| /* |
| * linux/include/asm-arm/arch-ks8695/regs-uart.h |
| * |
| * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> |
| * Copyright (C) 2006 Simtec Electronics |
| * |
| * KS8695 - UART register and bit definitions. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef KS8695_UART_H |
| #define KS8695_UART_H |
| |
| #define KS8695_UART_OFFSET (0xF0000 + 0xE000) |
| #define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET) |
| #define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET) |
| |
| |
| /* |
| * UART registers |
| */ |
| #define KS8695_URRB (0x00) /* Receive Buffer Register */ |
| #define KS8695_URTH (0x04) /* Transmit Holding Register */ |
| #define KS8695_URFC (0x08) /* FIFO Control Register */ |
| #define KS8695_URLC (0x0C) /* Line Control Register */ |
| #define KS8695_URMC (0x10) /* Modem Control Register */ |
| #define KS8695_URLS (0x14) /* Line Status Register */ |
| #define KS8695_URMS (0x18) /* Modem Status Register */ |
| #define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */ |
| #define KS8695_USR (0x20) /* Status Register */ |
| |
| |
| /* FIFO Control Register */ |
| #define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */ |
| #define URFC_URFRT_1 (0 << 6) |
| #define URFC_URFRT_4 (1 << 6) |
| #define URFC_URFRT_8 (2 << 6) |
| #define URFC_URFRT_14 (3 << 6) |
| #define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */ |
| #define URFC_URRFR (1 << 1) /* Receive FIFO Reset */ |
| #define URFC_URFE (1 << 0) /* FIFO Enable */ |
| |
| /* Line Control Register */ |
| #define URLC_URSBC (1 << 6) /* Set Break Condition */ |
| #define URLC_PARITY (7 << 3) /* Parity */ |
| #define URPE_NONE (0 << 3) |
| #define URPE_ODD (1 << 3) |
| #define URPE_EVEN (3 << 3) |
| #define URPE_MARK (5 << 3) |
| #define URPE_SPACE (7 << 3) |
| #define URLC_URSB (1 << 2) /* Stop Bits */ |
| #define URLC_URCL (3 << 0) /* Character Length */ |
| #define URCL_5 (0 << 0) |
| #define URCL_6 (1 << 0) |
| #define URCL_7 (2 << 0) |
| #define URCL_8 (3 << 0) |
| |
| /* Modem Control Register */ |
| #define URMC_URLB (1 << 4) /* Loop-back mode */ |
| #define URMC_UROUT2 (1 << 3) /* OUT2 signal */ |
| #define URMC_UROUT1 (1 << 2) /* OUT1 signal */ |
| #define URMC_URRTS (1 << 1) /* Request to Send */ |
| #define URMC_URDTR (1 << 0) /* Data Terminal Ready */ |
| |
| /* Line Status Register */ |
| #define URLS_URRFE (1 << 7) /* Receive FIFO Error */ |
| #define URLS_URTE (1 << 6) /* Transmit Empty */ |
| #define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */ |
| #define URLS_URBI (1 << 4) /* Break Interrupt */ |
| #define URLS_URFE (1 << 3) /* Framing Error */ |
| #define URLS_URPE (1 << 2) /* Parity Error */ |
| #define URLS_URROE (1 << 1) /* Receive Overrun Error */ |
| #define URLS_URDR (1 << 0) /* Receive Data Ready */ |
| |
| /* Modem Status Register */ |
| #define URMS_URDCD (1 << 7) /* Data Carrier Detect */ |
| #define URMS_URRI (1 << 6) /* Ring Indicator */ |
| #define URMS_URDSR (1 << 5) /* Data Set Ready */ |
| #define URMS_URCTS (1 << 4) /* Clear to Send */ |
| #define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */ |
| #define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */ |
| #define URMS_URDDST (1 << 1) /* Delta Data Set Ready */ |
| #define URMS_URDCTS (1 << 0) /* Delta Clear to Send */ |
| |
| /* Status Register */ |
| #define USR_UTI (1 << 0) /* Timeout Indication */ |
| |
| |
| #endif |
