| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: BOE TV101WUM-NL6 DSI Display Panel |
| |
| maintainers: |
| - Thierry Reding <thierry.reding@gmail.com> |
| - Sam Ravnborg <sam@ravnborg.org> |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel |
| - boe,tv101wum-nl6 |
| # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel |
| - auo,kd101n80-45na |
| # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel |
| - boe,tv101wum-n53 |
| # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel |
| - auo,b101uan08.3 |
| # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel |
| - boe,tv105wum-nw0 |
| # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel |
| - boe,tv110c9m-ll3 |
| # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel |
| - innolux,hj110iz-01a |
| |
| reg: |
| description: the virtual channel number of a DSI peripheral |
| |
| enable-gpios: |
| description: a GPIO spec for the enable pin |
| |
| pp1800-supply: |
| description: core voltage supply |
| |
| pp3300-supply: |
| description: core voltage supply |
| |
| avdd-supply: |
| description: phandle of the regulator that provides positive voltage |
| |
| avee-supply: |
| description: phandle of the regulator that provides negative voltage |
| |
| backlight: |
| description: phandle of the backlight device attached to the panel |
| |
| port: true |
| |
| required: |
| - compatible |
| - reg |
| - enable-gpios |
| - pp1800-supply |
| - avdd-supply |
| - avee-supply |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| panel@0 { |
| compatible = "boe,tv101wum-nl6"; |
| reg = <0>; |
| enable-gpios = <&pio 45 0>; |
| avdd-supply = <&ppvarn_lcd>; |
| avee-supply = <&ppvarp_lcd>; |
| pp1800-supply = <&pp1800_lcd>; |
| backlight = <&backlight_lcd0>; |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&dsi_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
