drivers/regulator/max597x-regulator.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Device driver for regulators in MAX5970 and MAX5978 IC
  *
  * Copyright (c) 2022 9elements GmbH
  *
  * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
  */

 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/platform_device.h>

 #include <linux/mfd/max597x.h>

 struct max597x_regulator {
 	int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
 	struct regmap *regmap;
 };

 enum max597x_regulator_id {
 	MAX597X_SW0,
 	MAX597X_SW1,
 };

 static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
 {
 	int ret, reg;

 	/* Status1 register contains the soft strap values sampled at POR */
 	ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS1, &reg);
 	if (ret)
 		return ret;

 	/* Check soft straps match requested mode */
 	if (severity == REGULATOR_SEVERITY_PROT) {
 		if (STATUS1_PROT(reg) != STATUS1_PROT_SHUTDOWN)
 			return -EOPNOTSUPP;

 		return 0;
 	}
 	if (STATUS1_PROT(reg) == STATUS1_PROT_SHUTDOWN)
 		return -EOPNOTSUPP;

 	return 0;
 }

 static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
 			  bool enable, bool overvoltage)
 {
 	int off_h, off_l, reg, ret;
 	struct max597x_regulator *data = rdev_get_drvdata(rdev);
 	int channel = rdev_get_id(rdev);

 	if (overvoltage) {
 		if (severity == REGULATOR_SEVERITY_WARN) {
 			off_h = MAX5970_REG_CH_OV_WARN_H(channel);
 			off_l = MAX5970_REG_CH_OV_WARN_L(channel);
 		} else {
 			off_h = MAX5970_REG_CH_OV_CRIT_H(channel);
 			off_l = MAX5970_REG_CH_OV_CRIT_L(channel);
 		}
 	} else {
 		if (severity == REGULATOR_SEVERITY_WARN) {
 			off_h = MAX5970_REG_CH_UV_WARN_H(channel);
 			off_l = MAX5970_REG_CH_UV_WARN_L(channel);
 		} else {
 			off_h = MAX5970_REG_CH_UV_CRIT_H(channel);
 			off_l = MAX5970_REG_CH_UV_CRIT_L(channel);
 		}
 	}

 	if (enable)
 		/* reg = ADC_MASK * (lim_uV / 1000000) / (data->mon_rng / 1000000) */
 		reg = ADC_MASK * lim_uV / data->mon_rng;
 	else
 		reg = 0;

 	ret = regmap_write(rdev->regmap, off_h, MAX5970_VAL2REG_H(reg));
 	if (ret)
 		return ret;

 	ret = regmap_write(rdev->regmap, off_l, MAX5970_VAL2REG_L(reg));
 	if (ret)
 		return ret;

 	return 0;
 }

 static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;

 	/*
 	 * MAX5970 has enable control as a special value in limit reg. Can't
 	 * set limit but keep feature disabled or enable W/O given limit.
 	 */
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;

 	ret = max597x_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;

 	return max597x_set_vp(rdev, lim_uV, severity, enable, false);
 }

 static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;

 	/*
 	 * MAX5970 has enable control as a special value in limit reg. Can't
 	 * set limit but keep feature disabled or enable W/O given limit.
 	 */
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;

 	ret = max597x_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;

 	return max597x_set_vp(rdev, lim_uV, severity, enable, true);
 }

 static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
 			   int severity, bool enable)
 {
 	int ret, val, reg;
 	unsigned int vthst, vthfst;

 	struct max597x_regulator *data = rdev_get_drvdata(rdev);
 	int rdev_id = rdev_get_id(rdev);
 	/*
 	 * MAX5970 doesn't has enable control for ocp.
 	 * If limit is specified but enable is not set then hold the value in
 	 * variable & later use it when ocp needs to be enabled.
 	 */
 	if (lim_uA != 0 && lim_uA != data->lim_uA)
 		data->lim_uA = lim_uA;

 	if (severity != REGULATOR_SEVERITY_PROT)
 		return -EINVAL;

 	if (enable) {

 		/* Calc Vtrip threshold in uV. */
 		vthst =
 		    div_u64(mul_u32_u32(data->shunt_micro_ohms, data->lim_uA),
 			    1000000);

 		/*
 		 * As recommended in datasheed, add 20% margin to avoid
 		 * spurious event & passive component tolerance.
 		 */
 		vthst = div_u64(mul_u32_u32(vthst, 120), 100);

 		/* Calc fast Vtrip threshold in uV */
 		vthfst = vthst * (MAX5970_FAST2SLOW_RATIO / 100);

 		if (vthfst > data->irng) {
 			dev_err(&rdev->dev, "Current limit out of range\n");
 			return -EINVAL;
 		}
 		/* Fast trip threshold to be programmed */
 		val = div_u64(mul_u32_u32(0xFF, vthfst), data->irng);
 	} else
 		/*
 		 * Since there is no option to disable ocp, set limit to max
 		 * value
 		 */
 		val = 0xFF;

 	reg = MAX5970_REG_DAC_FAST(rdev_id);
 	ret = regmap_write(rdev->regmap, reg, val);

 	return ret;
 }

 static int max597x_get_status(struct regulator_dev *rdev)
 {
 	int val, ret;

 	ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS3, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;

 	if (val & MAX5970_STATUS3_ALERT)
 		return REGULATOR_STATUS_ERROR;

 	ret = regulator_is_enabled_regmap(rdev);
 	if (ret < 0)
 		return ret;

 	if (ret)
 		return REGULATOR_STATUS_ON;

 	return REGULATOR_STATUS_OFF;
 }

 static const struct regulator_ops max597x_switch_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.get_status = max597x_get_status,
 	.set_over_voltage_protection = max597x_set_ovp,
 	.set_under_voltage_protection = max597x_set_uvp,
 	.set_over_current_protection = max597x_set_ocp,
 };

 static int max597x_dt_parse(struct device_node *np,
 			    const struct regulator_desc *desc,
 			    struct regulator_config *cfg)
 {
 	struct max597x_regulator *data = cfg->driver_data;
 	int ret = 0;

 	ret =
 	    of_property_read_u32(np, "shunt-resistor-micro-ohms",
 				 &data->shunt_micro_ohms);
 	if (ret < 0)
 		dev_err(cfg->dev,
 			"property 'shunt-resistor-micro-ohms' not found, err %d\n",
 			ret);
 	return ret;

 }

 #define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) {     \
 	.name            = #_ID,                         \
 	.of_match        = of_match_ptr(#_ID),           \
 	.ops             = &max597x_switch_ops,          \
 	.regulators_node = of_match_ptr("regulators"),   \
 	.type            = REGULATOR_VOLTAGE,            \
 	.id              = MAX597X_##_ID,                \
 	.owner           = THIS_MODULE,                  \
 	.supply_name     = _supply,                      \
 	.enable_reg      = _ereg,                        \
 	.enable_mask     = CHXEN((_chan)),               \
 	.of_parse_cb	 = max597x_dt_parse,		 \
 }

 static const struct regulator_desc regulators[] = {
 	MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
 	MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
 };

 static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
 				     unsigned int *val)
 {
 	int ret;

 	ret = regmap_read(map, reg, val);
 	if (ret)
 		return ret;

 	if (*val)
 		return regmap_write(map, reg, *val);

 	return 0;
 }

 static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 			       unsigned long *dev_mask)
 {
 	struct regulator_err_state *stat;
 	struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
 	int val, ret, i;

 	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;

 	*dev_mask = 0;
 	for (i = 0; i < d->num_switches; i++) {
 		stat = &rid->states[i];
 		stat->notifs = 0;
 		stat->errors = 0;
 	}

 	for (i = 0; i < d->num_switches; i++) {
 		stat = &rid->states[i];

 		if (val & UV_STATUS_CRIT(i)) {
 			*dev_mask |= 1 << i;
 			stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE;
 			stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE;
 		} else if (val & UV_STATUS_WARN(i)) {
 			*dev_mask |= 1 << i;
 			stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
 			stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
 		}
 	}

 	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;

 	for (i = 0; i < d->num_switches; i++) {
 		stat = &rid->states[i];

 		if (val & OV_STATUS_CRIT(i)) {
 			*dev_mask |= 1 << i;
 			stat->notifs |= REGULATOR_EVENT_REGULATION_OUT;
 			stat->errors |= REGULATOR_ERROR_REGULATION_OUT;
 		} else if (val & OV_STATUS_WARN(i)) {
 			*dev_mask |= 1 << i;
 			stat->notifs |= REGULATOR_EVENT_OVER_VOLTAGE_WARN;
 			stat->errors |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
 		}
 	}

 	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;

 	for (i = 0; i < d->num_switches; i++) {
 		stat = &rid->states[i];

 		if (val & OC_STATUS_WARN(i)) {
 			*dev_mask |= 1 << i;
 			stat->notifs |= REGULATOR_EVENT_OVER_CURRENT_WARN;
 			stat->errors |= REGULATOR_ERROR_OVER_CURRENT_WARN;
 		}
 	}

 	ret = regmap_read(d->regmap, MAX5970_REG_STATUS0, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;

 	for (i = 0; i < d->num_switches; i++) {
 		stat = &rid->states[i];

 		if ((val & MAX5970_CB_IFAULTF(i))
 		    || (val & MAX5970_CB_IFAULTS(i))) {
 			*dev_mask |= 1 << i;
 			stat->notifs |=
 			    REGULATOR_EVENT_OVER_CURRENT |
 			    REGULATOR_EVENT_DISABLE;
 			stat->errors |=
 			    REGULATOR_ERROR_OVER_CURRENT | REGULATOR_ERROR_FAIL;

 			/* Clear the sub-IRQ status */
 			regulator_disable_regmap(stat->rdev);
 		}
 	}
 	return 0;
 }

 static const struct regmap_config max597x_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = MAX_REGISTERS,
 };

 static int max597x_adc_range(struct regmap *regmap, const int ch,
 			     u32 *irng, u32 *mon_rng)
 {
 	unsigned int reg;
 	int ret;

 	/* Decode current ADC range */
 	ret = regmap_read(regmap, MAX5970_REG_STATUS2, &reg);
 	if (ret)
 		return ret;
 	switch (MAX5970_IRNG(reg, ch)) {
 	case 0:
 		*irng = 100000;	/* 100 mV */
 		break;
 	case 1:
 		*irng = 50000;	/* 50 mV */
 		break;
 	case 2:
 		*irng = 25000;	/* 25 mV */
 		break;
 	default:
 		return -EINVAL;
 	}

 	/* Decode current voltage monitor range */
 	ret = regmap_read(regmap, MAX5970_REG_MON_RANGE, &reg);
 	if (ret)
 		return ret;

 	*mon_rng = MAX5970_MON_MAX_RANGE_UV >> MAX5970_MON(reg, ch);

 	return 0;
 }

 static int max597x_setup_irq(struct device *dev,
 			     int irq,
 			     struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
 			     int num_switches, struct max597x_regulator *data)
 {
 	struct regulator_irq_desc max597x_notif = {
 		.name = "max597x-irq",
 		.map_event = max597x_irq_handler,
 		.data = data,
 	};
 	int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
 	    REGULATOR_ERROR_UNDER_VOLTAGE_WARN |
 	    REGULATOR_ERROR_OVER_VOLTAGE_WARN |
 	    REGULATOR_ERROR_REGULATION_OUT |
 	    REGULATOR_ERROR_OVER_CURRENT |
 	    REGULATOR_ERROR_OVER_CURRENT_WARN | REGULATOR_ERROR_FAIL;
 	void *irq_helper;

 	/* Register notifiers - can fail if IRQ is not given */
 	irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
 					       irq, 0, errs, NULL,
 					       &rdevs[0], num_switches);
 	if (IS_ERR(irq_helper)) {
 		if (PTR_ERR(irq_helper) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;

 		dev_warn(dev, "IRQ disabled %pe\n", irq_helper);
 	}

 	return 0;
 }

 static int max597x_regulator_probe(struct platform_device *pdev)
 {


 	struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
 	struct max597x_regulator *data;

 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
 	int num_switches = max597x->num_switches;
 	int ret, i;

 	for (i = 0; i < num_switches; i++) {
 		data =
 		    devm_kzalloc(max597x->dev, sizeof(struct max597x_regulator),
 				 GFP_KERNEL);
 		if (!data)
 			return -ENOMEM;

 		data->num_switches = num_switches;
 		data->regmap = max597x->regmap;

 		ret = max597x_adc_range(data->regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
 		if (ret < 0)
 			return ret;

 		data->irng = max597x->irng[i];
 		data->mon_rng = max597x->mon_rng[i];

 		config.dev = max597x->dev;
 		config.driver_data = (void *)data;
 		config.regmap = data->regmap;
 		rdev = devm_regulator_register(max597x->dev,
 					       &regulators[i], &config);
 		if (IS_ERR(rdev)) {
 			dev_err(max597x->dev, "failed to register regulator %s\n",
 				regulators[i].name);
 			return PTR_ERR(rdev);
 		}
 		rdevs[i] = rdev;
 		max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
 	}

 	if (max597x->irq) {
 		ret =
 		    max597x_setup_irq(max597x->dev, max597x->irq, rdevs, num_switches,
 				      data);
 		if (ret) {
 			dev_err(max597x->dev, "IRQ setup failed");
 			return ret;
 		}
 	}

 	return ret;
 }

 static struct platform_driver max597x_regulator_driver = {
 	.driver = {
 		.name = "max597x-regulator",
 	},
 	.probe = max597x_regulator_probe,
 };

 module_platform_driver(max597x_regulator_driver);


 MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
 MODULE_DESCRIPTION("MAX5970_hot-swap controller driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Device driver for regulators in MAX5970 and MAX5978 IC
	*
	* Copyright (c) 2022 9elements GmbH
	*
	* Author: Patrick Rudolph <patrick.rudolph@9elements.com>
	*/

	#include <linux/bitops.h>
	#include <linux/device.h>
	#include <linux/err.h>
	#include <linux/module.h>
	#include <linux/io.h>
	#include <linux/of.h>
	#include <linux/i2c.h>
	#include <linux/regmap.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/machine.h>
	#include <linux/regulator/of_regulator.h>
	#include <linux/platform_device.h>

	#include <linux/mfd/max597x.h>

	struct max597x_regulator {
	int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
	struct regmap *regmap;
	};

	enum max597x_regulator_id {
	MAX597X_SW0,
	MAX597X_SW1,
	};

	static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
	{
	int ret, reg;

	/* Status1 register contains the soft strap values sampled at POR */
	ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS1, &reg);
	if (ret)
	return ret;

	/* Check soft straps match requested mode */
	if (severity == REGULATOR_SEVERITY_PROT) {
	if (STATUS1_PROT(reg) != STATUS1_PROT_SHUTDOWN)
	return -EOPNOTSUPP;

	return 0;
	}
	if (STATUS1_PROT(reg) == STATUS1_PROT_SHUTDOWN)
	return -EOPNOTSUPP;

	return 0;
	}

	static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
	bool enable, bool overvoltage)
	{
	int off_h, off_l, reg, ret;
	struct max597x_regulator *data = rdev_get_drvdata(rdev);
	int channel = rdev_get_id(rdev);

	if (overvoltage) {
	if (severity == REGULATOR_SEVERITY_WARN) {
	off_h = MAX5970_REG_CH_OV_WARN_H(channel);
	off_l = MAX5970_REG_CH_OV_WARN_L(channel);
	} else {
	off_h = MAX5970_REG_CH_OV_CRIT_H(channel);
	off_l = MAX5970_REG_CH_OV_CRIT_L(channel);
	}
	} else {
	if (severity == REGULATOR_SEVERITY_WARN) {
	off_h = MAX5970_REG_CH_UV_WARN_H(channel);
	off_l = MAX5970_REG_CH_UV_WARN_L(channel);
	} else {
	off_h = MAX5970_REG_CH_UV_CRIT_H(channel);
	off_l = MAX5970_REG_CH_UV_CRIT_L(channel);
	}
	}

	if (enable)
	/* reg = ADC_MASK * (lim_uV / 1000000) / (data->mon_rng / 1000000) */
	reg = ADC_MASK * lim_uV / data->mon_rng;
	else
	reg = 0;

	ret = regmap_write(rdev->regmap, off_h, MAX5970_VAL2REG_H(reg));
	if (ret)
	return ret;

	ret = regmap_write(rdev->regmap, off_l, MAX5970_VAL2REG_L(reg));
	if (ret)
	return ret;

	return 0;
	}

	static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
	bool enable)
	{
	int ret;

	/*
	* MAX5970 has enable control as a special value in limit reg. Can't
	* set limit but keep feature disabled or enable W/O given limit.
	*/
	if ((lim_uV && !enable) \|\| (!lim_uV && enable))
	return -EINVAL;

	ret = max597x_uvp_ovp_check_mode(rdev, severity);
	if (ret)
	return ret;

	return max597x_set_vp(rdev, lim_uV, severity, enable, false);
	}

	static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
	bool enable)
	{
	int ret;

	/*
	* MAX5970 has enable control as a special value in limit reg. Can't
	* set limit but keep feature disabled or enable W/O given limit.
	*/
	if ((lim_uV && !enable) \|\| (!lim_uV && enable))
	return -EINVAL;

	ret = max597x_uvp_ovp_check_mode(rdev, severity);
	if (ret)
	return ret;

	return max597x_set_vp(rdev, lim_uV, severity, enable, true);
	}

	static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
	int severity, bool enable)
	{
	int ret, val, reg;
	unsigned int vthst, vthfst;

	struct max597x_regulator *data = rdev_get_drvdata(rdev);
	int rdev_id = rdev_get_id(rdev);
	/*
	* MAX5970 doesn't has enable control for ocp.
	* If limit is specified but enable is not set then hold the value in
	* variable & later use it when ocp needs to be enabled.
	*/
	if (lim_uA != 0 && lim_uA != data->lim_uA)
	data->lim_uA = lim_uA;

	if (severity != REGULATOR_SEVERITY_PROT)
	return -EINVAL;

	if (enable) {

	/* Calc Vtrip threshold in uV. */
	vthst =
	div_u64(mul_u32_u32(data->shunt_micro_ohms, data->lim_uA),
	1000000);

	/*
	* As recommended in datasheed, add 20% margin to avoid
	* spurious event & passive component tolerance.
	*/
	vthst = div_u64(mul_u32_u32(vthst, 120), 100);

	/* Calc fast Vtrip threshold in uV */
	vthfst = vthst * (MAX5970_FAST2SLOW_RATIO / 100);

	if (vthfst > data->irng) {
	dev_err(&rdev->dev, "Current limit out of range\n");
	return -EINVAL;
	}
	/* Fast trip threshold to be programmed */
	val = div_u64(mul_u32_u32(0xFF, vthfst), data->irng);
	} else
	/*
	* Since there is no option to disable ocp, set limit to max
	* value
	*/
	val = 0xFF;

	reg = MAX5970_REG_DAC_FAST(rdev_id);
	ret = regmap_write(rdev->regmap, reg, val);

	return ret;
	}

	static int max597x_get_status(struct regulator_dev *rdev)
	{
	int val, ret;

	ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS3, &val);
	if (ret)
	return REGULATOR_FAILED_RETRY;

	if (val & MAX5970_STATUS3_ALERT)
	return REGULATOR_STATUS_ERROR;

	ret = regulator_is_enabled_regmap(rdev);
	if (ret < 0)
	return ret;

	if (ret)
	return REGULATOR_STATUS_ON;

	return REGULATOR_STATUS_OFF;
	}

	static const struct regulator_ops max597x_switch_ops = {
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.get_status = max597x_get_status,
	.set_over_voltage_protection = max597x_set_ovp,
	.set_under_voltage_protection = max597x_set_uvp,
	.set_over_current_protection = max597x_set_ocp,
	};

	static int max597x_dt_parse(struct device_node *np,
	const struct regulator_desc *desc,
	struct regulator_config *cfg)
	{
	struct max597x_regulator *data = cfg->driver_data;
	int ret = 0;

	ret =
	of_property_read_u32(np, "shunt-resistor-micro-ohms",
	&data->shunt_micro_ohms);
	if (ret < 0)
	dev_err(cfg->dev,
	"property 'shunt-resistor-micro-ohms' not found, err %d\n",
	ret);
	return ret;

	}

	#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) { \
	.name = #_ID, \
	.of_match = of_match_ptr(#_ID), \
	.ops = &max597x_switch_ops, \
	.regulators_node = of_match_ptr("regulators"), \
	.type = REGULATOR_VOLTAGE, \
	.id = MAX597X_##_ID, \
	.owner = THIS_MODULE, \
	.supply_name = _supply, \
	.enable_reg = _ereg, \
	.enable_mask = CHXEN((_chan)), \
	.of_parse_cb = max597x_dt_parse, \
	}

	static const struct regulator_desc regulators[] = {
	MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
	MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
	};

	static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
	unsigned int *val)
	{
	int ret;

	ret = regmap_read(map, reg, val);
	if (ret)
	return ret;

	if (*val)
	return regmap_write(map, reg, *val);

	return 0;
	}

	static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
	unsigned long *dev_mask)
	{
	struct regulator_err_state *stat;
	struct max597x_regulator d = (struct max597x_regulator )rid->data;
	int val, ret, i;

	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
	if (ret)
	return REGULATOR_FAILED_RETRY;

	*dev_mask = 0;
	for (i = 0; i < d->num_switches; i++) {
	stat = &rid->states[i];
	stat->notifs = 0;
	stat->errors = 0;
	}

	for (i = 0; i < d->num_switches; i++) {
	stat = &rid->states[i];

	if (val & UV_STATUS_CRIT(i)) {
	*dev_mask \|= 1 << i;
	stat->notifs \|= REGULATOR_EVENT_UNDER_VOLTAGE;
	stat->errors \|= REGULATOR_ERROR_UNDER_VOLTAGE;
	} else if (val & UV_STATUS_WARN(i)) {
	*dev_mask \|= 1 << i;
	stat->notifs \|= REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
	stat->errors \|= REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
	}
	}

	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
	if (ret)
	return REGULATOR_FAILED_RETRY;

	for (i = 0; i < d->num_switches; i++) {
	stat = &rid->states[i];

	if (val & OV_STATUS_CRIT(i)) {
	*dev_mask \|= 1 << i;
	stat->notifs \|= REGULATOR_EVENT_REGULATION_OUT;
	stat->errors \|= REGULATOR_ERROR_REGULATION_OUT;
	} else if (val & OV_STATUS_WARN(i)) {
	*dev_mask \|= 1 << i;
	stat->notifs \|= REGULATOR_EVENT_OVER_VOLTAGE_WARN;
	stat->errors \|= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
	}
	}

	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
	if (ret)
	return REGULATOR_FAILED_RETRY;

	for (i = 0; i < d->num_switches; i++) {
	stat = &rid->states[i];

	if (val & OC_STATUS_WARN(i)) {
	*dev_mask \|= 1 << i;
	stat->notifs \|= REGULATOR_EVENT_OVER_CURRENT_WARN;
	stat->errors \|= REGULATOR_ERROR_OVER_CURRENT_WARN;
	}
	}

	ret = regmap_read(d->regmap, MAX5970_REG_STATUS0, &val);
	if (ret)
	return REGULATOR_FAILED_RETRY;

	for (i = 0; i < d->num_switches; i++) {
	stat = &rid->states[i];

	if ((val & MAX5970_CB_IFAULTF(i))
	\|\| (val & MAX5970_CB_IFAULTS(i))) {
	*dev_mask \|= 1 << i;
	stat->notifs \|=
	REGULATOR_EVENT_OVER_CURRENT \|
	REGULATOR_EVENT_DISABLE;
	stat->errors \|=
	REGULATOR_ERROR_OVER_CURRENT \| REGULATOR_ERROR_FAIL;

	/* Clear the sub-IRQ status */
	regulator_disable_regmap(stat->rdev);
	}
	}
	return 0;
	}

	static const struct regmap_config max597x_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = MAX_REGISTERS,
	};

	static int max597x_adc_range(struct regmap *regmap, const int ch,
	u32 irng, u32 mon_rng)
	{
	unsigned int reg;
	int ret;

	/* Decode current ADC range */
	ret = regmap_read(regmap, MAX5970_REG_STATUS2, &reg);
	if (ret)
	return ret;
	switch (MAX5970_IRNG(reg, ch)) {
	case 0:
	irng = 100000; / 100 mV */
	break;
	case 1:
	irng = 50000; / 50 mV */
	break;
	case 2:
	irng = 25000; / 25 mV */
	break;
	default:
	return -EINVAL;
	}

	/* Decode current voltage monitor range */
	ret = regmap_read(regmap, MAX5970_REG_MON_RANGE, &reg);
	if (ret)
	return ret;

	*mon_rng = MAX5970_MON_MAX_RANGE_UV >> MAX5970_MON(reg, ch);

	return 0;
	}

	static int max597x_setup_irq(struct device *dev,
	int irq,
	struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
	int num_switches, struct max597x_regulator *data)
	{
	struct regulator_irq_desc max597x_notif = {
	.name = "max597x-irq",
	.map_event = max597x_irq_handler,
	.data = data,
	};
	int errs = REGULATOR_ERROR_UNDER_VOLTAGE \|
	REGULATOR_ERROR_UNDER_VOLTAGE_WARN \|
	REGULATOR_ERROR_OVER_VOLTAGE_WARN \|
	REGULATOR_ERROR_REGULATION_OUT \|
	REGULATOR_ERROR_OVER_CURRENT \|
	REGULATOR_ERROR_OVER_CURRENT_WARN \| REGULATOR_ERROR_FAIL;
	void *irq_helper;

	/* Register notifiers - can fail if IRQ is not given */
	irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
	irq, 0, errs, NULL,
	&rdevs[0], num_switches);
	if (IS_ERR(irq_helper)) {
	if (PTR_ERR(irq_helper) == -EPROBE_DEFER)
	return -EPROBE_DEFER;

	dev_warn(dev, "IRQ disabled %pe\n", irq_helper);
	}

	return 0;
	}

	static int max597x_regulator_probe(struct platform_device *pdev)
	{


	struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
	struct max597x_regulator *data;

	struct regulator_config config = { };
	struct regulator_dev *rdev;
	struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
	int num_switches = max597x->num_switches;
	int ret, i;

	for (i = 0; i < num_switches; i++) {
	data =
	devm_kzalloc(max597x->dev, sizeof(struct max597x_regulator),
	GFP_KERNEL);
	if (!data)
	return -ENOMEM;

	data->num_switches = num_switches;
	data->regmap = max597x->regmap;

	ret = max597x_adc_range(data->regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
	if (ret < 0)
	return ret;

	data->irng = max597x->irng[i];
	data->mon_rng = max597x->mon_rng[i];

	config.dev = max597x->dev;
	config.driver_data = (void *)data;
	config.regmap = data->regmap;
	rdev = devm_regulator_register(max597x->dev,
	&regulators[i], &config);
	if (IS_ERR(rdev)) {
	dev_err(max597x->dev, "failed to register regulator %s\n",
	regulators[i].name);
	return PTR_ERR(rdev);
	}
	rdevs[i] = rdev;
	max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
	}

	if (max597x->irq) {
	ret =
	max597x_setup_irq(max597x->dev, max597x->irq, rdevs, num_switches,
	data);
	if (ret) {
	dev_err(max597x->dev, "IRQ setup failed");
	return ret;
	}
	}

	return ret;
	}

	static struct platform_driver max597x_regulator_driver = {
	.driver = {
	.name = "max597x-regulator",
	},
	.probe = max597x_regulator_probe,
	};

	module_platform_driver(max597x_regulator_driver);


	MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
	MODULE_DESCRIPTION("MAX5970_hot-swap controller driver");
	MODULE_LICENSE("GPL v2");