| /* |
| * SCSI Block Commands (SBC) parsing and emulation. |
| * |
| * (c) Copyright 2002-2012 RisingTide Systems LLC. |
| * |
| * Nicholas A. Bellinger <nab@kernel.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/ratelimit.h> |
| #include <asm/unaligned.h> |
| #include <scsi/scsi.h> |
| |
| #include <target/target_core_base.h> |
| #include <target/target_core_backend.h> |
| #include <target/target_core_fabric.h> |
| |
| #include "target_core_internal.h" |
| #include "target_core_ua.h" |
| |
| |
| static sense_reason_t |
| sbc_emulate_readcapacity(struct se_cmd *cmd) |
| { |
| struct se_device *dev = cmd->se_dev; |
| unsigned long long blocks_long = dev->transport->get_blocks(dev); |
| unsigned char *rbuf; |
| unsigned char buf[8]; |
| u32 blocks; |
| |
| if (blocks_long >= 0x00000000ffffffff) |
| blocks = 0xffffffff; |
| else |
| blocks = (u32)blocks_long; |
| |
| buf[0] = (blocks >> 24) & 0xff; |
| buf[1] = (blocks >> 16) & 0xff; |
| buf[2] = (blocks >> 8) & 0xff; |
| buf[3] = blocks & 0xff; |
| buf[4] = (dev->dev_attrib.block_size >> 24) & 0xff; |
| buf[5] = (dev->dev_attrib.block_size >> 16) & 0xff; |
| buf[6] = (dev->dev_attrib.block_size >> 8) & 0xff; |
| buf[7] = dev->dev_attrib.block_size & 0xff; |
| |
| rbuf = transport_kmap_data_sg(cmd); |
| if (rbuf) { |
| memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); |
| transport_kunmap_data_sg(cmd); |
| } |
| |
| target_complete_cmd(cmd, GOOD); |
| return 0; |
| } |
| |
| static sense_reason_t |
| sbc_emulate_readcapacity_16(struct se_cmd *cmd) |
| { |
| struct se_device *dev = cmd->se_dev; |
| unsigned char *rbuf; |
| unsigned char buf[32]; |
| unsigned long long blocks = dev->transport->get_blocks(dev); |
| |
| memset(buf, 0, sizeof(buf)); |
| buf[0] = (blocks >> 56) & 0xff; |
| buf[1] = (blocks >> 48) & 0xff; |
| buf[2] = (blocks >> 40) & 0xff; |
| buf[3] = (blocks >> 32) & 0xff; |
| buf[4] = (blocks >> 24) & 0xff; |
| buf[5] = (blocks >> 16) & 0xff; |
| buf[6] = (blocks >> 8) & 0xff; |
| buf[7] = blocks & 0xff; |
| buf[8] = (dev->dev_attrib.block_size >> 24) & 0xff; |
| buf[9] = (dev->dev_attrib.block_size >> 16) & 0xff; |
| buf[10] = (dev->dev_attrib.block_size >> 8) & 0xff; |
| buf[11] = dev->dev_attrib.block_size & 0xff; |
| /* |
| * Set Thin Provisioning Enable bit following sbc3r22 in section |
| * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled. |
| */ |
| if (dev->dev_attrib.emulate_tpu || dev->dev_attrib.emulate_tpws) |
| buf[14] = 0x80; |
| |
| rbuf = transport_kmap_data_sg(cmd); |
| if (rbuf) { |
| memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); |
| transport_kunmap_data_sg(cmd); |
| } |
| |
| target_complete_cmd(cmd, GOOD); |
| return 0; |
| } |
| |
| sector_t spc_get_write_same_sectors(struct se_cmd *cmd) |
| { |
| u32 num_blocks; |
| |
| if (cmd->t_task_cdb[0] == WRITE_SAME) |
| num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]); |
| else if (cmd->t_task_cdb[0] == WRITE_SAME_16) |
| num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]); |
| else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */ |
| num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]); |
| |
| /* |
| * Use the explicit range when non zero is supplied, otherwise calculate |
| * the remaining range based on ->get_blocks() - starting LBA. |
| */ |
| if (num_blocks) |
| return num_blocks; |
| |
| return cmd->se_dev->transport->get_blocks(cmd->se_dev) - |
| cmd->t_task_lba + 1; |
| } |
| EXPORT_SYMBOL(spc_get_write_same_sectors); |
| |
| static sense_reason_t |
| sbc_emulate_noop(struct se_cmd *cmd) |
| { |
| target_complete_cmd(cmd, GOOD); |
| return 0; |
| } |
| |
| static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors) |
| { |
| return cmd->se_dev->dev_attrib.block_size * sectors; |
| } |
| |
| static int sbc_check_valid_sectors(struct se_cmd *cmd) |
| { |
| struct se_device *dev = cmd->se_dev; |
| unsigned long long end_lba; |
| u32 sectors; |
| |
| sectors = cmd->data_length / dev->dev_attrib.block_size; |
| end_lba = dev->transport->get_blocks(dev) + 1; |
| |
| if (cmd->t_task_lba + sectors > end_lba) { |
| pr_err("target: lba %llu, sectors %u exceeds end lba %llu\n", |
| cmd->t_task_lba, sectors, end_lba); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static inline u32 transport_get_sectors_6(unsigned char *cdb) |
| { |
| /* |
| * Use 8-bit sector value. SBC-3 says: |
| * |
| * A TRANSFER LENGTH field set to zero specifies that 256 |
| * logical blocks shall be written. Any other value |
| * specifies the number of logical blocks that shall be |
| * written. |
| */ |
| return cdb[4] ? : 256; |
| } |
| |
| static inline u32 transport_get_sectors_10(unsigned char *cdb) |
| { |
| return (u32)(cdb[7] << 8) + cdb[8]; |
| } |
| |
| static inline u32 transport_get_sectors_12(unsigned char *cdb) |
| { |
| return (u32)(cdb[6] << 24) + (cdb[7] << 16) + (cdb[8] << 8) + cdb[9]; |
| } |
| |
| static inline u32 transport_get_sectors_16(unsigned char *cdb) |
| { |
| return (u32)(cdb[10] << 24) + (cdb[11] << 16) + |
| (cdb[12] << 8) + cdb[13]; |
| } |
| |
| /* |
| * Used for VARIABLE_LENGTH_CDB WRITE_32 and READ_32 variants |
| */ |
| static inline u32 transport_get_sectors_32(unsigned char *cdb) |
| { |
| return (u32)(cdb[28] << 24) + (cdb[29] << 16) + |
| (cdb[30] << 8) + cdb[31]; |
| |
| } |
| |
| static inline u32 transport_lba_21(unsigned char *cdb) |
| { |
| return ((cdb[1] & 0x1f) << 16) | (cdb[2] << 8) | cdb[3]; |
| } |
| |
| static inline u32 transport_lba_32(unsigned char *cdb) |
| { |
| return (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5]; |
| } |
| |
| static inline unsigned long long transport_lba_64(unsigned char *cdb) |
| { |
| unsigned int __v1, __v2; |
| |
| __v1 = (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5]; |
| __v2 = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; |
| |
| return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; |
| } |
| |
| /* |
| * For VARIABLE_LENGTH_CDB w/ 32 byte extended CDBs |
| */ |
| static inline unsigned long long transport_lba_64_ext(unsigned char *cdb) |
| { |
| unsigned int __v1, __v2; |
| |
| __v1 = (cdb[12] << 24) | (cdb[13] << 16) | (cdb[14] << 8) | cdb[15]; |
| __v2 = (cdb[16] << 24) | (cdb[17] << 16) | (cdb[18] << 8) | cdb[19]; |
| |
| return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; |
| } |
| |
| static sense_reason_t |
| sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *ops) |
| { |
| unsigned int sectors = spc_get_write_same_sectors(cmd); |
| |
| if ((flags[0] & 0x04) || (flags[0] & 0x02)) { |
| pr_err("WRITE_SAME PBDATA and LBDATA" |
| " bits not supported for Block Discard" |
| " Emulation\n"); |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| } |
| if (sectors > cmd->se_dev->dev_attrib.max_write_same_len) { |
| pr_warn("WRITE_SAME sectors: %u exceeds max_write_same_len: %u\n", |
| sectors, cmd->se_dev->dev_attrib.max_write_same_len); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| /* |
| * Special case for WRITE_SAME w/ UNMAP=1 that ends up getting |
| * translated into block discard requests within backend code. |
| */ |
| if (flags[0] & 0x08) { |
| if (!ops->execute_write_same_unmap) |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| |
| cmd->execute_cmd = ops->execute_write_same_unmap; |
| return 0; |
| } |
| if (!ops->execute_write_same) |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| |
| cmd->execute_cmd = ops->execute_write_same; |
| return 0; |
| } |
| |
| static void xdreadwrite_callback(struct se_cmd *cmd) |
| { |
| unsigned char *buf, *addr; |
| struct scatterlist *sg; |
| unsigned int offset; |
| int i; |
| int count; |
| /* |
| * From sbc3r22.pdf section 5.48 XDWRITEREAD (10) command |
| * |
| * 1) read the specified logical block(s); |
| * 2) transfer logical blocks from the data-out buffer; |
| * 3) XOR the logical blocks transferred from the data-out buffer with |
| * the logical blocks read, storing the resulting XOR data in a buffer; |
| * 4) if the DISABLE WRITE bit is set to zero, then write the logical |
| * blocks transferred from the data-out buffer; and |
| * 5) transfer the resulting XOR data to the data-in buffer. |
| */ |
| buf = kmalloc(cmd->data_length, GFP_KERNEL); |
| if (!buf) { |
| pr_err("Unable to allocate xor_callback buf\n"); |
| return; |
| } |
| /* |
| * Copy the scatterlist WRITE buffer located at cmd->t_data_sg |
| * into the locally allocated *buf |
| */ |
| sg_copy_to_buffer(cmd->t_data_sg, |
| cmd->t_data_nents, |
| buf, |
| cmd->data_length); |
| |
| /* |
| * Now perform the XOR against the BIDI read memory located at |
| * cmd->t_mem_bidi_list |
| */ |
| |
| offset = 0; |
| for_each_sg(cmd->t_bidi_data_sg, sg, cmd->t_bidi_data_nents, count) { |
| addr = kmap_atomic(sg_page(sg)); |
| if (!addr) |
| goto out; |
| |
| for (i = 0; i < sg->length; i++) |
| *(addr + sg->offset + i) ^= *(buf + offset + i); |
| |
| offset += sg->length; |
| kunmap_atomic(addr); |
| } |
| |
| out: |
| kfree(buf); |
| } |
| |
| sense_reason_t |
| sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops) |
| { |
| struct se_device *dev = cmd->se_dev; |
| unsigned char *cdb = cmd->t_task_cdb; |
| unsigned int size; |
| u32 sectors = 0; |
| sense_reason_t ret; |
| |
| switch (cdb[0]) { |
| case READ_6: |
| sectors = transport_get_sectors_6(cdb); |
| cmd->t_task_lba = transport_lba_21(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case READ_10: |
| sectors = transport_get_sectors_10(cdb); |
| cmd->t_task_lba = transport_lba_32(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case READ_12: |
| sectors = transport_get_sectors_12(cdb); |
| cmd->t_task_lba = transport_lba_32(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case READ_16: |
| sectors = transport_get_sectors_16(cdb); |
| cmd->t_task_lba = transport_lba_64(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case WRITE_6: |
| sectors = transport_get_sectors_6(cdb); |
| cmd->t_task_lba = transport_lba_21(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case WRITE_10: |
| case WRITE_VERIFY: |
| sectors = transport_get_sectors_10(cdb); |
| cmd->t_task_lba = transport_lba_32(cdb); |
| if (cdb[1] & 0x8) |
| cmd->se_cmd_flags |= SCF_FUA; |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case WRITE_12: |
| sectors = transport_get_sectors_12(cdb); |
| cmd->t_task_lba = transport_lba_32(cdb); |
| if (cdb[1] & 0x8) |
| cmd->se_cmd_flags |= SCF_FUA; |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case WRITE_16: |
| sectors = transport_get_sectors_16(cdb); |
| cmd->t_task_lba = transport_lba_64(cdb); |
| if (cdb[1] & 0x8) |
| cmd->se_cmd_flags |= SCF_FUA; |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| cmd->execute_cmd = ops->execute_rw; |
| break; |
| case XDWRITEREAD_10: |
| if (cmd->data_direction != DMA_TO_DEVICE || |
| !(cmd->se_cmd_flags & SCF_BIDI)) |
| return TCM_INVALID_CDB_FIELD; |
| sectors = transport_get_sectors_10(cdb); |
| |
| cmd->t_task_lba = transport_lba_32(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| |
| /* |
| * Setup BIDI XOR callback to be run after I/O completion. |
| */ |
| cmd->execute_cmd = ops->execute_rw; |
| cmd->transport_complete_callback = &xdreadwrite_callback; |
| if (cdb[1] & 0x8) |
| cmd->se_cmd_flags |= SCF_FUA; |
| break; |
| case VARIABLE_LENGTH_CMD: |
| { |
| u16 service_action = get_unaligned_be16(&cdb[8]); |
| switch (service_action) { |
| case XDWRITEREAD_32: |
| sectors = transport_get_sectors_32(cdb); |
| |
| /* |
| * Use WRITE_32 and READ_32 opcodes for the emulated |
| * XDWRITE_READ_32 logic. |
| */ |
| cmd->t_task_lba = transport_lba_64_ext(cdb); |
| cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; |
| |
| /* |
| * Setup BIDI XOR callback to be run during after I/O |
| * completion. |
| */ |
| cmd->execute_cmd = ops->execute_rw; |
| cmd->transport_complete_callback = &xdreadwrite_callback; |
| if (cdb[1] & 0x8) |
| cmd->se_cmd_flags |= SCF_FUA; |
| break; |
| case WRITE_SAME_32: |
| sectors = transport_get_sectors_32(cdb); |
| if (!sectors) { |
| pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not" |
| " supported\n"); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| |
| size = sbc_get_size(cmd, 1); |
| cmd->t_task_lba = get_unaligned_be64(&cdb[12]); |
| |
| ret = sbc_setup_write_same(cmd, &cdb[10], ops); |
| if (ret) |
| return ret; |
| break; |
| default: |
| pr_err("VARIABLE_LENGTH_CMD service action" |
| " 0x%04x not supported\n", service_action); |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| } |
| break; |
| } |
| case READ_CAPACITY: |
| size = READ_CAP_LEN; |
| cmd->execute_cmd = sbc_emulate_readcapacity; |
| break; |
| case SERVICE_ACTION_IN: |
| switch (cmd->t_task_cdb[1] & 0x1f) { |
| case SAI_READ_CAPACITY_16: |
| cmd->execute_cmd = sbc_emulate_readcapacity_16; |
| break; |
| default: |
| pr_err("Unsupported SA: 0x%02x\n", |
| cmd->t_task_cdb[1] & 0x1f); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| size = (cdb[10] << 24) | (cdb[11] << 16) | |
| (cdb[12] << 8) | cdb[13]; |
| break; |
| case SYNCHRONIZE_CACHE: |
| case SYNCHRONIZE_CACHE_16: |
| if (!ops->execute_sync_cache) |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| |
| /* |
| * Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE |
| */ |
| if (cdb[0] == SYNCHRONIZE_CACHE) { |
| sectors = transport_get_sectors_10(cdb); |
| cmd->t_task_lba = transport_lba_32(cdb); |
| } else { |
| sectors = transport_get_sectors_16(cdb); |
| cmd->t_task_lba = transport_lba_64(cdb); |
| } |
| |
| size = sbc_get_size(cmd, sectors); |
| |
| /* |
| * Check to ensure that LBA + Range does not exceed past end of |
| * device for IBLOCK and FILEIO ->do_sync_cache() backend calls |
| */ |
| if (cmd->t_task_lba || sectors) { |
| if (sbc_check_valid_sectors(cmd) < 0) |
| return TCM_INVALID_CDB_FIELD; |
| } |
| cmd->execute_cmd = ops->execute_sync_cache; |
| break; |
| case UNMAP: |
| if (!ops->execute_unmap) |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| |
| size = get_unaligned_be16(&cdb[7]); |
| cmd->execute_cmd = ops->execute_unmap; |
| break; |
| case WRITE_SAME_16: |
| sectors = transport_get_sectors_16(cdb); |
| if (!sectors) { |
| pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| |
| size = sbc_get_size(cmd, 1); |
| cmd->t_task_lba = get_unaligned_be64(&cdb[2]); |
| |
| ret = sbc_setup_write_same(cmd, &cdb[1], ops); |
| if (ret) |
| return ret; |
| break; |
| case WRITE_SAME: |
| sectors = transport_get_sectors_10(cdb); |
| if (!sectors) { |
| pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| |
| size = sbc_get_size(cmd, 1); |
| cmd->t_task_lba = get_unaligned_be32(&cdb[2]); |
| |
| /* |
| * Follow sbcr26 with WRITE_SAME (10) and check for the existence |
| * of byte 1 bit 3 UNMAP instead of original reserved field |
| */ |
| ret = sbc_setup_write_same(cmd, &cdb[1], ops); |
| if (ret) |
| return ret; |
| break; |
| case VERIFY: |
| size = 0; |
| cmd->execute_cmd = sbc_emulate_noop; |
| break; |
| case REZERO_UNIT: |
| case SEEK_6: |
| case SEEK_10: |
| /* |
| * There are still clients out there which use these old SCSI-2 |
| * commands. This mainly happens when running VMs with legacy |
| * guest systems, connected via SCSI command pass-through to |
| * iSCSI targets. Make them happy and return status GOOD. |
| */ |
| size = 0; |
| cmd->execute_cmd = sbc_emulate_noop; |
| break; |
| default: |
| ret = spc_parse_cdb(cmd, &size); |
| if (ret) |
| return ret; |
| } |
| |
| /* reject any command that we don't have a handler for */ |
| if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->execute_cmd) |
| return TCM_UNSUPPORTED_SCSI_OPCODE; |
| |
| if (cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) { |
| unsigned long long end_lba; |
| |
| if (sectors > dev->dev_attrib.fabric_max_sectors) { |
| printk_ratelimited(KERN_ERR "SCSI OP %02xh with too" |
| " big sectors %u exceeds fabric_max_sectors:" |
| " %u\n", cdb[0], sectors, |
| dev->dev_attrib.fabric_max_sectors); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| if (sectors > dev->dev_attrib.hw_max_sectors) { |
| printk_ratelimited(KERN_ERR "SCSI OP %02xh with too" |
| " big sectors %u exceeds backend hw_max_sectors:" |
| " %u\n", cdb[0], sectors, |
| dev->dev_attrib.hw_max_sectors); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| |
| end_lba = dev->transport->get_blocks(dev) + 1; |
| if (cmd->t_task_lba + sectors > end_lba) { |
| pr_err("cmd exceeds last lba %llu " |
| "(lba %llu, sectors %u)\n", |
| end_lba, cmd->t_task_lba, sectors); |
| return TCM_INVALID_CDB_FIELD; |
| } |
| |
| size = sbc_get_size(cmd, sectors); |
| } |
| |
| return target_cmd_size_check(cmd, size); |
| } |
| EXPORT_SYMBOL(sbc_parse_cdb); |
| |
| u32 sbc_get_device_type(struct se_device *dev) |
| { |
| return TYPE_DISK; |
| } |
| EXPORT_SYMBOL(sbc_get_device_type); |