
| } |
| |
| static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts) |
| { |
| struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data; |
| struct cyttsp5_sensing_conf_data_dev *scd_dev = |
| (struct cyttsp5_sensing_conf_data_dev *) |
| &ts->response_buf[HID_SYSINFO_SENSING_OFFSET]; |
| |
| cyttsp5_si_get_btn_data(ts); |
| |
| scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle; |
| scd->res_x = get_unaligned_le16(&scd_dev->res_x); |
| scd->res_y = get_unaligned_le16(&scd_dev->res_y); |
| scd->max_z = get_unaligned_le16(&scd_dev->max_z); |
| scd->len_x = get_unaligned_le16(&scd_dev->len_x); |
| scd->len_y = get_unaligned_le16(&scd_dev->len_y); |
| |
| return 0; |
| } |
| |
| static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts) |
| { |
| int rc; |
| u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE]; |
| |
| /* HI bytes of Output register address */ |
| put_unaligned_le16(HID_OUTPUT_GET_SYSINFO_SIZE, cmd); |
| cmd[2] = HID_APP_OUTPUT_REPORT_ID; |
| cmd[3] = 0x0; /* Reserved */ |
| cmd[4] = HID_OUTPUT_GET_SYSINFO; |
| |
| rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, |
| HID_OUTPUT_GET_SYSINFO_SIZE); |
| if (rc) { |
| dev_err(ts->dev, "Failed to write command %d", rc); |
| return rc; |
| } |
| |
| rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, |
| msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS)); |
| if (rc <= 0) { |
| dev_err(ts->dev, "HID output cmd execution timed out\n"); |
| rc = -ETIMEDOUT; |
| return rc; |
| } |
| |
| rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO); |
| if (rc) { |
| dev_err(ts->dev, "Validation of the response failed\n"); |
| return rc; |
| } |
| |
| return cyttsp5_get_sysinfo_regs(ts); |
| } |
| |
| static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts) |
| { |
| int rc; |
| u8 cmd[HID_OUTPUT_BL_LAUNCH_APP]; |
| u16 crc; |
| |
| put_unaligned_le16(HID_OUTPUT_BL_LAUNCH_APP_SIZE, cmd); |
| cmd[2] = HID_BL_OUTPUT_REPORT_ID; |
| cmd[3] = 0x0; /* Reserved */ |
| cmd[4] = HID_OUTPUT_BL_SOP; |
| cmd[5] = HID_OUTPUT_BL_LAUNCH_APP; |
| put_unaligned_le16(0x00, &cmd[6]); |
| crc = crc_itu_t(0xFFFF, &cmd[4], 4); |
| put_unaligned_le16(crc, &cmd[8]); |
| cmd[10] = HID_OUTPUT_BL_EOP; |
| |
| rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, |
| HID_OUTPUT_BL_LAUNCH_APP_SIZE); |
| if (rc) { |
| dev_err(ts->dev, "Failed to write command %d", rc); |
| return rc; |
| } |
| |
| rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, |
| msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT_MS)); |
| if (rc <= 0) { |
| dev_err(ts->dev, "HID output cmd execution timed out\n"); |
| rc = -ETIMEDOUT; |
| return rc; |
| } |
| |
| rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP); |
| if (rc) { |
| dev_err(ts->dev, "Validation of the response failed\n"); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts, |
| struct cyttsp5_hid_desc *desc) |
| { |
| struct device *dev = ts->dev; |
| __le16 hid_desc_register = cpu_to_le16(HID_DESC_REG); |
| int rc; |
| u8 cmd[2]; |
| |
| /* Set HID descriptor register */ |
| memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register)); |
| |
| rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0); |
| if (rc) { |
| dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, |
| msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS)); |
| if (rc <= 0) { |
| dev_err(ts->dev, "HID get descriptor timed out\n"); |
| rc = -ETIMEDOUT; |
| return rc; |
| } |
| |
| memcpy(desc, ts->response_buf, sizeof(*desc)); |
| |
| /* Check HID descriptor length and version */ |
| if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) || |
| le16_to_cpu(desc->bcd_version) != HID_VERSION) { |
| dev_err(dev, "Unsupported HID version\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size, |
| int offset) |
| { |
| tch_abs->ofs = offset / 8; |
| tch_abs->size = report_size / 8; |
| if (report_size % 8) |
| tch_abs->size += 1; |
| tch_abs->min = 0; |
| tch_abs->max = 1 << report_size; |
| tch_abs->bofs = offset - (tch_abs->ofs << 3); |
| |
| return 0; |
| } |
| |
| static irqreturn_t cyttsp5_handle_irq(int irq, void *handle) |
| { |
| struct cyttsp5 *ts = handle; |
| int report_id; |
| int size; |
| int error; |
| |
| error = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT); |
| if (error) |
| return IRQ_HANDLED; |
| |
| size = get_unaligned_le16(&ts->input_buf[0]); |
| if (size == 0) { |
| /* reset */ |
| report_id = 0; |
| size = 2; |
| } else { |
| report_id = ts->input_buf[2]; |
| } |
| |
| switch (report_id) { |
| case HID_TOUCH_REPORT_ID: |
| cyttsp5_mt_attention(ts->dev); |
| break; |
| case HID_BTN_REPORT_ID: |
| cyttsp5_btn_attention(ts->dev); |
| break; |
| default: |
| /* It is not an input but a command response */ |
| memcpy(ts->response_buf, ts->input_buf, size); |
| complete(&ts->cmd_done); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int cyttsp5_deassert_int(struct cyttsp5 *ts) |
| { |
| u16 size; |
| u8 buf[2]; |
| int error; |
| |
| error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, sizeof(buf)); |
| if (error < 0) |
| return error; |
| |
| size = get_unaligned_le16(&buf[0]); |
| if (size == 2 || size == 0) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static int cyttsp5_fill_all_touch(struct cyttsp5 *ts) |
| { |
| struct cyttsp5_sysinfo *si = &ts->sysinfo; |
| |
| fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16, |
| TOUCH_REPORT_DESC_X); |
| fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16, |
| TOUCH_REPORT_DESC_Y); |
| fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8, |
| TOUCH_REPORT_DESC_P); |
| fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5, |
| TOUCH_REPORT_DESC_CONTACTID); |
| fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5, |
| TOUCH_REPORT_DESC_HDR_CONTACTCOUNT); |
| fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8, |
| TOUCH_REPORT_DESC_MAJ); |
| fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8, |
| TOUCH_REPORT_DESC_MIN); |
| |
| return 0; |
| } |
| |
| static int cyttsp5_startup(struct cyttsp5 *ts) |
| { |
| int error; |
| |
| error = cyttsp5_deassert_int(ts); |
| if (error) { |
| dev_err(ts->dev, "Error on deassert int r=%d\n", error); |
| return -ENODEV; |
| } |
| |
| /* |
| * Launch the application as the device starts in bootloader mode |
| * because of a power-on-reset |
| */ |
| error = cyttsp5_hid_output_bl_launch_app(ts); |
| if (error < 0) { |
| dev_err(ts->dev, "Error on launch app r=%d\n", error); |
| return error; |
| } |
| |
| error = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc); |
| if (error < 0) { |
| dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", error); |
| return error; |
| } |
| |
| error = cyttsp5_fill_all_touch(ts); |
| if (error < 0) { |
| dev_err(ts->dev, "Error on report descriptor r=%d\n", error); |
| return error; |
| } |
| |
| error = cyttsp5_hid_output_get_sysinfo(ts); |
| if (error) { |
| dev_err(ts->dev, "Error on getting sysinfo r=%d\n", error); |
| return error; |
| } |
| |
| return error; |
| } |
| |
| static void cyttsp5_cleanup(void *data) |
| { |
| struct cyttsp5 *ts = data; |
| |
| regulator_disable(ts->vdd); |
| } |
| |
| static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq, |
| const char *name) |
| { |
| struct cyttsp5 *ts; |
| struct cyttsp5_sysinfo *si; |
| int error, i; |
| |
| ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); |
| if (!ts) |
| return -ENOMEM; |
| |
| /* Initialize device info */ |
| ts->regmap = regmap; |
| ts->dev = dev; |
| si = &ts->sysinfo; |
| dev_set_drvdata(dev, ts); |
| |
| init_completion(&ts->cmd_done); |
| |
| /* Power up the device */ |
| ts->vdd = devm_regulator_get(dev, "vdd"); |
| if (IS_ERR(ts->vdd)) { |
| error = PTR_ERR(ts->vdd); |
| return error; |
| } |
| |
| error = devm_add_action_or_reset(dev, cyttsp5_cleanup, ts); |
| if (error) |
| return error; |
| |
| error = regulator_enable(ts->vdd); |
| if (error) |
| return error; |
| |
| ts->input = devm_input_allocate_device(dev); |
| if (!ts->input) { |
| dev_err(dev, "Error, failed to allocate input device\n"); |
| return -ENODEV; |
| } |
| |
| ts->input->name = "cyttsp5"; |
| scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); |
| ts->input->phys = ts->phys; |
| input_set_drvdata(ts->input, ts); |
| |
| /* Reset the gpio to be in a reset state */ |
| ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(ts->reset_gpio)) { |
| error = PTR_ERR(ts->reset_gpio); |
| dev_err(dev, "Failed to request reset gpio, error %d\n", error); |
| return error; |
| } |
| gpiod_set_value_cansleep(ts->reset_gpio, 0); |
| |
| /* Need a delay to have device up */ |
| msleep(20); |
| |
| error = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq, |
| IRQF_ONESHOT, name, ts); |
| if (error) { |
| dev_err(dev, "unable to request IRQ\n"); |
| return error; |
| } |
| |
| error = cyttsp5_startup(ts); |
| if (error) { |
| dev_err(ts->dev, "Fail initial startup r=%d\n", error); |
| return error; |
| } |
| |
| error = cyttsp5_parse_dt_key_code(dev); |
| if (error < 0) { |
| dev_err(ts->dev, "Error while parsing dts %d\n", error); |
| return error; |
| } |
| |
| touchscreen_parse_properties(ts->input, true, &ts->prop); |
| |
| __set_bit(EV_KEY, ts->input->evbit); |
| for (i = 0; i < si->num_btns; i++) |
| __set_bit(si->key_code[i], ts->input->keybit); |
| |
| return cyttsp5_setup_input_device(dev); |
| } |
| |
| static int cyttsp5_i2c_probe(struct i2c_client *client) |
| { |
| struct regmap *regmap; |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| regmap = devm_regmap_init_i2c(client, &config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "regmap allocation failed: %ld\n", |
| PTR_ERR(regmap)); |
| return PTR_ERR(regmap); |
| } |
| |
| return cyttsp5_probe(&client->dev, regmap, client->irq, client->name); |
| } |
| |
| static const struct of_device_id cyttsp5_of_match[] = { |
| { .compatible = "cypress,tt21000", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, cyttsp5_of_match); |
| |
| static const struct i2c_device_id cyttsp5_i2c_id[] = { |
| { CYTTSP5_NAME, 0, }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id); |
| |
| static struct i2c_driver cyttsp5_i2c_driver = { |
| .driver = { |
| .name = CYTTSP5_NAME, |
| .of_match_table = cyttsp5_of_match, |
| }, |
| .probe_new = cyttsp5_i2c_probe, |
| .id_table = cyttsp5_i2c_id, |
| }; |
| module_i2c_driver(cyttsp5_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product"); |
| MODULE_AUTHOR("Mylène Josserand <mylene.josserand@bootlin.com>"); |