| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // reset-uniphier-glue.c - Glue layer reset driver for UniPhier |
| // Copyright 2018 Socionext Inc. |
| // Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| #include <linux/reset/reset-simple.h> |
| |
| #define MAX_CLKS 2 |
| #define MAX_RSTS 2 |
| |
| struct uniphier_glue_reset_soc_data { |
| int nclks; |
| const char * const *clock_names; |
| int nrsts; |
| const char * const *reset_names; |
| }; |
| |
| struct uniphier_glue_reset_priv { |
| struct clk_bulk_data clk[MAX_CLKS]; |
| struct reset_control *rst[MAX_RSTS]; |
| struct reset_simple_data rdata; |
| const struct uniphier_glue_reset_soc_data *data; |
| }; |
| |
| static int uniphier_glue_reset_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct uniphier_glue_reset_priv *priv; |
| struct resource *res; |
| resource_size_t size; |
| const char *name; |
| int i, ret, nr; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->data = of_device_get_match_data(dev); |
| if (WARN_ON(!priv->data || priv->data->nclks > MAX_CLKS || |
| priv->data->nrsts > MAX_RSTS)) |
| return -EINVAL; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| size = resource_size(res); |
| priv->rdata.membase = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->rdata.membase)) |
| return PTR_ERR(priv->rdata.membase); |
| |
| for (i = 0; i < priv->data->nclks; i++) |
| priv->clk[i].id = priv->data->clock_names[i]; |
| ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < priv->data->nrsts; i++) { |
| name = priv->data->reset_names[i]; |
| priv->rst[i] = devm_reset_control_get_shared(dev, name); |
| if (IS_ERR(priv->rst[i])) |
| return PTR_ERR(priv->rst[i]); |
| } |
| |
| ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk); |
| if (ret) |
| return ret; |
| |
| for (nr = 0; nr < priv->data->nrsts; nr++) { |
| ret = reset_control_deassert(priv->rst[nr]); |
| if (ret) |
| goto out_rst_assert; |
| } |
| |
| spin_lock_init(&priv->rdata.lock); |
| priv->rdata.rcdev.owner = THIS_MODULE; |
| priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE; |
| priv->rdata.rcdev.ops = &reset_simple_ops; |
| priv->rdata.rcdev.of_node = dev->of_node; |
| priv->rdata.active_low = true; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| ret = devm_reset_controller_register(dev, &priv->rdata.rcdev); |
| if (ret) |
| goto out_rst_assert; |
| |
| return 0; |
| |
| out_rst_assert: |
| while (nr--) |
| reset_control_assert(priv->rst[nr]); |
| |
| clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); |
| |
| return ret; |
| } |
| |
| static int uniphier_glue_reset_remove(struct platform_device *pdev) |
| { |
| struct uniphier_glue_reset_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < priv->data->nrsts; i++) |
| reset_control_assert(priv->rst[i]); |
| |
| clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); |
| |
| return 0; |
| } |
| |
| static const char * const uniphier_pro4_clock_reset_names[] = { |
| "gio", "link", |
| }; |
| |
| static const struct uniphier_glue_reset_soc_data uniphier_pro4_data = { |
| .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names), |
| .clock_names = uniphier_pro4_clock_reset_names, |
| .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names), |
| .reset_names = uniphier_pro4_clock_reset_names, |
| }; |
| |
| static const char * const uniphier_pxs2_clock_reset_names[] = { |
| "link", |
| }; |
| |
| static const struct uniphier_glue_reset_soc_data uniphier_pxs2_data = { |
| .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), |
| .clock_names = uniphier_pxs2_clock_reset_names, |
| .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), |
| .reset_names = uniphier_pxs2_clock_reset_names, |
| }; |
| |
| static const struct of_device_id uniphier_glue_reset_match[] = { |
| { |
| .compatible = "socionext,uniphier-pro4-usb3-reset", |
| .data = &uniphier_pro4_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro5-usb3-reset", |
| .data = &uniphier_pro4_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-usb3-reset", |
| .data = &uniphier_pxs2_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld20-usb3-reset", |
| .data = &uniphier_pxs2_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-usb3-reset", |
| .data = &uniphier_pxs2_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro4-ahci-reset", |
| .data = &uniphier_pro4_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-ahci-reset", |
| .data = &uniphier_pxs2_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-ahci-reset", |
| .data = &uniphier_pxs2_data, |
| }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match); |
| |
| static struct platform_driver uniphier_glue_reset_driver = { |
| .probe = uniphier_glue_reset_probe, |
| .remove = uniphier_glue_reset_remove, |
| .driver = { |
| .name = "uniphier-glue-reset", |
| .of_match_table = uniphier_glue_reset_match, |
| }, |
| }; |
| module_platform_driver(uniphier_glue_reset_driver); |
| |
| MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); |
| MODULE_DESCRIPTION("UniPhier Glue layer reset driver"); |
| MODULE_LICENSE("GPL"); |