| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PCIe driver for Marvell Armada 370 and Armada XP SoCs |
| * |
| * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/mbus.h> |
| #include <linux/msi.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_pci.h> |
| #include <linux/of_platform.h> |
| |
| #include "../pci.h" |
| #include "../pci-bridge-emul.h" |
| |
| /* |
| * PCIe unit register offsets. |
| */ |
| #define PCIE_DEV_ID_OFF 0x0000 |
| #define PCIE_CMD_OFF 0x0004 |
| #define PCIE_DEV_REV_OFF 0x0008 |
| #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) |
| #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) |
| #define PCIE_CAP_PCIEXP 0x0060 |
| #define PCIE_HEADER_LOG_4_OFF 0x0128 |
| #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) |
| #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) |
| #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) |
| #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) |
| #define PCIE_WIN5_CTRL_OFF 0x1880 |
| #define PCIE_WIN5_BASE_OFF 0x1884 |
| #define PCIE_WIN5_REMAP_OFF 0x188c |
| #define PCIE_CONF_ADDR_OFF 0x18f8 |
| #define PCIE_CONF_ADDR_EN 0x80000000 |
| #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) |
| #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) |
| #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) |
| #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) |
| #define PCIE_CONF_ADDR(bus, devfn, where) \ |
| (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ |
| PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ |
| PCIE_CONF_ADDR_EN) |
| #define PCIE_CONF_DATA_OFF 0x18fc |
| #define PCIE_MASK_OFF 0x1910 |
| #define PCIE_MASK_ENABLE_INTS 0x0f000000 |
| #define PCIE_CTRL_OFF 0x1a00 |
| #define PCIE_CTRL_X1_MODE 0x0001 |
| #define PCIE_STAT_OFF 0x1a04 |
| #define PCIE_STAT_BUS 0xff00 |
| #define PCIE_STAT_DEV 0x1f0000 |
| #define PCIE_STAT_LINK_DOWN BIT(0) |
| #define PCIE_RC_RTSTA 0x1a14 |
| #define PCIE_DEBUG_CTRL 0x1a60 |
| #define PCIE_DEBUG_SOFT_RESET BIT(20) |
| |
| struct mvebu_pcie_port; |
| |
| /* Structure representing all PCIe interfaces */ |
| struct mvebu_pcie { |
| struct platform_device *pdev; |
| struct mvebu_pcie_port *ports; |
| struct msi_controller *msi; |
| struct list_head resources; |
| struct resource io; |
| struct resource realio; |
| struct resource mem; |
| struct resource busn; |
| int nports; |
| }; |
| |
| struct mvebu_pcie_window { |
| phys_addr_t base; |
| phys_addr_t remap; |
| size_t size; |
| }; |
| |
| /* Structure representing one PCIe interface */ |
| struct mvebu_pcie_port { |
| char *name; |
| void __iomem *base; |
| u32 port; |
| u32 lane; |
| int devfn; |
| unsigned int mem_target; |
| unsigned int mem_attr; |
| unsigned int io_target; |
| unsigned int io_attr; |
| struct clk *clk; |
| struct gpio_desc *reset_gpio; |
| char *reset_name; |
| struct pci_bridge_emul bridge; |
| struct device_node *dn; |
| struct mvebu_pcie *pcie; |
| struct mvebu_pcie_window memwin; |
| struct mvebu_pcie_window iowin; |
| u32 saved_pcie_stat; |
| }; |
| |
| static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg) |
| { |
| writel(val, port->base + reg); |
| } |
| |
| static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg) |
| { |
| return readl(port->base + reg); |
| } |
| |
| static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port) |
| { |
| return port->io_target != -1 && port->io_attr != -1; |
| } |
| |
| static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) |
| { |
| return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); |
| } |
| |
| static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) |
| { |
| u32 stat; |
| |
| stat = mvebu_readl(port, PCIE_STAT_OFF); |
| stat &= ~PCIE_STAT_BUS; |
| stat |= nr << 8; |
| mvebu_writel(port, stat, PCIE_STAT_OFF); |
| } |
| |
| static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) |
| { |
| u32 stat; |
| |
| stat = mvebu_readl(port, PCIE_STAT_OFF); |
| stat &= ~PCIE_STAT_DEV; |
| stat |= nr << 16; |
| mvebu_writel(port, stat, PCIE_STAT_OFF); |
| } |
| |
| /* |
| * Setup PCIE BARs and Address Decode Wins: |
| * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks |
| * WIN[0-3] -> DRAM bank[0-3] |
| */ |
| static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) |
| { |
| const struct mbus_dram_target_info *dram; |
| u32 size; |
| int i; |
| |
| dram = mv_mbus_dram_info(); |
| |
| /* First, disable and clear BARs and windows. */ |
| for (i = 1; i < 3; i++) { |
| mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i)); |
| mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i)); |
| mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i)); |
| } |
| |
| for (i = 0; i < 5; i++) { |
| mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i)); |
| mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i)); |
| mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); |
| } |
| |
| mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF); |
| mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF); |
| mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF); |
| |
| /* Setup windows for DDR banks. Count total DDR size on the fly. */ |
| size = 0; |
| for (i = 0; i < dram->num_cs; i++) { |
| const struct mbus_dram_window *cs = dram->cs + i; |
| |
| mvebu_writel(port, cs->base & 0xffff0000, |
| PCIE_WIN04_BASE_OFF(i)); |
| mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); |
| mvebu_writel(port, |
| ((cs->size - 1) & 0xffff0000) | |
| (cs->mbus_attr << 8) | |
| (dram->mbus_dram_target_id << 4) | 1, |
| PCIE_WIN04_CTRL_OFF(i)); |
| |
| size += cs->size; |
| } |
| |
| /* Round up 'size' to the nearest power of two. */ |
| if ((size & (size - 1)) != 0) |
| size = 1 << fls(size); |
| |
| /* Setup BAR[1] to all DRAM banks. */ |
| mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1)); |
| mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1)); |
| mvebu_writel(port, ((size - 1) & 0xffff0000) | 1, |
| PCIE_BAR_CTRL_OFF(1)); |
| } |
| |
| static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) |
| { |
| u32 cmd, mask; |
| |
| /* Point PCIe unit MBUS decode windows to DRAM space. */ |
| mvebu_pcie_setup_wins(port); |
| |
| /* Master + slave enable. */ |
| cmd = mvebu_readl(port, PCIE_CMD_OFF); |
| cmd |= PCI_COMMAND_IO; |
| cmd |= PCI_COMMAND_MEMORY; |
| cmd |= PCI_COMMAND_MASTER; |
| mvebu_writel(port, cmd, PCIE_CMD_OFF); |
| |
| /* Enable interrupt lines A-D. */ |
| mask = mvebu_readl(port, PCIE_MASK_OFF); |
| mask |= PCIE_MASK_ENABLE_INTS; |
| mvebu_writel(port, mask, PCIE_MASK_OFF); |
| } |
| |
| static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, |
| struct pci_bus *bus, |
| u32 devfn, int where, int size, u32 *val) |
| { |
| void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; |
| |
| mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), |
| PCIE_CONF_ADDR_OFF); |
| |
| switch (size) { |
| case 1: |
| *val = readb_relaxed(conf_data + (where & 3)); |
| break; |
| case 2: |
| *val = readw_relaxed(conf_data + (where & 2)); |
| break; |
| case 4: |
| *val = readl_relaxed(conf_data); |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, |
| struct pci_bus *bus, |
| u32 devfn, int where, int size, u32 val) |
| { |
| void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; |
| |
| mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), |
| PCIE_CONF_ADDR_OFF); |
| |
| switch (size) { |
| case 1: |
| writeb(val, conf_data + (where & 3)); |
| break; |
| case 2: |
| writew(val, conf_data + (where & 2)); |
| break; |
| case 4: |
| writel(val, conf_data); |
| break; |
| default: |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * Remove windows, starting from the largest ones to the smallest |
| * ones. |
| */ |
| static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port, |
| phys_addr_t base, size_t size) |
| { |
| while (size) { |
| size_t sz = 1 << (fls(size) - 1); |
| |
| mvebu_mbus_del_window(base, sz); |
| base += sz; |
| size -= sz; |
| } |
| } |
| |
| /* |
| * MBus windows can only have a power of two size, but PCI BARs do not |
| * have this constraint. Therefore, we have to split the PCI BAR into |
| * areas each having a power of two size. We start from the largest |
| * one (i.e highest order bit set in the size). |
| */ |
| static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port, |
| unsigned int target, unsigned int attribute, |
| phys_addr_t base, size_t size, |
| phys_addr_t remap) |
| { |
| size_t size_mapped = 0; |
| |
| while (size) { |
| size_t sz = 1 << (fls(size) - 1); |
| int ret; |
| |
| ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base, |
| sz, remap); |
| if (ret) { |
| phys_addr_t end = base + sz - 1; |
| |
| dev_err(&port->pcie->pdev->dev, |
| "Could not create MBus window at [mem %pa-%pa]: %d\n", |
| &base, &end, ret); |
| mvebu_pcie_del_windows(port, base - size_mapped, |
| size_mapped); |
| return; |
| } |
| |
| size -= sz; |
| size_mapped += sz; |
| base += sz; |
| if (remap != MVEBU_MBUS_NO_REMAP) |
| remap += sz; |
| } |
| } |
| |
| static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, |
| unsigned int target, unsigned int attribute, |
| const struct mvebu_pcie_window *desired, |
| struct mvebu_pcie_window *cur) |
| { |
| if (desired->base == cur->base && desired->remap == cur->remap && |
| desired->size == cur->size) |
| return; |
| |
| if (cur->size != 0) { |
| mvebu_pcie_del_windows(port, cur->base, cur->size); |
| cur->size = 0; |
| cur->base = 0; |
| |
| /* |
| * If something tries to change the window while it is enabled |
| * the change will not be done atomically. That would be |
| * difficult to do in the general case. |
| */ |
| } |
| |
| if (desired->size == 0) |
| return; |
| |
| mvebu_pcie_add_windows(port, target, attribute, desired->base, |
| desired->size, desired->remap); |
| *cur = *desired; |
| } |
| |
| static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) |
| { |
| struct mvebu_pcie_window desired = {}; |
| struct pci_bridge_emul_conf *conf = &port->bridge.conf; |
| |
| /* Are the new iobase/iolimit values invalid? */ |
| if (conf->iolimit < conf->iobase || |
| conf->iolimitupper < conf->iobaseupper || |
| !(conf->command & PCI_COMMAND_IO)) { |
| mvebu_pcie_set_window(port, port->io_target, port->io_attr, |
| &desired, &port->iowin); |
| return; |
| } |
| |
| if (!mvebu_has_ioport(port)) { |
| dev_WARN(&port->pcie->pdev->dev, |
| "Attempt to set IO when IO is disabled\n"); |
| return; |
| } |
| |
| /* |
| * We read the PCI-to-PCI bridge emulated registers, and |
| * calculate the base address and size of the address decoding |
| * window to setup, according to the PCI-to-PCI bridge |
| * specifications. iobase is the bus address, port->iowin_base |
| * is the CPU address. |
| */ |
| desired.remap = ((conf->iobase & 0xF0) << 8) | |
| (conf->iobaseupper << 16); |
| desired.base = port->pcie->io.start + desired.remap; |
| desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) | |
| (conf->iolimitupper << 16)) - |
| desired.remap) + |
| 1; |
| |
| mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, |
| &port->iowin); |
| } |
| |
| static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) |
| { |
| struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; |
| struct pci_bridge_emul_conf *conf = &port->bridge.conf; |
| |
| /* Are the new membase/memlimit values invalid? */ |
| if (conf->memlimit < conf->membase || |
| !(conf->command & PCI_COMMAND_MEMORY)) { |
| mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, |
| &desired, &port->memwin); |
| return; |
| } |
| |
| /* |
| * We read the PCI-to-PCI bridge emulated registers, and |
| * calculate the base address and size of the address decoding |
| * window to setup, according to the PCI-to-PCI bridge |
| * specifications. |
| */ |
| desired.base = ((conf->membase & 0xFFF0) << 16); |
| desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) - |
| desired.base + 1; |
| |
| mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, |
| &port->memwin); |
| } |
| |
| static pci_bridge_emul_read_status_t |
| mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, |
| int reg, u32 *value) |
| { |
| struct mvebu_pcie_port *port = bridge->data; |
| |
| switch (reg) { |
| case PCI_EXP_DEVCAP: |
| *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP); |
| break; |
| |
| case PCI_EXP_DEVCTL: |
| *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) & |
| ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE | |
| PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE); |
| break; |
| |
| case PCI_EXP_LNKCAP: |
| /* |
| * PCIe requires the clock power management capability to be |
| * hard-wired to zero for downstream ports |
| */ |
| *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) & |
| ~PCI_EXP_LNKCAP_CLKPM; |
| break; |
| |
| case PCI_EXP_LNKCTL: |
| *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); |
| break; |
| |
| case PCI_EXP_SLTCTL: |
| *value = PCI_EXP_SLTSTA_PDS << 16; |
| break; |
| |
| case PCI_EXP_RTSTA: |
| *value = mvebu_readl(port, PCIE_RC_RTSTA); |
| break; |
| |
| default: |
| return PCI_BRIDGE_EMUL_NOT_HANDLED; |
| } |
| |
| return PCI_BRIDGE_EMUL_HANDLED; |
| } |
| |
| static void |
| mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge, |
| int reg, u32 old, u32 new, u32 mask) |
| { |
| struct mvebu_pcie_port *port = bridge->data; |
| struct pci_bridge_emul_conf *conf = &bridge->conf; |
| |
| switch (reg) { |
| case PCI_COMMAND: |
| { |
| if (!mvebu_has_ioport(port)) |
| conf->command &= ~PCI_COMMAND_IO; |
| |
| if ((old ^ new) & PCI_COMMAND_IO) |
| mvebu_pcie_handle_iobase_change(port); |
| if ((old ^ new) & PCI_COMMAND_MEMORY) |
| mvebu_pcie_handle_membase_change(port); |
| |
| break; |
| } |
| |
| case PCI_IO_BASE: |
| /* |
| * We keep bit 1 set, it is a read-only bit that |
| * indicates we support 32 bits addressing for the |
| * I/O |
| */ |
| conf->iobase |= PCI_IO_RANGE_TYPE_32; |
| conf->iolimit |= PCI_IO_RANGE_TYPE_32; |
| mvebu_pcie_handle_iobase_change(port); |
| break; |
| |
| case PCI_MEMORY_BASE: |
| mvebu_pcie_handle_membase_change(port); |
| break; |
| |
| case PCI_IO_BASE_UPPER16: |
| mvebu_pcie_handle_iobase_change(port); |
| break; |
| |
| case PCI_PRIMARY_BUS: |
| mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void |
| mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, |
| int reg, u32 old, u32 new, u32 mask) |
| { |
| struct mvebu_pcie_port *port = bridge->data; |
| |
| switch (reg) { |
| case PCI_EXP_DEVCTL: |
| /* |
| * Armada370 data says these bits must always |
| * be zero when in root complex mode. |
| */ |
| new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE | |
| PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE); |
| |
| mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL); |
| break; |
| |
| case PCI_EXP_LNKCTL: |
| /* |
| * If we don't support CLKREQ, we must ensure that the |
| * CLKREQ enable bit always reads zero. Since we haven't |
| * had this capability, and it's dependent on board wiring, |
| * disable it for the time being. |
| */ |
| new &= ~PCI_EXP_LNKCTL_CLKREQ_EN; |
| |
| mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); |
| break; |
| |
| case PCI_EXP_RTSTA: |
| mvebu_writel(port, new, PCIE_RC_RTSTA); |
| break; |
| } |
| } |
| |
| static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = { |
| .write_base = mvebu_pci_bridge_emul_base_conf_write, |
| .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read, |
| .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write, |
| }; |
| |
| /* |
| * Initialize the configuration space of the PCI-to-PCI bridge |
| * associated with the given PCIe interface. |
| */ |
| static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port) |
| { |
| struct pci_bridge_emul *bridge = &port->bridge; |
| |
| bridge->conf.vendor = PCI_VENDOR_ID_MARVELL; |
| bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16; |
| bridge->conf.class_revision = |
| mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff; |
| |
| if (mvebu_has_ioport(port)) { |
| /* We support 32 bits I/O addressing */ |
| bridge->conf.iobase = PCI_IO_RANGE_TYPE_32; |
| bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32; |
| } |
| |
| bridge->has_pcie = true; |
| bridge->data = port; |
| bridge->ops = &mvebu_pci_bridge_emul_ops; |
| |
| pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR); |
| } |
| |
| static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) |
| { |
| return sys->private_data; |
| } |
| |
| static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, |
| struct pci_bus *bus, |
| int devfn) |
| { |
| int i; |
| |
| for (i = 0; i < pcie->nports; i++) { |
| struct mvebu_pcie_port *port = &pcie->ports[i]; |
| |
| if (bus->number == 0 && port->devfn == devfn) |
| return port; |
| if (bus->number != 0 && |
| bus->number >= port->bridge.conf.secondary_bus && |
| bus->number <= port->bridge.conf.subordinate_bus) |
| return port; |
| } |
| |
| return NULL; |
| } |
| |
| /* PCI configuration space write function */ |
| static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, |
| int where, int size, u32 val) |
| { |
| struct mvebu_pcie *pcie = bus->sysdata; |
| struct mvebu_pcie_port *port; |
| int ret; |
| |
| port = mvebu_pcie_find_port(pcie, bus, devfn); |
| if (!port) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* Access the emulated PCI-to-PCI bridge */ |
| if (bus->number == 0) |
| return pci_bridge_emul_conf_write(&port->bridge, where, |
| size, val); |
| |
| if (!mvebu_pcie_link_up(port)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* Access the real PCIe interface */ |
| ret = mvebu_pcie_hw_wr_conf(port, bus, devfn, |
| where, size, val); |
| |
| return ret; |
| } |
| |
| /* PCI configuration space read function */ |
| static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, |
| int size, u32 *val) |
| { |
| struct mvebu_pcie *pcie = bus->sysdata; |
| struct mvebu_pcie_port *port; |
| int ret; |
| |
| port = mvebu_pcie_find_port(pcie, bus, devfn); |
| if (!port) { |
| *val = 0xffffffff; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| /* Access the emulated PCI-to-PCI bridge */ |
| if (bus->number == 0) |
| return pci_bridge_emul_conf_read(&port->bridge, where, |
| size, val); |
| |
| if (!mvebu_pcie_link_up(port)) { |
| *val = 0xffffffff; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| /* Access the real PCIe interface */ |
| ret = mvebu_pcie_hw_rd_conf(port, bus, devfn, |
| where, size, val); |
| |
| return ret; |
| } |
| |
| static struct pci_ops mvebu_pcie_ops = { |
| .read = mvebu_pcie_rd_conf, |
| .write = mvebu_pcie_wr_conf, |
| }; |
| |
| static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, |
| const struct resource *res, |
| resource_size_t start, |
| resource_size_t size, |
| resource_size_t align) |
| { |
| if (dev->bus->number != 0) |
| return start; |
| |
| /* |
| * On the PCI-to-PCI bridge side, the I/O windows must have at |
| * least a 64 KB size and the memory windows must have at |
| * least a 1 MB size. Moreover, MBus windows need to have a |
| * base address aligned on their size, and their size must be |
| * a power of two. This means that if the BAR doesn't have a |
| * power of two size, several MBus windows will actually be |
| * created. We need to ensure that the biggest MBus window |
| * (which will be the first one) is aligned on its size, which |
| * explains the rounddown_pow_of_two() being done here. |
| */ |
| if (res->flags & IORESOURCE_IO) |
| return round_up(start, max_t(resource_size_t, SZ_64K, |
| rounddown_pow_of_two(size))); |
| else if (res->flags & IORESOURCE_MEM) |
| return round_up(start, max_t(resource_size_t, SZ_1M, |
| rounddown_pow_of_two(size))); |
| else |
| return start; |
| } |
| |
| static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev, |
| struct device_node *np, |
| struct mvebu_pcie_port *port) |
| { |
| struct resource regs; |
| int ret = 0; |
| |
| ret = of_address_to_resource(np, 0, ®s); |
| if (ret) |
| return (void __iomem *)ERR_PTR(ret); |
| |
| return devm_ioremap_resource(&pdev->dev, ®s); |
| } |
| |
| #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) |
| #define DT_TYPE_IO 0x1 |
| #define DT_TYPE_MEM32 0x2 |
| #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF) |
| #define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF) |
| |
| static int mvebu_get_tgt_attr(struct device_node *np, int devfn, |
| unsigned long type, |
| unsigned int *tgt, |
| unsigned int *attr) |
| { |
| const int na = 3, ns = 2; |
| const __be32 *range; |
| int rlen, nranges, rangesz, pna, i; |
| |
| *tgt = -1; |
| *attr = -1; |
| |
| range = of_get_property(np, "ranges", &rlen); |
| if (!range) |
| return -EINVAL; |
| |
| pna = of_n_addr_cells(np); |
| rangesz = pna + na + ns; |
| nranges = rlen / sizeof(__be32) / rangesz; |
| |
| for (i = 0; i < nranges; i++, range += rangesz) { |
| u32 flags = of_read_number(range, 1); |
| u32 slot = of_read_number(range + 1, 1); |
| u64 cpuaddr = of_read_number(range + na, pna); |
| unsigned long rtype; |
| |
| if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO) |
| rtype = IORESOURCE_IO; |
| else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32) |
| rtype = IORESOURCE_MEM; |
| else |
| continue; |
| |
| if (slot == PCI_SLOT(devfn) && type == rtype) { |
| *tgt = DT_CPUADDR_TO_TARGET(cpuaddr); |
| *attr = DT_CPUADDR_TO_ATTR(cpuaddr); |
| return 0; |
| } |
| } |
| |
| return -ENOENT; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mvebu_pcie_suspend(struct device *dev) |
| { |
| struct mvebu_pcie *pcie; |
| int i; |
| |
| pcie = dev_get_drvdata(dev); |
| for (i = 0; i < pcie->nports; i++) { |
| struct mvebu_pcie_port *port = pcie->ports + i; |
| port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF); |
| } |
| |
| return 0; |
| } |
| |
| static int mvebu_pcie_resume(struct device *dev) |
| { |
| struct mvebu_pcie *pcie; |
| int i; |
| |
| pcie = dev_get_drvdata(dev); |
| for (i = 0; i < pcie->nports; i++) { |
| struct mvebu_pcie_port *port = pcie->ports + i; |
| mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF); |
| mvebu_pcie_setup_hw(port); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static void mvebu_pcie_port_clk_put(void *data) |
| { |
| struct mvebu_pcie_port *port = data; |
| |
| clk_put(port->clk); |
| } |
| |
| static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, |
| struct mvebu_pcie_port *port, struct device_node *child) |
| { |
| struct device *dev = &pcie->pdev->dev; |
| enum of_gpio_flags flags; |
| int reset_gpio, ret; |
| |
| port->pcie = pcie; |
| |
| if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) { |
| dev_warn(dev, "ignoring %pOF, missing pcie-port property\n", |
| child); |
| goto skip; |
| } |
| |
| if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane)) |
| port->lane = 0; |
| |
| port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port, |
| port->lane); |
| if (!port->name) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| port->devfn = of_pci_get_devfn(child); |
| if (port->devfn < 0) |
| goto skip; |
| |
| ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM, |
| &port->mem_target, &port->mem_attr); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot get tgt/attr for mem window\n", |
| port->name); |
| goto skip; |
| } |
| |
| if (resource_size(&pcie->io) != 0) { |
| mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO, |
| &port->io_target, &port->io_attr); |
| } else { |
| port->io_target = -1; |
| port->io_attr = -1; |
| } |
| |
| reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags); |
| if (reset_gpio == -EPROBE_DEFER) { |
| ret = reset_gpio; |
| goto err; |
| } |
| |
| if (gpio_is_valid(reset_gpio)) { |
| unsigned long gpio_flags; |
| |
| port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset", |
| port->name); |
| if (!port->reset_name) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| if (flags & OF_GPIO_ACTIVE_LOW) { |
| dev_info(dev, "%pOF: reset gpio is active low\n", |
| child); |
| gpio_flags = GPIOF_ACTIVE_LOW | |
| GPIOF_OUT_INIT_LOW; |
| } else { |
| gpio_flags = GPIOF_OUT_INIT_HIGH; |
| } |
| |
| ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags, |
| port->reset_name); |
| if (ret) { |
| if (ret == -EPROBE_DEFER) |
| goto err; |
| goto skip; |
| } |
| |
| port->reset_gpio = gpio_to_desc(reset_gpio); |
| } |
| |
| port->clk = of_clk_get_by_name(child, NULL); |
| if (IS_ERR(port->clk)) { |
| dev_err(dev, "%s: cannot get clock\n", port->name); |
| goto skip; |
| } |
| |
| ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port); |
| if (ret < 0) { |
| clk_put(port->clk); |
| goto err; |
| } |
| |
| return 1; |
| |
| skip: |
| ret = 0; |
| |
| /* In the case of skipping, we need to free these */ |
| devm_kfree(dev, port->reset_name); |
| port->reset_name = NULL; |
| devm_kfree(dev, port->name); |
| port->name = NULL; |
| |
| err: |
| return ret; |
| } |
| |
| /* |
| * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs |
| * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications |
| * of the PCI Express Card Electromechanical Specification, 1.1. |
| */ |
| static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(port->clk); |
| if (ret < 0) |
| return ret; |
| |
| if (port->reset_gpio) { |
| u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; |
| |
| of_property_read_u32(port->dn, "reset-delay-us", |
| &reset_udelay); |
| |
| udelay(100); |
| |
| gpiod_set_value_cansleep(port->reset_gpio, 0); |
| msleep(reset_udelay / 1000); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Power down a PCIe port. Strictly, PCIe requires us to place the card |
| * in D3hot state before asserting PERST#. |
| */ |
| static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port) |
| { |
| gpiod_set_value_cansleep(port->reset_gpio, 1); |
| |
| clk_disable_unprepare(port->clk); |
| } |
| |
| /* |
| * We can't use devm_of_pci_get_host_bridge_resources() because we |
| * need to parse our special DT properties encoding the MEM and IO |
| * apertures. |
| */ |
| static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) |
| { |
| struct device *dev = &pcie->pdev->dev; |
| struct device_node *np = dev->of_node; |
| int ret; |
| |
| INIT_LIST_HEAD(&pcie->resources); |
| |
| /* Get the bus range */ |
| ret = of_pci_parse_bus_range(np, &pcie->busn); |
| if (ret) { |
| dev_err(dev, "failed to parse bus-range property: %d\n", ret); |
| return ret; |
| } |
| pci_add_resource(&pcie->resources, &pcie->busn); |
| |
| /* Get the PCIe memory aperture */ |
| mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); |
| if (resource_size(&pcie->mem) == 0) { |
| dev_err(dev, "invalid memory aperture size\n"); |
| return -EINVAL; |
| } |
| |
| pcie->mem.name = "PCI MEM"; |
| pci_add_resource(&pcie->resources, &pcie->mem); |
| |
| /* Get the PCIe IO aperture */ |
| mvebu_mbus_get_pcie_io_aperture(&pcie->io); |
| |
| if (resource_size(&pcie->io) != 0) { |
| pcie->realio.flags = pcie->io.flags; |
| pcie->realio.start = PCIBIOS_MIN_IO; |
| pcie->realio.end = min_t(resource_size_t, |
| IO_SPACE_LIMIT - SZ_64K, |
| resource_size(&pcie->io) - 1); |
| pcie->realio.name = "PCI I/O"; |
| |
| pci_add_resource(&pcie->resources, &pcie->realio); |
| } |
| |
| return devm_request_pci_bus_resources(dev, &pcie->resources); |
| } |
| |
| /* |
| * This is a copy of pci_host_probe(), except that it does the I/O |
| * remap as the last step, once we are sure we won't fail. |
| * |
| * It should be removed once the I/O remap error handling issue has |
| * been sorted out. |
| */ |
| static int mvebu_pci_host_probe(struct pci_host_bridge *bridge) |
| { |
| struct mvebu_pcie *pcie; |
| struct pci_bus *bus, *child; |
| int ret; |
| |
| ret = pci_scan_root_bus_bridge(bridge); |
| if (ret < 0) { |
| dev_err(bridge->dev.parent, "Scanning root bridge failed"); |
| return ret; |
| } |
| |
| pcie = pci_host_bridge_priv(bridge); |
| if (resource_size(&pcie->io) != 0) { |
| unsigned int i; |
| |
| for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K) |
| pci_ioremap_io(i, pcie->io.start + i); |
| } |
| |
| bus = bridge->bus; |
| |
| /* |
| * We insert PCI resources into the iomem_resource and |
| * ioport_resource trees in either pci_bus_claim_resources() |
| * or pci_bus_assign_resources(). |
| */ |
| if (pci_has_flag(PCI_PROBE_ONLY)) { |
| pci_bus_claim_resources(bus); |
| } else { |
| pci_bus_size_bridges(bus); |
| pci_bus_assign_resources(bus); |
| |
| list_for_each_entry(child, &bus->children, node) |
| pcie_bus_configure_settings(child); |
| } |
| |
| pci_bus_add_devices(bus); |
| return 0; |
| } |
| |
| static int mvebu_pcie_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mvebu_pcie *pcie; |
| struct pci_host_bridge *bridge; |
| struct device_node *np = dev->of_node; |
| struct device_node *child; |
| int num, i, ret; |
| |
| bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie)); |
| if (!bridge) |
| return -ENOMEM; |
| |
| pcie = pci_host_bridge_priv(bridge); |
| pcie->pdev = pdev; |
| platform_set_drvdata(pdev, pcie); |
| |
| ret = mvebu_pcie_parse_request_resources(pcie); |
| if (ret) |
| return ret; |
| |
| num = of_get_available_child_count(np); |
| |
| pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL); |
| if (!pcie->ports) |
| return -ENOMEM; |
| |
| i = 0; |
| for_each_available_child_of_node(np, child) { |
| struct mvebu_pcie_port *port = &pcie->ports[i]; |
| |
| ret = mvebu_pcie_parse_port(pcie, port, child); |
| if (ret < 0) { |
| of_node_put(child); |
| return ret; |
| } else if (ret == 0) { |
| continue; |
| } |
| |
| port->dn = child; |
| i++; |
| } |
| pcie->nports = i; |
| |
| for (i = 0; i < pcie->nports; i++) { |
| struct mvebu_pcie_port *port = &pcie->ports[i]; |
| |
| child = port->dn; |
| if (!child) |
| continue; |
| |
| ret = mvebu_pcie_powerup(port); |
| if (ret < 0) |
| continue; |
| |
| port->base = mvebu_pcie_map_registers(pdev, child, port); |
| if (IS_ERR(port->base)) { |
| dev_err(dev, "%s: cannot map registers\n", port->name); |
| port->base = NULL; |
| mvebu_pcie_powerdown(port); |
| continue; |
| } |
| |
| mvebu_pcie_setup_hw(port); |
| mvebu_pcie_set_local_dev_nr(port, 1); |
| mvebu_pci_bridge_emul_init(port); |
| } |
| |
| pcie->nports = i; |
| |
| list_splice_init(&pcie->resources, &bridge->windows); |
| bridge->dev.parent = dev; |
| bridge->sysdata = pcie; |
| bridge->busnr = 0; |
| bridge->ops = &mvebu_pcie_ops; |
| bridge->map_irq = of_irq_parse_and_map_pci; |
| bridge->swizzle_irq = pci_common_swizzle; |
| bridge->align_resource = mvebu_pcie_align_resource; |
| bridge->msi = pcie->msi; |
| |
| return mvebu_pci_host_probe(bridge); |
| } |
| |
| static const struct of_device_id mvebu_pcie_of_match_table[] = { |
| { .compatible = "marvell,armada-xp-pcie", }, |
| { .compatible = "marvell,armada-370-pcie", }, |
| { .compatible = "marvell,dove-pcie", }, |
| { .compatible = "marvell,kirkwood-pcie", }, |
| {}, |
| }; |
| |
| static const struct dev_pm_ops mvebu_pcie_pm_ops = { |
| SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume) |
| }; |
| |
| static struct platform_driver mvebu_pcie_driver = { |
| .driver = { |
| .name = "mvebu-pcie", |
| .of_match_table = mvebu_pcie_of_match_table, |
| /* driver unloading/unbinding currently not supported */ |
| .suppress_bind_attrs = true, |
| .pm = &mvebu_pcie_pm_ops, |
| }, |
| .probe = mvebu_pcie_probe, |
| }; |
| builtin_platform_driver(mvebu_pcie_driver); |