| /* |
| * AXP20X and AXP22X PMICs' ACIN power supply driver |
| * |
| * Copyright (C) 2016 Free Electrons |
| * Quentin Schulz <quentin.schulz@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/iio/consumer.h> |
| |
| #define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7) |
| #define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6) |
| |
| #define AXP813_VHOLD_MASK GENMASK(5, 3) |
| #define AXP813_VHOLD_UV_TO_BIT(x) ((((x) / 100000) - 40) << 3) |
| #define AXP813_VHOLD_REG_TO_UV(x) \ |
| (((((x) & AXP813_VHOLD_MASK) >> 3) + 40) * 100000) |
| |
| #define AXP813_CURR_LIMIT_MASK GENMASK(2, 0) |
| #define AXP813_CURR_LIMIT_UA_TO_BIT(x) (((x) / 500000) - 3) |
| #define AXP813_CURR_LIMIT_REG_TO_UA(x) \ |
| ((((x) & AXP813_CURR_LIMIT_MASK) + 3) * 500000) |
| |
| #define DRVNAME "axp20x-ac-power-supply" |
| |
| struct axp20x_ac_power { |
| struct regmap *regmap; |
| struct power_supply *supply; |
| struct iio_channel *acin_v; |
| struct iio_channel *acin_i; |
| }; |
| |
| static irqreturn_t axp20x_ac_power_irq(int irq, void *devid) |
| { |
| struct axp20x_ac_power *power = devid; |
| |
| power_supply_changed(power->supply); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int axp20x_ac_power_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct axp20x_ac_power *power = power_supply_get_drvdata(psy); |
| int ret, reg; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); |
| if (ret) |
| return ret; |
| |
| if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) { |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| return 0; |
| } |
| |
| val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| return 0; |
| |
| case POWER_SUPPLY_PROP_PRESENT: |
| ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); |
| if (ret) |
| return ret; |
| |
| val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT); |
| return 0; |
| |
| case POWER_SUPPLY_PROP_ONLINE: |
| ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); |
| if (ret) |
| return ret; |
| |
| val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL); |
| return 0; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = iio_read_channel_processed(power->acin_v, &val->intval); |
| if (ret) |
| return ret; |
| |
| /* IIO framework gives mV but Power Supply framework gives uV */ |
| val->intval *= 1000; |
| |
| return 0; |
| |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| ret = iio_read_channel_processed(power->acin_i, &val->intval); |
| if (ret) |
| return ret; |
| |
| /* IIO framework gives mA but Power Supply framework gives uA */ |
| val->intval *= 1000; |
| |
| return 0; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, ®); |
| if (ret) |
| return ret; |
| |
| val->intval = AXP813_VHOLD_REG_TO_UV(reg); |
| |
| return 0; |
| |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, ®); |
| if (ret) |
| return ret; |
| |
| val->intval = AXP813_CURR_LIMIT_REG_TO_UA(reg); |
| /* AXP813 datasheet defines values 11x as 4000mA */ |
| if (val->intval > 4000000) |
| val->intval = 4000000; |
| |
| return 0; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp813_ac_power_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct axp20x_ac_power *power = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| if (val->intval < 4000000 || val->intval > 4700000) |
| return -EINVAL; |
| |
| return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL, |
| AXP813_VHOLD_MASK, |
| AXP813_VHOLD_UV_TO_BIT(val->intval)); |
| |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| if (val->intval < 1500000 || val->intval > 4000000) |
| return -EINVAL; |
| |
| return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL, |
| AXP813_CURR_LIMIT_MASK, |
| AXP813_CURR_LIMIT_UA_TO_BIT(val->intval)); |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp813_ac_power_prop_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN || |
| psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT; |
| } |
| |
| static enum power_supply_property axp20x_ac_power_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| }; |
| |
| static enum power_supply_property axp22x_ac_power_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static enum power_supply_property axp813_ac_power_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| }; |
| |
| static const struct power_supply_desc axp20x_ac_power_desc = { |
| .name = "axp20x-ac", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = axp20x_ac_power_properties, |
| .num_properties = ARRAY_SIZE(axp20x_ac_power_properties), |
| .get_property = axp20x_ac_power_get_property, |
| }; |
| |
| static const struct power_supply_desc axp22x_ac_power_desc = { |
| .name = "axp22x-ac", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = axp22x_ac_power_properties, |
| .num_properties = ARRAY_SIZE(axp22x_ac_power_properties), |
| .get_property = axp20x_ac_power_get_property, |
| }; |
| |
| static const struct power_supply_desc axp813_ac_power_desc = { |
| .name = "axp813-ac", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = axp813_ac_power_properties, |
| .num_properties = ARRAY_SIZE(axp813_ac_power_properties), |
| .property_is_writeable = axp813_ac_power_prop_writeable, |
| .get_property = axp20x_ac_power_get_property, |
| .set_property = axp813_ac_power_set_property, |
| }; |
| |
| struct axp_data { |
| const struct power_supply_desc *power_desc; |
| bool acin_adc; |
| }; |
| |
| static const struct axp_data axp20x_data = { |
| .power_desc = &axp20x_ac_power_desc, |
| .acin_adc = true, |
| }; |
| |
| static const struct axp_data axp22x_data = { |
| .power_desc = &axp22x_ac_power_desc, |
| .acin_adc = false, |
| }; |
| |
| static const struct axp_data axp813_data = { |
| .power_desc = &axp813_ac_power_desc, |
| .acin_adc = false, |
| }; |
| |
| static int axp20x_ac_power_probe(struct platform_device *pdev) |
| { |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| struct power_supply_config psy_cfg = {}; |
| struct axp20x_ac_power *power; |
| const struct axp_data *axp_data; |
| static const char * const irq_names[] = { "ACIN_PLUGIN", "ACIN_REMOVAL", |
| NULL }; |
| int i, irq, ret; |
| |
| if (!of_device_is_available(pdev->dev.of_node)) |
| return -ENODEV; |
| |
| if (!axp20x) { |
| dev_err(&pdev->dev, "Parent drvdata not set\n"); |
| return -EINVAL; |
| } |
| |
| power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); |
| if (!power) |
| return -ENOMEM; |
| |
| axp_data = of_device_get_match_data(&pdev->dev); |
| |
| if (axp_data->acin_adc) { |
| power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v"); |
| if (IS_ERR(power->acin_v)) { |
| if (PTR_ERR(power->acin_v) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(power->acin_v); |
| } |
| |
| power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i"); |
| if (IS_ERR(power->acin_i)) { |
| if (PTR_ERR(power->acin_i) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(power->acin_i); |
| } |
| } |
| |
| power->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| |
| platform_set_drvdata(pdev, power); |
| |
| psy_cfg.of_node = pdev->dev.of_node; |
| psy_cfg.drv_data = power; |
| |
| power->supply = devm_power_supply_register(&pdev->dev, |
| axp_data->power_desc, |
| &psy_cfg); |
| if (IS_ERR(power->supply)) |
| return PTR_ERR(power->supply); |
| |
| /* Request irqs after registering, as irqs may trigger immediately */ |
| for (i = 0; irq_names[i]; i++) { |
| irq = platform_get_irq_byname(pdev, irq_names[i]); |
| if (irq < 0) { |
| dev_warn(&pdev->dev, "No IRQ for %s: %d\n", |
| irq_names[i], irq); |
| continue; |
| } |
| irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); |
| ret = devm_request_any_context_irq(&pdev->dev, irq, |
| axp20x_ac_power_irq, 0, |
| DRVNAME, power); |
| if (ret < 0) |
| dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", |
| irq_names[i], ret); |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id axp20x_ac_power_match[] = { |
| { |
| .compatible = "x-powers,axp202-ac-power-supply", |
| .data = &axp20x_data, |
| }, { |
| .compatible = "x-powers,axp221-ac-power-supply", |
| .data = &axp22x_data, |
| }, { |
| .compatible = "x-powers,axp813-ac-power-supply", |
| .data = &axp813_data, |
| }, { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, axp20x_ac_power_match); |
| |
| static struct platform_driver axp20x_ac_power_driver = { |
| .probe = axp20x_ac_power_probe, |
| .driver = { |
| .name = DRVNAME, |
| .of_match_table = axp20x_ac_power_match, |
| }, |
| }; |
| |
| module_platform_driver(axp20x_ac_power_driver); |
| |
| MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); |
| MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver"); |
| MODULE_LICENSE("GPL"); |