| // SPDX-License-Identifier: GPL-2.0-only |
| /*====================================================================== |
| |
| Device driver for the PCMCIA control functionality of PXA2xx |
| microprocessors. |
| |
| |
| (c) Ian Molton (spyro@f2s.com) 2003 |
| (c) Stefan Eletzhofer (stefan.eletzhofer@inquant.de) 2003,4 |
| |
| derived from sa11xx_base.c |
| |
| Portions created by John G. Dorsey are |
| Copyright (C) 1999 John G. Dorsey. |
| |
| ======================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| #include <linux/soc/pxa/cpu.h> |
| #include <linux/soc/pxa/smemc.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/mach-types.h> |
| |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cistpl.h> |
| |
| #include "soc_common.h" |
| #include "pxa2xx_base.h" |
| |
| /* |
| * Personal Computer Memory Card International Association (PCMCIA) sockets |
| */ |
| |
| #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ |
| #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ |
| #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ |
| #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ |
| #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ |
| |
| #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ |
| #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ |
| #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ |
| #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ |
| |
| #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ |
| #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ |
| #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ |
| #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ |
| |
| #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ |
| (0x20000000 + (Nb) * PCMCIASp) |
| #define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */ |
| #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ |
| (_PCMCIA(Nb) + 2 * PCMCIAPrtSp) |
| #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ |
| (_PCMCIA(Nb) + 3 * PCMCIAPrtSp) |
| |
| #define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */ |
| #define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */ |
| #define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */ |
| #define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */ |
| |
| #define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */ |
| #define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */ |
| #define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */ |
| #define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */ |
| |
| |
| #define MCXX_SETUP_MASK (0x7f) |
| #define MCXX_ASST_MASK (0x1f) |
| #define MCXX_HOLD_MASK (0x3f) |
| #define MCXX_SETUP_SHIFT (0) |
| #define MCXX_ASST_SHIFT (7) |
| #define MCXX_HOLD_SHIFT (14) |
| |
| static inline u_int pxa2xx_mcxx_hold(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 300000) + ((code % 300000) ? 1 : 0) - 1; |
| } |
| |
| static inline u_int pxa2xx_mcxx_asst(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 300000) + ((code % 300000) ? 1 : 0) + 1; |
| } |
| |
| static inline u_int pxa2xx_mcxx_setup(u_int pcmcia_cycle_ns, |
| u_int mem_clk_10khz) |
| { |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; |
| return (code / 100000) + ((code % 100000) ? 1 : 0) - 1; |
| } |
| |
| /* This function returns the (approximate) command assertion period, in |
| * nanoseconds, for a given CPU clock frequency and MCXX_ASST value: |
| */ |
| static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz, |
| u_int pcmcia_mcxx_asst) |
| { |
| return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz); |
| } |
| |
| static uint32_t pxa2xx_pcmcia_mcmem(int sock, int speed, int clock) |
| { |
| uint32_t val; |
| |
| val = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| return val; |
| } |
| |
| static int pxa2xx_pcmcia_mcio(int sock, int speed, int clock) |
| { |
| uint32_t val; |
| |
| val = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| |
| return val; |
| } |
| |
| static int pxa2xx_pcmcia_mcatt(int sock, int speed, int clock) |
| { |
| uint32_t val; |
| |
| val = ((pxa2xx_mcxx_setup(speed, clock) |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) |
| | ((pxa2xx_mcxx_asst(speed, clock) |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) |
| | ((pxa2xx_mcxx_hold(speed, clock) |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); |
| |
| |
| return val; |
| } |
| |
| static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt) |
| { |
| unsigned long clk = clk_get_rate(skt->clk) / 10000; |
| struct soc_pcmcia_timing timing; |
| int sock = skt->nr; |
| |
| soc_common_pcmcia_get_timing(skt, &timing); |
| |
| pxa_smemc_set_pcmcia_timing(sock, |
| pxa2xx_pcmcia_mcmem(sock, timing.mem, clk), |
| pxa2xx_pcmcia_mcatt(sock, timing.attr, clk), |
| pxa2xx_pcmcia_mcio(sock, timing.io, clk)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CPU_FREQ |
| |
| static int |
| pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, |
| unsigned long val, |
| struct cpufreq_freqs *freqs) |
| { |
| switch (val) { |
| case CPUFREQ_PRECHANGE: |
| if (freqs->new > freqs->old) { |
| debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, " |
| "pre-updating\n", |
| freqs->new / 1000, (freqs->new / 100) % 10, |
| freqs->old / 1000, (freqs->old / 100) % 10); |
| pxa2xx_pcmcia_set_timing(skt); |
| } |
| break; |
| |
| case CPUFREQ_POSTCHANGE: |
| if (freqs->new < freqs->old) { |
| debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, " |
| "post-updating\n", |
| freqs->new / 1000, (freqs->new / 100) % 10, |
| freqs->old / 1000, (freqs->old / 100) % 10); |
| pxa2xx_pcmcia_set_timing(skt); |
| } |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops) |
| { |
| int nr = 1; |
| |
| if ((ops->first + ops->nr) > 1 || |
| machine_is_viper() || machine_is_arcom_zeus()) |
| nr = 2; |
| |
| pxa_smemc_set_pcmcia_socket(nr); |
| } |
| EXPORT_SYMBOL(pxa2xx_configure_sockets); |
| |
| static const char *skt_names[] = { |
| "PCMCIA socket 0", |
| "PCMCIA socket 1", |
| }; |
| |
| #define SKT_DEV_INFO_SIZE(n) \ |
| (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) |
| |
| int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt) |
| { |
| skt->res_skt.start = _PCMCIA(skt->nr); |
| skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; |
| skt->res_skt.name = skt_names[skt->nr]; |
| skt->res_skt.flags = IORESOURCE_MEM; |
| |
| skt->res_io.start = _PCMCIAIO(skt->nr); |
| skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; |
| skt->res_io.name = "io"; |
| skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| |
| skt->res_mem.start = _PCMCIAMem(skt->nr); |
| skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; |
| skt->res_mem.name = "memory"; |
| skt->res_mem.flags = IORESOURCE_MEM; |
| |
| skt->res_attr.start = _PCMCIAAttr(skt->nr); |
| skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; |
| skt->res_attr.name = "attribute"; |
| skt->res_attr.flags = IORESOURCE_MEM; |
| |
| return soc_pcmcia_add_one(skt); |
| } |
| EXPORT_SYMBOL(pxa2xx_drv_pcmcia_add_one); |
| |
| void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops) |
| { |
| /* Provide our PXA2xx specific timing routines. */ |
| ops->set_timing = pxa2xx_pcmcia_set_timing; |
| #ifdef CONFIG_CPU_FREQ |
| ops->frequency_change = pxa2xx_pcmcia_frequency_change; |
| #endif |
| } |
| EXPORT_SYMBOL(pxa2xx_drv_pcmcia_ops); |
| |
| static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) |
| { |
| int i, ret = 0; |
| struct pcmcia_low_level *ops; |
| struct skt_dev_info *sinfo; |
| struct soc_pcmcia_socket *skt; |
| struct clk *clk; |
| |
| ops = (struct pcmcia_low_level *)dev->dev.platform_data; |
| if (!ops) { |
| ret = -ENODEV; |
| goto err0; |
| } |
| |
| if (cpu_is_pxa320() && ops->nr > 1) { |
| dev_err(&dev->dev, "pxa320 supports only one pcmcia slot"); |
| ret = -EINVAL; |
| goto err0; |
| } |
| |
| clk = devm_clk_get(&dev->dev, NULL); |
| if (IS_ERR(clk)) |
| return -ENODEV; |
| |
| pxa2xx_drv_pcmcia_ops(ops); |
| |
| sinfo = devm_kzalloc(&dev->dev, SKT_DEV_INFO_SIZE(ops->nr), |
| GFP_KERNEL); |
| if (!sinfo) |
| return -ENOMEM; |
| |
| sinfo->nskt = ops->nr; |
| |
| /* Initialize processor specific parameters */ |
| for (i = 0; i < ops->nr; i++) { |
| skt = &sinfo->skt[i]; |
| |
| skt->nr = ops->first + i; |
| skt->clk = clk; |
| soc_pcmcia_init_one(skt, ops, &dev->dev); |
| |
| ret = pxa2xx_drv_pcmcia_add_one(skt); |
| if (ret) |
| goto err1; |
| } |
| |
| pxa2xx_configure_sockets(&dev->dev, ops); |
| dev_set_drvdata(&dev->dev, sinfo); |
| |
| return 0; |
| |
| err1: |
| while (--i >= 0) |
| soc_pcmcia_remove_one(&sinfo->skt[i]); |
| |
| err0: |
| return ret; |
| } |
| |
| static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) |
| { |
| struct skt_dev_info *sinfo = platform_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < sinfo->nskt; i++) |
| soc_pcmcia_remove_one(&sinfo->skt[i]); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_drv_pcmcia_resume(struct device *dev) |
| { |
| struct pcmcia_low_level *ops = (struct pcmcia_low_level *)dev->platform_data; |
| |
| pxa2xx_configure_sockets(dev, ops); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = { |
| .resume = pxa2xx_drv_pcmcia_resume, |
| }; |
| |
| static struct platform_driver pxa2xx_pcmcia_driver = { |
| .probe = pxa2xx_drv_pcmcia_probe, |
| .remove = pxa2xx_drv_pcmcia_remove, |
| .driver = { |
| .name = "pxa2xx-pcmcia", |
| .pm = &pxa2xx_drv_pcmcia_pm_ops, |
| }, |
| }; |
| |
| static int __init pxa2xx_pcmcia_init(void) |
| { |
| return platform_driver_register(&pxa2xx_pcmcia_driver); |
| } |
| |
| static void __exit pxa2xx_pcmcia_exit(void) |
| { |
| platform_driver_unregister(&pxa2xx_pcmcia_driver); |
| } |
| |
| fs_initcall(pxa2xx_pcmcia_init); |
| module_exit(pxa2xx_pcmcia_exit); |
| |
| MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>"); |
| MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pxa2xx-pcmcia"); |