| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for the ADB controller in the Mac I/O (Hydra) chip. |
| */ |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/pgtable.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/adb.h> |
| |
| #include <asm/io.h> |
| #include <asm/hydra.h> |
| #include <asm/irq.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| |
| struct preg { |
| unsigned char r; |
| char pad[15]; |
| }; |
| |
| struct adb_regs { |
| struct preg intr; |
| struct preg data[9]; |
| struct preg intr_enb; |
| struct preg dcount; |
| struct preg error; |
| struct preg ctrl; |
| struct preg autopoll; |
| struct preg active_hi; |
| struct preg active_lo; |
| struct preg test; |
| }; |
| |
| /* Bits in intr and intr_enb registers */ |
| #define DFB 1 /* data from bus */ |
| #define TAG 2 /* transfer access grant */ |
| |
| /* Bits in dcount register */ |
| #define HMB 0x0f /* how many bytes */ |
| #define APD 0x10 /* auto-poll data */ |
| |
| /* Bits in error register */ |
| #define NRE 1 /* no response error */ |
| #define DLE 2 /* data lost error */ |
| |
| /* Bits in ctrl register */ |
| #define TAR 1 /* transfer access request */ |
| #define DTB 2 /* data to bus */ |
| #define CRE 4 /* command response expected */ |
| #define ADB_RST 8 /* ADB reset */ |
| |
| /* Bits in autopoll register */ |
| #define APE 1 /* autopoll enable */ |
| |
| static volatile struct adb_regs __iomem *adb; |
| static struct adb_request *current_req, *last_req; |
| static DEFINE_SPINLOCK(macio_lock); |
| |
| static int macio_probe(void); |
| static int macio_init(void); |
| static irqreturn_t macio_adb_interrupt(int irq, void *arg); |
| static int macio_send_request(struct adb_request *req, int sync); |
| static int macio_adb_autopoll(int devs); |
| static void macio_adb_poll(void); |
| static int macio_adb_reset_bus(void); |
| |
| struct adb_driver macio_adb_driver = { |
| .name = "MACIO", |
| .probe = macio_probe, |
| .init = macio_init, |
| .send_request = macio_send_request, |
| .autopoll = macio_adb_autopoll, |
| .poll = macio_adb_poll, |
| .reset_bus = macio_adb_reset_bus, |
| }; |
| |
| int macio_probe(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_compatible_node(NULL, "adb", "chrp,adb0"); |
| if (np) { |
| of_node_put(np); |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| int macio_init(void) |
| { |
| struct device_node *adbs; |
| struct resource r; |
| unsigned int irq; |
| |
| adbs = of_find_compatible_node(NULL, "adb", "chrp,adb0"); |
| if (adbs == 0) |
| return -ENXIO; |
| |
| if (of_address_to_resource(adbs, 0, &r)) { |
| of_node_put(adbs); |
| return -ENXIO; |
| } |
| adb = ioremap(r.start, sizeof(struct adb_regs)); |
| |
| out_8(&adb->ctrl.r, 0); |
| out_8(&adb->intr.r, 0); |
| out_8(&adb->error.r, 0); |
| out_8(&adb->active_hi.r, 0xff); /* for now, set all devices active */ |
| out_8(&adb->active_lo.r, 0xff); |
| out_8(&adb->autopoll.r, APE); |
| |
| irq = irq_of_parse_and_map(adbs, 0); |
| of_node_put(adbs); |
| if (request_irq(irq, macio_adb_interrupt, 0, "ADB", (void *)0)) { |
| printk(KERN_ERR "ADB: can't get irq %d\n", irq); |
| return -EAGAIN; |
| } |
| out_8(&adb->intr_enb.r, DFB | TAG); |
| |
| printk("adb: mac-io driver 1.0 for unified ADB\n"); |
| |
| return 0; |
| } |
| |
| static int macio_adb_autopoll(int devs) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&macio_lock, flags); |
| out_8(&adb->active_hi.r, devs >> 8); |
| out_8(&adb->active_lo.r, devs); |
| out_8(&adb->autopoll.r, devs? APE: 0); |
| spin_unlock_irqrestore(&macio_lock, flags); |
| return 0; |
| } |
| |
| static int macio_adb_reset_bus(void) |
| { |
| unsigned long flags; |
| int timeout = 1000000; |
| |
| /* Hrm... we may want to not lock interrupts for so |
| * long ... oh well, who uses that chip anyway ? :) |
| * That function will be seldom used during boot |
| * on rare machines, so... |
| */ |
| spin_lock_irqsave(&macio_lock, flags); |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | ADB_RST); |
| while ((in_8(&adb->ctrl.r) & ADB_RST) != 0) { |
| if (--timeout == 0) { |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) & ~ADB_RST); |
| spin_unlock_irqrestore(&macio_lock, flags); |
| return -1; |
| } |
| } |
| spin_unlock_irqrestore(&macio_lock, flags); |
| return 0; |
| } |
| |
| /* Send an ADB command */ |
| static int macio_send_request(struct adb_request *req, int sync) |
| { |
| unsigned long flags; |
| int i; |
| |
| if (req->data[0] != ADB_PACKET) |
| return -EINVAL; |
| |
| for (i = 0; i < req->nbytes - 1; ++i) |
| req->data[i] = req->data[i+1]; |
| --req->nbytes; |
| |
| req->next = NULL; |
| req->sent = 0; |
| req->complete = 0; |
| req->reply_len = 0; |
| |
| spin_lock_irqsave(&macio_lock, flags); |
| if (current_req != 0) { |
| last_req->next = req; |
| last_req = req; |
| } else { |
| current_req = last_req = req; |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); |
| } |
| spin_unlock_irqrestore(&macio_lock, flags); |
| |
| if (sync) { |
| while (!req->complete) |
| macio_adb_poll(); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t macio_adb_interrupt(int irq, void *arg) |
| { |
| int i, n, err; |
| struct adb_request *req = NULL; |
| unsigned char ibuf[16]; |
| int ibuf_len = 0; |
| int complete = 0; |
| int autopoll = 0; |
| int handled = 0; |
| |
| spin_lock(&macio_lock); |
| if (in_8(&adb->intr.r) & TAG) { |
| handled = 1; |
| if ((req = current_req) != 0) { |
| /* put the current request in */ |
| for (i = 0; i < req->nbytes; ++i) |
| out_8(&adb->data[i].r, req->data[i]); |
| out_8(&adb->dcount.r, req->nbytes & HMB); |
| req->sent = 1; |
| if (req->reply_expected) { |
| out_8(&adb->ctrl.r, DTB + CRE); |
| } else { |
| out_8(&adb->ctrl.r, DTB); |
| current_req = req->next; |
| complete = 1; |
| if (current_req) |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); |
| } |
| } |
| out_8(&adb->intr.r, 0); |
| } |
| |
| if (in_8(&adb->intr.r) & DFB) { |
| handled = 1; |
| err = in_8(&adb->error.r); |
| if (current_req && current_req->sent) { |
| /* this is the response to a command */ |
| req = current_req; |
| if (err == 0) { |
| req->reply_len = in_8(&adb->dcount.r) & HMB; |
| for (i = 0; i < req->reply_len; ++i) |
| req->reply[i] = in_8(&adb->data[i].r); |
| } |
| current_req = req->next; |
| complete = 1; |
| if (current_req) |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); |
| } else if (err == 0) { |
| /* autopoll data */ |
| n = in_8(&adb->dcount.r) & HMB; |
| for (i = 0; i < n; ++i) |
| ibuf[i] = in_8(&adb->data[i].r); |
| ibuf_len = n; |
| autopoll = (in_8(&adb->dcount.r) & APD) != 0; |
| } |
| out_8(&adb->error.r, 0); |
| out_8(&adb->intr.r, 0); |
| } |
| spin_unlock(&macio_lock); |
| if (complete && req) { |
| void (*done)(struct adb_request *) = req->done; |
| mb(); |
| req->complete = 1; |
| /* Here, we assume that if the request has a done member, the |
| * struct request will survive to setting req->complete to 1 |
| */ |
| if (done) |
| (*done)(req); |
| } |
| if (ibuf_len) |
| adb_input(ibuf, ibuf_len, autopoll); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static void macio_adb_poll(void) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| if (in_8(&adb->intr.r) != 0) |
| macio_adb_interrupt(0, NULL); |
| local_irq_restore(flags); |
| } |