| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * drivers/dma/fsl-edma.c |
| * |
| * Copyright 2013-2014 Freescale Semiconductor, Inc. |
| * |
| * Driver for the Freescale eDMA engine with flexible channel multiplexing |
| * capability for DMA request sources. The eDMA block can be found on some |
| * Vybrid and Layerscape SoCs. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_dma.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pm_domain.h> |
| |
| #include "fsl-edma-common.h" |
| |
| #define ARGS_RX BIT(0) |
| #define ARGS_REMOTE BIT(1) |
| #define ARGS_MULTI_FIFO BIT(2) |
| |
| static void fsl_edma_synchronize(struct dma_chan *chan) |
| { |
| struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan); |
| |
| vchan_synchronize(&fsl_chan->vchan); |
| } |
| |
| static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) |
| { |
| struct fsl_edma_engine *fsl_edma = dev_id; |
| unsigned int intr, ch; |
| struct edma_regs *regs = &fsl_edma->regs; |
| |
| intr = edma_readl(fsl_edma, regs->intl); |
| if (!intr) |
| return IRQ_NONE; |
| |
| for (ch = 0; ch < fsl_edma->n_chans; ch++) { |
| if (intr & (0x1 << ch)) { |
| edma_writeb(fsl_edma, EDMA_CINT_CINT(ch), regs->cint); |
| fsl_edma_tx_chan_handler(&fsl_edma->chans[ch]); |
| } |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t fsl_edma3_tx_handler(int irq, void *dev_id) |
| { |
| struct fsl_edma_chan *fsl_chan = dev_id; |
| unsigned int intr; |
| |
| intr = edma_readl_chreg(fsl_chan, ch_int); |
| if (!intr) |
| return IRQ_HANDLED; |
| |
| edma_writel_chreg(fsl_chan, 1, ch_int); |
| |
| fsl_edma_tx_chan_handler(fsl_chan); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id) |
| { |
| struct fsl_edma_engine *fsl_edma = dev_id; |
| unsigned int err, ch; |
| struct edma_regs *regs = &fsl_edma->regs; |
| |
| err = edma_readl(fsl_edma, regs->errl); |
| if (!err) |
| return IRQ_NONE; |
| |
| for (ch = 0; ch < fsl_edma->n_chans; ch++) { |
| if (err & (0x1 << ch)) { |
| fsl_edma_disable_request(&fsl_edma->chans[ch]); |
| edma_writeb(fsl_edma, EDMA_CERR_CERR(ch), regs->cerr); |
| fsl_edma_err_chan_handler(&fsl_edma->chans[ch]); |
| } |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id) |
| { |
| if (fsl_edma_tx_handler(irq, dev_id) == IRQ_HANDLED) |
| return IRQ_HANDLED; |
| |
| return fsl_edma_err_handler(irq, dev_id); |
| } |
| |
| static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *ofdma) |
| { |
| struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data; |
| struct dma_chan *chan, *_chan; |
| struct fsl_edma_chan *fsl_chan; |
| u32 dmamux_nr = fsl_edma->drvdata->dmamuxs; |
| unsigned long chans_per_mux = fsl_edma->n_chans / dmamux_nr; |
| |
| if (dma_spec->args_count != 2) |
| return NULL; |
| |
| mutex_lock(&fsl_edma->fsl_edma_mutex); |
| list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) { |
| if (chan->client_count) |
| continue; |
| if ((chan->chan_id / chans_per_mux) == dma_spec->args[0]) { |
| chan = dma_get_slave_channel(chan); |
| if (chan) { |
| chan->device->privatecnt++; |
| fsl_chan = to_fsl_edma_chan(chan); |
| fsl_chan->slave_id = dma_spec->args[1]; |
| fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, |
| true); |
| mutex_unlock(&fsl_edma->fsl_edma_mutex); |
| return chan; |
| } |
| } |
| } |
| mutex_unlock(&fsl_edma->fsl_edma_mutex); |
| return NULL; |
| } |
| |
| static struct dma_chan *fsl_edma3_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *ofdma) |
| { |
| struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data; |
| struct dma_chan *chan, *_chan; |
| struct fsl_edma_chan *fsl_chan; |
| bool b_chmux; |
| int i; |
| |
| if (dma_spec->args_count != 3) |
| return NULL; |
| |
| b_chmux = !!(fsl_edma->drvdata->flags & FSL_EDMA_DRV_HAS_CHMUX); |
| |
| mutex_lock(&fsl_edma->fsl_edma_mutex); |
| list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, |
| device_node) { |
| |
| if (chan->client_count) |
| continue; |
| |
| fsl_chan = to_fsl_edma_chan(chan); |
| i = fsl_chan - fsl_edma->chans; |
| |
| fsl_chan->priority = dma_spec->args[1]; |
| fsl_chan->is_rxchan = dma_spec->args[2] & ARGS_RX; |
| fsl_chan->is_remote = dma_spec->args[2] & ARGS_REMOTE; |
| fsl_chan->is_multi_fifo = dma_spec->args[2] & ARGS_MULTI_FIFO; |
| |
| if (!b_chmux && i == dma_spec->args[0]) { |
| chan = dma_get_slave_channel(chan); |
| chan->device->privatecnt++; |
| mutex_unlock(&fsl_edma->fsl_edma_mutex); |
| return chan; |
| } else if (b_chmux && !fsl_chan->srcid) { |
| /* if controller support channel mux, choose a free channel */ |
| chan = dma_get_slave_channel(chan); |
| chan->device->privatecnt++; |
| fsl_chan->srcid = dma_spec->args[0]; |
| mutex_unlock(&fsl_edma->fsl_edma_mutex); |
| return chan; |
| } |
| } |
| mutex_unlock(&fsl_edma->fsl_edma_mutex); |
| return NULL; |
| } |
| |
| static int |
| fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma) |
| { |
| int ret; |
| |
| edma_writel(fsl_edma, ~0, fsl_edma->regs.intl); |
| |
| fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx"); |
| if (fsl_edma->txirq < 0) |
| return fsl_edma->txirq; |
| |
| fsl_edma->errirq = platform_get_irq_byname(pdev, "edma-err"); |
| if (fsl_edma->errirq < 0) |
| return fsl_edma->errirq; |
| |
| if (fsl_edma->txirq == fsl_edma->errirq) { |
| ret = devm_request_irq(&pdev->dev, fsl_edma->txirq, |
| fsl_edma_irq_handler, 0, "eDMA", fsl_edma); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register eDMA IRQ.\n"); |
| return ret; |
| } |
| } else { |
| ret = devm_request_irq(&pdev->dev, fsl_edma->txirq, |
| fsl_edma_tx_handler, 0, "eDMA tx", fsl_edma); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n"); |
| return ret; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, fsl_edma->errirq, |
| fsl_edma_err_handler, 0, "eDMA err", fsl_edma); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register eDMA err IRQ.\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_edma3_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma) |
| { |
| int ret; |
| int i; |
| |
| for (i = 0; i < fsl_edma->n_chans; i++) { |
| |
| struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i]; |
| |
| if (fsl_edma->chan_masked & BIT(i)) |
| continue; |
| |
| /* request channel irq */ |
| fsl_chan->txirq = platform_get_irq(pdev, i); |
| if (fsl_chan->txirq < 0) { |
| dev_err(&pdev->dev, "Can't get chan %d's irq.\n", i); |
| return -EINVAL; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, fsl_chan->txirq, |
| fsl_edma3_tx_handler, IRQF_SHARED, |
| fsl_chan->chan_name, fsl_chan); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register chan%d's IRQ.\n", i); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int |
| fsl_edma2_irq_init(struct platform_device *pdev, |
| struct fsl_edma_engine *fsl_edma) |
| { |
| int i, ret, irq; |
| int count; |
| |
| edma_writel(fsl_edma, ~0, fsl_edma->regs.intl); |
| |
| count = platform_irq_count(pdev); |
| dev_dbg(&pdev->dev, "%s Found %d interrupts\r\n", __func__, count); |
| if (count <= 2) { |
| dev_err(&pdev->dev, "Interrupts in DTS not correct.\n"); |
| return -EINVAL; |
| } |
| /* |
| * 16 channel independent interrupts + 1 error interrupt on i.mx7ulp. |
| * 2 channel share one interrupt, for example, ch0/ch16, ch1/ch17... |
| * For now, just simply request irq without IRQF_SHARED flag, since 16 |
| * channels are enough on i.mx7ulp whose M4 domain own some peripherals. |
| */ |
| for (i = 0; i < count; i++) { |
| irq = platform_get_irq(pdev, i); |
| if (irq < 0) |
| return -ENXIO; |
| |
| /* The last IRQ is for eDMA err */ |
| if (i == count - 1) |
| ret = devm_request_irq(&pdev->dev, irq, |
| fsl_edma_err_handler, |
| 0, "eDMA2-ERR", fsl_edma); |
| else |
| ret = devm_request_irq(&pdev->dev, irq, |
| fsl_edma_tx_handler, 0, |
| fsl_edma->chans[i].chan_name, |
| fsl_edma); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void fsl_edma_irq_exit( |
| struct platform_device *pdev, struct fsl_edma_engine *fsl_edma) |
| { |
| if (fsl_edma->txirq == fsl_edma->errirq) { |
| devm_free_irq(&pdev->dev, fsl_edma->txirq, fsl_edma); |
| } else { |
| devm_free_irq(&pdev->dev, fsl_edma->txirq, fsl_edma); |
| devm_free_irq(&pdev->dev, fsl_edma->errirq, fsl_edma); |
| } |
| } |
| |
| static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks) |
| { |
| int i; |
| |
| for (i = 0; i < nr_clocks; i++) |
| clk_disable_unprepare(fsl_edma->muxclk[i]); |
| } |
| |
| static struct fsl_edma_drvdata vf610_data = { |
| .dmamuxs = DMAMUX_NR, |
| .flags = FSL_EDMA_DRV_WRAP_IO, |
| .chreg_off = EDMA_TCD, |
| .chreg_space_sz = sizeof(struct fsl_edma_hw_tcd), |
| .setup_irq = fsl_edma_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata ls1028a_data = { |
| .dmamuxs = DMAMUX_NR, |
| .flags = FSL_EDMA_DRV_MUX_SWAP | FSL_EDMA_DRV_WRAP_IO, |
| .chreg_off = EDMA_TCD, |
| .chreg_space_sz = sizeof(struct fsl_edma_hw_tcd), |
| .setup_irq = fsl_edma_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata imx7ulp_data = { |
| .dmamuxs = 1, |
| .chreg_off = EDMA_TCD, |
| .chreg_space_sz = sizeof(struct fsl_edma_hw_tcd), |
| .flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_CONFIG32, |
| .setup_irq = fsl_edma2_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata imx8qm_data = { |
| .flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3, |
| .chreg_space_sz = 0x10000, |
| .chreg_off = 0x10000, |
| .setup_irq = fsl_edma3_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata imx8qm_audio_data = { |
| .flags = FSL_EDMA_DRV_QUIRK_SWAPPED | FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3, |
| .chreg_space_sz = 0x10000, |
| .chreg_off = 0x10000, |
| .setup_irq = fsl_edma3_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata imx93_data3 = { |
| .flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA3, |
| .chreg_space_sz = 0x10000, |
| .chreg_off = 0x10000, |
| .setup_irq = fsl_edma3_irq_init, |
| }; |
| |
| static struct fsl_edma_drvdata imx93_data4 = { |
| .flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4, |
| .chreg_space_sz = 0x8000, |
| .chreg_off = 0x10000, |
| .setup_irq = fsl_edma3_irq_init, |
| }; |
| |
| static const struct of_device_id fsl_edma_dt_ids[] = { |
| { .compatible = "fsl,vf610-edma", .data = &vf610_data}, |
| { .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data}, |
| { .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data}, |
| { .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data}, |
| { .compatible = "fsl,imx8qm-adma", .data = &imx8qm_audio_data}, |
| { .compatible = "fsl,imx93-edma3", .data = &imx93_data3}, |
| { .compatible = "fsl,imx93-edma4", .data = &imx93_data4}, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids); |
| |
| static int fsl_edma3_attach_pd(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma) |
| { |
| struct fsl_edma_chan *fsl_chan; |
| struct device_link *link; |
| struct device *pd_chan; |
| struct device *dev; |
| int i; |
| |
| dev = &pdev->dev; |
| |
| for (i = 0; i < fsl_edma->n_chans; i++) { |
| if (fsl_edma->chan_masked & BIT(i)) |
| continue; |
| |
| fsl_chan = &fsl_edma->chans[i]; |
| |
| pd_chan = dev_pm_domain_attach_by_id(dev, i); |
| if (IS_ERR_OR_NULL(pd_chan)) { |
| dev_err(dev, "Failed attach pd %d\n", i); |
| return -EINVAL; |
| } |
| |
| link = device_link_add(dev, pd_chan, DL_FLAG_STATELESS | |
| DL_FLAG_PM_RUNTIME | |
| DL_FLAG_RPM_ACTIVE); |
| if (IS_ERR(link)) { |
| dev_err(dev, "Failed to add device_link to %d: %ld\n", i, |
| PTR_ERR(link)); |
| return -EINVAL; |
| } |
| |
| fsl_chan->pd_dev = pd_chan; |
| |
| pm_runtime_use_autosuspend(fsl_chan->pd_dev); |
| pm_runtime_set_autosuspend_delay(fsl_chan->pd_dev, 200); |
| pm_runtime_set_active(fsl_chan->pd_dev); |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_edma_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(fsl_edma_dt_ids, &pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_edma_engine *fsl_edma; |
| const struct fsl_edma_drvdata *drvdata = NULL; |
| u32 chan_mask[2] = {0, 0}; |
| struct edma_regs *regs; |
| int chans; |
| int ret, i; |
| |
| if (of_id) |
| drvdata = of_id->data; |
| if (!drvdata) { |
| dev_err(&pdev->dev, "unable to find driver data\n"); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32(np, "dma-channels", &chans); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't get dma-channels.\n"); |
| return ret; |
| } |
| |
| fsl_edma = devm_kzalloc(&pdev->dev, struct_size(fsl_edma, chans, chans), |
| GFP_KERNEL); |
| if (!fsl_edma) |
| return -ENOMEM; |
| |
| fsl_edma->drvdata = drvdata; |
| fsl_edma->n_chans = chans; |
| mutex_init(&fsl_edma->fsl_edma_mutex); |
| |
| fsl_edma->membase = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(fsl_edma->membase)) |
| return PTR_ERR(fsl_edma->membase); |
| |
| if (!(drvdata->flags & FSL_EDMA_DRV_SPLIT_REG)) { |
| fsl_edma_setup_regs(fsl_edma); |
| regs = &fsl_edma->regs; |
| } |
| |
| if (drvdata->flags & FSL_EDMA_DRV_HAS_DMACLK) { |
| fsl_edma->dmaclk = devm_clk_get_enabled(&pdev->dev, "dma"); |
| if (IS_ERR(fsl_edma->dmaclk)) { |
| dev_err(&pdev->dev, "Missing DMA block clock.\n"); |
| return PTR_ERR(fsl_edma->dmaclk); |
| } |
| } |
| |
| if (drvdata->flags & FSL_EDMA_DRV_HAS_CHCLK) { |
| fsl_edma->chclk = devm_clk_get_enabled(&pdev->dev, "mp"); |
| if (IS_ERR(fsl_edma->chclk)) { |
| dev_err(&pdev->dev, "Missing MP block clock.\n"); |
| return PTR_ERR(fsl_edma->chclk); |
| } |
| } |
| |
| ret = of_property_read_variable_u32_array(np, "dma-channel-mask", chan_mask, 1, 2); |
| |
| if (ret > 0) { |
| fsl_edma->chan_masked = chan_mask[1]; |
| fsl_edma->chan_masked <<= 32; |
| fsl_edma->chan_masked |= chan_mask[0]; |
| } |
| |
| for (i = 0; i < fsl_edma->drvdata->dmamuxs; i++) { |
| char clkname[32]; |
| |
| /* eDMAv3 mux register move to TCD area if ch_mux exist */ |
| if (drvdata->flags & FSL_EDMA_DRV_SPLIT_REG) |
| break; |
| |
| fsl_edma->muxbase[i] = devm_platform_ioremap_resource(pdev, |
| 1 + i); |
| if (IS_ERR(fsl_edma->muxbase[i])) { |
| /* on error: disable all previously enabled clks */ |
| fsl_disable_clocks(fsl_edma, i); |
| return PTR_ERR(fsl_edma->muxbase[i]); |
| } |
| |
| sprintf(clkname, "dmamux%d", i); |
| fsl_edma->muxclk[i] = devm_clk_get_enabled(&pdev->dev, clkname); |
| if (IS_ERR(fsl_edma->muxclk[i])) { |
| dev_err(&pdev->dev, "Missing DMAMUX block clock.\n"); |
| /* on error: disable all previously enabled clks */ |
| return PTR_ERR(fsl_edma->muxclk[i]); |
| } |
| } |
| |
| fsl_edma->big_endian = of_property_read_bool(np, "big-endian"); |
| |
| if (drvdata->flags & FSL_EDMA_DRV_HAS_PD) { |
| ret = fsl_edma3_attach_pd(pdev, fsl_edma); |
| if (ret) |
| return ret; |
| } |
| |
| INIT_LIST_HEAD(&fsl_edma->dma_dev.channels); |
| for (i = 0; i < fsl_edma->n_chans; i++) { |
| struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i]; |
| int len; |
| |
| if (fsl_edma->chan_masked & BIT(i)) |
| continue; |
| |
| snprintf(fsl_chan->chan_name, sizeof(fsl_chan->chan_name), "%s-CH%02d", |
| dev_name(&pdev->dev), i); |
| |
| fsl_chan->edma = fsl_edma; |
| fsl_chan->pm_state = RUNNING; |
| fsl_chan->slave_id = 0; |
| fsl_chan->idle = true; |
| fsl_chan->dma_dir = DMA_NONE; |
| fsl_chan->vchan.desc_free = fsl_edma_free_desc; |
| |
| len = (drvdata->flags & FSL_EDMA_DRV_SPLIT_REG) ? |
| offsetof(struct fsl_edma3_ch_reg, tcd) : 0; |
| fsl_chan->tcd = fsl_edma->membase |
| + i * drvdata->chreg_space_sz + drvdata->chreg_off + len; |
| |
| fsl_chan->pdev = pdev; |
| vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev); |
| |
| edma_write_tcdreg(fsl_chan, 0, csr); |
| fsl_edma_chan_mux(fsl_chan, 0, false); |
| } |
| |
| ret = fsl_edma->drvdata->setup_irq(pdev, fsl_edma); |
| if (ret) |
| return ret; |
| |
| dma_cap_set(DMA_PRIVATE, fsl_edma->dma_dev.cap_mask); |
| dma_cap_set(DMA_SLAVE, fsl_edma->dma_dev.cap_mask); |
| dma_cap_set(DMA_CYCLIC, fsl_edma->dma_dev.cap_mask); |
| dma_cap_set(DMA_MEMCPY, fsl_edma->dma_dev.cap_mask); |
| |
| fsl_edma->dma_dev.dev = &pdev->dev; |
| fsl_edma->dma_dev.device_alloc_chan_resources |
| = fsl_edma_alloc_chan_resources; |
| fsl_edma->dma_dev.device_free_chan_resources |
| = fsl_edma_free_chan_resources; |
| fsl_edma->dma_dev.device_tx_status = fsl_edma_tx_status; |
| fsl_edma->dma_dev.device_prep_slave_sg = fsl_edma_prep_slave_sg; |
| fsl_edma->dma_dev.device_prep_dma_cyclic = fsl_edma_prep_dma_cyclic; |
| fsl_edma->dma_dev.device_prep_dma_memcpy = fsl_edma_prep_memcpy; |
| fsl_edma->dma_dev.device_config = fsl_edma_slave_config; |
| fsl_edma->dma_dev.device_pause = fsl_edma_pause; |
| fsl_edma->dma_dev.device_resume = fsl_edma_resume; |
| fsl_edma->dma_dev.device_terminate_all = fsl_edma_terminate_all; |
| fsl_edma->dma_dev.device_synchronize = fsl_edma_synchronize; |
| fsl_edma->dma_dev.device_issue_pending = fsl_edma_issue_pending; |
| |
| fsl_edma->dma_dev.src_addr_widths = FSL_EDMA_BUSWIDTHS; |
| fsl_edma->dma_dev.dst_addr_widths = FSL_EDMA_BUSWIDTHS; |
| |
| if (drvdata->flags & FSL_EDMA_DRV_BUS_8BYTE) { |
| fsl_edma->dma_dev.src_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); |
| fsl_edma->dma_dev.dst_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); |
| } |
| |
| fsl_edma->dma_dev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); |
| if (drvdata->flags & FSL_EDMA_DRV_DEV_TO_DEV) |
| fsl_edma->dma_dev.directions |= BIT(DMA_DEV_TO_DEV); |
| |
| fsl_edma->dma_dev.copy_align = drvdata->flags & FSL_EDMA_DRV_ALIGN_64BYTE ? |
| DMAENGINE_ALIGN_64_BYTES : |
| DMAENGINE_ALIGN_32_BYTES; |
| |
| /* Per worst case 'nbytes = 1' take CITER as the max_seg_size */ |
| dma_set_max_seg_size(fsl_edma->dma_dev.dev, 0x3fff); |
| |
| fsl_edma->dma_dev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; |
| |
| platform_set_drvdata(pdev, fsl_edma); |
| |
| ret = dma_async_device_register(&fsl_edma->dma_dev); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Can't register Freescale eDMA engine. (%d)\n", ret); |
| return ret; |
| } |
| |
| ret = of_dma_controller_register(np, |
| drvdata->flags & FSL_EDMA_DRV_SPLIT_REG ? fsl_edma3_xlate : fsl_edma_xlate, |
| fsl_edma); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Can't register Freescale eDMA of_dma. (%d)\n", ret); |
| dma_async_device_unregister(&fsl_edma->dma_dev); |
| return ret; |
| } |
| |
| /* enable round robin arbitration */ |
| if (!(drvdata->flags & FSL_EDMA_DRV_SPLIT_REG)) |
| edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr); |
| |
| return 0; |
| } |
| |
| static int fsl_edma_remove(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_edma_engine *fsl_edma = platform_get_drvdata(pdev); |
| |
| fsl_edma_irq_exit(pdev, fsl_edma); |
| fsl_edma_cleanup_vchan(&fsl_edma->dma_dev); |
| of_dma_controller_free(np); |
| dma_async_device_unregister(&fsl_edma->dma_dev); |
| fsl_disable_clocks(fsl_edma, fsl_edma->drvdata->dmamuxs); |
| |
| return 0; |
| } |
| |
| static int fsl_edma_suspend_late(struct device *dev) |
| { |
| struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); |
| struct fsl_edma_chan *fsl_chan; |
| unsigned long flags; |
| int i; |
| |
| for (i = 0; i < fsl_edma->n_chans; i++) { |
| fsl_chan = &fsl_edma->chans[i]; |
| spin_lock_irqsave(&fsl_chan->vchan.lock, flags); |
| /* Make sure chan is idle or will force disable. */ |
| if (unlikely(!fsl_chan->idle)) { |
| dev_warn(dev, "WARN: There is non-idle channel."); |
| fsl_edma_disable_request(fsl_chan); |
| fsl_edma_chan_mux(fsl_chan, 0, false); |
| } |
| |
| fsl_chan->pm_state = SUSPENDED; |
| spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_edma_resume_early(struct device *dev) |
| { |
| struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); |
| struct fsl_edma_chan *fsl_chan; |
| struct edma_regs *regs = &fsl_edma->regs; |
| int i; |
| |
| for (i = 0; i < fsl_edma->n_chans; i++) { |
| fsl_chan = &fsl_edma->chans[i]; |
| fsl_chan->pm_state = RUNNING; |
| edma_write_tcdreg(fsl_chan, 0, csr); |
| if (fsl_chan->slave_id != 0) |
| fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true); |
| } |
| |
| edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr); |
| |
| return 0; |
| } |
| |
| /* |
| * eDMA provides the service to others, so it should be suspend late |
| * and resume early. When eDMA suspend, all of the clients should stop |
| * the DMA data transmission and let the channel idle. |
| */ |
| static const struct dev_pm_ops fsl_edma_pm_ops = { |
| .suspend_late = fsl_edma_suspend_late, |
| .resume_early = fsl_edma_resume_early, |
| }; |
| |
| static struct platform_driver fsl_edma_driver = { |
| .driver = { |
| .name = "fsl-edma", |
| .of_match_table = fsl_edma_dt_ids, |
| .pm = &fsl_edma_pm_ops, |
| }, |
| .probe = fsl_edma_probe, |
| .remove = fsl_edma_remove, |
| }; |
| |
| static int __init fsl_edma_init(void) |
| { |
| return platform_driver_register(&fsl_edma_driver); |
| } |
| subsys_initcall(fsl_edma_init); |
| |
| static void __exit fsl_edma_exit(void) |
| { |
| platform_driver_unregister(&fsl_edma_driver); |
| } |
| module_exit(fsl_edma_exit); |
| |
| MODULE_ALIAS("platform:fsl-edma"); |
| MODULE_DESCRIPTION("Freescale eDMA engine driver"); |
| MODULE_LICENSE("GPL v2"); |