| /* |
| This file is provided under a dual BSD/GPLv2 license. When using or |
| redistributing this file, you may do so under either license. |
| |
| GPL LICENSE SUMMARY |
| Copyright(c) 2014 Intel Corporation. |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| Contact Information: |
| qat-linux@intel.com |
| |
| BSD LICENSE |
| Copyright(c) 2014 Intel Corporation. |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in |
| the documentation and/or other materials provided with the |
| distribution. |
| * Neither the name of Intel Corporation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/aer.h> |
| #include <linux/completion.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| #include "adf_accel_devices.h" |
| #include "adf_common_drv.h" |
| |
| static struct workqueue_struct *device_reset_wq; |
| |
| static pci_ers_result_t adf_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev); |
| |
| pr_info("QAT: Acceleration driver hardware error detected.\n"); |
| if (!accel_dev) { |
| pr_err("QAT: Can't find acceleration device\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| if (state == pci_channel_io_perm_failure) { |
| pr_err("QAT: Can't recover from device error\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /* reset dev data */ |
| struct adf_reset_dev_data { |
| int mode; |
| struct adf_accel_dev *accel_dev; |
| struct completion compl; |
| struct work_struct reset_work; |
| }; |
| |
| #define PPDSTAT_OFFSET 0x7E |
| static void adf_dev_restore(struct adf_accel_dev *accel_dev) |
| { |
| struct pci_dev *pdev = accel_to_pci_dev(accel_dev); |
| struct pci_dev *parent = pdev->bus->self; |
| uint16_t ppdstat = 0, bridge_ctl = 0; |
| int pending = 0; |
| |
| pr_info("QAT: Reseting device qat_dev%d\n", accel_dev->accel_id); |
| pci_read_config_word(pdev, PPDSTAT_OFFSET, &ppdstat); |
| pending = ppdstat & PCI_EXP_DEVSTA_TRPND; |
| if (pending) { |
| int ctr = 0; |
| |
| do { |
| msleep(100); |
| pci_read_config_word(pdev, PPDSTAT_OFFSET, &ppdstat); |
| pending = ppdstat & PCI_EXP_DEVSTA_TRPND; |
| } while (pending && ctr++ < 10); |
| } |
| |
| if (pending) |
| pr_info("QAT: Transaction still in progress. Proceeding\n"); |
| |
| pci_read_config_word(parent, PCI_BRIDGE_CONTROL, &bridge_ctl); |
| bridge_ctl |= PCI_BRIDGE_CTL_BUS_RESET; |
| pci_write_config_word(parent, PCI_BRIDGE_CONTROL, bridge_ctl); |
| msleep(100); |
| bridge_ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; |
| pci_write_config_word(parent, PCI_BRIDGE_CONTROL, bridge_ctl); |
| msleep(100); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| } |
| |
| static void adf_device_reset_worker(struct work_struct *work) |
| { |
| struct adf_reset_dev_data *reset_data = |
| container_of(work, struct adf_reset_dev_data, reset_work); |
| struct adf_accel_dev *accel_dev = reset_data->accel_dev; |
| |
| adf_dev_restarting_notify(accel_dev); |
| adf_dev_stop(accel_dev); |
| adf_dev_restore(accel_dev); |
| if (adf_dev_start(accel_dev)) { |
| /* The device hanged and we can't restart it so stop here */ |
| dev_err(&GET_DEV(accel_dev), "Restart device failed\n"); |
| kfree(reset_data); |
| WARN(1, "QAT: device restart failed. Device is unusable\n"); |
| return; |
| } |
| adf_dev_restarted_notify(accel_dev); |
| clear_bit(ADF_STATUS_RESTARTING, &accel_dev->status); |
| |
| /* The dev is back alive. Notify the caller if in sync mode */ |
| if (reset_data->mode == ADF_DEV_RESET_SYNC) |
| complete(&reset_data->compl); |
| else |
| kfree(reset_data); |
| } |
| |
| static int adf_dev_aer_schedule_reset(struct adf_accel_dev *accel_dev, |
| enum adf_dev_reset_mode mode) |
| { |
| struct adf_reset_dev_data *reset_data; |
| |
| if (adf_dev_started(accel_dev) && |
| !test_bit(ADF_STATUS_RESTARTING, &accel_dev->status)) |
| return 0; |
| |
| set_bit(ADF_STATUS_RESTARTING, &accel_dev->status); |
| reset_data = kzalloc(sizeof(*reset_data), GFP_ATOMIC); |
| if (!reset_data) |
| return -ENOMEM; |
| reset_data->accel_dev = accel_dev; |
| init_completion(&reset_data->compl); |
| reset_data->mode = mode; |
| INIT_WORK(&reset_data->reset_work, adf_device_reset_worker); |
| queue_work(device_reset_wq, &reset_data->reset_work); |
| |
| /* If in sync mode wait for the result */ |
| if (mode == ADF_DEV_RESET_SYNC) { |
| int ret = 0; |
| /* Maximum device reset time is 10 seconds */ |
| unsigned long wait_jiffies = msecs_to_jiffies(10000); |
| unsigned long timeout = wait_for_completion_timeout( |
| &reset_data->compl, wait_jiffies); |
| if (!timeout) { |
| pr_err("QAT: Reset device timeout expired\n"); |
| ret = -EFAULT; |
| } |
| kfree(reset_data); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static pci_ers_result_t adf_slot_reset(struct pci_dev *pdev) |
| { |
| struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev); |
| |
| if (!accel_dev) { |
| pr_err("QAT: Can't find acceleration device\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| if (adf_dev_aer_schedule_reset(accel_dev, ADF_DEV_RESET_SYNC)) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void adf_resume(struct pci_dev *pdev) |
| { |
| pr_info("QAT: Acceleration driver reset completed\n"); |
| pr_info("QAT: Device is up and runnig\n"); |
| } |
| |
| static struct pci_error_handlers adf_err_handler = { |
| .error_detected = adf_error_detected, |
| .slot_reset = adf_slot_reset, |
| .resume = adf_resume, |
| }; |
| |
| /** |
| * adf_enable_aer() - Enable Advance Error Reporting for acceleration device |
| * @accel_dev: Pointer to acceleration device. |
| * @adf: PCI device driver owning the given acceleration device. |
| * |
| * Function enables PCI Advance Error Reporting for the |
| * QAT acceleration device accel_dev. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: 0 on success, error code othewise. |
| */ |
| int adf_enable_aer(struct adf_accel_dev *accel_dev, struct pci_driver *adf) |
| { |
| struct pci_dev *pdev = accel_to_pci_dev(accel_dev); |
| |
| adf->err_handler = &adf_err_handler; |
| pci_enable_pcie_error_reporting(pdev); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adf_enable_aer); |
| |
| /** |
| * adf_disable_aer() - Enable Advance Error Reporting for acceleration device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Function disables PCI Advance Error Reporting for the |
| * QAT acceleration device accel_dev. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: void |
| */ |
| void adf_disable_aer(struct adf_accel_dev *accel_dev) |
| { |
| struct pci_dev *pdev = accel_to_pci_dev(accel_dev); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| } |
| EXPORT_SYMBOL_GPL(adf_disable_aer); |
| |
| int adf_init_aer(void) |
| { |
| device_reset_wq = create_workqueue("qat_device_reset_wq"); |
| return (device_reset_wq == NULL) ? -EFAULT : 0; |
| } |
| |
| void adf_exit_aer(void) |
| { |
| if (device_reset_wq) |
| destroy_workqueue(device_reset_wq); |
| device_reset_wq = NULL; |
| } |