| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2018-2019 MediaTek Inc. |
| |
| /* A library for MediaTek SGMII circuit |
| * |
| * Author: Sean Wang <sean.wang@mediatek.com> |
| * |
| */ |
| |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/phylink.h> |
| #include <linux/regmap.h> |
| |
| #include "mtk_eth_soc.h" |
| |
| static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs) |
| { |
| return container_of(pcs, struct mtk_pcs, pcs); |
| } |
| |
| static void mtk_pcs_get_state(struct phylink_pcs *pcs, |
| struct phylink_link_state *state) |
| { |
| struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); |
| unsigned int bm, adv; |
| |
| /* Read the BMSR and LPA */ |
| regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm); |
| regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv); |
| |
| phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm), |
| FIELD_GET(SGMII_LPA, adv)); |
| } |
| |
| static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, |
| phy_interface_t interface, |
| const unsigned long *advertising, |
| bool permit_pause_to_mac) |
| { |
| struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); |
| unsigned int rgc3, sgm_mode, bmcr; |
| int advertise, link_timer; |
| bool changed, use_an; |
| |
| if (interface == PHY_INTERFACE_MODE_2500BASEX) |
| rgc3 = RG_PHY_SPEED_3_125G; |
| else |
| rgc3 = 0; |
| |
| advertise = phylink_mii_c22_pcs_encode_advertisement(interface, |
| advertising); |
| if (advertise < 0) |
| return advertise; |
| |
| link_timer = phylink_get_link_timer_ns(interface); |
| if (link_timer < 0) |
| return link_timer; |
| |
| /* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and |
| * we assume that fixes it's speed at bitrate = line rate (in |
| * other words, 1000Mbps or 2500Mbps). |
| */ |
| if (interface == PHY_INTERFACE_MODE_SGMII) { |
| sgm_mode = SGMII_IF_MODE_SGMII; |
| if (phylink_autoneg_inband(mode)) { |
| sgm_mode |= SGMII_REMOTE_FAULT_DIS | |
| SGMII_SPEED_DUPLEX_AN; |
| use_an = true; |
| } else { |
| use_an = false; |
| } |
| } else if (phylink_autoneg_inband(mode)) { |
| /* 1000base-X or 2500base-X autoneg */ |
| sgm_mode = SGMII_REMOTE_FAULT_DIS; |
| use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| advertising); |
| } else { |
| /* 1000base-X or 2500base-X without autoneg */ |
| sgm_mode = 0; |
| use_an = false; |
| } |
| |
| if (use_an) { |
| /* FIXME: Do we need to set AN_RESTART here? */ |
| bmcr = SGMII_AN_RESTART | SGMII_AN_ENABLE; |
| } else { |
| bmcr = 0; |
| } |
| |
| /* Configure the underlying interface speed */ |
| regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3, |
| RG_PHY_SPEED_3_125G, rgc3); |
| |
| /* Update the advertisement, noting whether it has changed */ |
| regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE, |
| SGMII_ADVERTISE, advertise, &changed); |
| |
| /* Setup the link timer and QPHY power up inside SGMIISYS */ |
| regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8); |
| |
| /* Update the sgmsys mode register */ |
| regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE, |
| SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN | |
| SGMII_IF_MODE_SGMII, sgm_mode); |
| |
| /* Update the BMCR */ |
| regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, |
| SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr); |
| |
| /* Release PHYA power down state */ |
| regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, |
| SGMII_PHYA_PWD, 0); |
| |
| return changed; |
| } |
| |
| static void mtk_pcs_restart_an(struct phylink_pcs *pcs) |
| { |
| struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); |
| |
| regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, |
| SGMII_AN_RESTART, SGMII_AN_RESTART); |
| } |
| |
| static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, |
| phy_interface_t interface, int speed, int duplex) |
| { |
| struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); |
| unsigned int sgm_mode; |
| |
| if (!phylink_autoneg_inband(mode)) { |
| /* Force the speed and duplex setting */ |
| if (speed == SPEED_10) |
| sgm_mode = SGMII_SPEED_10; |
| else if (speed == SPEED_100) |
| sgm_mode = SGMII_SPEED_100; |
| else |
| sgm_mode = SGMII_SPEED_1000; |
| |
| if (duplex == DUPLEX_FULL) |
| sgm_mode |= SGMII_DUPLEX_FULL; |
| |
| regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE, |
| SGMII_DUPLEX_FULL | SGMII_SPEED_MASK, |
| sgm_mode); |
| } |
| } |
| |
| static const struct phylink_pcs_ops mtk_pcs_ops = { |
| .pcs_get_state = mtk_pcs_get_state, |
| .pcs_config = mtk_pcs_config, |
| .pcs_an_restart = mtk_pcs_restart_an, |
| .pcs_link_up = mtk_pcs_link_up, |
| }; |
| |
| int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3) |
| { |
| struct device_node *np; |
| int i; |
| |
| for (i = 0; i < MTK_MAX_DEVS; i++) { |
| np = of_parse_phandle(r, "mediatek,sgmiisys", i); |
| if (!np) |
| break; |
| |
| ss->pcs[i].ana_rgc3 = ana_rgc3; |
| ss->pcs[i].regmap = syscon_node_to_regmap(np); |
| of_node_put(np); |
| if (IS_ERR(ss->pcs[i].regmap)) |
| return PTR_ERR(ss->pcs[i].regmap); |
| |
| ss->pcs[i].pcs.ops = &mtk_pcs_ops; |
| } |
| |
| return 0; |
| } |
| |
| struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id) |
| { |
| if (!ss->pcs[id].regmap) |
| return NULL; |
| |
| return &ss->pcs[id].pcs; |
| } |