| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * IO definitions for the Hexagon architecture |
| * |
| * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. |
| */ |
| |
| #ifndef _ASM_IO_H |
| #define _ASM_IO_H |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/types.h> |
| #include <asm/iomap.h> |
| #include <asm/page.h> |
| #include <asm/cacheflush.h> |
| |
| /* |
| * We don't have PCI yet. |
| * _IO_BASE is pointing at what should be unused virtual space. |
| */ |
| #define IO_SPACE_LIMIT 0xffff |
| #define _IO_BASE ((void __iomem *)0xfe000000) |
| |
| #define IOMEM(x) ((void __force __iomem *)(x)) |
| |
| extern int remap_area_pages(unsigned long start, unsigned long phys_addr, |
| unsigned long end, unsigned long flags); |
| |
| /* Defined in lib/io.c, needed for smc91x driver. */ |
| extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); |
| extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); |
| |
| extern void __raw_readsl(const void __iomem *addr, void *data, int wordlen); |
| extern void __raw_writesl(void __iomem *addr, const void *data, int wordlen); |
| |
| #define readsw(p, d, l) __raw_readsw(p, d, l) |
| #define writesw(p, d, l) __raw_writesw(p, d, l) |
| |
| #define readsl(p, d, l) __raw_readsl(p, d, l) |
| #define writesl(p, d, l) __raw_writesl(p, d, l) |
| |
| /* |
| * virt_to_phys - map virtual address to physical |
| * @address: address to map |
| */ |
| static inline unsigned long virt_to_phys(volatile void *address) |
| { |
| return __pa(address); |
| } |
| |
| /* |
| * phys_to_virt - map physical address to virtual |
| * @address: address to map |
| */ |
| static inline void *phys_to_virt(unsigned long address) |
| { |
| return __va(address); |
| } |
| |
| /* |
| * convert a physical pointer to a virtual kernel pointer for |
| * /dev/mem access. |
| */ |
| #define xlate_dev_mem_ptr(p) __va(p) |
| |
| /* |
| * IO port access primitives. Hexagon doesn't have special IO access |
| * instructions; all I/O is memory mapped. |
| * |
| * in/out are used for "ports", but we don't have "port instructions", |
| * so these are really just memory mapped too. |
| */ |
| |
| /* |
| * readb - read byte from memory mapped device |
| * @addr: pointer to memory |
| * |
| * Operates on "I/O bus memory space" |
| */ |
| static inline u8 readb(const volatile void __iomem *addr) |
| { |
| u8 val; |
| asm volatile( |
| "%0 = memb(%1);" |
| : "=&r" (val) |
| : "r" (addr) |
| ); |
| return val; |
| } |
| |
| static inline u16 readw(const volatile void __iomem *addr) |
| { |
| u16 val; |
| asm volatile( |
| "%0 = memh(%1);" |
| : "=&r" (val) |
| : "r" (addr) |
| ); |
| return val; |
| } |
| |
| static inline u32 readl(const volatile void __iomem *addr) |
| { |
| u32 val; |
| asm volatile( |
| "%0 = memw(%1);" |
| : "=&r" (val) |
| : "r" (addr) |
| ); |
| return val; |
| } |
| |
| /* |
| * writeb - write a byte to a memory location |
| * @data: data to write to |
| * @addr: pointer to memory |
| * |
| */ |
| static inline void writeb(u8 data, volatile void __iomem *addr) |
| { |
| asm volatile( |
| "memb(%0) = %1;" |
| : |
| : "r" (addr), "r" (data) |
| : "memory" |
| ); |
| } |
| |
| static inline void writew(u16 data, volatile void __iomem *addr) |
| { |
| asm volatile( |
| "memh(%0) = %1;" |
| : |
| : "r" (addr), "r" (data) |
| : "memory" |
| ); |
| |
| } |
| |
| static inline void writel(u32 data, volatile void __iomem *addr) |
| { |
| asm volatile( |
| "memw(%0) = %1;" |
| : |
| : "r" (addr), "r" (data) |
| : "memory" |
| ); |
| } |
| |
| #define __raw_writeb writeb |
| #define __raw_writew writew |
| #define __raw_writel writel |
| |
| #define __raw_readb readb |
| #define __raw_readw readw |
| #define __raw_readl readl |
| |
| /* |
| * http://comments.gmane.org/gmane.linux.ports.arm.kernel/117626 |
| */ |
| |
| #define readb_relaxed __raw_readb |
| #define readw_relaxed __raw_readw |
| #define readl_relaxed __raw_readl |
| |
| #define writeb_relaxed __raw_writeb |
| #define writew_relaxed __raw_writew |
| #define writel_relaxed __raw_writel |
| |
| /* |
| * I/O memory mapping functions. |
| */ |
| #define _PAGE_IOREMAP (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ |
| (__HEXAGON_C_DEV << 6)) |
| |
| #define ioremap_uc(addr, size) ioremap((addr), (size)) |
| |
| |
| #define __raw_writel writel |
| |
| static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, |
| int count) |
| { |
| memcpy(dst, (void *) src, count); |
| } |
| |
| static inline void memcpy_toio(volatile void __iomem *dst, const void *src, |
| int count) |
| { |
| memcpy((void *) dst, src, count); |
| } |
| |
| static inline void memset_io(volatile void __iomem *addr, int value, |
| size_t size) |
| { |
| memset((void __force *)addr, value, size); |
| } |
| |
| #define PCI_IO_ADDR (volatile void __iomem *) |
| |
| /* |
| * inb - read byte from I/O port or something |
| * @port: address in I/O space |
| * |
| * Operates on "I/O bus I/O space" |
| */ |
| static inline u8 inb(unsigned long port) |
| { |
| return readb(_IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| static inline u16 inw(unsigned long port) |
| { |
| return readw(_IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| static inline u32 inl(unsigned long port) |
| { |
| return readl(_IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| /* |
| * outb - write a byte to a memory location |
| * @data: data to write to |
| * @addr: address in I/O space |
| */ |
| static inline void outb(u8 data, unsigned long port) |
| { |
| writeb(data, _IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| static inline void outw(u16 data, unsigned long port) |
| { |
| writew(data, _IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| static inline void outl(u32 data, unsigned long port) |
| { |
| writel(data, _IO_BASE + (port & IO_SPACE_LIMIT)); |
| } |
| |
| #define outb_p outb |
| #define outw_p outw |
| #define outl_p outl |
| |
| #define inb_p inb |
| #define inw_p inw |
| #define inl_p inl |
| |
| static inline void insb(unsigned long port, void *buffer, int count) |
| { |
| if (count) { |
| u8 *buf = buffer; |
| do { |
| u8 x = inb(port); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void insw(unsigned long port, void *buffer, int count) |
| { |
| if (count) { |
| u16 *buf = buffer; |
| do { |
| u16 x = inw(port); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void insl(unsigned long port, void *buffer, int count) |
| { |
| if (count) { |
| u32 *buf = buffer; |
| do { |
| u32 x = inw(port); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void outsb(unsigned long port, const void *buffer, int count) |
| { |
| if (count) { |
| const u8 *buf = buffer; |
| do { |
| outb(*buf++, port); |
| } while (--count); |
| } |
| } |
| |
| static inline void outsw(unsigned long port, const void *buffer, int count) |
| { |
| if (count) { |
| const u16 *buf = buffer; |
| do { |
| outw(*buf++, port); |
| } while (--count); |
| } |
| } |
| |
| static inline void outsl(unsigned long port, const void *buffer, int count) |
| { |
| if (count) { |
| const u32 *buf = buffer; |
| do { |
| outl(*buf++, port); |
| } while (--count); |
| } |
| } |
| |
| /* |
| * These defines are necessary to use the generic io.h for filling in |
| * the missing parts of the API contract. This is because the platform |
| * uses (inline) functions rather than defines and the generic helper |
| * fills in the undefined. |
| */ |
| #define virt_to_phys virt_to_phys |
| #define phys_to_virt phys_to_virt |
| #define memset_io memset_io |
| #define memcpy_fromio memcpy_fromio |
| #define memcpy_toio memcpy_toio |
| #define readb readb |
| #define readw readw |
| #define readl readl |
| #define writeb writeb |
| #define writew writew |
| #define writel writel |
| #define insb insb |
| #define insw insw |
| #define insl insl |
| #define outsb outsb |
| #define outsw outsw |
| #define outsl outsl |
| #include <asm-generic/io.h> |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif |