| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LTRF216A Ambient Light Sensor |
| * |
| * Copyright (C) 2022 Collabora, Ltd. |
| * Author: Shreeya Patel <shreeya.patel@collabora.com> |
| * |
| * Copyright (C) 2021 Lite-On Technology Corp (Singapore) |
| * Author: Shi Zhigang <Zhigang.Shi@liteon.com> |
| * |
| * IIO driver for LTRF216A (7-bit I2C slave address 0x53). |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bits.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/iopoll.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/iio/iio.h> |
| |
| #include <asm/unaligned.h> |
| |
| #define LTRF216A_ALS_RESET_MASK BIT(4) |
| #define LTRF216A_ALS_DATA_STATUS BIT(3) |
| #define LTRF216A_ALS_ENABLE_MASK BIT(1) |
| #define LTRF216A_MAIN_CTRL 0x00 |
| #define LTRF216A_ALS_MEAS_RES 0x04 |
| #define LTRF216A_ALS_GAIN 0x05 |
| #define LTRF216A_PART_ID 0x06 |
| #define LTRF216A_MAIN_STATUS 0x07 |
| #define LTRF216A_ALS_CLEAR_DATA_0 0x0a |
| #define LTRF216A_ALS_CLEAR_DATA_1 0x0b |
| #define LTRF216A_ALS_CLEAR_DATA_2 0x0c |
| #define LTRF216A_ALS_DATA_0 0x0d |
| #define LTRF216A_ALS_DATA_1 0x0e |
| #define LTRF216A_ALS_DATA_2 0x0f |
| #define LTRF216A_INT_CFG 0x19 |
| #define LTRF216A_INT_PST 0x1a |
| #define LTRF216A_ALS_THRES_UP_0 0x21 |
| #define LTRF216A_ALS_THRES_UP_1 0x22 |
| #define LTRF216A_ALS_THRES_UP_2 0x23 |
| #define LTRF216A_ALS_THRES_LOW_0 0x24 |
| #define LTRF216A_ALS_THRES_LOW_1 0x25 |
| #define LTRF216A_ALS_THRES_LOW_2 0x26 |
| #define LTRF216A_ALS_READ_DATA_DELAY_US 20000 |
| |
| static const int ltrf216a_int_time_available[][2] = { |
| { 0, 400000 }, |
| { 0, 200000 }, |
| { 0, 100000 }, |
| { 0, 50000 }, |
| { 0, 25000 }, |
| }; |
| |
| static const int ltrf216a_int_time_reg[][2] = { |
| { 400, 0x03 }, |
| { 200, 0x13 }, |
| { 100, 0x22 }, |
| { 50, 0x31 }, |
| { 25, 0x40 }, |
| }; |
| |
| /* |
| * Window Factor is needed when the device is under Window glass |
| * with coated tinted ink. This is to compensate for the light loss |
| * due to the lower transmission rate of the window glass and helps |
| * in calculating lux. |
| */ |
| #define LTRF216A_WIN_FAC 1 |
| |
| struct ltrf216a_data { |
| struct regmap *regmap; |
| struct i2c_client *client; |
| u32 int_time; |
| u16 int_time_fac; |
| u8 als_gain_fac; |
| /* |
| * Protects regmap accesses and makes sure integration time |
| * remains constant during the measurement of lux. |
| */ |
| struct mutex lock; |
| }; |
| |
| static const struct iio_chan_spec ltrf216a_channels[] = { |
| { |
| .type = IIO_LIGHT, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_PROCESSED) | |
| BIT(IIO_CHAN_INFO_INT_TIME), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME), |
| }, |
| }; |
| |
| static void ltrf216a_reset(struct iio_dev *indio_dev) |
| { |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| |
| /* reset sensor, chip fails to respond to this, so ignore any errors */ |
| regmap_write(data->regmap, LTRF216A_MAIN_CTRL, LTRF216A_ALS_RESET_MASK); |
| |
| /* reset time */ |
| usleep_range(1000, 2000); |
| } |
| |
| static int ltrf216a_enable(struct iio_dev *indio_dev) |
| { |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| struct device *dev = &data->client->dev; |
| int ret; |
| |
| /* enable sensor */ |
| ret = regmap_set_bits(data->regmap, |
| LTRF216A_MAIN_CTRL, LTRF216A_ALS_ENABLE_MASK); |
| if (ret) { |
| dev_err(dev, "failed to enable sensor: %d\n", ret); |
| return ret; |
| } |
| |
| /* sleep for one integration cycle after enabling the device */ |
| msleep(ltrf216a_int_time_reg[0][0]); |
| |
| return 0; |
| } |
| |
| static int ltrf216a_disable(struct iio_dev *indio_dev) |
| { |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| struct device *dev = &data->client->dev; |
| int ret; |
| |
| ret = regmap_write(data->regmap, LTRF216A_MAIN_CTRL, 0); |
| if (ret) |
| dev_err(dev, "failed to disable sensor: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void ltrf216a_cleanup(void *data) |
| { |
| struct iio_dev *indio_dev = data; |
| |
| ltrf216a_disable(indio_dev); |
| } |
| |
| static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime) |
| { |
| struct device *dev = &data->client->dev; |
| unsigned int i; |
| u8 reg_val; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) { |
| if (ltrf216a_int_time_available[i][1] == itime) |
| break; |
| } |
| if (i == ARRAY_SIZE(ltrf216a_int_time_available)) |
| return -EINVAL; |
| |
| reg_val = ltrf216a_int_time_reg[i][1]; |
| |
| ret = regmap_write(data->regmap, LTRF216A_ALS_MEAS_RES, reg_val); |
| if (ret) { |
| dev_err(dev, "failed to set integration time: %d\n", ret); |
| return ret; |
| } |
| |
| data->int_time_fac = ltrf216a_int_time_reg[i][0]; |
| data->int_time = itime; |
| |
| return 0; |
| } |
| |
| static int ltrf216a_get_int_time(struct ltrf216a_data *data, |
| int *val, int *val2) |
| { |
| *val = 0; |
| *val2 = data->int_time; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int ltrf216a_set_power_state(struct ltrf216a_data *data, bool on) |
| { |
| struct device *dev = &data->client->dev; |
| int ret = 0; |
| |
| if (on) { |
| ret = pm_runtime_resume_and_get(dev); |
| if (ret) { |
| dev_err(dev, "failed to resume runtime PM: %d\n", ret); |
| return ret; |
| } |
| } else { |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_put_autosuspend(dev); |
| } |
| |
| return ret; |
| } |
| |
| static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr) |
| { |
| struct device *dev = &data->client->dev; |
| int ret, val; |
| u8 buf[3]; |
| |
| ret = regmap_read_poll_timeout(data->regmap, LTRF216A_MAIN_STATUS, |
| val, val & LTRF216A_ALS_DATA_STATUS, |
| LTRF216A_ALS_READ_DATA_DELAY_US, |
| LTRF216A_ALS_READ_DATA_DELAY_US * 50); |
| if (ret) { |
| dev_err(dev, "failed to wait for measurement data: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_bulk_read(data->regmap, addr, buf, sizeof(buf)); |
| if (ret) { |
| dev_err(dev, "failed to read measurement data: %d\n", ret); |
| return ret; |
| } |
| |
| return get_unaligned_le24(&buf[0]); |
| } |
| |
| static int ltrf216a_get_lux(struct ltrf216a_data *data) |
| { |
| int ret, greendata; |
| u64 lux, div; |
| |
| ret = ltrf216a_set_power_state(data, true); |
| if (ret) |
| return ret; |
| |
| greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); |
| if (greendata < 0) |
| return greendata; |
| |
| ltrf216a_set_power_state(data, false); |
| |
| lux = greendata * 45 * LTRF216A_WIN_FAC * 100; |
| div = data->als_gain_fac * data->int_time_fac * 100; |
| |
| return div_u64(lux, div); |
| } |
| |
| static int ltrf216a_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = ltrf216a_set_power_state(data, true); |
| if (ret) |
| return ret; |
| mutex_lock(&data->lock); |
| ret = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); |
| mutex_unlock(&data->lock); |
| ltrf216a_set_power_state(data, false); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_PROCESSED: |
| mutex_lock(&data->lock); |
| ret = ltrf216a_get_lux(data); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_INT_TIME: |
| mutex_lock(&data->lock); |
| ret = ltrf216a_get_int_time(data, val, val2); |
| mutex_unlock(&data->lock); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltrf216a_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long mask) |
| { |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_INT_TIME: |
| if (val != 0) |
| return -EINVAL; |
| mutex_lock(&data->lock); |
| ret = ltrf216a_set_int_time(data, val2); |
| mutex_unlock(&data->lock); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltrf216a_read_available(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_INT_TIME: |
| *length = ARRAY_SIZE(ltrf216a_int_time_available) * 2; |
| *vals = (const int *)ltrf216a_int_time_available; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| return IIO_AVAIL_LIST; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info ltrf216a_info = { |
| .read_raw = ltrf216a_read_raw, |
| .write_raw = ltrf216a_write_raw, |
| .read_avail = ltrf216a_read_available, |
| }; |
| |
| static bool ltrf216a_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LTRF216A_MAIN_CTRL: |
| case LTRF216A_ALS_MEAS_RES: |
| case LTRF216A_ALS_GAIN: |
| case LTRF216A_PART_ID: |
| case LTRF216A_MAIN_STATUS: |
| case LTRF216A_ALS_CLEAR_DATA_0: |
| case LTRF216A_ALS_CLEAR_DATA_1: |
| case LTRF216A_ALS_CLEAR_DATA_2: |
| case LTRF216A_ALS_DATA_0: |
| case LTRF216A_ALS_DATA_1: |
| case LTRF216A_ALS_DATA_2: |
| case LTRF216A_INT_CFG: |
| case LTRF216A_INT_PST: |
| case LTRF216A_ALS_THRES_UP_0: |
| case LTRF216A_ALS_THRES_UP_1: |
| case LTRF216A_ALS_THRES_UP_2: |
| case LTRF216A_ALS_THRES_LOW_0: |
| case LTRF216A_ALS_THRES_LOW_1: |
| case LTRF216A_ALS_THRES_LOW_2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ltrf216a_writable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LTRF216A_MAIN_CTRL: |
| case LTRF216A_ALS_MEAS_RES: |
| case LTRF216A_ALS_GAIN: |
| case LTRF216A_INT_CFG: |
| case LTRF216A_INT_PST: |
| case LTRF216A_ALS_THRES_UP_0: |
| case LTRF216A_ALS_THRES_UP_1: |
| case LTRF216A_ALS_THRES_UP_2: |
| case LTRF216A_ALS_THRES_LOW_0: |
| case LTRF216A_ALS_THRES_LOW_1: |
| case LTRF216A_ALS_THRES_LOW_2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ltrf216a_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LTRF216A_MAIN_STATUS: |
| case LTRF216A_ALS_CLEAR_DATA_0: |
| case LTRF216A_ALS_CLEAR_DATA_1: |
| case LTRF216A_ALS_CLEAR_DATA_2: |
| case LTRF216A_ALS_DATA_0: |
| case LTRF216A_ALS_DATA_1: |
| case LTRF216A_ALS_DATA_2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ltrf216a_precious_reg(struct device *dev, unsigned int reg) |
| { |
| return reg == LTRF216A_MAIN_STATUS; |
| } |
| |
| static const struct regmap_config ltrf216a_regmap_config = { |
| .name = "ltrf216a", |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = LTRF216A_ALS_THRES_LOW_2, |
| .readable_reg = ltrf216a_readable_reg, |
| .writeable_reg = ltrf216a_writable_reg, |
| .volatile_reg = ltrf216a_volatile_reg, |
| .precious_reg = ltrf216a_precious_reg, |
| .disable_locking = true, |
| }; |
| |
| static int ltrf216a_probe(struct i2c_client *client) |
| { |
| struct ltrf216a_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| |
| data->regmap = devm_regmap_init_i2c(client, <rf216a_regmap_config); |
| if (IS_ERR(data->regmap)) |
| return dev_err_probe(&client->dev, PTR_ERR(data->regmap), |
| "regmap initialization failed\n"); |
| |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| |
| mutex_init(&data->lock); |
| |
| indio_dev->info = <rf216a_info; |
| indio_dev->name = "ltrf216a"; |
| indio_dev->channels = ltrf216a_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| ret = pm_runtime_set_active(&client->dev); |
| if (ret) |
| return ret; |
| |
| /* reset sensor, chip fails to respond to this, so ignore any errors */ |
| ltrf216a_reset(indio_dev); |
| |
| ret = regmap_reinit_cache(data->regmap, <rf216a_regmap_config); |
| if (ret) |
| return dev_err_probe(&client->dev, ret, |
| "failed to reinit regmap cache\n"); |
| |
| ret = ltrf216a_enable(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&client->dev, ltrf216a_cleanup, |
| indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = devm_pm_runtime_enable(&client->dev); |
| if (ret) |
| return dev_err_probe(&client->dev, ret, |
| "failed to enable runtime PM\n"); |
| |
| pm_runtime_set_autosuspend_delay(&client->dev, 1000); |
| pm_runtime_use_autosuspend(&client->dev); |
| |
| data->int_time = 100000; |
| data->int_time_fac = 100; |
| data->als_gain_fac = 3; |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static int ltrf216a_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = ltrf216a_disable(indio_dev); |
| if (ret) |
| return ret; |
| |
| regcache_cache_only(data->regmap, true); |
| |
| return 0; |
| } |
| |
| static int ltrf216a_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ltrf216a_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| regcache_cache_only(data->regmap, false); |
| regcache_mark_dirty(data->regmap); |
| ret = regcache_sync(data->regmap); |
| if (ret) |
| goto cache_only; |
| |
| ret = ltrf216a_enable(indio_dev); |
| if (ret) |
| goto cache_only; |
| |
| return 0; |
| |
| cache_only: |
| regcache_cache_only(data->regmap, true); |
| |
| return ret; |
| } |
| |
| static DEFINE_RUNTIME_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_runtime_suspend, |
| ltrf216a_runtime_resume, NULL); |
| |
| static const struct i2c_device_id ltrf216a_id[] = { |
| { "ltrf216a" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltrf216a_id); |
| |
| static const struct of_device_id ltrf216a_of_match[] = { |
| { .compatible = "liteon,ltrf216a" }, |
| { .compatible = "ltr,ltrf216a" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, ltrf216a_of_match); |
| |
| static struct i2c_driver ltrf216a_driver = { |
| .driver = { |
| .name = "ltrf216a", |
| .pm = pm_ptr(<rf216a_pm_ops), |
| .of_match_table = ltrf216a_of_match, |
| }, |
| .probe = ltrf216a_probe, |
| .id_table = ltrf216a_id, |
| }; |
| module_i2c_driver(ltrf216a_driver); |
| |
| MODULE_AUTHOR("Shreeya Patel <shreeya.patel@collabora.com>"); |
| MODULE_AUTHOR("Shi Zhigang <Zhigang.Shi@liteon.com>"); |
| MODULE_DESCRIPTION("LTRF216A ambient light sensor driver"); |
| MODULE_LICENSE("GPL"); |