blob: 782a24f27f3e0f1f3ba6b11fab19167de8ae0a91 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/* Marvell Octeon EP (EndPoint) Ethernet Driver
*
* Copyright (C) 2020 Marvell.
*
*/
#ifndef _OCTEP_RX_H_
#define _OCTEP_RX_H_
/* struct octep_oq_desc_hw - Octeon Hardware OQ descriptor format.
*
* The descriptor ring is made of descriptors which have 2 64-bit values:
*
* @buffer_ptr: DMA address of the skb->data
* @info_ptr: DMA address of host memory, used to update pkt count by hw.
* This is currently unused to save pci writes.
*/
struct octep_oq_desc_hw {
dma_addr_t buffer_ptr;
u64 info_ptr;
};
#define OCTEP_OQ_DESC_SIZE (sizeof(struct octep_oq_desc_hw))
#define OCTEP_CSUM_L4_VERIFIED 0x1
#define OCTEP_CSUM_IP_VERIFIED 0x2
#define OCTEP_CSUM_VERIFIED (OCTEP_CSUM_L4_VERIFIED | OCTEP_CSUM_IP_VERIFIED)
/* Extended Response Header in packet data received from Hardware.
* Includes metadata like checksum status.
* this is valid only if hardware/firmware published support for this.
* This is at offset 0 of packet data (skb->data).
*/
struct octep_oq_resp_hw_ext {
/* Reserved. */
u64 reserved:62;
/* checksum verified. */
u64 csum_verified:2;
};
#define OCTEP_OQ_RESP_HW_EXT_SIZE (sizeof(struct octep_oq_resp_hw_ext))
/* Length of Rx packet DMA'ed by Octeon to Host.
* this is in bigendian; so need to be converted to cpu endian.
* Octeon writes this at the beginning of Rx buffer (skb->data).
*/
struct octep_oq_resp_hw {
/* The Length of the packet. */
__be64 length;
};
#define OCTEP_OQ_RESP_HW_SIZE (sizeof(struct octep_oq_resp_hw))
/* Pointer to data buffer.
* Driver keeps a pointer to the data buffer that it made available to
* the Octeon device. Since the descriptor ring keeps physical (bus)
* addresses, this field is required for the driver to keep track of
* the virtual address pointers. The fields are operated by
* OS-dependent routines.
*/
struct octep_rx_buffer {
struct page *page;
/* length from rx hardware descriptor after converting to cpu endian */
u64 len;
};
#define OCTEP_OQ_RECVBUF_SIZE (sizeof(struct octep_rx_buffer))
/* Output Queue statistics. Each output queue has four stats fields. */
struct octep_oq_stats {
/* Number of packets received from the Device. */
u64 packets;
/* Number of bytes received from the Device. */
u64 bytes;
/* Number of times failed to allocate buffers. */
u64 alloc_failures;
};
#define OCTEP_OQ_STATS_SIZE (sizeof(struct octep_oq_stats))
/* Hardware interface Rx statistics */
struct octep_iface_rx_stats {
/* Received packets */
u64 pkts;
/* Octets of received packets */
u64 octets;
/* Received PAUSE and Control packets */
u64 pause_pkts;
/* Received PAUSE and Control octets */
u64 pause_octets;
/* Filtered DMAC0 packets */
u64 dmac0_pkts;
/* Filtered DMAC0 octets */
u64 dmac0_octets;
/* Packets dropped due to RX FIFO full */
u64 dropped_pkts_fifo_full;
/* Octets dropped due to RX FIFO full */
u64 dropped_octets_fifo_full;
/* Error packets */
u64 err_pkts;
/* Filtered DMAC1 packets */
u64 dmac1_pkts;
/* Filtered DMAC1 octets */
u64 dmac1_octets;
/* NCSI-bound packets dropped */
u64 ncsi_dropped_pkts;
/* NCSI-bound octets dropped */
u64 ncsi_dropped_octets;
/* Multicast packets received. */
u64 mcast_pkts;
/* Broadcast packets received. */
u64 bcast_pkts;
};
/* The Descriptor Ring Output Queue structure.
* This structure has all the information required to implement a
* Octeon OQ.
*/
struct octep_oq {
u32 q_no;
struct octep_device *octep_dev;
struct net_device *netdev;
struct device *dev;
struct napi_struct *napi;
/* The receive buffer list. This list has the virtual addresses
* of the buffers.
*/
struct octep_rx_buffer *buff_info;
/* Pointer to the mapped packet credit register.
* Host writes number of info/buffer ptrs available to this register
*/
u8 __iomem *pkts_credit_reg;
/* Pointer to the mapped packet sent register.
* Octeon writes the number of packets DMA'ed to host memory
* in this register.
*/
u8 __iomem *pkts_sent_reg;
/* Statistics for this OQ. */
struct octep_oq_stats stats;
/* Packets pending to be processed */
u32 pkts_pending;
u32 last_pkt_count;
/* Index in the ring where the driver should read the next packet */
u32 host_read_idx;
/* Number of descriptors in this ring. */
u32 max_count;
u32 ring_size_mask;
/* The number of descriptors pending refill. */
u32 refill_count;
/* Index in the ring where the driver will refill the
* descriptor's buffer
*/
u32 host_refill_idx;
u32 refill_threshold;
/* The size of each buffer pointed by the buffer pointer. */
u32 buffer_size;
u32 max_single_buffer_size;
/* The 8B aligned descriptor ring starts at this address. */
struct octep_oq_desc_hw *desc_ring;
/* DMA mapped address of the OQ descriptor ring. */
dma_addr_t desc_ring_dma;
};
#define OCTEP_OQ_SIZE (sizeof(struct octep_oq))
#endif /* _OCTEP_RX_H_ */