| * CA8210 IEEE 802.15.4 * |
| |
| Required properties: |
| - compatible: Should be "cascoda,ca8210" |
| - reg: Controlling chip select |
| - spi-max-frequency: Maximum clock speed, should be *less than* |
| 4000000 |
| - spi-cpol: Requires inverted clock polarity |
| - reset-gpio: GPIO attached to reset |
| - irq-gpio: GPIO attached to IRQ |
| Optional properties: |
| - extclock-enable: Include for the ca8210 to route its 16MHz clock |
| to an output |
| - extclock-freq: Frequency in Hz of the external clock |
| - extclock-gpio: GPIO of the ca8210 to output the clock on |
| |
| Example: |
| ca8210@0 { |
| compatible = "cascoda,ca8210"; |
| reg = <0>; |
| spi-max-frequency = <3000000>; |
| spi-cpol; |
| reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| extclock-enable; |
| extclock-freq = 16000000; |
| extclock-gpio = 2; |
| }; |
