| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // TAS2781 HDA I2C driver |
| // |
| // Copyright 2023 - 2024 Texas Instruments, Inc. |
| // |
| // Author: Shenghao Ding <shenghao-ding@ti.com> |
| // Current maintainer: Baojun Xu <baojun.xu@ti.com> |
| |
| #include <linux/unaligned.h> |
| #include <linux/acpi.h> |
| #include <linux/crc8.h> |
| #include <linux/crc32.h> |
| #include <linux/efi.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <sound/hda_codec.h> |
| #include <sound/soc.h> |
| #include <sound/tas2781.h> |
| #include <sound/tlv.h> |
| #include <sound/tas2781-tlv.h> |
| |
| #include "hda_local.h" |
| #include "hda_auto_parser.h" |
| #include "hda_component.h" |
| #include "hda_jack.h" |
| #include "hda_generic.h" |
| |
| #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 |
| |
| /* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD |
| * Define two controls, one is Volume control callbacks, the other is |
| * flag setting control callbacks. |
| */ |
| |
| /* Volume control callbacks for tas2781 */ |
| #define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ |
| xhandler_get, xhandler_put, tlv_array) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ |
| .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ |
| SNDRV_CTL_ELEM_ACCESS_READWRITE,\ |
| .tlv.p = (tlv_array), \ |
| .info = snd_soc_info_volsw_range, \ |
| .get = xhandler_get, .put = xhandler_put, \ |
| .private_value = (unsigned long)&(struct soc_mixer_control) \ |
| {.reg = xreg, .rreg = xreg, .shift = xshift, \ |
| .rshift = xshift, .min = xmin, .max = xmax, \ |
| .invert = xinvert} } |
| |
| /* Flag control callbacks for tas2781 */ |
| #define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ |
| .info = snd_ctl_boolean_mono_info, \ |
| .get = xhandler_get, .put = xhandler_put, \ |
| .private_value = xdata } |
| |
| enum calib_data { |
| R0_VAL = 0, |
| INV_R0, |
| R0LOW, |
| POWER, |
| TLIM, |
| CALIB_MAX |
| }; |
| |
| #define TAS2563_MAX_CHANNELS 4 |
| |
| #define TAS2563_CAL_POWER TASDEVICE_REG(0, 0x0d, 0x3c) |
| #define TAS2563_CAL_R0 TASDEVICE_REG(0, 0x0f, 0x34) |
| #define TAS2563_CAL_INVR0 TASDEVICE_REG(0, 0x0f, 0x40) |
| #define TAS2563_CAL_R0_LOW TASDEVICE_REG(0, 0x0f, 0x48) |
| #define TAS2563_CAL_TLIM TASDEVICE_REG(0, 0x10, 0x14) |
| #define TAS2563_CAL_N 5 |
| #define TAS2563_CAL_DATA_SIZE 4 |
| #define TAS2563_CAL_CH_SIZE 20 |
| #define TAS2563_CAL_ARRAY_SIZE 80 |
| |
| static unsigned int cal_regs[TAS2563_CAL_N] = { |
| TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0, |
| TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM, |
| }; |
| |
| |
| struct tas2781_hda { |
| struct device *dev; |
| struct tasdevice_priv *priv; |
| struct snd_kcontrol *dsp_prog_ctl; |
| struct snd_kcontrol *dsp_conf_ctl; |
| struct snd_kcontrol *prof_ctl; |
| struct snd_kcontrol *snd_ctls[2]; |
| }; |
| |
| static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data) |
| { |
| struct tasdevice_priv *tas_priv = data; |
| struct acpi_resource_i2c_serialbus *sb; |
| |
| if (i2c_acpi_get_i2c_resource(ares, &sb)) { |
| if (tas_priv->ndev < TASDEVICE_MAX_CHANNELS && |
| sb->slave_address != tas_priv->global_addr) { |
| tas_priv->tasdevice[tas_priv->ndev].dev_addr = |
| (unsigned int)sb->slave_address; |
| tas_priv->ndev++; |
| } |
| } |
| return 1; |
| } |
| |
| static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid) |
| { |
| struct acpi_device *adev; |
| LIST_HEAD(resources); |
| int ret; |
| |
| adev = acpi_dev_get_first_match_dev(hid, NULL, -1); |
| if (!adev) { |
| dev_err(p->dev, |
| "Failed to find an ACPI device for %s\n", hid); |
| return -ENODEV; |
| } |
| |
| ret = acpi_dev_get_resources(adev, &resources, tas2781_get_i2c_res, p); |
| if (ret < 0) |
| goto err; |
| |
| acpi_dev_free_resource_list(&resources); |
| strscpy(p->dev_name, hid, sizeof(p->dev_name)); |
| acpi_dev_put(adev); |
| |
| return 0; |
| |
| err: |
| dev_err(p->dev, "read acpi error, ret: %d\n", ret); |
| acpi_dev_put(adev); |
| |
| return ret; |
| } |
| |
| static void tas2781_hda_playback_hook(struct device *dev, int action) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| |
| dev_dbg(tas_hda->dev, "%s: action = %d\n", __func__, action); |
| switch (action) { |
| case HDA_GEN_PCM_ACT_OPEN: |
| pm_runtime_get_sync(dev); |
| mutex_lock(&tas_hda->priv->codec_lock); |
| tasdevice_tuning_switch(tas_hda->priv, 0); |
| tas_hda->priv->playback_started = true; |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| break; |
| case HDA_GEN_PCM_ACT_CLOSE: |
| mutex_lock(&tas_hda->priv->codec_lock); |
| tasdevice_tuning_switch(tas_hda->priv, 1); |
| tas_hda->priv->playback_started = false; |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_put_autosuspend(dev); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1; |
| |
| return 0; |
| } |
| |
| static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id; |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d\n", |
| __func__, kcontrol->id.name, tas_priv->rcabin.profile_cfg_id); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| int nr_profile = ucontrol->value.integer.value[0]; |
| int max = tas_priv->rcabin.ncfgs - 1; |
| int val, ret = 0; |
| |
| val = clamp(nr_profile, 0, max); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d -> %d\n", |
| __func__, kcontrol->id.name, |
| tas_priv->rcabin.profile_cfg_id, val); |
| |
| if (tas_priv->rcabin.profile_cfg_id != val) { |
| tas_priv->rcabin.profile_cfg_id = val; |
| ret = 1; |
| } |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return ret; |
| } |
| |
| static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct tasdevice_fw *tas_fw = tas_priv->fmw; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = tas_fw->nr_programs - 1; |
| |
| return 0; |
| } |
| |
| static int tasdevice_info_config(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct tasdevice_fw *tas_fw = tas_priv->fmw; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = tas_fw->nr_configurations - 1; |
| |
| return 0; |
| } |
| |
| static int tasdevice_program_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ucontrol->value.integer.value[0] = tas_priv->cur_prog; |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d\n", |
| __func__, kcontrol->id.name, tas_priv->cur_prog); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tasdevice_program_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct tasdevice_fw *tas_fw = tas_priv->fmw; |
| int nr_program = ucontrol->value.integer.value[0]; |
| int max = tas_fw->nr_programs - 1; |
| int val, ret = 0; |
| |
| val = clamp(nr_program, 0, max); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d -> %d\n", |
| __func__, kcontrol->id.name, tas_priv->cur_prog, val); |
| |
| if (tas_priv->cur_prog != val) { |
| tas_priv->cur_prog = val; |
| ret = 1; |
| } |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return ret; |
| } |
| |
| static int tasdevice_config_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ucontrol->value.integer.value[0] = tas_priv->cur_conf; |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d\n", |
| __func__, kcontrol->id.name, tas_priv->cur_conf); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tasdevice_config_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct tasdevice_fw *tas_fw = tas_priv->fmw; |
| int nr_config = ucontrol->value.integer.value[0]; |
| int max = tas_fw->nr_configurations - 1; |
| int val, ret = 0; |
| |
| val = clamp(nr_config, 0, max); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d -> %d\n", |
| __func__, kcontrol->id.name, tas_priv->cur_conf, val); |
| |
| if (tas_priv->cur_conf != val) { |
| tas_priv->cur_conf = val; |
| ret = 1; |
| } |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return ret; |
| } |
| |
| static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct soc_mixer_control *mc = |
| (struct soc_mixer_control *)kcontrol->private_value; |
| int ret; |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ret = tasdevice_amp_getvol(tas_priv, ucontrol, mc); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %ld\n", |
| __func__, kcontrol->id.name, ucontrol->value.integer.value[0]); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return ret; |
| } |
| |
| static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| struct soc_mixer_control *mc = |
| (struct soc_mixer_control *)kcontrol->private_value; |
| int ret; |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: -> %ld\n", |
| __func__, kcontrol->id.name, ucontrol->value.integer.value[0]); |
| |
| /* The check of the given value is in tasdevice_amp_putvol. */ |
| ret = tasdevice_amp_putvol(tas_priv, ucontrol, mc); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return ret; |
| } |
| |
| static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status; |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d\n", |
| __func__, kcontrol->id.name, tas_priv->force_fwload_status); |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); |
| bool change, val = (bool)ucontrol->value.integer.value[0]; |
| |
| mutex_lock(&tas_priv->codec_lock); |
| |
| dev_dbg(tas_priv->dev, "%s: kcontrol %s: %d -> %d\n", |
| __func__, kcontrol->id.name, |
| tas_priv->force_fwload_status, val); |
| |
| if (tas_priv->force_fwload_status == val) |
| change = false; |
| else { |
| change = true; |
| tas_priv->force_fwload_status = val; |
| } |
| |
| mutex_unlock(&tas_priv->codec_lock); |
| |
| return change; |
| } |
| |
| static const struct snd_kcontrol_new tas2781_snd_controls[] = { |
| ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, |
| 1, 0, 20, 0, tas2781_amp_getvol, |
| tas2781_amp_putvol, amp_vol_tlv), |
| ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, |
| tas2781_force_fwload_get, tas2781_force_fwload_put), |
| }; |
| |
| static const struct snd_kcontrol_new tas2781_prof_ctrl = { |
| .name = "Speaker Profile Id", |
| .iface = SNDRV_CTL_ELEM_IFACE_CARD, |
| .info = tasdevice_info_profile, |
| .get = tasdevice_get_profile_id, |
| .put = tasdevice_set_profile_id, |
| }; |
| |
| static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl = { |
| .name = "Speaker Program Id", |
| .iface = SNDRV_CTL_ELEM_IFACE_CARD, |
| .info = tasdevice_info_programs, |
| .get = tasdevice_program_get, |
| .put = tasdevice_program_put, |
| }; |
| |
| static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl = { |
| .name = "Speaker Config Id", |
| .iface = SNDRV_CTL_ELEM_IFACE_CARD, |
| .info = tasdevice_info_config, |
| .get = tasdevice_config_get, |
| .put = tasdevice_config_put, |
| }; |
| |
| static void tas2563_apply_calib(struct tasdevice_priv *tas_priv) |
| { |
| int offset = 0; |
| __be32 data; |
| int ret; |
| |
| for (int i = 0; i < tas_priv->ndev; i++) { |
| for (int j = 0; j < TAS2563_CAL_N; ++j) { |
| data = cpu_to_be32( |
| *(uint32_t *)&tas_priv->cali_data.data[offset]); |
| ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j], |
| (unsigned char *)&data, TAS2563_CAL_DATA_SIZE); |
| if (ret) |
| dev_err(tas_priv->dev, |
| "Error writing calib regs\n"); |
| offset += TAS2563_CAL_DATA_SIZE; |
| } |
| } |
| } |
| |
| static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) |
| { |
| static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, |
| 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); |
| |
| static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = { |
| { L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" }, |
| { L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" }, |
| { L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" }, |
| { L"Power_4", L"R0_4", L"InvR0_4", L"R0_Low_4", L"TLim_4" }, |
| }; |
| |
| unsigned long max_size = TAS2563_CAL_DATA_SIZE; |
| unsigned int offset = 0; |
| efi_status_t status; |
| unsigned int attr; |
| |
| tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, |
| TAS2563_CAL_ARRAY_SIZE, GFP_KERNEL); |
| if (!tas_priv->cali_data.data) |
| return -ENOMEM; |
| |
| for (int i = 0; i < tas_priv->ndev; ++i) { |
| for (int j = 0; j < TAS2563_CAL_N; ++j) { |
| status = efi.get_variable(efi_vars[i][j], |
| &efi_guid, &attr, &max_size, |
| &tas_priv->cali_data.data[offset]); |
| if (status != EFI_SUCCESS || |
| max_size != TAS2563_CAL_DATA_SIZE) { |
| dev_warn(tas_priv->dev, |
| "Calibration data read failed %ld\n", status); |
| return -EINVAL; |
| } |
| offset += TAS2563_CAL_DATA_SIZE; |
| } |
| } |
| |
| tas_priv->cali_data.total_sz = offset; |
| tasdevice_apply_calibration(tas_priv); |
| |
| return 0; |
| } |
| |
| static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) |
| { |
| static const unsigned char page_array[CALIB_MAX] = { |
| 0x17, 0x18, 0x18, 0x13, 0x18, |
| }; |
| static const unsigned char rgno_array[CALIB_MAX] = { |
| 0x74, 0x0c, 0x14, 0x70, 0x7c, |
| }; |
| int offset = 0; |
| int i, j, rc; |
| __be32 data; |
| |
| for (i = 0; i < tas_priv->ndev; i++) { |
| for (j = 0; j < CALIB_MAX; j++) { |
| data = cpu_to_be32( |
| *(uint32_t *)&tas_priv->cali_data.data[offset]); |
| rc = tasdevice_dev_bulk_write(tas_priv, i, |
| TASDEVICE_REG(0, page_array[j], rgno_array[j]), |
| (unsigned char *)&data, 4); |
| if (rc < 0) |
| dev_err(tas_priv->dev, |
| "chn %d calib %d bulk_wr err = %d\n", |
| i, j, rc); |
| offset += 4; |
| } |
| } |
| } |
| |
| /* Update the calibration data, including speaker impedance, f0, etc, into algo. |
| * Calibrate data is done by manufacturer in the factory. These data are used |
| * by Algo for calculating the speaker temperature, speaker membrane excursion |
| * and f0 in real time during playback. |
| */ |
| static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) |
| { |
| efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, |
| 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); |
| static efi_char16_t efi_name[] = L"CALI_DATA"; |
| struct tm *tm = &tas_priv->tm; |
| unsigned int attr, crc; |
| unsigned int *tmp_val; |
| efi_status_t status; |
| |
| /* Lenovo devices */ |
| if (tas_priv->catlog_id == LENOVO) |
| efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09, |
| 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); |
| |
| tas_priv->cali_data.total_sz = 0; |
| /* Get real size of UEFI variable */ |
| status = efi.get_variable(efi_name, &efi_guid, &attr, |
| &tas_priv->cali_data.total_sz, tas_priv->cali_data.data); |
| if (status == EFI_BUFFER_TOO_SMALL) { |
| /* Allocate data buffer of data_size bytes */ |
| tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, |
| tas_priv->cali_data.total_sz, GFP_KERNEL); |
| if (!tas_priv->cali_data.data) |
| return -ENOMEM; |
| /* Get variable contents into buffer */ |
| status = efi.get_variable(efi_name, &efi_guid, &attr, |
| &tas_priv->cali_data.total_sz, |
| tas_priv->cali_data.data); |
| } |
| if (status != EFI_SUCCESS) |
| return -EINVAL; |
| |
| tmp_val = (unsigned int *)tas_priv->cali_data.data; |
| |
| crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0; |
| dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", |
| crc, tmp_val[21]); |
| |
| if (crc == tmp_val[21]) { |
| time64_to_tm(tmp_val[20], 0, tm); |
| dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| tasdevice_apply_calibration(tas_priv); |
| } else |
| tas_priv->cali_data.total_sz = 0; |
| |
| return 0; |
| } |
| |
| static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda) |
| { |
| struct hda_codec *codec = tas_hda->priv->codec; |
| |
| snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl); |
| snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl); |
| |
| for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--) |
| snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]); |
| |
| snd_ctl_remove(codec->card, tas_hda->prof_ctl); |
| } |
| |
| static void tasdev_fw_ready(const struct firmware *fmw, void *context) |
| { |
| struct tasdevice_priv *tas_priv = context; |
| struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev); |
| struct hda_codec *codec = tas_priv->codec; |
| int i, ret; |
| |
| pm_runtime_get_sync(tas_priv->dev); |
| mutex_lock(&tas_priv->codec_lock); |
| |
| ret = tasdevice_rca_parser(tas_priv, fmw); |
| if (ret) |
| goto out; |
| |
| tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl, tas_priv); |
| ret = snd_ctl_add(codec->card, tas_hda->prof_ctl); |
| if (ret) { |
| dev_err(tas_priv->dev, |
| "Failed to add KControl %s = %d\n", |
| tas2781_prof_ctrl.name, ret); |
| goto out; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(tas2781_snd_controls); i++) { |
| tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i], |
| tas_priv); |
| ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]); |
| if (ret) { |
| dev_err(tas_priv->dev, |
| "Failed to add KControl %s = %d\n", |
| tas2781_snd_controls[i].name, ret); |
| goto out; |
| } |
| } |
| |
| tasdevice_dsp_remove(tas_priv); |
| |
| tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; |
| scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%04X.bin", |
| codec->core.subsystem_id & 0xffff); |
| ret = tasdevice_dsp_parser(tas_priv); |
| if (ret) { |
| dev_err(tas_priv->dev, "dspfw load %s error\n", |
| tas_priv->coef_binaryname); |
| tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; |
| goto out; |
| } |
| |
| tas_hda->dsp_prog_ctl = snd_ctl_new1(&tas2781_dsp_prog_ctrl, |
| tas_priv); |
| ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl); |
| if (ret) { |
| dev_err(tas_priv->dev, |
| "Failed to add KControl %s = %d\n", |
| tas2781_dsp_prog_ctrl.name, ret); |
| goto out; |
| } |
| |
| tas_hda->dsp_conf_ctl = snd_ctl_new1(&tas2781_dsp_conf_ctrl, |
| tas_priv); |
| ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl); |
| if (ret) { |
| dev_err(tas_priv->dev, |
| "Failed to add KControl %s = %d\n", |
| tas2781_dsp_conf_ctrl.name, ret); |
| goto out; |
| } |
| |
| tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; |
| tasdevice_prmg_load(tas_priv, 0); |
| if (tas_priv->fmw->nr_programs > 0) |
| tas_priv->cur_prog = 0; |
| if (tas_priv->fmw->nr_configurations > 0) |
| tas_priv->cur_conf = 0; |
| |
| /* If calibrated data occurs error, dsp will still works with default |
| * calibrated data inside algo. |
| */ |
| tasdevice_save_calibration(tas_priv); |
| |
| tasdevice_tuning_switch(tas_hda->priv, 0); |
| tas_hda->priv->playback_started = true; |
| |
| out: |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| if (fmw) |
| release_firmware(fmw); |
| pm_runtime_mark_last_busy(tas_hda->dev); |
| pm_runtime_put_autosuspend(tas_hda->dev); |
| } |
| |
| static int tas2781_hda_bind(struct device *dev, struct device *master, |
| void *master_data) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| struct hda_component_parent *parent = master_data; |
| struct hda_component *comp; |
| struct hda_codec *codec; |
| unsigned int subid; |
| int ret; |
| |
| comp = hda_component_from_index(parent, tas_hda->priv->index); |
| if (!comp) |
| return -EINVAL; |
| |
| if (comp->dev) |
| return -EBUSY; |
| |
| codec = parent->codec; |
| subid = codec->core.subsystem_id >> 16; |
| |
| switch (subid) { |
| case 0x17aa: |
| tas_hda->priv->catlog_id = LENOVO; |
| break; |
| default: |
| tas_hda->priv->catlog_id = OTHERS; |
| break; |
| } |
| |
| pm_runtime_get_sync(dev); |
| |
| comp->dev = dev; |
| |
| strscpy(comp->name, dev_name(dev), sizeof(comp->name)); |
| |
| ret = tascodec_init(tas_hda->priv, codec, THIS_MODULE, tasdev_fw_ready); |
| if (!ret) |
| comp->playback_hook = tas2781_hda_playback_hook; |
| |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_put_autosuspend(dev); |
| |
| return ret; |
| } |
| |
| static void tas2781_hda_unbind(struct device *dev, |
| struct device *master, void *master_data) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| struct hda_component_parent *parent = master_data; |
| struct hda_component *comp; |
| |
| comp = hda_component_from_index(parent, tas_hda->priv->index); |
| if (comp && (comp->dev == dev)) { |
| comp->dev = NULL; |
| memset(comp->name, 0, sizeof(comp->name)); |
| comp->playback_hook = NULL; |
| } |
| |
| tas2781_hda_remove_controls(tas_hda); |
| |
| tasdevice_config_info_remove(tas_hda->priv); |
| tasdevice_dsp_remove(tas_hda->priv); |
| |
| tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; |
| } |
| |
| static const struct component_ops tas2781_hda_comp_ops = { |
| .bind = tas2781_hda_bind, |
| .unbind = tas2781_hda_unbind, |
| }; |
| |
| static void tas2781_hda_remove(struct device *dev) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| |
| component_del(tas_hda->dev, &tas2781_hda_comp_ops); |
| |
| pm_runtime_get_sync(tas_hda->dev); |
| pm_runtime_disable(tas_hda->dev); |
| |
| pm_runtime_put_noidle(tas_hda->dev); |
| |
| tasdevice_remove(tas_hda->priv); |
| } |
| |
| static int tas2781_hda_i2c_probe(struct i2c_client *clt) |
| { |
| struct tas2781_hda *tas_hda; |
| const char *device_name; |
| int ret; |
| |
| |
| tas_hda = devm_kzalloc(&clt->dev, sizeof(*tas_hda), GFP_KERNEL); |
| if (!tas_hda) |
| return -ENOMEM; |
| |
| dev_set_drvdata(&clt->dev, tas_hda); |
| tas_hda->dev = &clt->dev; |
| |
| tas_hda->priv = tasdevice_kzalloc(clt); |
| if (!tas_hda->priv) |
| return -ENOMEM; |
| |
| if (strstr(dev_name(&clt->dev), "TIAS2781")) { |
| device_name = "TIAS2781"; |
| tas_hda->priv->save_calibration = tas2781_save_calibration; |
| tas_hda->priv->apply_calibration = tas2781_apply_calib; |
| tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR; |
| } else if (strstr(dev_name(&clt->dev), "INT8866")) { |
| device_name = "INT8866"; |
| tas_hda->priv->save_calibration = tas2563_save_calibration; |
| tas_hda->priv->apply_calibration = tas2563_apply_calib; |
| tas_hda->priv->global_addr = TAS2563_GLOBAL_ADDR; |
| } else |
| return -ENODEV; |
| |
| tas_hda->priv->irq = clt->irq; |
| ret = tas2781_read_acpi(tas_hda->priv, device_name); |
| if (ret) |
| return dev_err_probe(tas_hda->dev, ret, |
| "Platform not supported\n"); |
| |
| ret = tasdevice_init(tas_hda->priv); |
| if (ret) |
| goto err; |
| |
| pm_runtime_set_autosuspend_delay(tas_hda->dev, 3000); |
| pm_runtime_use_autosuspend(tas_hda->dev); |
| pm_runtime_mark_last_busy(tas_hda->dev); |
| pm_runtime_set_active(tas_hda->dev); |
| pm_runtime_enable(tas_hda->dev); |
| |
| tasdevice_reset(tas_hda->priv); |
| |
| ret = component_add(tas_hda->dev, &tas2781_hda_comp_ops); |
| if (ret) { |
| dev_err(tas_hda->dev, "Register component failed: %d\n", ret); |
| pm_runtime_disable(tas_hda->dev); |
| } |
| |
| err: |
| if (ret) |
| tas2781_hda_remove(&clt->dev); |
| return ret; |
| } |
| |
| static void tas2781_hda_i2c_remove(struct i2c_client *clt) |
| { |
| tas2781_hda_remove(&clt->dev); |
| } |
| |
| static int tas2781_runtime_suspend(struct device *dev) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| |
| dev_dbg(tas_hda->dev, "Runtime Suspend\n"); |
| |
| mutex_lock(&tas_hda->priv->codec_lock); |
| |
| /* The driver powers up the amplifiers at module load time. |
| * Stop the playback if it's unused. |
| */ |
| if (tas_hda->priv->playback_started) { |
| tasdevice_tuning_switch(tas_hda->priv, 1); |
| tas_hda->priv->playback_started = false; |
| } |
| |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tas2781_runtime_resume(struct device *dev) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| |
| dev_dbg(tas_hda->dev, "Runtime Resume\n"); |
| |
| mutex_lock(&tas_hda->priv->codec_lock); |
| |
| tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); |
| |
| /* If calibrated data occurs error, dsp will still works with default |
| * calibrated data inside algo. |
| */ |
| tasdevice_apply_calibration(tas_hda->priv); |
| |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static int tas2781_system_suspend(struct device *dev) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| |
| dev_dbg(tas_hda->priv->dev, "System Suspend\n"); |
| |
| mutex_lock(&tas_hda->priv->codec_lock); |
| |
| /* Shutdown chip before system suspend */ |
| if (tas_hda->priv->playback_started) |
| tasdevice_tuning_switch(tas_hda->priv, 1); |
| |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| |
| /* |
| * Reset GPIO may be shared, so cannot reset here. |
| * However beyond this point, amps may be powered down. |
| */ |
| return 0; |
| } |
| |
| static int tas2781_system_resume(struct device *dev) |
| { |
| struct tas2781_hda *tas_hda = dev_get_drvdata(dev); |
| int i; |
| |
| dev_dbg(tas_hda->priv->dev, "System Resume\n"); |
| |
| mutex_lock(&tas_hda->priv->codec_lock); |
| |
| for (i = 0; i < tas_hda->priv->ndev; i++) { |
| tas_hda->priv->tasdevice[i].cur_book = -1; |
| tas_hda->priv->tasdevice[i].cur_prog = -1; |
| tas_hda->priv->tasdevice[i].cur_conf = -1; |
| } |
| tasdevice_reset(tas_hda->priv); |
| tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); |
| |
| /* If calibrated data occurs error, dsp will still work with default |
| * calibrated data inside algo. |
| */ |
| tasdevice_apply_calibration(tas_hda->priv); |
| |
| if (tas_hda->priv->playback_started) |
| tasdevice_tuning_switch(tas_hda->priv, 0); |
| |
| mutex_unlock(&tas_hda->priv->codec_lock); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops tas2781_hda_pm_ops = { |
| RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL) |
| SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume) |
| }; |
| |
| static const struct i2c_device_id tas2781_hda_i2c_id[] = { |
| { "tas2781-hda" }, |
| {} |
| }; |
| |
| static const struct acpi_device_id tas2781_acpi_hda_match[] = { |
| {"TIAS2781", 0 }, |
| {"INT8866", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); |
| |
| static struct i2c_driver tas2781_hda_i2c_driver = { |
| .driver = { |
| .name = "tas2781-hda", |
| .acpi_match_table = tas2781_acpi_hda_match, |
| .pm = &tas2781_hda_pm_ops, |
| }, |
| .id_table = tas2781_hda_i2c_id, |
| .probe = tas2781_hda_i2c_probe, |
| .remove = tas2781_hda_i2c_remove, |
| }; |
| module_i2c_driver(tas2781_hda_i2c_driver); |
| |
| MODULE_DESCRIPTION("TAS2781 HDA Driver"); |
| MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding@ti.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB); |