arch/arm/mm/cache-v6.S - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/mm/cache-v6.S
  *
  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
  *
  *  This is the "shell" of the ARMv6 processor support.
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/unwind.h>

 #include "proc-macros.S"

 #define HARVARD_CACHE
 #define CACHE_LINE_SIZE		32
 #define D_CACHE_LINE_SIZE	32
 #define BTB_FLUSH_SIZE		8

 .arch armv6

 /*
  *	v6_flush_icache_all()
  *
  *	Flush the whole I-cache.
  *
  *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
  *	This erratum is present in 1136, 1156 and 1176. It does not affect the
  *	MPCore.
  *
  *	Registers:
  *	r0 - set to 0
  *	r1 - corrupted
  */
 ENTRY(v6_flush_icache_all)
 	mov	r0, #0
 #ifdef CONFIG_ARM_ERRATA_411920
 	mrs	r1, cpsr
 	cpsid	ifa				@ disable interrupts
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
 	msr	cpsr_cx, r1			@ restore interrupts
 	.rept	11				@ ARM Ltd recommends at least
 	nop					@ 11 NOPs
 	.endr
 #else
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
 #endif
 	ret	lr
 ENDPROC(v6_flush_icache_all)

 /*
  *	v6_flush_cache_all()
  *
  *	Flush the entire cache.
  *
  *	It is assumed that:
  */
 ENTRY(v6_flush_kern_cache_all)
 	mov	r0, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
 	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
 #endif
 	ret	lr

 /*
  *	v6_flush_cache_all()
  *
  *	Flush all TLB entries in a particular address space
  *
  *	- mm    - mm_struct describing address space
  */
 ENTRY(v6_flush_user_cache_all)
 	/*FALLTHROUGH*/

 /*
  *	v6_flush_cache_range(start, end, flags)
  *
  *	Flush a range of TLB entries in the specified address space.
  *
  *	- start - start address (may not be aligned)
  *	- end   - end address (exclusive, may not be aligned)
  *	- flags	- vm_area_struct flags describing address space
  *
  *	It is assumed that:
  *	- we have a VIPT cache.
  */
 ENTRY(v6_flush_user_cache_range)
 	ret	lr

 /*
  *	v6_coherent_kern_range(start,end)
  *
  *	Ensure that the I and D caches are coherent within specified
  *	region.  This is typically used when code has been written to
  *	a memory region, and will be executed.
  *
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  *
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_kern_range)
 	/* FALLTHROUGH */

 /*
  *	v6_coherent_user_range(start,end)
  *
  *	Ensure that the I and D caches are coherent within specified
  *	region.  This is typically used when code has been written to
  *	a memory region, and will be executed.
  *
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  *
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
  UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
 1:
  USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
 	cmp	r0, r1
 	blo	1b
 #endif
 	mov	r0, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
 	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
 #endif
 	ret	lr

 /*
  * Fault handling for the cache operation above. If the virtual address in r0
  * isn't mapped, fail with -EFAULT.
  */
 9001:
 	mov	r0, #-EFAULT
 	ret	lr
  UNWIND(.fnend		)
 ENDPROC(v6_coherent_user_range)
 ENDPROC(v6_coherent_kern_range)

 /*
  *	v6_flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure that the data held in the page kaddr is written back
  *	to the page in question.
  *
  *	- addr	- kernel address
  *	- size	- region size
  */
 ENTRY(v6_flush_kern_dcache_area)
 	add	r1, r0, r1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
 	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate unified line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
 	blo	1b
 #ifdef HARVARD_CACHE
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4
 #endif
 	ret	lr


 /*
  *	v6_dma_inv_range(start,end)
  *
  *	Invalidate the data cache within the specified region; we will
  *	be performing a DMA operation in this region and we want to
  *	purge old data in the cache.
  *
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldrb	r2, [r0]			@ read for ownership
 	strb	r2, [r0]			@ write for ownership
 #endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldrbne	r2, [r1, #-1]			@ read for ownership
 	strbne	r2, [r1, #-1]			@ write for ownership
 #endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
 #else
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
 	mcr	p15, 0, r0, c7, c7, 1		@ invalidate unified line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldrlo	r2, [r0]			@ read for ownership
 	strlo	r2, [r0]			@ write for ownership
 #endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr

 /*
  *	v6_dma_clean_range(start,end)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
 	mcr	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr

 /*
  *	v6_dma_flush_range(start,end)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldrb	r2, [r0]		@ read for ownership
 	strb	r2, [r0]		@ write for ownership
 #endif
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
 	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
 #ifdef CONFIG_DMA_CACHE_RWFO
 	ldrblo	r2, [r0]			@ read for ownership
 	strblo	r2, [r0]			@ write for ownership
 #endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr

 /*
  *	dma_map_area(start, size, dir)
  *	- start	- kernel virtual start address
  *	- size	- size of region
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
 #ifndef CONFIG_DMA_CACHE_RWFO
 	b	v6_dma_clean_range
 #else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
 #endif
 ENDPROC(v6_dma_map_area)

 /*
  *	dma_unmap_area(start, size, dir)
  *	- start	- kernel virtual start address
  *	- size	- size of region
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
 #ifndef CONFIG_DMA_CACHE_RWFO
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v6_dma_inv_range
 #endif
 	ret	lr
 ENDPROC(v6_dma_unmap_area)

 	.globl	v6_flush_kern_cache_louis
 	.equ	v6_flush_kern_cache_louis, v6_flush_kern_cache_all

 	__INITDATA

 	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
 	define_cache_functions v6
	/* SPDX-License-Identifier: GPL-2.0-only */
	/*
	* linux/arch/arm/mm/cache-v6.S
	*
	* Copyright (C) 2001 Deep Blue Solutions Ltd.
	*
	* This is the "shell" of the ARMv6 processor support.
	*/
	#include <linux/linkage.h>
	#include <linux/init.h>
	#include <asm/assembler.h>
	#include <asm/errno.h>
	#include <asm/unwind.h>

	#include "proc-macros.S"

	#define HARVARD_CACHE
	#define CACHE_LINE_SIZE 32
	#define D_CACHE_LINE_SIZE 32
	#define BTB_FLUSH_SIZE 8

	.arch armv6

	/*
	* v6_flush_icache_all()
	*
	* Flush the whole I-cache.
	*
	* ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
	* This erratum is present in 1136, 1156 and 1176. It does not affect the
	* MPCore.
	*
	* Registers:
	* r0 - set to 0
	* r1 - corrupted
	*/
	ENTRY(v6_flush_icache_all)
	mov r0, #0
	#ifdef CONFIG_ARM_ERRATA_411920
	mrs r1, cpsr
	cpsid ifa @ disable interrupts
	mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
	mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
	mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
	mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
	msr cpsr_cx, r1 @ restore interrupts
	.rept 11 @ ARM Ltd recommends at least
	nop @ 11 NOPs
	.endr
	#else
	mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache
	#endif
	ret lr
	ENDPROC(v6_flush_icache_all)

	/*
	* v6_flush_cache_all()
	*
	* Flush the entire cache.
	*
	* It is assumed that:
	*/
	ENTRY(v6_flush_kern_cache_all)
	mov r0, #0
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
	#ifndef CONFIG_ARM_ERRATA_411920
	mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
	#else
	b v6_flush_icache_all
	#endif
	#else
	mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
	#endif
	ret lr

	/*
	* v6_flush_cache_all()
	*
	* Flush all TLB entries in a particular address space
	*
	* - mm - mm_struct describing address space
	*/
	ENTRY(v6_flush_user_cache_all)
	/FALLTHROUGH/

	/*
	* v6_flush_cache_range(start, end, flags)
	*
	* Flush a range of TLB entries in the specified address space.
	*
	* - start - start address (may not be aligned)
	* - end - end address (exclusive, may not be aligned)
	* - flags - vm_area_struct flags describing address space
	*
	* It is assumed that:
	* - we have a VIPT cache.
	*/
	ENTRY(v6_flush_user_cache_range)
	ret lr

	/*
	* v6_coherent_kern_range(start,end)
	*
	* Ensure that the I and D caches are coherent within specified
	* region. This is typically used when code has been written to
	* a memory region, and will be executed.
	*
	* - start - virtual start address of region
	* - end - virtual end address of region
	*
	* It is assumed that:
	* - the Icache does not read data from the write buffer
	*/
	ENTRY(v6_coherent_kern_range)
	/* FALLTHROUGH */

	/*
	* v6_coherent_user_range(start,end)
	*
	* Ensure that the I and D caches are coherent within specified
	* region. This is typically used when code has been written to
	* a memory region, and will be executed.
	*
	* - start - virtual start address of region
	* - end - virtual end address of region
	*
	* It is assumed that:
	* - the Icache does not read data from the write buffer
	*/
	ENTRY(v6_coherent_user_range)
	UNWIND(.fnstart )
	#ifdef HARVARD_CACHE
	bic r0, r0, #CACHE_LINE_SIZE - 1
	1:
	USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line
	add r0, r0, #CACHE_LINE_SIZE
	cmp r0, r1
	blo 1b
	#endif
	mov r0, #0
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
	#ifndef CONFIG_ARM_ERRATA_411920
	mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
	#else
	b v6_flush_icache_all
	#endif
	#else
	mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
	#endif
	ret lr

	/*
	* Fault handling for the cache operation above. If the virtual address in r0
	* isn't mapped, fail with -EFAULT.
	*/
	9001:
	mov r0, #-EFAULT
	ret lr
	UNWIND(.fnend )
	ENDPROC(v6_coherent_user_range)
	ENDPROC(v6_coherent_kern_range)

	/*
	* v6_flush_kern_dcache_area(void *addr, size_t size)
	*
	* Ensure that the data held in the page kaddr is written back
	* to the page in question.
	*
	* - addr - kernel address
	* - size - region size
	*/
	ENTRY(v6_flush_kern_dcache_area)
	add r1, r0, r1
	bic r0, r0, #D_CACHE_LINE_SIZE - 1
	1:
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
	#else
	mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate unified line
	#endif
	add r0, r0, #D_CACHE_LINE_SIZE
	cmp r0, r1
	blo 1b
	#ifdef HARVARD_CACHE
	mov r0, #0
	mcr p15, 0, r0, c7, c10, 4
	#endif
	ret lr


	/*
	* v6_dma_inv_range(start,end)
	*
	* Invalidate the data cache within the specified region; we will
	* be performing a DMA operation in this region and we want to
	* purge old data in the cache.
	*
	* - start - virtual start address of region
	* - end - virtual end address of region
	*/
	v6_dma_inv_range:
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldrb r2, [r0] @ read for ownership
	strb r2, [r0] @ write for ownership
	#endif
	tst r0, #D_CACHE_LINE_SIZE - 1
	bic r0, r0, #D_CACHE_LINE_SIZE - 1
	#ifdef HARVARD_CACHE
	mcrne p15, 0, r0, c7, c10, 1 @ clean D line
	#else
	mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
	#endif
	tst r1, #D_CACHE_LINE_SIZE - 1
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldrbne r2, [r1, #-1] @ read for ownership
	strbne r2, [r1, #-1] @ write for ownership
	#endif
	bic r1, r1, #D_CACHE_LINE_SIZE - 1
	#ifdef HARVARD_CACHE
	mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
	#else
	mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
	#endif
	1:
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
	#else
	mcr p15, 0, r0, c7, c7, 1 @ invalidate unified line
	#endif
	add r0, r0, #D_CACHE_LINE_SIZE
	cmp r0, r1
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldrlo r2, [r0] @ read for ownership
	strlo r2, [r0] @ write for ownership
	#endif
	blo 1b
	mov r0, #0
	mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
	ret lr

	/*
	* v6_dma_clean_range(start,end)
	* - start - virtual start address of region
	* - end - virtual end address of region
	*/
	v6_dma_clean_range:
	bic r0, r0, #D_CACHE_LINE_SIZE - 1
	1:
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldr r2, [r0] @ read for ownership
	#endif
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c10, 1 @ clean D line
	#else
	mcr p15, 0, r0, c7, c11, 1 @ clean unified line
	#endif
	add r0, r0, #D_CACHE_LINE_SIZE
	cmp r0, r1
	blo 1b
	mov r0, #0
	mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
	ret lr

	/*
	* v6_dma_flush_range(start,end)
	* - start - virtual start address of region
	* - end - virtual end address of region
	*/
	ENTRY(v6_dma_flush_range)
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldrb r2, [r0] @ read for ownership
	strb r2, [r0] @ write for ownership
	#endif
	bic r0, r0, #D_CACHE_LINE_SIZE - 1
	1:
	#ifdef HARVARD_CACHE
	mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
	#else
	mcr p15, 0, r0, c7, c15, 1 @ clean & invalidate line
	#endif
	add r0, r0, #D_CACHE_LINE_SIZE
	cmp r0, r1
	#ifdef CONFIG_DMA_CACHE_RWFO
	ldrblo r2, [r0] @ read for ownership
	strblo r2, [r0] @ write for ownership
	#endif
	blo 1b
	mov r0, #0
	mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
	ret lr

	/*
	* dma_map_area(start, size, dir)
	* - start - kernel virtual start address
	* - size - size of region
	* - dir - DMA direction
	*/
	ENTRY(v6_dma_map_area)
	add r1, r1, r0
	teq r2, #DMA_FROM_DEVICE
	beq v6_dma_inv_range
	#ifndef CONFIG_DMA_CACHE_RWFO
	b v6_dma_clean_range
	#else
	teq r2, #DMA_TO_DEVICE
	beq v6_dma_clean_range
	b v6_dma_flush_range
	#endif
	ENDPROC(v6_dma_map_area)

	/*
	* dma_unmap_area(start, size, dir)
	* - start - kernel virtual start address
	* - size - size of region
	* - dir - DMA direction
	*/
	ENTRY(v6_dma_unmap_area)
	#ifndef CONFIG_DMA_CACHE_RWFO
	add r1, r1, r0
	teq r2, #DMA_TO_DEVICE
	bne v6_dma_inv_range
	#endif
	ret lr
	ENDPROC(v6_dma_unmap_area)

	.globl v6_flush_kern_cache_louis
	.equ v6_flush_kern_cache_louis, v6_flush_kern_cache_all

	__INITDATA

	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
	define_cache_functions v6