drivers/usb/dwc3/dwc3-of-simple.c

// SPDX-License-Identifier: GPL-2.0
/**
 * dwc3-of-simple.c - OF glue layer for simple integrations
 *
 * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
 *
 * Author: Felipe Balbi <balbi@ti.com>
 *
 * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov
 * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC
 * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>

struct dwc3_of_simple {
	struct device		*dev;
	struct clk		**clks;
	int			num_clocks;
	struct reset_control	*resets;
	bool			pulse_resets;
	bool			need_reset;
};

static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
{
	struct device		*dev = simple->dev;
	struct device_node	*np = dev->of_node;
	int			i;

	simple->num_clocks = count;

	if (!count)
		return 0;

	simple->clks = devm_kcalloc(dev, simple->num_clocks,
			sizeof(struct clk *), GFP_KERNEL);
	if (!simple->clks)
		return -ENOMEM;

	for (i = 0; i < simple->num_clocks; i++) {
		struct clk	*clk;
		int		ret;

		clk = of_clk_get(np, i);
		if (IS_ERR(clk)) {
			while (--i >= 0) {
				clk_disable_unprepare(simple->clks[i]);
				clk_put(simple->clks[i]);
			}
			return PTR_ERR(clk);
		}

		ret = clk_prepare_enable(clk);
		if (ret < 0) {
			while (--i >= 0) {
				clk_disable_unprepare(simple->clks[i]);
				clk_put(simple->clks[i]);
			}
			clk_put(clk);

			return ret;
		}

		simple->clks[i] = clk;
	}

	return 0;
}

static int dwc3_of_simple_probe(struct platform_device *pdev)
{
	struct dwc3_of_simple	*simple;
	struct device		*dev = &pdev->dev;
	struct device_node	*np = dev->of_node;

	int			ret;
	int			i;
	bool			shared_resets = false;

	simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
	if (!simple)
		return -ENOMEM;

	platform_set_drvdata(pdev, simple);
	simple->dev = dev;

	/*
	 * Some controllers need to toggle the usb3-otg reset before trying to
	 * initialize the PHY, otherwise the PHY times out.
	 */
	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
		simple->need_reset = true;

	if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") ||
	    of_device_is_compatible(np, "amlogic,meson-gxl-dwc3")) {
		shared_resets = true;
		simple->pulse_resets = true;
	}

	simple->resets = of_reset_control_array_get(np, shared_resets, true);
	if (IS_ERR(simple->resets)) {
		ret = PTR_ERR(simple->resets);
		dev_err(dev, "failed to get device resets, err=%d\n", ret);
		return ret;
	}

	if (simple->pulse_resets) {
		ret = reset_control_reset(simple->resets);
		if (ret)
			goto err_resetc_put;
	} else {
		ret = reset_control_deassert(simple->resets);
		if (ret)
			goto err_resetc_put;
	}

	ret = dwc3_of_simple_clk_init(simple, of_count_phandle_with_args(np,
						"clocks", "#clock-cells"));
	if (ret)
		goto err_resetc_assert;

	ret = of_platform_populate(np, NULL, NULL, dev);
	if (ret) {
		for (i = 0; i < simple->num_clocks; i++) {
			clk_disable_unprepare(simple->clks[i]);
			clk_put(simple->clks[i]);
		}

		goto err_resetc_assert;
	}

	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);
	pm_runtime_get_sync(dev);

	return 0;

err_resetc_assert:
	if (!simple->pulse_resets)
		reset_control_assert(simple->resets);

err_resetc_put:
	reset_control_put(simple->resets);
	return ret;
}

static int dwc3_of_simple_remove(struct platform_device *pdev)
{
	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
	struct device		*dev = &pdev->dev;
	int			i;

	of_platform_depopulate(dev);

	for (i = 0; i < simple->num_clocks; i++) {
		clk_disable_unprepare(simple->clks[i]);
		clk_put(simple->clks[i]);
	}
	simple->num_clocks = 0;

	if (!simple->pulse_resets)
		reset_control_assert(simple->resets);

	reset_control_put(simple->resets);

	pm_runtime_disable(dev);
	pm_runtime_put_noidle(dev);
	pm_runtime_set_suspended(dev);

	return 0;
}

#ifdef CONFIG_PM
static int dwc3_of_simple_runtime_suspend(struct device *dev)
{
	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
	int			i;

	for (i = 0; i < simple->num_clocks; i++)
		clk_disable(simple->clks[i]);

	return 0;
}

static int dwc3_of_simple_runtime_resume(struct device *dev)
{
	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
	int			ret;
	int			i;

	for (i = 0; i < simple->num_clocks; i++) {
		ret = clk_enable(simple->clks[i]);
		if (ret < 0) {
			while (--i >= 0)
				clk_disable(simple->clks[i]);
			return ret;
		}
	}

	return 0;
}

static int dwc3_of_simple_suspend(struct device *dev)
{
	struct dwc3_of_simple *simple = dev_get_drvdata(dev);

	if (simple->need_reset)
		reset_control_assert(simple->resets);

	return 0;
}

static int dwc3_of_simple_resume(struct device *dev)
{
	struct dwc3_of_simple *simple = dev_get_drvdata(dev);

	if (simple->need_reset)
		reset_control_deassert(simple->resets);

	return 0;
}
#endif

static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(dwc3_of_simple_suspend, dwc3_of_simple_resume)
	SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
			dwc3_of_simple_runtime_resume, NULL)
};

static const struct of_device_id of_dwc3_simple_match[] = {
	{ .compatible = "rockchip,rk3399-dwc3" },
	{ .compatible = "xlnx,zynqmp-dwc3" },
	{ .compatible = "cavium,octeon-7130-usb-uctl" },
	{ .compatible = "sprd,sc9860-dwc3" },
	{ .compatible = "amlogic,meson-axg-dwc3" },
	{ .compatible = "amlogic,meson-gxl-dwc3" },
	{ .compatible = "allwinner,sun50i-h6-dwc3" },
	{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);

static struct platform_driver dwc3_of_simple_driver = {
	.probe		= dwc3_of_simple_probe,
	.remove		= dwc3_of_simple_remove,
	.driver		= {
		.name	= "dwc3-of-simple",
		.of_match_table = of_dwc3_simple_match,
		.pm	= &dwc3_of_simple_dev_pm_ops,
	},
};

module_platform_driver(dwc3_of_simple_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");