| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2006 Jake Moilanen <moilanen@austin.ibm.com>, IBM Corp. |
| * Copyright 2006-2007 Michael Ellerman, IBM Corp. |
| */ |
| |
| #include <linux/crash_dump.h> |
| #include <linux/device.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/msi.h> |
| |
| #include <asm/rtas.h> |
| #include <asm/hw_irq.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/machdep.h> |
| #include <asm/xive.h> |
| |
| #include "pseries.h" |
| |
| static int query_token, change_token; |
| |
| #define RTAS_QUERY_FN 0 |
| #define RTAS_CHANGE_FN 1 |
| #define RTAS_RESET_FN 2 |
| #define RTAS_CHANGE_MSI_FN 3 |
| #define RTAS_CHANGE_MSIX_FN 4 |
| #define RTAS_CHANGE_32MSI_FN 5 |
| |
| /* RTAS Helpers */ |
| |
| static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) |
| { |
| u32 addr, seq_num, rtas_ret[3]; |
| unsigned long buid; |
| int rc; |
| |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); |
| buid = pdn->phb->buid; |
| |
| seq_num = 1; |
| do { |
| if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN || |
| func == RTAS_CHANGE_32MSI_FN) |
| rc = rtas_call(change_token, 6, 4, rtas_ret, addr, |
| BUID_HI(buid), BUID_LO(buid), |
| func, num_irqs, seq_num); |
| else |
| rc = rtas_call(change_token, 6, 3, rtas_ret, addr, |
| BUID_HI(buid), BUID_LO(buid), |
| func, num_irqs, seq_num); |
| |
| seq_num = rtas_ret[1]; |
| } while (rtas_busy_delay(rc)); |
| |
| /* |
| * If the RTAS call succeeded, return the number of irqs allocated. |
| * If not, make sure we return a negative error code. |
| */ |
| if (rc == 0) |
| rc = rtas_ret[0]; |
| else if (rc > 0) |
| rc = -rc; |
| |
| pr_debug("rtas_msi: ibm,change_msi(func=%d,num=%d), got %d rc = %d\n", |
| func, num_irqs, rtas_ret[0], rc); |
| |
| return rc; |
| } |
| |
| static void rtas_disable_msi(struct pci_dev *pdev) |
| { |
| struct pci_dn *pdn; |
| |
| pdn = pci_get_pdn(pdev); |
| if (!pdn) |
| return; |
| |
| /* |
| * disabling MSI with the explicit interface also disables MSI-X |
| */ |
| if (rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, 0) != 0) { |
| /* |
| * may have failed because explicit interface is not |
| * present |
| */ |
| if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0) { |
| pr_debug("rtas_msi: Setting MSIs to 0 failed!\n"); |
| } |
| } |
| } |
| |
| static int rtas_query_irq_number(struct pci_dn *pdn, int offset) |
| { |
| u32 addr, rtas_ret[2]; |
| unsigned long buid; |
| int rc; |
| |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); |
| buid = pdn->phb->buid; |
| |
| do { |
| rc = rtas_call(query_token, 4, 3, rtas_ret, addr, |
| BUID_HI(buid), BUID_LO(buid), offset); |
| } while (rtas_busy_delay(rc)); |
| |
| if (rc) { |
| pr_debug("rtas_msi: error (%d) querying source number\n", rc); |
| return rc; |
| } |
| |
| return rtas_ret[0]; |
| } |
| |
| static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) |
| { |
| struct device_node *dn; |
| const __be32 *p; |
| u32 req_msi; |
| |
| dn = pci_device_to_OF_node(pdev); |
| |
| p = of_get_property(dn, prop_name, NULL); |
| if (!p) { |
| pr_debug("rtas_msi: No %s on %pOF\n", prop_name, dn); |
| return -ENOENT; |
| } |
| |
| req_msi = be32_to_cpup(p); |
| if (req_msi < nvec) { |
| pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); |
| |
| if (req_msi == 0) /* Be paranoid */ |
| return -ENOSPC; |
| |
| return req_msi; |
| } |
| |
| return 0; |
| } |
| |
| static int check_req_msi(struct pci_dev *pdev, int nvec) |
| { |
| return check_req(pdev, nvec, "ibm,req#msi"); |
| } |
| |
| static int check_req_msix(struct pci_dev *pdev, int nvec) |
| { |
| return check_req(pdev, nvec, "ibm,req#msi-x"); |
| } |
| |
| /* Quota calculation */ |
| |
| static struct device_node *__find_pe_total_msi(struct device_node *node, int *total) |
| { |
| struct device_node *dn; |
| const __be32 *p; |
| |
| dn = of_node_get(node); |
| while (dn) { |
| p = of_get_property(dn, "ibm,pe-total-#msi", NULL); |
| if (p) { |
| pr_debug("rtas_msi: found prop on dn %pOF\n", |
| dn); |
| *total = be32_to_cpup(p); |
| return dn; |
| } |
| |
| dn = of_get_next_parent(dn); |
| } |
| |
| return NULL; |
| } |
| |
| static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) |
| { |
| return __find_pe_total_msi(pci_device_to_OF_node(dev), total); |
| } |
| |
| static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) |
| { |
| struct device_node *dn; |
| struct eeh_dev *edev; |
| |
| /* Found our PE and assume 8 at that point. */ |
| |
| dn = pci_device_to_OF_node(dev); |
| if (!dn) |
| return NULL; |
| |
| /* Get the top level device in the PE */ |
| edev = pdn_to_eeh_dev(PCI_DN(dn)); |
| if (edev->pe) |
| edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, |
| entry); |
| dn = pci_device_to_OF_node(edev->pdev); |
| if (!dn) |
| return NULL; |
| |
| /* We actually want the parent */ |
| dn = of_get_parent(dn); |
| if (!dn) |
| return NULL; |
| |
| /* Hardcode of 8 for old firmwares */ |
| *total = 8; |
| pr_debug("rtas_msi: using PE dn %pOF\n", dn); |
| |
| return dn; |
| } |
| |
| struct msi_counts { |
| struct device_node *requestor; |
| int num_devices; |
| int request; |
| int quota; |
| int spare; |
| int over_quota; |
| }; |
| |
| static void *count_non_bridge_devices(struct device_node *dn, void *data) |
| { |
| struct msi_counts *counts = data; |
| const __be32 *p; |
| u32 class; |
| |
| pr_debug("rtas_msi: counting %pOF\n", dn); |
| |
| p = of_get_property(dn, "class-code", NULL); |
| class = p ? be32_to_cpup(p) : 0; |
| |
| if ((class >> 8) != PCI_CLASS_BRIDGE_PCI) |
| counts->num_devices++; |
| |
| return NULL; |
| } |
| |
| static void *count_spare_msis(struct device_node *dn, void *data) |
| { |
| struct msi_counts *counts = data; |
| const __be32 *p; |
| int req; |
| |
| if (dn == counts->requestor) |
| req = counts->request; |
| else { |
| /* We don't know if a driver will try to use MSI or MSI-X, |
| * so we just have to punt and use the larger of the two. */ |
| req = 0; |
| p = of_get_property(dn, "ibm,req#msi", NULL); |
| if (p) |
| req = be32_to_cpup(p); |
| |
| p = of_get_property(dn, "ibm,req#msi-x", NULL); |
| if (p) |
| req = max(req, (int)be32_to_cpup(p)); |
| } |
| |
| if (req < counts->quota) |
| counts->spare += counts->quota - req; |
| else if (req > counts->quota) |
| counts->over_quota++; |
| |
| return NULL; |
| } |
| |
| static int msi_quota_for_device(struct pci_dev *dev, int request) |
| { |
| struct device_node *pe_dn; |
| struct msi_counts counts; |
| int total; |
| |
| pr_debug("rtas_msi: calc quota for %s, request %d\n", pci_name(dev), |
| request); |
| |
| pe_dn = find_pe_total_msi(dev, &total); |
| if (!pe_dn) |
| pe_dn = find_pe_dn(dev, &total); |
| |
| if (!pe_dn) { |
| pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev)); |
| goto out; |
| } |
| |
| pr_debug("rtas_msi: found PE %pOF\n", pe_dn); |
| |
| memset(&counts, 0, sizeof(struct msi_counts)); |
| |
| /* Work out how many devices we have below this PE */ |
| pci_traverse_device_nodes(pe_dn, count_non_bridge_devices, &counts); |
| |
| if (counts.num_devices == 0) { |
| pr_err("rtas_msi: found 0 devices under PE for %s\n", |
| pci_name(dev)); |
| goto out; |
| } |
| |
| counts.quota = total / counts.num_devices; |
| if (request <= counts.quota) |
| goto out; |
| |
| /* else, we have some more calculating to do */ |
| counts.requestor = pci_device_to_OF_node(dev); |
| counts.request = request; |
| pci_traverse_device_nodes(pe_dn, count_spare_msis, &counts); |
| |
| /* If the quota isn't an integer multiple of the total, we can |
| * use the remainder as spare MSIs for anyone that wants them. */ |
| counts.spare += total % counts.num_devices; |
| |
| /* Divide any spare by the number of over-quota requestors */ |
| if (counts.over_quota) |
| counts.quota += counts.spare / counts.over_quota; |
| |
| /* And finally clamp the request to the possibly adjusted quota */ |
| request = min(counts.quota, request); |
| |
| pr_debug("rtas_msi: request clamped to quota %d\n", request); |
| out: |
| of_node_put(pe_dn); |
| |
| return request; |
| } |
| |
| static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev) |
| { |
| u32 addr_hi, addr_lo; |
| |
| /* |
| * We should only get in here for IODA1 configs. This is based on the |
| * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS |
| * support, and we are in a PCIe Gen2 slot. |
| */ |
| dev_info(&pdev->dev, |
| "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n"); |
| pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi); |
| addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4); |
| pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo); |
| pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0); |
| } |
| |
| static int rtas_prepare_msi_irqs(struct pci_dev *pdev, int nvec_in, int type, |
| msi_alloc_info_t *arg) |
| { |
| struct pci_dn *pdn; |
| int quota, rc; |
| int nvec = nvec_in; |
| int use_32bit_msi_hack = 0; |
| |
| if (type == PCI_CAP_ID_MSIX) |
| rc = check_req_msix(pdev, nvec); |
| else |
| rc = check_req_msi(pdev, nvec); |
| |
| if (rc) |
| return rc; |
| |
| quota = msi_quota_for_device(pdev, nvec); |
| |
| if (quota && quota < nvec) |
| return quota; |
| |
| /* |
| * Firmware currently refuse any non power of two allocation |
| * so we round up if the quota will allow it. |
| */ |
| if (type == PCI_CAP_ID_MSIX) { |
| int m = roundup_pow_of_two(nvec); |
| quota = msi_quota_for_device(pdev, m); |
| |
| if (quota >= m) |
| nvec = m; |
| } |
| |
| pdn = pci_get_pdn(pdev); |
| |
| /* |
| * Try the new more explicit firmware interface, if that fails fall |
| * back to the old interface. The old interface is known to never |
| * return MSI-Xs. |
| */ |
| again: |
| if (type == PCI_CAP_ID_MSI) { |
| if (pdev->no_64bit_msi) { |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec); |
| if (rc < 0) { |
| /* |
| * We only want to run the 32 bit MSI hack below if |
| * the max bus speed is Gen2 speed |
| */ |
| if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) |
| return rc; |
| |
| use_32bit_msi_hack = 1; |
| } |
| } else |
| rc = -1; |
| |
| if (rc < 0) |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); |
| |
| if (rc < 0) { |
| pr_debug("rtas_msi: trying the old firmware call.\n"); |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); |
| } |
| |
| if (use_32bit_msi_hack && rc > 0) |
| rtas_hack_32bit_msi_gen2(pdev); |
| } else |
| rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); |
| |
| if (rc != nvec) { |
| if (nvec != nvec_in) { |
| nvec = nvec_in; |
| goto again; |
| } |
| pr_debug("rtas_msi: rtas_change_msi() failed\n"); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int pseries_msi_ops_prepare(struct irq_domain *domain, struct device *dev, |
| int nvec, msi_alloc_info_t *arg) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| int type = pdev->msix_enabled ? PCI_CAP_ID_MSIX : PCI_CAP_ID_MSI; |
| |
| return rtas_prepare_msi_irqs(pdev, nvec, type, arg); |
| } |
| |
| /* |
| * ->msi_free() is called before irq_domain_free_irqs_top() when the |
| * handler data is still available. Use that to clear the XIVE |
| * controller data. |
| */ |
| static void pseries_msi_ops_msi_free(struct irq_domain *domain, |
| struct msi_domain_info *info, |
| unsigned int irq) |
| { |
| if (xive_enabled()) |
| xive_irq_free_data(irq); |
| } |
| |
| /* |
| * RTAS can not disable one MSI at a time. It's all or nothing. Do it |
| * at the end after all IRQs have been freed. |
| */ |
| static void pseries_msi_post_free(struct irq_domain *domain, struct device *dev) |
| { |
| if (WARN_ON_ONCE(!dev_is_pci(dev))) |
| return; |
| |
| rtas_disable_msi(to_pci_dev(dev)); |
| } |
| |
| static struct msi_domain_ops pseries_pci_msi_domain_ops = { |
| .msi_prepare = pseries_msi_ops_prepare, |
| .msi_free = pseries_msi_ops_msi_free, |
| .msi_post_free = pseries_msi_post_free, |
| }; |
| |
| static void pseries_msi_shutdown(struct irq_data *d) |
| { |
| d = d->parent_data; |
| if (d->chip->irq_shutdown) |
| d->chip->irq_shutdown(d); |
| } |
| |
| static void pseries_msi_mask(struct irq_data *d) |
| { |
| pci_msi_mask_irq(d); |
| irq_chip_mask_parent(d); |
| } |
| |
| static void pseries_msi_unmask(struct irq_data *d) |
| { |
| pci_msi_unmask_irq(d); |
| irq_chip_unmask_parent(d); |
| } |
| |
| static void pseries_msi_write_msg(struct irq_data *data, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_data_get_msi_desc(data); |
| |
| /* |
| * Do not update the MSIx vector table. It's not strictly necessary |
| * because the table is initialized by the underlying hypervisor, PowerVM |
| * or QEMU/KVM. However, if the MSIx vector entry is cleared, any further |
| * activation will fail. This can happen in some drivers (eg. IPR) which |
| * deactivate an IRQ used for testing MSI support. |
| */ |
| entry->msg = *msg; |
| } |
| |
| static struct irq_chip pseries_pci_msi_irq_chip = { |
| .name = "pSeries-PCI-MSI", |
| .irq_shutdown = pseries_msi_shutdown, |
| .irq_mask = pseries_msi_mask, |
| .irq_unmask = pseries_msi_unmask, |
| .irq_eoi = irq_chip_eoi_parent, |
| .irq_write_msi_msg = pseries_msi_write_msg, |
| }; |
| |
| |
| /* |
| * Set MSI_FLAG_MSIX_CONTIGUOUS as there is no way to express to |
| * firmware to request a discontiguous or non-zero based range of |
| * MSI-X entries. Core code will reject such setup attempts. |
| */ |
| static struct msi_domain_info pseries_msi_domain_info = { |
| .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | |
| MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX | |
| MSI_FLAG_MSIX_CONTIGUOUS), |
| .ops = &pseries_pci_msi_domain_ops, |
| .chip = &pseries_pci_msi_irq_chip, |
| }; |
| |
| static void pseries_msi_compose_msg(struct irq_data *data, struct msi_msg *msg) |
| { |
| __pci_read_msi_msg(irq_data_get_msi_desc(data), msg); |
| } |
| |
| static struct irq_chip pseries_msi_irq_chip = { |
| .name = "pSeries-MSI", |
| .irq_shutdown = pseries_msi_shutdown, |
| .irq_mask = irq_chip_mask_parent, |
| .irq_unmask = irq_chip_unmask_parent, |
| .irq_eoi = irq_chip_eoi_parent, |
| .irq_set_affinity = irq_chip_set_affinity_parent, |
| .irq_compose_msi_msg = pseries_msi_compose_msg, |
| }; |
| |
| static int pseries_irq_parent_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| struct irq_fwspec parent_fwspec; |
| int ret; |
| |
| parent_fwspec.fwnode = domain->parent->fwnode; |
| parent_fwspec.param_count = 2; |
| parent_fwspec.param[0] = hwirq; |
| parent_fwspec.param[1] = IRQ_TYPE_EDGE_RISING; |
| |
| ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int pseries_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs, void *arg) |
| { |
| struct pci_controller *phb = domain->host_data; |
| msi_alloc_info_t *info = arg; |
| struct msi_desc *desc = info->desc; |
| struct pci_dev *pdev = msi_desc_to_pci_dev(desc); |
| int hwirq; |
| int i, ret; |
| |
| hwirq = rtas_query_irq_number(pci_get_pdn(pdev), desc->msi_index); |
| if (hwirq < 0) { |
| dev_err(&pdev->dev, "Failed to query HW IRQ: %d\n", hwirq); |
| return hwirq; |
| } |
| |
| dev_dbg(&pdev->dev, "%s bridge %pOF %d/%x #%d\n", __func__, |
| phb->dn, virq, hwirq, nr_irqs); |
| |
| for (i = 0; i < nr_irqs; i++) { |
| ret = pseries_irq_parent_domain_alloc(domain, virq + i, hwirq + i); |
| if (ret) |
| goto out; |
| |
| irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, |
| &pseries_msi_irq_chip, domain->host_data); |
| } |
| |
| return 0; |
| |
| out: |
| /* TODO: handle RTAS cleanup in ->msi_finish() ? */ |
| irq_domain_free_irqs_parent(domain, virq, i - 1); |
| return ret; |
| } |
| |
| static void pseries_irq_domain_free(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs) |
| { |
| struct irq_data *d = irq_domain_get_irq_data(domain, virq); |
| struct pci_controller *phb = irq_data_get_irq_chip_data(d); |
| |
| pr_debug("%s bridge %pOF %d #%d\n", __func__, phb->dn, virq, nr_irqs); |
| |
| /* XIVE domain data is cleared through ->msi_free() */ |
| } |
| |
| static const struct irq_domain_ops pseries_irq_domain_ops = { |
| .alloc = pseries_irq_domain_alloc, |
| .free = pseries_irq_domain_free, |
| }; |
| |
| static int __pseries_msi_allocate_domains(struct pci_controller *phb, |
| unsigned int count) |
| { |
| struct irq_domain *parent = irq_get_default_host(); |
| |
| phb->fwnode = irq_domain_alloc_named_id_fwnode("pSeries-MSI", |
| phb->global_number); |
| if (!phb->fwnode) |
| return -ENOMEM; |
| |
| phb->dev_domain = irq_domain_create_hierarchy(parent, 0, count, |
| phb->fwnode, |
| &pseries_irq_domain_ops, phb); |
| if (!phb->dev_domain) { |
| pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n", |
| phb->dn, phb->global_number); |
| irq_domain_free_fwnode(phb->fwnode); |
| return -ENOMEM; |
| } |
| |
| phb->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(phb->dn), |
| &pseries_msi_domain_info, |
| phb->dev_domain); |
| if (!phb->msi_domain) { |
| pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n", |
| phb->dn, phb->global_number); |
| irq_domain_free_fwnode(phb->fwnode); |
| irq_domain_remove(phb->dev_domain); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| int pseries_msi_allocate_domains(struct pci_controller *phb) |
| { |
| int count; |
| |
| if (!__find_pe_total_msi(phb->dn, &count)) { |
| pr_err("PCI: failed to find MSIs for bridge %pOF (domain %d)\n", |
| phb->dn, phb->global_number); |
| return -ENOSPC; |
| } |
| |
| return __pseries_msi_allocate_domains(phb, count); |
| } |
| |
| void pseries_msi_free_domains(struct pci_controller *phb) |
| { |
| if (phb->msi_domain) |
| irq_domain_remove(phb->msi_domain); |
| if (phb->dev_domain) |
| irq_domain_remove(phb->dev_domain); |
| if (phb->fwnode) |
| irq_domain_free_fwnode(phb->fwnode); |
| } |
| |
| static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev) |
| { |
| /* No LSI -> leave MSIs (if any) configured */ |
| if (!pdev->irq) { |
| dev_dbg(&pdev->dev, "rtas_msi: no LSI, nothing to do.\n"); |
| return; |
| } |
| |
| /* No MSI -> MSIs can't have been assigned by fw, leave LSI */ |
| if (check_req_msi(pdev, 1) && check_req_msix(pdev, 1)) { |
| dev_dbg(&pdev->dev, "rtas_msi: no req#msi/x, nothing to do.\n"); |
| return; |
| } |
| |
| dev_dbg(&pdev->dev, "rtas_msi: disabling existing MSI.\n"); |
| rtas_disable_msi(pdev); |
| } |
| |
| static int rtas_msi_init(void) |
| { |
| query_token = rtas_function_token(RTAS_FN_IBM_QUERY_INTERRUPT_SOURCE_NUMBER); |
| change_token = rtas_function_token(RTAS_FN_IBM_CHANGE_MSI); |
| |
| if ((query_token == RTAS_UNKNOWN_SERVICE) || |
| (change_token == RTAS_UNKNOWN_SERVICE)) { |
| pr_debug("rtas_msi: no RTAS tokens, no MSI support.\n"); |
| return -1; |
| } |
| |
| pr_debug("rtas_msi: Registering RTAS MSI callbacks.\n"); |
| |
| WARN_ON(ppc_md.pci_irq_fixup); |
| ppc_md.pci_irq_fixup = rtas_msi_pci_irq_fixup; |
| |
| return 0; |
| } |
| machine_arch_initcall(pseries, rtas_msi_init); |