| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * nct6775 - Driver for the hardware monitoring functionality of |
| * Nuvoton NCT677x Super-I/O chips |
| * |
| * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> |
| * |
| * Derived from w83627ehf driver |
| * Copyright (C) 2005-2012 Jean Delvare <jdelvare@suse.de> |
| * Copyright (C) 2006 Yuan Mu (Winbond), |
| * Rudolf Marek <r.marek@assembler.cz> |
| * David Hubbard <david.c.hubbard@gmail.com> |
| * Daniel J Blueman <daniel.blueman@gmail.com> |
| * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00) |
| * |
| * Shamelessly ripped from the w83627hf driver |
| * Copyright (C) 2003 Mark Studebaker |
| * |
| * Supports the following chips: |
| * |
| * Chip #vin #fan #pwm #temp chip IDs man ID |
| * nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3 |
| * nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3 |
| * nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3 |
| * nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3 |
| * nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3 |
| * nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3 |
| * nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3 |
| * nct6793d 15 6 6 2+6 0xd120 0xc1 0x5ca3 |
| * nct6795d 14 6 6 2+6 0xd350 0xc1 0x5ca3 |
| * nct6796d 14 7 7 2+6 0xd420 0xc1 0x5ca3 |
| * nct6797d 14 7 7 2+6 0xd450 0xc1 0x5ca3 |
| * (0xd451) |
| * nct6798d 14 7 7 2+6 0xd428 0xc1 0x5ca3 |
| * (0xd429) |
| * nct6796d-s 18 7 7 6+2 0xd801 0xc1 0x5ca3 |
| * nct6799d-r 18 7 7 6+2 0xd802 0xc1 0x5ca3 |
| * |
| * #temp lists the number of monitored temperature sources (first value) plus |
| * the number of directly connectable temperature sensors (second value). |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/bitops.h> |
| #include <linux/nospec.h> |
| #include <linux/regmap.h> |
| #include "lm75.h" |
| #include "nct6775.h" |
| |
| #undef DEFAULT_SYMBOL_NAMESPACE |
| #define DEFAULT_SYMBOL_NAMESPACE HWMON_NCT6775 |
| |
| #define USE_ALTERNATE |
| |
| /* used to set data->name = nct6775_device_names[data->sio_kind] */ |
| static const char * const nct6775_device_names[] = { |
| "nct6106", |
| "nct6116", |
| "nct6775", |
| "nct6776", |
| "nct6779", |
| "nct6791", |
| "nct6792", |
| "nct6793", |
| "nct6795", |
| "nct6796", |
| "nct6797", |
| "nct6798", |
| "nct6799", |
| }; |
| |
| /* Common and NCT6775 specific data */ |
| |
| /* |
| * Voltage min/max registers for nr=7..14 are in bank 5 |
| * min/max: 15-17 for NCT6799 only |
| */ |
| |
| static const u16 NCT6775_REG_IN_MAX[] = { |
| 0x2b, 0x2d, 0x2f, 0x31, 0x33, 0x35, 0x37, 0x554, 0x556, 0x558, 0x55a, |
| 0x55c, 0x55e, 0x560, 0x562, 0x564, 0x570, 0x572 }; |
| static const u16 NCT6775_REG_IN_MIN[] = { |
| 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x555, 0x557, 0x559, 0x55b, |
| 0x55d, 0x55f, 0x561, 0x563, 0x565, 0x571, 0x573 }; |
| static const u16 NCT6775_REG_IN[] = { |
| 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x550, 0x551, 0x552 |
| }; |
| |
| #define NCT6775_REG_VBAT 0x5D |
| #define NCT6775_REG_DIODE 0x5E |
| #define NCT6775_DIODE_MASK 0x02 |
| |
| static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B }; |
| |
| static const s8 NCT6775_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 8, 21, 20, 16, 17, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, -1, /* intr0-intr1 */ |
| }; |
| |
| static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e }; |
| |
| static const s8 NCT6775_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 8, 9, 10, 16, 17, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, 28, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, -1, 21 /* intr0-intr1, beep_en */ |
| }; |
| |
| /* DC or PWM output fan configuration */ |
| static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 }; |
| static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 }; |
| |
| /* Advanced Fan control, some values are common for all fans */ |
| |
| static const u16 NCT6775_REG_TARGET[] = { |
| 0x101, 0x201, 0x301, 0x801, 0x901, 0xa01, 0xb01 }; |
| static const u16 NCT6775_REG_FAN_MODE[] = { |
| 0x102, 0x202, 0x302, 0x802, 0x902, 0xa02, 0xb02 }; |
| static const u16 NCT6775_REG_FAN_STEP_DOWN_TIME[] = { |
| 0x103, 0x203, 0x303, 0x803, 0x903, 0xa03, 0xb03 }; |
| static const u16 NCT6775_REG_FAN_STEP_UP_TIME[] = { |
| 0x104, 0x204, 0x304, 0x804, 0x904, 0xa04, 0xb04 }; |
| static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { |
| 0x105, 0x205, 0x305, 0x805, 0x905, 0xa05, 0xb05 }; |
| static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { |
| 0x106, 0x206, 0x306, 0x806, 0x906, 0xa06, 0xb06 }; |
| static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a }; |
| static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b }; |
| |
| static const u16 NCT6775_REG_FAN_STOP_TIME[] = { |
| 0x107, 0x207, 0x307, 0x807, 0x907, 0xa07, 0xb07 }; |
| static const u16 NCT6775_REG_PWM[] = { |
| 0x109, 0x209, 0x309, 0x809, 0x909, 0xa09, 0xb09 }; |
| static const u16 NCT6775_REG_PWM_READ[] = { |
| 0x01, 0x03, 0x11, 0x13, 0x15, 0xa09, 0xb09 }; |
| |
| static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; |
| static const u16 NCT6775_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d }; |
| static const u16 NCT6775_REG_FAN_PULSES[NUM_FAN] = { |
| 0x641, 0x642, 0x643, 0x644 }; |
| static const u16 NCT6775_FAN_PULSE_SHIFT[NUM_FAN] = { }; |
| |
| static const u16 NCT6775_REG_TEMP[] = { |
| 0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d }; |
| |
| static const u16 NCT6775_REG_TEMP_MON[] = { 0x73, 0x75, 0x77 }; |
| |
| static const u16 NCT6775_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = { |
| 0, 0x152, 0x252, 0x628, 0x629, 0x62A }; |
| static const u16 NCT6775_REG_TEMP_HYST[ARRAY_SIZE(NCT6775_REG_TEMP)] = { |
| 0x3a, 0x153, 0x253, 0x673, 0x678, 0x67D }; |
| static const u16 NCT6775_REG_TEMP_OVER[ARRAY_SIZE(NCT6775_REG_TEMP)] = { |
| 0x39, 0x155, 0x255, 0x672, 0x677, 0x67C }; |
| |
| static const u16 NCT6775_REG_TEMP_SOURCE[ARRAY_SIZE(NCT6775_REG_TEMP)] = { |
| 0x621, 0x622, 0x623, 0x624, 0x625, 0x626 }; |
| |
| static const u16 NCT6775_REG_TEMP_SEL[] = { |
| 0x100, 0x200, 0x300, 0x800, 0x900, 0xa00, 0xb00 }; |
| |
| static const u16 NCT6775_REG_WEIGHT_TEMP_SEL[] = { |
| 0x139, 0x239, 0x339, 0x839, 0x939, 0xa39 }; |
| static const u16 NCT6775_REG_WEIGHT_TEMP_STEP[] = { |
| 0x13a, 0x23a, 0x33a, 0x83a, 0x93a, 0xa3a }; |
| static const u16 NCT6775_REG_WEIGHT_TEMP_STEP_TOL[] = { |
| 0x13b, 0x23b, 0x33b, 0x83b, 0x93b, 0xa3b }; |
| static const u16 NCT6775_REG_WEIGHT_DUTY_STEP[] = { |
| 0x13c, 0x23c, 0x33c, 0x83c, 0x93c, 0xa3c }; |
| static const u16 NCT6775_REG_WEIGHT_TEMP_BASE[] = { |
| 0x13d, 0x23d, 0x33d, 0x83d, 0x93d, 0xa3d }; |
| |
| static const u16 NCT6775_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; |
| |
| static const u16 NCT6775_REG_AUTO_TEMP[] = { |
| 0x121, 0x221, 0x321, 0x821, 0x921, 0xa21, 0xb21 }; |
| static const u16 NCT6775_REG_AUTO_PWM[] = { |
| 0x127, 0x227, 0x327, 0x827, 0x927, 0xa27, 0xb27 }; |
| |
| #define NCT6775_AUTO_TEMP(data, nr, p) ((data)->REG_AUTO_TEMP[nr] + (p)) |
| #define NCT6775_AUTO_PWM(data, nr, p) ((data)->REG_AUTO_PWM[nr] + (p)) |
| |
| static const u16 NCT6775_REG_CRITICAL_ENAB[] = { 0x134, 0x234, 0x334 }; |
| |
| static const u16 NCT6775_REG_CRITICAL_TEMP[] = { |
| 0x135, 0x235, 0x335, 0x835, 0x935, 0xa35, 0xb35 }; |
| static const u16 NCT6775_REG_CRITICAL_TEMP_TOLERANCE[] = { |
| 0x138, 0x238, 0x338, 0x838, 0x938, 0xa38, 0xb38 }; |
| |
| static const char *const nct6775_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN", |
| "AMD SB-TSI", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PECI Agent 2", |
| "PECI Agent 3", |
| "PECI Agent 4", |
| "PECI Agent 5", |
| "PECI Agent 6", |
| "PECI Agent 7", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "PCH_DIM0_TEMP", |
| "PCH_DIM1_TEMP", |
| "PCH_DIM2_TEMP", |
| "PCH_DIM3_TEMP" |
| }; |
| |
| #define NCT6775_TEMP_MASK 0x001ffffe |
| #define NCT6775_VIRT_TEMP_MASK 0x00000000 |
| |
| static const u16 NCT6775_REG_TEMP_ALTERNATE[32] = { |
| [13] = 0x661, |
| [14] = 0x662, |
| [15] = 0x664, |
| }; |
| |
| static const u16 NCT6775_REG_TEMP_CRIT[32] = { |
| [4] = 0xa00, |
| [5] = 0xa01, |
| [6] = 0xa02, |
| [7] = 0xa03, |
| [8] = 0xa04, |
| [9] = 0xa05, |
| [10] = 0xa06, |
| [11] = 0xa07 |
| }; |
| |
| static const u16 NCT6775_REG_TSI_TEMP[] = { 0x669 }; |
| |
| /* NCT6776 specific data */ |
| |
| /* STEP_UP_TIME and STEP_DOWN_TIME regs are swapped for all chips but NCT6775 */ |
| #define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME |
| #define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME |
| |
| static const s8 NCT6776_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 8, 21, 20, 16, 17, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, 10, 23, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, 9, /* intr0-intr1 */ |
| }; |
| |
| /* 0xbf: nct6799 only */ |
| static const u16 NCT6776_REG_BEEP[NUM_REG_BEEP] = { 0xb2, 0xb3, 0xb4, 0xb5, 0xbf }; |
| |
| static const s8 NCT6776_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 30, 31, 24 /* intr0-intr1, beep_en */ |
| }; |
| |
| static const u16 NCT6776_REG_TOLERANCE_H[] = { |
| 0x10c, 0x20c, 0x30c, 0x80c, 0x90c, 0xa0c, 0xb0c }; |
| |
| static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0, 0, 0, 0 }; |
| static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0, 0, 0, 0 }; |
| |
| static const u16 NCT6776_REG_FAN_MIN[] = { |
| 0x63a, 0x63c, 0x63e, 0x640, 0x642, 0x64a, 0x64c }; |
| static const u16 NCT6776_REG_FAN_PULSES[NUM_FAN] = { |
| 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; |
| |
| static const u16 NCT6776_REG_WEIGHT_DUTY_BASE[] = { |
| 0x13e, 0x23e, 0x33e, 0x83e, 0x93e, 0xa3e }; |
| |
| static const u16 NCT6776_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = { |
| 0x18, 0x152, 0x252, 0x628, 0x629, 0x62A }; |
| |
| static const char *const nct6776_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "SMBUSMASTER 2", |
| "SMBUSMASTER 3", |
| "SMBUSMASTER 4", |
| "SMBUSMASTER 5", |
| "SMBUSMASTER 6", |
| "SMBUSMASTER 7", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "PCH_DIM0_TEMP", |
| "PCH_DIM1_TEMP", |
| "PCH_DIM2_TEMP", |
| "PCH_DIM3_TEMP", |
| "BYTE_TEMP" |
| }; |
| |
| #define NCT6776_TEMP_MASK 0x007ffffe |
| #define NCT6776_VIRT_TEMP_MASK 0x00000000 |
| |
| static const u16 NCT6776_REG_TEMP_ALTERNATE[32] = { |
| [14] = 0x401, |
| [15] = 0x402, |
| [16] = 0x404, |
| }; |
| |
| static const u16 NCT6776_REG_TEMP_CRIT[32] = { |
| [11] = 0x709, |
| [12] = 0x70a, |
| }; |
| |
| static const u16 NCT6776_REG_TSI_TEMP[] = { |
| 0x409, 0x40b, 0x40d, 0x40f, 0x411, 0x413, 0x415, 0x417 }; |
| |
| /* NCT6779 specific data */ |
| |
| /* |
| * 15-17 for NCT6799 only, register labels are: |
| * CPUVC, VIN1, AVSB, 3VCC, VIN0, VIN8, VIN4, 3VSB |
| * VBAT, VTT, VIN5, VIN6, VIN2, VIN3, VIN7, VIN9 |
| * VHIF, VIN10 |
| */ |
| static const u16 NCT6779_REG_IN[] = { |
| 0x480, 0x481, 0x482, 0x483, 0x484, 0x485, 0x486, 0x487, |
| 0x488, 0x489, 0x48a, 0x48b, 0x48c, 0x48d, 0x48e, 0x48f, |
| 0x470, 0x471}; |
| |
| static const u16 NCT6779_REG_ALARM[NUM_REG_ALARM] = { |
| 0x459, 0x45A, 0x45B, 0x568 }; |
| |
| static const s8 NCT6779_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 8, 21, 20, 16, 17, 24, 25, 26, /* in0-in11 */ |
| 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, 10, 23, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, 9, /* intr0-intr1 */ |
| }; |
| |
| static const s8 NCT6779_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, /* in0-in11 */ |
| 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 30, 31, 24 /* intr0-intr1, beep_en */ |
| }; |
| |
| static const u16 NCT6779_REG_FAN[] = { |
| 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x4ce }; |
| static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = { |
| 0x644, 0x645, 0x646, 0x647, 0x648, 0x649, 0x64f }; |
| |
| static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = { |
| 0x136, 0x236, 0x336, 0x836, 0x936, 0xa36, 0xb36 }; |
| #define NCT6779_CRITICAL_PWM_ENABLE_MASK 0x01 |
| static const u16 NCT6779_REG_CRITICAL_PWM[] = { |
| 0x137, 0x237, 0x337, 0x837, 0x937, 0xa37, 0xb37 }; |
| |
| static const u16 NCT6779_REG_TEMP[] = { 0x27, 0x150 }; |
| static const u16 NCT6779_REG_TEMP_MON[] = { 0x73, 0x75, 0x77, 0x79, 0x7b }; |
| static const u16 NCT6779_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6779_REG_TEMP)] = { |
| 0x18, 0x152 }; |
| static const u16 NCT6779_REG_TEMP_HYST[ARRAY_SIZE(NCT6779_REG_TEMP)] = { |
| 0x3a, 0x153 }; |
| static const u16 NCT6779_REG_TEMP_OVER[ARRAY_SIZE(NCT6779_REG_TEMP)] = { |
| 0x39, 0x155 }; |
| |
| static const u16 NCT6779_REG_TEMP_OFFSET[] = { |
| 0x454, 0x455, 0x456, 0x44a, 0x44b, 0x44c, 0x44d, 0x449 }; |
| |
| static const char *const nct6779_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "SMBUSMASTER 2", |
| "SMBUSMASTER 3", |
| "SMBUSMASTER 4", |
| "SMBUSMASTER 5", |
| "SMBUSMASTER 6", |
| "SMBUSMASTER 7", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "PCH_DIM0_TEMP", |
| "PCH_DIM1_TEMP", |
| "PCH_DIM2_TEMP", |
| "PCH_DIM3_TEMP", |
| "BYTE_TEMP", |
| "", |
| "", |
| "", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6779_TEMP_MASK 0x07ffff7e |
| #define NCT6779_VIRT_TEMP_MASK 0x00000000 |
| #define NCT6791_TEMP_MASK 0x87ffff7e |
| #define NCT6791_VIRT_TEMP_MASK 0x80000000 |
| |
| static const u16 NCT6779_REG_TEMP_ALTERNATE[32] |
| = { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407, |
| 0x408, 0 }; |
| |
| static const u16 NCT6779_REG_TEMP_CRIT[32] = { |
| [15] = 0x709, |
| [16] = 0x70a, |
| }; |
| |
| /* NCT6791 specific data */ |
| |
| static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[NUM_FAN] = { 0, 0x239 }; |
| static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[NUM_FAN] = { 0, 0x23a }; |
| static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[NUM_FAN] = { 0, 0x23b }; |
| static const u16 NCT6791_REG_WEIGHT_DUTY_STEP[NUM_FAN] = { 0, 0x23c }; |
| static const u16 NCT6791_REG_WEIGHT_TEMP_BASE[NUM_FAN] = { 0, 0x23d }; |
| static const u16 NCT6791_REG_WEIGHT_DUTY_BASE[NUM_FAN] = { 0, 0x23e }; |
| |
| static const u16 NCT6791_REG_ALARM[NUM_REG_ALARM] = { |
| 0x459, 0x45A, 0x45B, 0x568, 0x45D }; |
| |
| static const s8 NCT6791_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 8, 21, 20, 16, 17, 24, 25, 26, /* in0-in11 */ |
| 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, 10, 23, 33, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, 9, /* intr0-intr1 */ |
| }; |
| |
| /* NCT6792/NCT6793 specific data */ |
| |
| static const u16 NCT6792_REG_TEMP_MON[] = { |
| 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d }; |
| static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = { |
| 0xb2, 0xb3, 0xb4, 0xb5, 0xbf }; |
| |
| static const char *const nct6792_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "SMBUSMASTER 2", |
| "SMBUSMASTER 3", |
| "SMBUSMASTER 4", |
| "SMBUSMASTER 5", |
| "SMBUSMASTER 6", |
| "SMBUSMASTER 7", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "PCH_DIM0_TEMP", |
| "PCH_DIM1_TEMP", |
| "PCH_DIM2_TEMP", |
| "PCH_DIM3_TEMP", |
| "BYTE_TEMP", |
| "PECI Agent 0 Calibration", |
| "PECI Agent 1 Calibration", |
| "", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6792_TEMP_MASK 0x9fffff7e |
| #define NCT6792_VIRT_TEMP_MASK 0x80000000 |
| |
| static const char *const nct6793_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "Agent0 Dimm0 ", |
| "Agent0 Dimm1", |
| "Agent1 Dimm0", |
| "Agent1 Dimm1", |
| "BYTE_TEMP0", |
| "BYTE_TEMP1", |
| "PECI Agent 0 Calibration", |
| "PECI Agent 1 Calibration", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6793_TEMP_MASK 0xbfff037e |
| #define NCT6793_VIRT_TEMP_MASK 0x80000000 |
| |
| static const char *const nct6795_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "SMBUSMASTER 2", |
| "SMBUSMASTER 3", |
| "SMBUSMASTER 4", |
| "SMBUSMASTER 5", |
| "SMBUSMASTER 6", |
| "SMBUSMASTER 7", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "Agent0 Dimm0", |
| "Agent0 Dimm1", |
| "Agent1 Dimm0", |
| "Agent1 Dimm1", |
| "BYTE_TEMP0", |
| "BYTE_TEMP1", |
| "PECI Agent 0 Calibration", |
| "PECI Agent 1 Calibration", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6795_TEMP_MASK 0xbfffff7e |
| #define NCT6795_VIRT_TEMP_MASK 0x80000000 |
| |
| static const char *const nct6796_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "AUXTIN4", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "Virtual_TEMP", |
| "Virtual_TEMP", |
| "", |
| "", |
| "", |
| "", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "Agent0 Dimm0", |
| "Agent0 Dimm1", |
| "Agent1 Dimm0", |
| "Agent1 Dimm1", |
| "BYTE_TEMP0", |
| "BYTE_TEMP1", |
| "PECI Agent 0 Calibration", |
| "PECI Agent 1 Calibration", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6796_TEMP_MASK 0xbfff0ffe |
| #define NCT6796_VIRT_TEMP_MASK 0x80000c00 |
| |
| static const u16 NCT6796_REG_TSI_TEMP[] = { 0x409, 0x40b }; |
| |
| static const u16 NCT6798_REG_TEMP[] = { |
| 0x27, 0x150, 0x670, 0x672, 0x674, 0x676, 0x678, 0x67a}; |
| |
| static const u16 NCT6798_REG_TEMP_SOURCE[] = { |
| 0x621, 0x622, 0xc26, 0xc27, 0xc28, 0xc29, 0xc2a, 0xc2b }; |
| |
| static const u16 NCT6798_REG_TEMP_MON[] = { |
| 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d, 0x4a0 }; |
| static const u16 NCT6798_REG_TEMP_OVER[] = { |
| 0x39, 0x155, 0xc1a, 0xc1b, 0xc1c, 0xc1d, 0xc1e, 0xc1f }; |
| static const u16 NCT6798_REG_TEMP_HYST[] = { |
| 0x3a, 0x153, 0xc20, 0xc21, 0xc22, 0xc23, 0xc24, 0xc25 }; |
| |
| static const u16 NCT6798_REG_TEMP_CRIT[32] = { |
| 0x135, 0x235, 0x335, 0x835, 0x935, 0xa35, 0xb35, 0 }; |
| |
| static const u16 NCT6798_REG_TEMP_ALTERNATE[32] = { |
| 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0x496, 0, |
| 0, 0, 0, 0, 0x4a2, 0, 0, 0, |
| 0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407, |
| 0x408, 0x419, 0x41a, 0x4f4, 0x4f5 }; |
| |
| static const char *const nct6798_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "AUXTIN4", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "Virtual_TEMP", |
| "Virtual_TEMP", |
| "", |
| "", |
| "", |
| "", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "Agent0 Dimm0", |
| "Agent0 Dimm1", |
| "Agent1 Dimm0", |
| "Agent1 Dimm1", |
| "BYTE_TEMP0", |
| "BYTE_TEMP1", |
| "PECI Agent 0 Calibration", /* undocumented */ |
| "PECI Agent 1 Calibration", /* undocumented */ |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6798_TEMP_MASK 0xbfff0ffe |
| #define NCT6798_VIRT_TEMP_MASK 0x80000c00 |
| |
| static const u16 NCT6799_REG_ALARM[NUM_REG_ALARM] = { |
| 0x459, 0x45A, 0x45B, 0x568, 0x45D, 0xc01 }; |
| |
| static const s8 NCT6799_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 8, -1, 20, 16, 17, 24, 25, 26, /* in0-in11 */ |
| 27, 28, 29, 30, 31, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 6, 7, 11, 10, 23, 33, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 4, 5, 40, 41, 42, 43, 44, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 12, 9, /* intr0-intr1 */ |
| }; |
| |
| static const s8 NCT6799_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, /* in0-in11 */ |
| 12, 13, 14, 15, 34, 35, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, 19, 20, 21, 22, 23, -1, -1, -1, -1, /* temp1-temp12 */ |
| 30, 31, 24 /* intr0-intr1, beep_en */ |
| }; |
| |
| /* PECI Calibration only for NCT6799D, not NCT6796D-S */ |
| static const char *const nct6799_temp_label[] = { |
| "", |
| "SYSTIN", |
| "CPUTIN", |
| "AUXTIN0", |
| "AUXTIN1", |
| "AUXTIN2", |
| "AUXTIN3", |
| "AUXTIN4", |
| "SMBUSMASTER 0", |
| "SMBUSMASTER 1", |
| "Virtual_TEMP", |
| "Virtual_TEMP", |
| "", |
| "AUXTIN5", |
| "", |
| "", |
| "PECI Agent 0", |
| "PECI Agent 1", |
| "PCH_CHIP_CPU_MAX_TEMP", |
| "PCH_CHIP_TEMP", |
| "PCH_CPU_TEMP", |
| "PCH_MCH_TEMP", |
| "Agent0 Dimm0", |
| "Agent0 Dimm1", |
| "Agent1 Dimm0", |
| "Agent1 Dimm1", |
| "BYTE_TEMP0", |
| "BYTE_TEMP1", |
| "PECI/TSI Agent 0 Calibration", |
| "PECI/TSI Agent 1 Calibration", |
| "", |
| "Virtual_TEMP" |
| }; |
| |
| #define NCT6799_TEMP_MASK 0xbfff2ffe |
| #define NCT6799_VIRT_TEMP_MASK 0x80000c00 |
| |
| /* NCT6102D/NCT6106D specific data */ |
| |
| #define NCT6106_REG_VBAT 0x318 |
| #define NCT6106_REG_DIODE 0x319 |
| #define NCT6106_DIODE_MASK 0x01 |
| |
| static const u16 NCT6106_REG_IN_MAX[] = { |
| 0x90, 0x92, 0x94, 0x96, 0x98, 0x9a, 0x9e, 0xa0, 0xa2 }; |
| static const u16 NCT6106_REG_IN_MIN[] = { |
| 0x91, 0x93, 0x95, 0x97, 0x99, 0x9b, 0x9f, 0xa1, 0xa3 }; |
| static const u16 NCT6106_REG_IN[] = { |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09 }; |
| |
| static const u16 NCT6106_REG_TEMP[] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15 }; |
| static const u16 NCT6106_REG_TEMP_MON[] = { 0x18, 0x19, 0x1a }; |
| static const u16 NCT6106_REG_TEMP_HYST[] = { |
| 0xc3, 0xc7, 0xcb, 0xcf, 0xd3, 0xd7 }; |
| static const u16 NCT6106_REG_TEMP_OVER[] = { |
| 0xc2, 0xc6, 0xca, 0xce, 0xd2, 0xd6 }; |
| static const u16 NCT6106_REG_TEMP_CRIT_L[] = { |
| 0xc0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4 }; |
| static const u16 NCT6106_REG_TEMP_CRIT_H[] = { |
| 0xc1, 0xc5, 0xc9, 0xcf, 0xd1, 0xd5 }; |
| static const u16 NCT6106_REG_TEMP_OFFSET[] = { 0x311, 0x312, 0x313 }; |
| static const u16 NCT6106_REG_TEMP_CONFIG[] = { |
| 0xb7, 0xb8, 0xb9, 0xba, 0xbb, 0xbc }; |
| |
| static const u16 NCT6106_REG_FAN[] = { 0x20, 0x22, 0x24 }; |
| static const u16 NCT6106_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4 }; |
| static const u16 NCT6106_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6 }; |
| static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4 }; |
| |
| static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 }; |
| static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 }; |
| static const u16 NCT6106_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c }; |
| static const u16 NCT6106_REG_FAN_MODE[] = { 0x113, 0x123, 0x133 }; |
| static const u16 NCT6106_REG_TEMP_SOURCE[] = { |
| 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5 }; |
| |
| static const u16 NCT6106_REG_CRITICAL_TEMP[] = { 0x11a, 0x12a, 0x13a }; |
| static const u16 NCT6106_REG_CRITICAL_TEMP_TOLERANCE[] = { |
| 0x11b, 0x12b, 0x13b }; |
| |
| static const u16 NCT6106_REG_CRITICAL_PWM_ENABLE[] = { 0x11c, 0x12c, 0x13c }; |
| #define NCT6106_CRITICAL_PWM_ENABLE_MASK 0x10 |
| static const u16 NCT6106_REG_CRITICAL_PWM[] = { 0x11d, 0x12d, 0x13d }; |
| |
| static const u16 NCT6106_REG_FAN_STEP_UP_TIME[] = { 0x114, 0x124, 0x134 }; |
| static const u16 NCT6106_REG_FAN_STEP_DOWN_TIME[] = { 0x115, 0x125, 0x135 }; |
| static const u16 NCT6106_REG_FAN_STOP_OUTPUT[] = { 0x116, 0x126, 0x136 }; |
| static const u16 NCT6106_REG_FAN_START_OUTPUT[] = { 0x117, 0x127, 0x137 }; |
| static const u16 NCT6106_REG_FAN_STOP_TIME[] = { 0x118, 0x128, 0x138 }; |
| static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 }; |
| |
| static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 }; |
| |
| static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 }; |
| static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 }; |
| static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a }; |
| static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b }; |
| static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c }; |
| static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d }; |
| |
| static const u16 NCT6106_REG_AUTO_TEMP[] = { 0x160, 0x170, 0x180 }; |
| static const u16 NCT6106_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184 }; |
| |
| static const u16 NCT6106_REG_ALARM[NUM_REG_ALARM] = { |
| 0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d }; |
| |
| static const s8 NCT6106_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 4, 5, 7, 8, 9, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 32, 33, 34, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 48, -1, /* intr0-intr1 */ |
| }; |
| |
| static const u16 NCT6106_REG_BEEP[NUM_REG_BEEP] = { |
| 0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4 }; |
| |
| static const s8 NCT6106_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 24, 25, 26, 27, 28, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 34, -1, 32 /* intr0-intr1, beep_en */ |
| }; |
| |
| static const u16 NCT6106_REG_TEMP_ALTERNATE[32] = { |
| [14] = 0x51, |
| [15] = 0x52, |
| [16] = 0x54, |
| }; |
| |
| static const u16 NCT6106_REG_TEMP_CRIT[32] = { |
| [11] = 0x204, |
| [12] = 0x205, |
| }; |
| |
| static const u16 NCT6106_REG_TSI_TEMP[] = { 0x59, 0x5b, 0x5d, 0x5f, 0x61, 0x63, 0x65, 0x67 }; |
| |
| /* NCT6112D/NCT6114D/NCT6116D specific data */ |
| |
| static const u16 NCT6116_REG_FAN[] = { 0x20, 0x22, 0x24, 0x26, 0x28 }; |
| static const u16 NCT6116_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4, 0xe6, 0xe8 }; |
| static const u16 NCT6116_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0xf6, 0xf5 }; |
| static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 }; |
| |
| static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 }; |
| static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3 }; |
| static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0 }; |
| static const u16 NCT6116_REG_TEMP_SOURCE[] = { |
| 0xb0, 0xb1, 0xb2 }; |
| |
| static const u16 NCT6116_REG_CRITICAL_TEMP[] = { |
| 0x11a, 0x12a, 0x13a, 0x19a, 0x1aa }; |
| static const u16 NCT6116_REG_CRITICAL_TEMP_TOLERANCE[] = { |
| 0x11b, 0x12b, 0x13b, 0x19b, 0x1ab }; |
| |
| static const u16 NCT6116_REG_CRITICAL_PWM_ENABLE[] = { |
| 0x11c, 0x12c, 0x13c, 0x19c, 0x1ac }; |
| static const u16 NCT6116_REG_CRITICAL_PWM[] = { |
| 0x11d, 0x12d, 0x13d, 0x19d, 0x1ad }; |
| |
| static const u16 NCT6116_REG_FAN_STEP_UP_TIME[] = { |
| 0x114, 0x124, 0x134, 0x194, 0x1a4 }; |
| static const u16 NCT6116_REG_FAN_STEP_DOWN_TIME[] = { |
| 0x115, 0x125, 0x135, 0x195, 0x1a5 }; |
| static const u16 NCT6116_REG_FAN_STOP_OUTPUT[] = { |
| 0x116, 0x126, 0x136, 0x196, 0x1a6 }; |
| static const u16 NCT6116_REG_FAN_START_OUTPUT[] = { |
| 0x117, 0x127, 0x137, 0x197, 0x1a7 }; |
| static const u16 NCT6116_REG_FAN_STOP_TIME[] = { |
| 0x118, 0x128, 0x138, 0x198, 0x1a8 }; |
| static const u16 NCT6116_REG_TOLERANCE_H[] = { |
| 0x112, 0x122, 0x132, 0x192, 0x1a2 }; |
| |
| static const u16 NCT6116_REG_TARGET[] = { |
| 0x111, 0x121, 0x131, 0x191, 0x1a1 }; |
| |
| static const u16 NCT6116_REG_AUTO_TEMP[] = { |
| 0x160, 0x170, 0x180, 0x1d0, 0x1e0 }; |
| static const u16 NCT6116_REG_AUTO_PWM[] = { |
| 0x164, 0x174, 0x184, 0x1d4, 0x1e4 }; |
| |
| static const s8 NCT6116_ALARM_BITS[NUM_ALARM_BITS] = { |
| 0, 1, 2, 3, 4, 5, 7, 8, 9, -1, -1, -1, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 32, 33, 34, 35, 36, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 48, -1, /* intr0-intr1 */ |
| }; |
| |
| static const s8 NCT6116_BEEP_BITS[NUM_BEEP_BITS] = { |
| 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, /* in0-in11 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ |
| 24, 25, 26, 27, 28, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ |
| 16, 17, 18, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ |
| 34, -1, 32 /* intr0-intr1, beep_en */ |
| }; |
| |
| static const u16 NCT6116_REG_TSI_TEMP[] = { 0x59, 0x5b }; |
| |
| static enum pwm_enable reg_to_pwm_enable(int pwm, int mode) |
| { |
| if (mode == 0 && pwm == 255) |
| return off; |
| return mode + 1; |
| } |
| |
| static int pwm_enable_to_reg(enum pwm_enable mode) |
| { |
| if (mode == off) |
| return 0; |
| return mode - 1; |
| } |
| |
| /* |
| * Conversions |
| */ |
| |
| /* 1 is DC mode, output in ms */ |
| static unsigned int step_time_from_reg(u8 reg, u8 mode) |
| { |
| return mode ? 400 * reg : 100 * reg; |
| } |
| |
| static u8 step_time_to_reg(unsigned int msec, u8 mode) |
| { |
| return clamp_val((mode ? (msec + 200) / 400 : |
| (msec + 50) / 100), 1, 255); |
| } |
| |
| static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) |
| { |
| if (reg == 0 || reg == 255) |
| return 0; |
| return 1350000U / (reg << divreg); |
| } |
| |
| static unsigned int fan_from_reg13(u16 reg, unsigned int divreg) |
| { |
| if ((reg & 0xff1f) == 0xff1f) |
| return 0; |
| |
| reg = (reg & 0x1f) | ((reg & 0xff00) >> 3); |
| |
| if (reg == 0) |
| return 0; |
| |
| return 1350000U / reg; |
| } |
| |
| static unsigned int fan_from_reg16(u16 reg, unsigned int divreg) |
| { |
| if (reg == 0 || reg == 0xffff) |
| return 0; |
| |
| /* |
| * Even though the registers are 16 bit wide, the fan divisor |
| * still applies. |
| */ |
| return 1350000U / (reg << divreg); |
| } |
| |
| static unsigned int fan_from_reg_rpm(u16 reg, unsigned int divreg) |
| { |
| return reg; |
| } |
| |
| static u16 fan_to_reg(u32 fan, unsigned int divreg) |
| { |
| if (!fan) |
| return 0; |
| |
| return (1350000U / fan) >> divreg; |
| } |
| |
| static inline unsigned int |
| div_from_reg(u8 reg) |
| { |
| return BIT(reg); |
| } |
| |
| /* |
| * Some of the voltage inputs have internal scaling, the tables below |
| * contain 8 (the ADC LSB in mV) * scaling factor * 100 |
| */ |
| static const u16 scale_in[15] = { |
| 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800, 800, 800, 800, |
| 800, 800 |
| }; |
| |
| /* |
| * NCT6798 scaling: |
| * CPUVC, IN1, AVSB, 3VCC, IN0, IN8, IN4, 3VSB, VBAT, VTT, IN5, IN6, IN2, |
| * IN3, IN7, IN9, VHIF, IN10 |
| * 15-17 for NCT6799 only |
| */ |
| static const u16 scale_in_6798[NUM_IN] = { |
| 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 1600, 1600, 1600, 800, |
| 800, 800, 800, 1600, 800 |
| }; |
| |
| static inline long in_from_reg(u8 reg, u8 nr, const u16 *scales) |
| { |
| return DIV_ROUND_CLOSEST(reg * scales[nr], 100); |
| } |
| |
| static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scales) |
| { |
| return clamp_val(DIV_ROUND_CLOSEST(val * 100, scales[nr]), 0, 255); |
| } |
| |
| /* TSI temperatures are in 8.3 format */ |
| static inline unsigned int tsi_temp_from_reg(unsigned int reg) |
| { |
| return (reg >> 5) * 125; |
| } |
| |
| /* |
| * Data structures and manipulation thereof |
| */ |
| |
| struct sensor_device_template { |
| struct device_attribute dev_attr; |
| union { |
| struct { |
| u8 nr; |
| u8 index; |
| } s; |
| int index; |
| } u; |
| bool s2; /* true if both index and nr are used */ |
| }; |
| |
| struct sensor_device_attr_u { |
| union { |
| struct sensor_device_attribute a1; |
| struct sensor_device_attribute_2 a2; |
| } u; |
| char name[32]; |
| }; |
| |
| #define __TEMPLATE_ATTR(_template, _mode, _show, _store) { \ |
| .attr = {.name = _template, .mode = _mode }, \ |
| .show = _show, \ |
| .store = _store, \ |
| } |
| |
| #define SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, _index) \ |
| { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ |
| .u.index = _index, \ |
| .s2 = false } |
| |
| #define SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ |
| _nr, _index) \ |
| { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ |
| .u.s.index = _index, \ |
| .u.s.nr = _nr, \ |
| .s2 = true } |
| |
| #define SENSOR_TEMPLATE(_name, _template, _mode, _show, _store, _index) \ |
| static struct sensor_device_template sensor_dev_template_##_name \ |
| = SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, \ |
| _index) |
| |
| #define SENSOR_TEMPLATE_2(_name, _template, _mode, _show, _store, \ |
| _nr, _index) \ |
| static struct sensor_device_template sensor_dev_template_##_name \ |
| = SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ |
| _nr, _index) |
| |
| struct sensor_template_group { |
| struct sensor_device_template **templates; |
| umode_t (*is_visible)(struct kobject *, struct attribute *, int); |
| int base; |
| }; |
| |
| static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_data *data, |
| const struct sensor_template_group *tg, int repeat) |
| { |
| struct attribute_group *group; |
| struct sensor_device_attr_u *su; |
| struct sensor_device_attribute *a; |
| struct sensor_device_attribute_2 *a2; |
| struct attribute **attrs; |
| struct sensor_device_template **t; |
| int i, count; |
| |
| if (repeat <= 0) |
| return -EINVAL; |
| |
| t = tg->templates; |
| for (count = 0; *t; t++, count++) |
| ; |
| |
| if (count == 0) |
| return -EINVAL; |
| |
| group = devm_kzalloc(dev, sizeof(*group), GFP_KERNEL); |
| if (group == NULL) |
| return -ENOMEM; |
| |
| attrs = devm_kcalloc(dev, repeat * count + 1, sizeof(*attrs), |
| GFP_KERNEL); |
| if (attrs == NULL) |
| return -ENOMEM; |
| |
| su = devm_kzalloc(dev, array3_size(repeat, count, sizeof(*su)), |
| GFP_KERNEL); |
| if (su == NULL) |
| return -ENOMEM; |
| |
| group->attrs = attrs; |
| group->is_visible = tg->is_visible; |
| |
| for (i = 0; i < repeat; i++) { |
| t = tg->templates; |
| while (*t != NULL) { |
| snprintf(su->name, sizeof(su->name), |
| (*t)->dev_attr.attr.name, tg->base + i); |
| if ((*t)->s2) { |
| a2 = &su->u.a2; |
| sysfs_attr_init(&a2->dev_attr.attr); |
| a2->dev_attr.attr.name = su->name; |
| a2->nr = (*t)->u.s.nr + i; |
| a2->index = (*t)->u.s.index; |
| a2->dev_attr.attr.mode = |
| (*t)->dev_attr.attr.mode; |
| a2->dev_attr.show = (*t)->dev_attr.show; |
| a2->dev_attr.store = (*t)->dev_attr.store; |
| *attrs = &a2->dev_attr.attr; |
| } else { |
| a = &su->u.a1; |
| sysfs_attr_init(&a->dev_attr.attr); |
| a->dev_attr.attr.name = su->name; |
| a->index = (*t)->u.index + i; |
| a->dev_attr.attr.mode = |
| (*t)->dev_attr.attr.mode; |
| a->dev_attr.show = (*t)->dev_attr.show; |
| a->dev_attr.store = (*t)->dev_attr.store; |
| *attrs = &a->dev_attr.attr; |
| } |
| attrs++; |
| su++; |
| t++; |
| } |
| } |
| |
| return nct6775_add_attr_group(data, group); |
| } |
| |
| bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg) |
| { |
| switch (data->kind) { |
| case nct6106: |
| return reg == 0x20 || reg == 0x22 || reg == 0x24 || |
| (reg >= 0x59 && reg < 0x69 && (reg & 1)) || |
| reg == 0xe0 || reg == 0xe2 || reg == 0xe4 || |
| reg == 0x111 || reg == 0x121 || reg == 0x131; |
| case nct6116: |
| return reg == 0x20 || reg == 0x22 || reg == 0x24 || |
| reg == 0x26 || reg == 0x28 || reg == 0x59 || reg == 0x5b || |
| reg == 0xe0 || reg == 0xe2 || reg == 0xe4 || reg == 0xe6 || |
| reg == 0xe8 || reg == 0x111 || reg == 0x121 || reg == 0x131 || |
| reg == 0x191 || reg == 0x1a1; |
| case nct6775: |
| return (((reg & 0xff00) == 0x100 || |
| (reg & 0xff00) == 0x200) && |
| ((reg & 0x00ff) == 0x50 || |
| (reg & 0x00ff) == 0x53 || |
| (reg & 0x00ff) == 0x55)) || |
| (reg & 0xfff0) == 0x630 || |
| reg == 0x640 || reg == 0x642 || |
| reg == 0x662 || reg == 0x669 || |
| ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || |
| reg == 0x73 || reg == 0x75 || reg == 0x77; |
| case nct6776: |
| return (((reg & 0xff00) == 0x100 || |
| (reg & 0xff00) == 0x200) && |
| ((reg & 0x00ff) == 0x50 || |
| (reg & 0x00ff) == 0x53 || |
| (reg & 0x00ff) == 0x55)) || |
| (reg & 0xfff0) == 0x630 || |
| reg == 0x402 || |
| (reg >= 0x409 && reg < 0x419 && (reg & 1)) || |
| reg == 0x640 || reg == 0x642 || |
| ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || |
| reg == 0x73 || reg == 0x75 || reg == 0x77; |
| case nct6779: |
| case nct6791: |
| case nct6792: |
| case nct6793: |
| case nct6795: |
| case nct6796: |
| case nct6797: |
| case nct6798: |
| case nct6799: |
| return reg == 0x150 || reg == 0x153 || reg == 0x155 || |
| (reg & 0xfff0) == 0x4c0 || |
| reg == 0x402 || |
| (reg >= 0x409 && reg < 0x419 && (reg & 1)) || |
| reg == 0x63a || reg == 0x63c || reg == 0x63e || |
| reg == 0x640 || reg == 0x642 || reg == 0x64a || |
| reg == 0x64c || |
| reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 || |
| reg == 0x7b || reg == 0x7d; |
| } |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(nct6775_reg_is_word_sized); |
| |
| /* We left-align 8-bit temperature values to make the code simpler */ |
| static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val) |
| { |
| int err; |
| |
| err = nct6775_read_value(data, reg, val); |
| if (err) |
| return err; |
| |
| if (!nct6775_reg_is_word_sized(data, reg)) |
| *val <<= 8; |
| |
| return 0; |
| } |
| |
| /* This function assumes that the caller holds data->update_lock */ |
| static int nct6775_write_fan_div(struct nct6775_data *data, int nr) |
| { |
| u16 reg; |
| int err; |
| u16 fandiv_reg = nr < 2 ? NCT6775_REG_FANDIV1 : NCT6775_REG_FANDIV2; |
| unsigned int oddshift = (nr & 1) * 4; /* masks shift by four if nr is odd */ |
| |
| err = nct6775_read_value(data, fandiv_reg, ®); |
| if (err) |
| return err; |
| reg &= 0x70 >> oddshift; |
| reg |= (data->fan_div[nr] & 0x7) << oddshift; |
| return nct6775_write_value(data, fandiv_reg, reg); |
| } |
| |
| static int nct6775_write_fan_div_common(struct nct6775_data *data, int nr) |
| { |
| if (data->kind == nct6775) |
| return nct6775_write_fan_div(data, nr); |
| return 0; |
| } |
| |
| static int nct6775_update_fan_div(struct nct6775_data *data) |
| { |
| int err; |
| u16 i; |
| |
| err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &i); |
| if (err) |
| return err; |
| data->fan_div[0] = i & 0x7; |
| data->fan_div[1] = (i & 0x70) >> 4; |
| err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &i); |
| if (err) |
| return err; |
| data->fan_div[2] = i & 0x7; |
| if (data->has_fan & BIT(3)) |
| data->fan_div[3] = (i & 0x70) >> 4; |
| |
| return 0; |
| } |
| |
| static int nct6775_update_fan_div_common(struct nct6775_data *data) |
| { |
| if (data->kind == nct6775) |
| return nct6775_update_fan_div(data); |
| return 0; |
| } |
| |
| static int nct6775_init_fan_div(struct nct6775_data *data) |
| { |
| int i, err; |
| |
| err = nct6775_update_fan_div_common(data); |
| if (err) |
| return err; |
| |
| /* |
| * For all fans, start with highest divider value if the divider |
| * register is not initialized. This ensures that we get a |
| * reading from the fan count register, even if it is not optimal. |
| * We'll compute a better divider later on. |
| */ |
| for (i = 0; i < ARRAY_SIZE(data->fan_div); i++) { |
| if (!(data->has_fan & BIT(i))) |
| continue; |
| if (data->fan_div[i] == 0) { |
| data->fan_div[i] = 7; |
| err = nct6775_write_fan_div_common(data, i); |
| if (err) |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int nct6775_init_fan_common(struct device *dev, |
| struct nct6775_data *data) |
| { |
| int i, err; |
| u16 reg; |
| |
| if (data->has_fan_div) { |
| err = nct6775_init_fan_div(data); |
| if (err) |
| return err; |
| } |
| |
| /* |
| * If fan_min is not set (0), set it to 0xff to disable it. This |
| * prevents the unnecessary warning when fanX_min is reported as 0. |
| */ |
| for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { |
| if (data->has_fan_min & BIT(i)) { |
| err = nct6775_read_value(data, data->REG_FAN_MIN[i], ®); |
| if (err) |
| return err; |
| if (!reg) { |
| err = nct6775_write_value(data, data->REG_FAN_MIN[i], |
| data->has_fan_div ? 0xff : 0xff1f); |
| if (err) |
| return err; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int nct6775_select_fan_div(struct device *dev, |
| struct nct6775_data *data, int nr, u16 reg) |
| { |
| int err; |
| u8 fan_div = data->fan_div[nr]; |
| u16 fan_min; |
| |
| if (!data->has_fan_div) |
| return 0; |
| |
| /* |
| * If we failed to measure the fan speed, or the reported value is not |
| * in the optimal range, and the clock divider can be modified, |
| * let's try that for next time. |
| */ |
| if (reg == 0x00 && fan_div < 0x07) |
| fan_div++; |
| else if (reg != 0x00 && reg < 0x30 && fan_div > 0) |
| fan_div--; |
| |
| if (fan_div != data->fan_div[nr]) { |
| dev_dbg(dev, "Modifying fan%d clock divider from %u to %u\n", |
| nr + 1, div_from_reg(data->fan_div[nr]), |
| div_from_reg(fan_div)); |
| |
| /* Preserve min limit if possible */ |
| if (data->has_fan_min & BIT(nr)) { |
| fan_min = data->fan_min[nr]; |
| if (fan_div > data->fan_div[nr]) { |
| if (fan_min != 255 && fan_min > 1) |
| fan_min >>= 1; |
| } else { |
| if (fan_min != 255) { |
| fan_min <<= 1; |
| if (fan_min > 254) |
| fan_min = 254; |
| } |
| } |
| if (fan_min != data->fan_min[nr]) { |
| data->fan_min[nr] = fan_min; |
| err = nct6775_write_value(data, data->REG_FAN_MIN[nr], fan_min); |
| if (err) |
| return err; |
| } |
| } |
| data->fan_div[nr] = fan_div; |
| err = nct6775_write_fan_div_common(data, nr); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int nct6775_update_pwm(struct device *dev) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int i, j, err; |
| u16 fanmodecfg, reg; |
| bool duty_is_dc; |
| |
| for (i = 0; i < data->pwm_num; i++) { |
| if (!(data->has_pwm & BIT(i))) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_PWM_MODE[i], ®); |
| if (err) |
| return err; |
| duty_is_dc = data->REG_PWM_MODE[i] && (reg & data->PWM_MODE_MASK[i]); |
| data->pwm_mode[i] = !duty_is_dc; |
| |
| err = nct6775_read_value(data, data->REG_FAN_MODE[i], &fanmodecfg); |
| if (err) |
| return err; |
| for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) { |
| if (data->REG_PWM[j] && data->REG_PWM[j][i]) { |
| err = nct6775_read_value(data, data->REG_PWM[j][i], ®); |
| if (err) |
| return err; |
| data->pwm[j][i] = reg; |
| } |
| } |
| |
| data->pwm_enable[i] = reg_to_pwm_enable(data->pwm[0][i], |
| (fanmodecfg >> 4) & 7); |
| |
| if (!data->temp_tolerance[0][i] || |
| data->pwm_enable[i] != speed_cruise) |
| data->temp_tolerance[0][i] = fanmodecfg & 0x0f; |
| if (!data->target_speed_tolerance[i] || |
| data->pwm_enable[i] == speed_cruise) { |
| u8 t = fanmodecfg & 0x0f; |
| |
| if (data->REG_TOLERANCE_H) { |
| err = nct6775_read_value(data, data->REG_TOLERANCE_H[i], ®); |
| if (err) |
| return err; |
| t |= (reg & 0x70) >> 1; |
| } |
| data->target_speed_tolerance[i] = t; |
| } |
| |
| err = nct6775_read_value(data, data->REG_CRITICAL_TEMP_TOLERANCE[i], ®); |
| if (err) |
| return err; |
| data->temp_tolerance[1][i] = reg; |
| |
| err = nct6775_read_value(data, data->REG_TEMP_SEL[i], ®); |
| if (err) |
| return err; |
| data->pwm_temp_sel[i] = reg & 0x1f; |
| /* If fan can stop, report floor as 0 */ |
| if (reg & 0x80) |
| data->pwm[2][i] = 0; |
| |
| if (!data->REG_WEIGHT_TEMP_SEL[i]) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[i], ®); |
| if (err) |
| return err; |
| data->pwm_weight_temp_sel[i] = reg & 0x1f; |
| /* If weight is disabled, report weight source as 0 */ |
| if (!(reg & 0x80)) |
| data->pwm_weight_temp_sel[i] = 0; |
| |
| /* Weight temp data */ |
| for (j = 0; j < ARRAY_SIZE(data->weight_temp); j++) { |
| err = nct6775_read_value(data, data->REG_WEIGHT_TEMP[j][i], ®); |
| if (err) |
| return err; |
| data->weight_temp[j][i] = reg; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int nct6775_update_pwm_limits(struct device *dev) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int i, j, err; |
| u16 reg, reg_t; |
| |
| for (i = 0; i < data->pwm_num; i++) { |
| if (!(data->has_pwm & BIT(i))) |
| continue; |
| |
| for (j = 0; j < ARRAY_SIZE(data->fan_time); j++) { |
| err = nct6775_read_value(data, data->REG_FAN_TIME[j][i], ®); |
| if (err) |
| return err; |
| data->fan_time[j][i] = reg; |
| } |
| |
| err = nct6775_read_value(data, data->REG_TARGET[i], ®_t); |
| if (err) |
| return err; |
| |
| /* Update only in matching mode or if never updated */ |
| if (!data->target_temp[i] || |
| data->pwm_enable[i] == thermal_cruise) |
| data->target_temp[i] = reg_t & data->target_temp_mask; |
| if (!data->target_speed[i] || |
| data->pwm_enable[i] == speed_cruise) { |
| if (data->REG_TOLERANCE_H) { |
| err = nct6775_read_value(data, data->REG_TOLERANCE_H[i], ®); |
| if (err) |
| return err; |
| reg_t |= (reg & 0x0f) << 8; |
| } |
| data->target_speed[i] = reg_t; |
| } |
| |
| for (j = 0; j < data->auto_pwm_num; j++) { |
| err = nct6775_read_value(data, NCT6775_AUTO_PWM(data, i, j), ®); |
| if (err) |
| return err; |
| data->auto_pwm[i][j] = reg; |
| |
| err = nct6775_read_value(data, NCT6775_AUTO_TEMP(data, i, j), ®); |
| if (err) |
| return err; |
| data->auto_temp[i][j] = reg; |
| } |
| |
| /* critical auto_pwm temperature data */ |
| err = nct6775_read_value(data, data->REG_CRITICAL_TEMP[i], ®); |
| if (err) |
| return err; |
| data->auto_temp[i][data->auto_pwm_num] = reg; |
| |
| switch (data->kind) { |
| case nct6775: |
| err = nct6775_read_value(data, NCT6775_REG_CRITICAL_ENAB[i], ®); |
| if (err) |
| return err; |
| data->auto_pwm[i][data->auto_pwm_num] = |
| (reg & 0x02) ? 0xff : 0x00; |
| break; |
| case nct6776: |
| data->auto_pwm[i][data->auto_pwm_num] = 0xff; |
| break; |
| case nct6106: |
| case nct6116: |
| case nct6779: |
| case nct6791: |
| case nct6792: |
| case nct6793: |
| case nct6795: |
| case nct6796: |
| case nct6797: |
| case nct6798: |
| case nct6799: |
| err = nct6775_read_value(data, data->REG_CRITICAL_PWM_ENABLE[i], ®); |
| if (err) |
| return err; |
| if (reg & data->CRITICAL_PWM_ENABLE_MASK) { |
| err = nct6775_read_value(data, data->REG_CRITICAL_PWM[i], ®); |
| if (err) |
| return err; |
| } else { |
| reg = 0xff; |
| } |
| data->auto_pwm[i][data->auto_pwm_num] = reg; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| struct nct6775_data *nct6775_update_device(struct device *dev) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int i, j, err = 0; |
| u16 reg; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| || !data->valid) { |
| /* Fan clock dividers */ |
| err = nct6775_update_fan_div_common(data); |
| if (err) |
| goto out; |
| |
| /* Measured voltages and limits */ |
| for (i = 0; i < data->in_num; i++) { |
| if (!(data->have_in & BIT(i))) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_VIN[i], ®); |
| if (err) |
| goto out; |
| data->in[i][0] = reg; |
| |
| err = nct6775_read_value(data, data->REG_IN_MINMAX[0][i], ®); |
| if (err) |
| goto out; |
| data->in[i][1] = reg; |
| |
| err = nct6775_read_value(data, data->REG_IN_MINMAX[1][i], ®); |
| if (err) |
| goto out; |
| data->in[i][2] = reg; |
| } |
| |
| /* Measured fan speeds and limits */ |
| for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { |
| if (!(data->has_fan & BIT(i))) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_FAN[i], ®); |
| if (err) |
| goto out; |
| data->rpm[i] = data->fan_from_reg(reg, |
| data->fan_div[i]); |
| |
| if (data->has_fan_min & BIT(i)) { |
| err = nct6775_read_value(data, data->REG_FAN_MIN[i], ®); |
| if (err) |
| goto out; |
| data->fan_min[i] = reg; |
| } |
| |
| if (data->REG_FAN_PULSES[i]) { |
| err = nct6775_read_value(data, data->REG_FAN_PULSES[i], ®); |
| if (err) |
| goto out; |
| data->fan_pulses[i] = (reg >> data->FAN_PULSE_SHIFT[i]) & 0x03; |
| } |
| |
| err = nct6775_select_fan_div(dev, data, i, reg); |
| if (err) |
| goto out; |
| } |
| |
| err = nct6775_update_pwm(dev); |
| if (err) |
| goto out; |
| |
| err = nct6775_update_pwm_limits(dev); |
| if (err) |
| goto out; |
| |
| /* Measured temperatures and limits */ |
| for (i = 0; i < NUM_TEMP; i++) { |
| if (!(data->have_temp & BIT(i))) |
| continue; |
| for (j = 0; j < ARRAY_SIZE(data->reg_temp); j++) { |
| if (data->reg_temp[j][i]) { |
| err = nct6775_read_temp(data, data->reg_temp[j][i], ®); |
| if (err) |
| goto out; |
| data->temp[j][i] = reg; |
| } |
| } |
| if (i >= NUM_TEMP_FIXED || |
| !(data->have_temp_fixed & BIT(i))) |
| continue; |
| err = nct6775_read_value(data, data->REG_TEMP_OFFSET[i], ®); |
| if (err) |
| goto out; |
| data->temp_offset[i] = reg; |
| } |
| |
| for (i = 0; i < NUM_TSI_TEMP; i++) { |
| if (!(data->have_tsi_temp & BIT(i))) |
| continue; |
| err = nct6775_read_value(data, data->REG_TSI_TEMP[i], ®); |
| if (err) |
| goto out; |
| data->tsi_temp[i] = reg; |
| } |
| |
| data->alarms = 0; |
| for (i = 0; i < NUM_REG_ALARM; i++) { |
| u16 alarm; |
| |
| if (!data->REG_ALARM[i]) |
| continue; |
| err = nct6775_read_value(data, data->REG_ALARM[i], &alarm); |
| if (err) |
| goto out; |
| data->alarms |= ((u64)alarm) << (i << 3); |
| } |
| |
| data->beeps = 0; |
| for (i = 0; i < NUM_REG_BEEP; i++) { |
| u16 beep; |
| |
| if (!data->REG_BEEP[i]) |
| continue; |
| err = nct6775_read_value(data, data->REG_BEEP[i], &beep); |
| if (err) |
| goto out; |
| data->beeps |= ((u64)beep) << (i << 3); |
| } |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| out: |
| mutex_unlock(&data->update_lock); |
| return err ? ERR_PTR(err) : data; |
| } |
| EXPORT_SYMBOL_GPL(nct6775_update_device); |
| |
| /* |
| * Sysfs callback functions |
| */ |
| static ssize_t |
| show_in_reg(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int index = sattr->index; |
| int nr = sattr->nr; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%ld\n", |
| in_from_reg(data->in[nr][index], nr, data->scale_in)); |
| } |
| |
| static ssize_t |
| store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int index = sattr->index; |
| int nr = sattr->nr; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| mutex_lock(&data->update_lock); |
| data->in[nr][index] = in_to_reg(val, nr, data->scale_in); |
| err = nct6775_write_value(data, data->REG_IN_MINMAX[index - 1][nr], data->in[nr][index]); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| ssize_t |
| nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| nr = data->ALARM_BITS[sattr->index]; |
| return sprintf(buf, "%u\n", |
| (unsigned int)((data->alarms >> nr) & 0x01)); |
| } |
| EXPORT_SYMBOL_GPL(nct6775_show_alarm); |
| |
| static int find_temp_source(struct nct6775_data *data, int index, int count) |
| { |
| int source = data->temp_src[index]; |
| int nr, err; |
| |
| for (nr = 0; nr < count; nr++) { |
| u16 src; |
| |
| err = nct6775_read_value(data, data->REG_TEMP_SOURCE[nr], &src); |
| if (err) |
| return err; |
| if ((src & 0x1f) == source) |
| return nr; |
| } |
| return -ENODEV; |
| } |
| |
| static ssize_t |
| show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| struct nct6775_data *data = nct6775_update_device(dev); |
| unsigned int alarm = 0; |
| int nr; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| /* |
| * For temperatures, there is no fixed mapping from registers to alarm |
| * bits. Alarm bits are determined by the temperature source mapping. |
| */ |
| nr = find_temp_source(data, sattr->index, data->num_temp_alarms); |
| if (nr >= 0) { |
| int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE]; |
| |
| alarm = (data->alarms >> bit) & 0x01; |
| } |
| return sprintf(buf, "%u\n", alarm); |
| } |
| |
| ssize_t |
| nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| struct nct6775_data *data = nct6775_update_device(dev); |
| int nr; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| nr = data->BEEP_BITS[sattr->index]; |
| |
| return sprintf(buf, "%u\n", |
| (unsigned int)((data->beeps >> nr) & 0x01)); |
| } |
| EXPORT_SYMBOL_GPL(nct6775_show_beep); |
| |
| ssize_t |
| nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int nr = data->BEEP_BITS[sattr->index]; |
| int regindex = nr >> 3; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| if (val > 1) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| if (val) |
| data->beeps |= (1ULL << nr); |
| else |
| data->beeps &= ~(1ULL << nr); |
| err = nct6775_write_value(data, data->REG_BEEP[regindex], |
| (data->beeps >> (regindex << 3)) & 0xff); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| EXPORT_SYMBOL_GPL(nct6775_store_beep); |
| |
| static ssize_t |
| show_temp_beep(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| struct nct6775_data *data = nct6775_update_device(dev); |
| unsigned int beep = 0; |
| int nr; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| /* |
| * For temperatures, there is no fixed mapping from registers to beep |
| * enable bits. Beep enable bits are determined by the temperature |
| * source mapping. |
| */ |
| nr = find_temp_source(data, sattr->index, data->num_temp_beeps); |
| if (nr >= 0) { |
| int bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE]; |
| |
| beep = (data->beeps >> bit) & 0x01; |
| } |
| return sprintf(buf, "%u\n", beep); |
| } |
| |
| static ssize_t |
| store_temp_beep(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int nr, bit, regindex; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| if (val > 1) |
| return -EINVAL; |
| |
| nr = find_temp_source(data, sattr->index, data->num_temp_beeps); |
| if (nr < 0) |
| return nr; |
| |
| bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE]; |
| regindex = bit >> 3; |
| |
| mutex_lock(&data->update_lock); |
| if (val) |
| data->beeps |= (1ULL << bit); |
| else |
| data->beeps &= ~(1ULL << bit); |
| err = nct6775_write_value(data, data->REG_BEEP[regindex], |
| (data->beeps >> (regindex << 3)) & 0xff); |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static umode_t nct6775_in_is_visible(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int in = index / 5; /* voltage index */ |
| int nr = index % 5; /* attribute index */ |
| |
| if (nr == 1 && data->ALARM_BITS[in] == -1) |
| return 0; |
| |
| if (!(data->have_in & BIT(in))) |
| return 0; |
| |
| return nct6775_attr_mode(data, attr); |
| } |
| |
| SENSOR_TEMPLATE_2(in_input, "in%d_input", 0444, show_in_reg, NULL, 0, 0); |
| SENSOR_TEMPLATE(in_alarm, "in%d_alarm", 0444, nct6775_show_alarm, NULL, 0); |
| SENSOR_TEMPLATE(in_beep, "in%d_beep", 0644, nct6775_show_beep, nct6775_store_beep, 0); |
| SENSOR_TEMPLATE_2(in_min, "in%d_min", 0644, show_in_reg, store_in_reg, 0, 1); |
| SENSOR_TEMPLATE_2(in_max, "in%d_max", 0644, show_in_reg, store_in_reg, 0, 2); |
| |
| /* |
| * nct6775_in_is_visible uses the index into the following array |
| * to determine if attributes should be created or not. |
| * Any change in order or content must be matched. |
| */ |
| static struct sensor_device_template *nct6775_attributes_in_template[] = { |
| &sensor_dev_template_in_input, |
| &sensor_dev_template_in_alarm, |
| &sensor_dev_template_in_beep, |
| &sensor_dev_template_in_min, |
| &sensor_dev_template_in_max, |
| NULL |
| }; |
| |
| static const struct sensor_template_group nct6775_in_template_group = { |
| .templates = nct6775_attributes_in_template, |
| .is_visible = nct6775_in_is_visible, |
| }; |
| |
| static ssize_t |
| show_fan(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->rpm[nr]); |
| } |
| |
| static ssize_t |
| show_fan_min(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", |
| data->fan_from_reg_min(data->fan_min[nr], |
| data->fan_div[nr])); |
| } |
| |
| static ssize_t |
| show_fan_div(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr])); |
| } |
| |
| static ssize_t |
| store_fan_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| unsigned int reg; |
| u8 new_div; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| if (!data->has_fan_div) { |
| /* NCT6776F or NCT6779D; we know this is a 13 bit register */ |
| if (!val) { |
| val = 0xff1f; |
| } else { |
| if (val > 1350000U) |
| val = 135000U; |
| val = 1350000U / val; |
| val = (val & 0x1f) | ((val << 3) & 0xff00); |
| } |
| data->fan_min[nr] = val; |
| goto write_min; /* Leave fan divider alone */ |
| } |
| if (!val) { |
| /* No min limit, alarm disabled */ |
| data->fan_min[nr] = 255; |
| new_div = data->fan_div[nr]; /* No change */ |
| dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1); |
| goto write_div; |
| } |
| reg = 1350000U / val; |
| if (reg >= 128 * 255) { |
| /* |
| * Speed below this value cannot possibly be represented, |
| * even with the highest divider (128) |
| */ |
| data->fan_min[nr] = 254; |
| new_div = 7; /* 128 == BIT(7) */ |
| dev_warn(dev, |
| "fan%u low limit %lu below minimum %u, set to minimum\n", |
| nr + 1, val, data->fan_from_reg_min(254, 7)); |
| } else if (!reg) { |
| /* |
| * Speed above this value cannot possibly be represented, |
| * even with the lowest divider (1) |
| */ |
| data->fan_min[nr] = 1; |
| new_div = 0; /* 1 == BIT(0) */ |
| dev_warn(dev, |
| "fan%u low limit %lu above maximum %u, set to maximum\n", |
| nr + 1, val, data->fan_from_reg_min(1, 0)); |
| } else { |
| /* |
| * Automatically pick the best divider, i.e. the one such |
| * that the min limit will correspond to a register value |
| * in the 96..192 range |
| */ |
| new_div = 0; |
| while (reg > 192 && new_div < 7) { |
| reg >>= 1; |
| new_div++; |
| } |
| data->fan_min[nr] = reg; |
| } |
| |
| write_div: |
| /* |
| * Write both the fan clock divider (if it changed) and the new |
| * fan min (unconditionally) |
| */ |
| if (new_div != data->fan_div[nr]) { |
| dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", |
| nr + 1, div_from_reg(data->fan_div[nr]), |
| div_from_reg(new_div)); |
| data->fan_div[nr] = new_div; |
| err = nct6775_write_fan_div_common(data, nr); |
| if (err) |
| goto write_min; |
| /* Give the chip time to sample a new speed value */ |
| data->last_updated = jiffies; |
| } |
| |
| write_min: |
| err = nct6775_write_value(data, data->REG_FAN_MIN[nr], data->fan_min[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_fan_pulses(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int p; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| p = data->fan_pulses[sattr->index]; |
| return sprintf(buf, "%d\n", p ? : 4); |
| } |
| |
| static ssize_t |
| store_fan_pulses(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| u16 reg; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| if (val > 4) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| data->fan_pulses[nr] = val & 3; |
| err = nct6775_read_value(data, data->REG_FAN_PULSES[nr], ®); |
| if (err) |
| goto out; |
| reg &= ~(0x03 << data->FAN_PULSE_SHIFT[nr]); |
| reg |= (val & 3) << data->FAN_PULSE_SHIFT[nr]; |
| err = nct6775_write_value(data, data->REG_FAN_PULSES[nr], reg); |
| out: |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static umode_t nct6775_fan_is_visible(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int fan = index / 6; /* fan index */ |
| int nr = index % 6; /* attribute index */ |
| |
| if (!(data->has_fan & BIT(fan))) |
| return 0; |
| |
| if (nr == 1 && data->ALARM_BITS[FAN_ALARM_BASE + fan] == -1) |
| return 0; |
| if (nr == 2 && data->BEEP_BITS[FAN_ALARM_BASE + fan] == -1) |
| return 0; |
| if (nr == 3 && !data->REG_FAN_PULSES[fan]) |
| return 0; |
| if (nr == 4 && !(data->has_fan_min & BIT(fan))) |
| return 0; |
| if (nr == 5 && data->kind != nct6775) |
| return 0; |
| |
| return nct6775_attr_mode(data, attr); |
| } |
| |
| SENSOR_TEMPLATE(fan_input, "fan%d_input", 0444, show_fan, NULL, 0); |
| SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", 0444, nct6775_show_alarm, NULL, FAN_ALARM_BASE); |
| SENSOR_TEMPLATE(fan_beep, "fan%d_beep", 0644, nct6775_show_beep, |
| nct6775_store_beep, FAN_ALARM_BASE); |
| SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", 0644, show_fan_pulses, store_fan_pulses, 0); |
| SENSOR_TEMPLATE(fan_min, "fan%d_min", 0644, show_fan_min, store_fan_min, 0); |
| SENSOR_TEMPLATE(fan_div, "fan%d_div", 0444, show_fan_div, NULL, 0); |
| |
| /* |
| * nct6775_fan_is_visible uses the index into the following array |
| * to determine if attributes should be created or not. |
| * Any change in order or content must be matched. |
| */ |
| static struct sensor_device_template *nct6775_attributes_fan_template[] = { |
| &sensor_dev_template_fan_input, |
| &sensor_dev_template_fan_alarm, /* 1 */ |
| &sensor_dev_template_fan_beep, /* 2 */ |
| &sensor_dev_template_fan_pulses, |
| &sensor_dev_template_fan_min, /* 4 */ |
| &sensor_dev_template_fan_div, /* 5 */ |
| NULL |
| }; |
| |
| static const struct sensor_template_group nct6775_fan_template_group = { |
| .templates = nct6775_attributes_fan_template, |
| .is_visible = nct6775_fan_is_visible, |
| .base = 1, |
| }; |
| |
| static ssize_t |
| show_temp_label(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]); |
| } |
| |
| static ssize_t |
| show_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->temp[index][nr])); |
| } |
| |
| static ssize_t |
| store_temp(struct device *dev, struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| int err; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp[index][nr] = LM75_TEMP_TO_REG(val); |
| err = nct6775_write_temp(data, data->reg_temp[index][nr], data->temp[index][nr]); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_temp_offset(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->temp_offset[sattr->index] * 1000); |
| } |
| |
| static ssize_t |
| store_temp_offset(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_offset[nr] = val; |
| err = nct6775_write_value(data, data->REG_TEMP_OFFSET[nr], val); |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", (int)data->temp_type[nr]); |
| } |
| |
| static ssize_t |
| store_temp_type(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| u8 vbit, dbit; |
| u16 vbat, diode; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| if (val != 1 && val != 3 && val != 4) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| |
| data->temp_type[nr] = val; |
| vbit = 0x02 << nr; |
| dbit = data->DIODE_MASK << nr; |
| |
| err = nct6775_read_value(data, data->REG_VBAT, &vbat); |
| if (err) |
| goto out; |
| vbat &= ~vbit; |
| |
| err = nct6775_read_value(data, data->REG_DIODE, &diode); |
| if (err) |
| goto out; |
| diode &= ~dbit; |
| |
| switch (val) { |
| case 1: /* CPU diode (diode, current mode) */ |
| vbat |= vbit; |
| diode |= dbit; |
| break; |
| case 3: /* diode, voltage mode */ |
| vbat |= dbit; |
| break; |
| case 4: /* thermistor */ |
| break; |
| } |
| err = nct6775_write_value(data, data->REG_VBAT, vbat); |
| if (err) |
| goto out; |
| err = nct6775_write_value(data, data->REG_DIODE, diode); |
| out: |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static umode_t nct6775_temp_is_visible(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int temp = index / 10; /* temp index */ |
| int nr = index % 10; /* attribute index */ |
| |
| if (!(data->have_temp & BIT(temp))) |
| return 0; |
| |
| if (nr == 1 && !data->temp_label) |
| return 0; |
| |
| if (nr == 2 && find_temp_source(data, temp, data->num_temp_alarms) < 0) |
| return 0; /* alarm */ |
| |
| if (nr == 3 && find_temp_source(data, temp, data->num_temp_beeps) < 0) |
| return 0; /* beep */ |
| |
| if (nr == 4 && !data->reg_temp[1][temp]) /* max */ |
| return 0; |
| |
| if (nr == 5 && !data->reg_temp[2][temp]) /* max_hyst */ |
| return 0; |
| |
| if (nr == 6 && !data->reg_temp[3][temp]) /* crit */ |
| return 0; |
| |
| if (nr == 7 && !data->reg_temp[4][temp]) /* lcrit */ |
| return 0; |
| |
| /* offset and type only apply to fixed sensors */ |
| if (nr > 7 && !(data->have_temp_fixed & BIT(temp))) |
| return 0; |
| |
| return nct6775_attr_mode(data, attr); |
| } |
| |
| SENSOR_TEMPLATE_2(temp_input, "temp%d_input", 0444, show_temp, NULL, 0, 0); |
| SENSOR_TEMPLATE(temp_label, "temp%d_label", 0444, show_temp_label, NULL, 0); |
| SENSOR_TEMPLATE_2(temp_max, "temp%d_max", 0644, show_temp, store_temp, 0, 1); |
| SENSOR_TEMPLATE_2(temp_max_hyst, "temp%d_max_hyst", 0644, show_temp, store_temp, 0, 2); |
| SENSOR_TEMPLATE_2(temp_crit, "temp%d_crit", 0644, show_temp, store_temp, 0, 3); |
| SENSOR_TEMPLATE_2(temp_lcrit, "temp%d_lcrit", 0644, show_temp, store_temp, 0, 4); |
| SENSOR_TEMPLATE(temp_offset, "temp%d_offset", 0644, show_temp_offset, store_temp_offset, 0); |
| SENSOR_TEMPLATE(temp_type, "temp%d_type", 0644, show_temp_type, store_temp_type, 0); |
| SENSOR_TEMPLATE(temp_alarm, "temp%d_alarm", 0444, show_temp_alarm, NULL, 0); |
| SENSOR_TEMPLATE(temp_beep, "temp%d_beep", 0644, show_temp_beep, store_temp_beep, 0); |
| |
| /* |
| * nct6775_temp_is_visible uses the index into the following array |
| * to determine if attributes should be created or not. |
| * Any change in order or content must be matched. |
| */ |
| static struct sensor_device_template *nct6775_attributes_temp_template[] = { |
| &sensor_dev_template_temp_input, |
| &sensor_dev_template_temp_label, |
| &sensor_dev_template_temp_alarm, /* 2 */ |
| &sensor_dev_template_temp_beep, /* 3 */ |
| &sensor_dev_template_temp_max, /* 4 */ |
| &sensor_dev_template_temp_max_hyst, /* 5 */ |
| &sensor_dev_template_temp_crit, /* 6 */ |
| &sensor_dev_template_temp_lcrit, /* 7 */ |
| &sensor_dev_template_temp_offset, /* 8 */ |
| &sensor_dev_template_temp_type, /* 9 */ |
| NULL |
| }; |
| |
| static const struct sensor_template_group nct6775_temp_template_group = { |
| .templates = nct6775_attributes_temp_template, |
| .is_visible = nct6775_temp_is_visible, |
| .base = 1, |
| }; |
| |
| static ssize_t show_tsi_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sysfs_emit(buf, "%u\n", tsi_temp_from_reg(data->tsi_temp[sattr->index])); |
| } |
| |
| static ssize_t show_tsi_temp_label(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| return sysfs_emit(buf, "TSI%d_TEMP\n", sattr->index); |
| } |
| |
| SENSOR_TEMPLATE(tsi_temp_input, "temp%d_input", 0444, show_tsi_temp, NULL, 0); |
| SENSOR_TEMPLATE(tsi_temp_label, "temp%d_label", 0444, show_tsi_temp_label, NULL, 0); |
| |
| static umode_t nct6775_tsi_temp_is_visible(struct kobject *kobj, struct attribute *attr, |
| int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int temp = index / 2; |
| |
| return (data->have_tsi_temp & BIT(temp)) ? nct6775_attr_mode(data, attr) : 0; |
| } |
| |
| /* |
| * The index calculation in nct6775_tsi_temp_is_visible() must be kept in |
| * sync with the size of this array. |
| */ |
| static struct sensor_device_template *nct6775_tsi_temp_template[] = { |
| &sensor_dev_template_tsi_temp_input, |
| &sensor_dev_template_tsi_temp_label, |
| NULL |
| }; |
| |
| static ssize_t |
| show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->pwm_mode[sattr->index]); |
| } |
| |
| static ssize_t |
| store_pwm_mode(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| u16 reg; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| if (val > 1) |
| return -EINVAL; |
| |
| /* Setting DC mode (0) is not supported for all chips/channels */ |
| if (data->REG_PWM_MODE[nr] == 0) { |
| if (!val) |
| return -EINVAL; |
| return count; |
| } |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_mode[nr] = val; |
| err = nct6775_read_value(data, data->REG_PWM_MODE[nr], ®); |
| if (err) |
| goto out; |
| reg &= ~data->PWM_MODE_MASK[nr]; |
| if (!val) |
| reg |= data->PWM_MODE_MASK[nr]; |
| err = nct6775_write_value(data, data->REG_PWM_MODE[nr], reg); |
| out: |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_pwm(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| int err; |
| u16 pwm; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| /* |
| * For automatic fan control modes, show current pwm readings. |
| * Otherwise, show the configured value. |
| */ |
| if (index == 0 && data->pwm_enable[nr] > manual) { |
| err = nct6775_read_value(data, data->REG_PWM_READ[nr], &pwm); |
| if (err) |
| return err; |
| } else { |
| pwm = data->pwm[index][nr]; |
| } |
| |
| return sprintf(buf, "%d\n", pwm); |
| } |
| |
| static ssize_t |
| store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| unsigned long val; |
| int minval[7] = { 0, 1, 1, data->pwm[2][nr], 0, 0, 0 }; |
| int maxval[7] |
| = { 255, 255, data->pwm[3][nr] ? : 255, 255, 255, 255, 255 }; |
| int err; |
| u16 reg; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| val = clamp_val(val, minval[index], maxval[index]); |
| |
| mutex_lock(&data->update_lock); |
| data->pwm[index][nr] = val; |
| err = nct6775_write_value(data, data->REG_PWM[index][nr], val); |
| if (err) |
| goto out; |
| if (index == 2) { /* floor: disable if val == 0 */ |
| err = nct6775_read_value(data, data->REG_TEMP_SEL[nr], ®); |
| if (err) |
| goto out; |
| reg &= 0x7f; |
| if (val) |
| reg |= 0x80; |
| err = nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg); |
| } |
| out: |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| /* Returns 0 if OK, -EINVAL otherwise */ |
| static int check_trip_points(struct nct6775_data *data, int nr) |
| { |
| int i; |
| |
| for (i = 0; i < data->auto_pwm_num - 1; i++) { |
| if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1]) |
| return -EINVAL; |
| } |
| for (i = 0; i < data->auto_pwm_num - 1; i++) { |
| if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1]) |
| return -EINVAL; |
| } |
| /* validate critical temperature and pwm if enabled (pwm > 0) */ |
| if (data->auto_pwm[nr][data->auto_pwm_num]) { |
| if (data->auto_temp[nr][data->auto_pwm_num - 1] > |
| data->auto_temp[nr][data->auto_pwm_num] || |
| data->auto_pwm[nr][data->auto_pwm_num - 1] > |
| data->auto_pwm[nr][data->auto_pwm_num]) |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int pwm_update_registers(struct nct6775_data *data, int nr) |
| { |
| u16 reg; |
| int err; |
| |
| switch (data->pwm_enable[nr]) { |
| case off: |
| case manual: |
| break; |
| case speed_cruise: |
| err = nct6775_read_value(data, data->REG_FAN_MODE[nr], ®); |
| if (err) |
| return err; |
| reg = (reg & ~data->tolerance_mask) | |
| (data->target_speed_tolerance[nr] & data->tolerance_mask); |
| err = nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); |
| if (err) |
| return err; |
| err = nct6775_write_value(data, data->REG_TARGET[nr], |
| data->target_speed[nr] & 0xff); |
| if (err) |
| return err; |
| if (data->REG_TOLERANCE_H) { |
| reg = (data->target_speed[nr] >> 8) & 0x0f; |
| reg |= (data->target_speed_tolerance[nr] & 0x38) << 1; |
| err = nct6775_write_value(data, data->REG_TOLERANCE_H[nr], reg); |
| if (err) |
| return err; |
| } |
| break; |
| case thermal_cruise: |
| err = nct6775_write_value(data, data->REG_TARGET[nr], data->target_temp[nr]); |
| if (err) |
| return err; |
| fallthrough; |
| default: |
| err = nct6775_read_value(data, data->REG_FAN_MODE[nr], ®); |
| if (err) |
| return err; |
| reg = (reg & ~data->tolerance_mask) | |
| data->temp_tolerance[0][nr]; |
| err = nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); |
| if (err) |
| return err; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t |
| show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->pwm_enable[sattr->index]); |
| } |
| |
| static ssize_t |
| store_pwm_enable(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| u16 reg; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| if (val > sf4) |
| return -EINVAL; |
| |
| if (val == sf3 && data->kind != nct6775) |
| return -EINVAL; |
| |
| if (val == sf4 && check_trip_points(data, nr)) { |
| dev_err(dev, "Inconsistent trip points, not switching to SmartFan IV mode\n"); |
| dev_err(dev, "Adjust trip points and try again\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_enable[nr] = val; |
| if (val == off) { |
| /* |
| * turn off pwm control: select manual mode, set pwm to maximum |
| */ |
| data->pwm[0][nr] = 255; |
| err = nct6775_write_value(data, data->REG_PWM[0][nr], 255); |
| if (err) |
| goto out; |
| } |
| err = pwm_update_registers(data, nr); |
| if (err) |
| goto out; |
| err = nct6775_read_value(data, data->REG_FAN_MODE[nr], ®); |
| if (err) |
| goto out; |
| reg &= 0x0f; |
| reg |= pwm_enable_to_reg(val) << 4; |
| err = nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); |
| out: |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_pwm_temp_sel_common(struct nct6775_data *data, char *buf, int src) |
| { |
| int i, sel = 0; |
| |
| for (i = 0; i < NUM_TEMP; i++) { |
| if (!(data->have_temp & BIT(i))) |
| continue; |
| if (src == data->temp_src[i]) { |
| sel = i + 1; |
| break; |
| } |
| } |
| |
| return sprintf(buf, "%d\n", sel); |
| } |
| |
| static ssize_t |
| show_pwm_temp_sel(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return show_pwm_temp_sel_common(data, buf, data->pwm_temp_sel[index]); |
| } |
| |
| static ssize_t |
| store_pwm_temp_sel(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err, src; |
| u16 reg; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| if (val == 0 || val > NUM_TEMP) |
| return -EINVAL; |
| if (!(data->have_temp & BIT(val - 1)) || !data->temp_src[val - 1]) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| src = data->temp_src[val - 1]; |
| data->pwm_temp_sel[nr] = src; |
| err = nct6775_read_value(data, data->REG_TEMP_SEL[nr], ®); |
| if (err) |
| goto out; |
| reg &= 0xe0; |
| reg |= src; |
| err = nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg); |
| out: |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return show_pwm_temp_sel_common(data, buf, |
| data->pwm_weight_temp_sel[index]); |
| } |
| |
| static ssize_t |
| store_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err, src; |
| u16 reg; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| if (val > NUM_TEMP) |
| return -EINVAL; |
| val = array_index_nospec(val, NUM_TEMP + 1); |
| if (val && (!(data->have_temp & BIT(val - 1)) || |
| !data->temp_src[val - 1])) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| if (val) { |
| src = data->temp_src[val - 1]; |
| data->pwm_weight_temp_sel[nr] = src; |
| err = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[nr], ®); |
| if (err) |
| goto out; |
| reg &= 0xe0; |
| reg |= (src | 0x80); |
| err = nct6775_write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); |
| } else { |
| data->pwm_weight_temp_sel[nr] = 0; |
| err = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[nr], ®); |
| if (err) |
| goto out; |
| reg &= 0x7f; |
| err = nct6775_write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); |
| } |
| out: |
| mutex_unlock(&data->update_lock); |
| |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_target_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->target_temp[sattr->index] * 1000); |
| } |
| |
| static ssize_t |
| store_target_temp(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, |
| data->target_temp_mask); |
| |
| mutex_lock(&data->update_lock); |
| data->target_temp[nr] = val; |
| err = pwm_update_registers(data, nr); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_target_speed(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", |
| fan_from_reg16(data->target_speed[nr], |
| data->fan_div[nr])); |
| } |
| |
| static ssize_t |
| store_target_speed(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| u16 speed; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = clamp_val(val, 0, 1350000U); |
| speed = fan_to_reg(val, data->fan_div[nr]); |
| |
| mutex_lock(&data->update_lock); |
| data->target_speed[nr] = speed; |
| err = pwm_update_registers(data, nr); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_temp_tolerance(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->temp_tolerance[index][nr] * 1000); |
| } |
| |
| static ssize_t |
| store_temp_tolerance(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| /* Limit tolerance as needed */ |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, data->tolerance_mask); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_tolerance[index][nr] = val; |
| if (index) |
| err = pwm_update_registers(data, nr); |
| else |
| err = nct6775_write_value(data, data->REG_CRITICAL_TEMP_TOLERANCE[nr], val); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| /* |
| * Fan speed tolerance is a tricky beast, since the associated register is |
| * a tick counter, but the value is reported and configured as rpm. |
| * Compute resulting low and high rpm values and report the difference. |
| * A fan speed tolerance only makes sense if a fan target speed has been |
| * configured, so only display values other than 0 if that is the case. |
| */ |
| static ssize_t |
| show_speed_tolerance(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| int target, tolerance = 0; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| target = data->target_speed[nr]; |
| |
| if (target) { |
| int low = target - data->target_speed_tolerance[nr]; |
| int high = target + data->target_speed_tolerance[nr]; |
| |
| if (low <= 0) |
| low = 1; |
| if (high > 0xffff) |
| high = 0xffff; |
| if (high < low) |
| high = low; |
| |
| tolerance = (fan_from_reg16(low, data->fan_div[nr]) |
| - fan_from_reg16(high, data->fan_div[nr])) / 2; |
| } |
| |
| return sprintf(buf, "%d\n", tolerance); |
| } |
| |
| static ssize_t |
| store_speed_tolerance(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); |
| int nr = sattr->index; |
| unsigned long val; |
| int err; |
| int low, high; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| high = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) + val; |
| low = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) - val; |
| if (low <= 0) |
| low = 1; |
| if (high < low) |
| high = low; |
| |
| val = (fan_to_reg(low, data->fan_div[nr]) - |
| fan_to_reg(high, data->fan_div[nr])) / 2; |
| |
| /* Limit tolerance as needed */ |
| val = clamp_val(val, 0, data->speed_tolerance_limit); |
| |
| mutex_lock(&data->update_lock); |
| data->target_speed_tolerance[nr] = val; |
| err = pwm_update_registers(data, nr); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| SENSOR_TEMPLATE_2(pwm, "pwm%d", 0644, show_pwm, store_pwm, 0, 0); |
| SENSOR_TEMPLATE(pwm_mode, "pwm%d_mode", 0644, show_pwm_mode, store_pwm_mode, 0); |
| SENSOR_TEMPLATE(pwm_enable, "pwm%d_enable", 0644, show_pwm_enable, store_pwm_enable, 0); |
| SENSOR_TEMPLATE(pwm_temp_sel, "pwm%d_temp_sel", 0644, show_pwm_temp_sel, store_pwm_temp_sel, 0); |
| SENSOR_TEMPLATE(pwm_target_temp, "pwm%d_target_temp", 0644, show_target_temp, store_target_temp, 0); |
| SENSOR_TEMPLATE(fan_target, "fan%d_target", 0644, show_target_speed, store_target_speed, 0); |
| SENSOR_TEMPLATE(fan_tolerance, "fan%d_tolerance", 0644, show_speed_tolerance, |
| store_speed_tolerance, 0); |
| |
| /* Smart Fan registers */ |
| |
| static ssize_t |
| show_weight_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->weight_temp[index][nr] * 1000); |
| } |
| |
| static ssize_t |
| store_weight_temp(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| data->weight_temp[index][nr] = val; |
| err = nct6775_write_value(data, data->REG_WEIGHT_TEMP[index][nr], val); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| SENSOR_TEMPLATE(pwm_weight_temp_sel, "pwm%d_weight_temp_sel", 0644, |
| show_pwm_weight_temp_sel, store_pwm_weight_temp_sel, 0); |
| SENSOR_TEMPLATE_2(pwm_weight_temp_step, "pwm%d_weight_temp_step", |
| 0644, show_weight_temp, store_weight_temp, 0, 0); |
| SENSOR_TEMPLATE_2(pwm_weight_temp_step_tol, "pwm%d_weight_temp_step_tol", |
| 0644, show_weight_temp, store_weight_temp, 0, 1); |
| SENSOR_TEMPLATE_2(pwm_weight_temp_step_base, "pwm%d_weight_temp_step_base", |
| 0644, show_weight_temp, store_weight_temp, 0, 2); |
| SENSOR_TEMPLATE_2(pwm_weight_duty_step, "pwm%d_weight_duty_step", 0644, show_pwm, store_pwm, 0, 5); |
| SENSOR_TEMPLATE_2(pwm_weight_duty_base, "pwm%d_weight_duty_base", 0644, show_pwm, store_pwm, 0, 6); |
| |
| static ssize_t |
| show_fan_time(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", |
| step_time_from_reg(data->fan_time[index][nr], |
| data->pwm_mode[nr])); |
| } |
| |
| static ssize_t |
| store_fan_time(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int index = sattr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = step_time_to_reg(val, data->pwm_mode[nr]); |
| mutex_lock(&data->update_lock); |
| data->fan_time[index][nr] = val; |
| err = nct6775_write_value(data, data->REG_FAN_TIME[index][nr], val); |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_auto_pwm(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->auto_pwm[sattr->nr][sattr->index]); |
| } |
| |
| static ssize_t |
| store_auto_pwm(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int point = sattr->index; |
| unsigned long val; |
| int err; |
| u16 reg; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| if (val > 255) |
| return -EINVAL; |
| |
| if (point == data->auto_pwm_num) { |
| if (data->kind != nct6775 && !val) |
| return -EINVAL; |
| if (data->kind != nct6779 && val) |
| val = 0xff; |
| } |
| |
| mutex_lock(&data->update_lock); |
| data->auto_pwm[nr][point] = val; |
| if (point < data->auto_pwm_num) { |
| err = nct6775_write_value(data, NCT6775_AUTO_PWM(data, nr, point), |
| data->auto_pwm[nr][point]); |
| } else { |
| switch (data->kind) { |
| case nct6775: |
| /* disable if needed (pwm == 0) */ |
| err = nct6775_read_value(data, NCT6775_REG_CRITICAL_ENAB[nr], ®); |
| if (err) |
| break; |
| if (val) |
| reg |= 0x02; |
| else |
| reg &= ~0x02; |
| err = nct6775_write_value(data, NCT6775_REG_CRITICAL_ENAB[nr], reg); |
| break; |
| case nct6776: |
| break; /* always enabled, nothing to do */ |
| case nct6106: |
| case nct6116: |
| case nct6779: |
| case nct6791: |
| case nct6792: |
| case nct6793: |
| case nct6795: |
| case nct6796: |
| case nct6797: |
| case nct6798: |
| case nct6799: |
| err = nct6775_write_value(data, data->REG_CRITICAL_PWM[nr], val); |
| if (err) |
| break; |
| err = nct6775_read_value(data, data->REG_CRITICAL_PWM_ENABLE[nr], ®); |
| if (err) |
| break; |
| if (val == 255) |
| reg &= ~data->CRITICAL_PWM_ENABLE_MASK; |
| else |
| reg |= data->CRITICAL_PWM_ENABLE_MASK; |
| err = nct6775_write_value(data, data->REG_CRITICAL_PWM_ENABLE[nr], reg); |
| break; |
| } |
| } |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static ssize_t |
| show_auto_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct nct6775_data *data = nct6775_update_device(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int point = sattr->index; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| /* |
| * We don't know for sure if the temperature is signed or unsigned. |
| * Assume it is unsigned. |
| */ |
| return sprintf(buf, "%d\n", data->auto_temp[nr][point] * 1000); |
| } |
| |
| static ssize_t |
| store_auto_temp(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); |
| int nr = sattr->nr; |
| int point = sattr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| if (val > 255000) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| data->auto_temp[nr][point] = DIV_ROUND_CLOSEST(val, 1000); |
| if (point < data->auto_pwm_num) { |
| err = nct6775_write_value(data, NCT6775_AUTO_TEMP(data, nr, point), |
| data->auto_temp[nr][point]); |
| } else { |
| err = nct6775_write_value(data, data->REG_CRITICAL_TEMP[nr], |
| data->auto_temp[nr][point]); |
| } |
| mutex_unlock(&data->update_lock); |
| return err ? : count; |
| } |
| |
| static umode_t nct6775_pwm_is_visible(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct nct6775_data *data = dev_get_drvdata(dev); |
| int pwm = index / 36; /* pwm index */ |
| int nr = index % 36; /* attribute index */ |
| |
| if (!(data->has_pwm & BIT(pwm))) |
| return 0; |
| |
| if ((nr >= 14 && nr <= 18) || nr == 21) /* weight */ |
| if (!data->REG_WEIGHT_TEMP_SEL[pwm]) |
| return 0; |
| if (nr == 19 && data->REG_PWM[3] == NULL) /* pwm_max */ |
| return 0; |
| if (nr == 20 && data->REG_PWM[4] == NULL) /* pwm_step */ |
| return 0; |
| if (nr == 21 && data->REG_PWM[6] == NULL) /* weight_duty_base */ |
| return 0; |
| |
| if (nr >= 22 && nr <= 35) { /* auto point */ |
| int api = (nr - 22) / 2; /* auto point index */ |
| |
| if (api > data->auto_pwm_num) |
| return 0; |
| } |
| return nct6775_attr_mode(data, attr); |
| } |
| |
| SENSOR_TEMPLATE_2(pwm_stop_time, "pwm%d_stop_time", 0644, show_fan_time, store_fan_time, 0, 0); |
| SENSOR_TEMPLATE_2(pwm_step_up_time, "pwm%d_step_up_time", 0644, |
| show_fan_time, store_fan_time, 0, 1); |
| SENSOR_TEMPLATE_2(pwm_step_down_time, "pwm%d_step_down_time", 0644, |
| show_fan_time, store_fan_time, 0, 2); |
| SENSOR_TEMPLATE_2(pwm_start, "pwm%d_start", 0644, show_pwm, store_pwm, 0, 1); |
| SENSOR_TEMPLATE_2(pwm_floor, "pwm%d_floor", 0644, show_pwm, store_pwm, 0, 2); |
| SENSOR_TEMPLATE_2(pwm_temp_tolerance, "pwm%d_temp_tolerance", 0644, |
| show_temp_tolerance, store_temp_tolerance, 0, 0); |
| SENSOR_TEMPLATE_2(pwm_crit_temp_tolerance, "pwm%d_crit_temp_tolerance", |
| 0644, show_temp_tolerance, store_temp_tolerance, 0, 1); |
| |
| SENSOR_TEMPLATE_2(pwm_max, "pwm%d_max", 0644, show_pwm, store_pwm, 0, 3); |
| |
| SENSOR_TEMPLATE_2(pwm_step, "pwm%d_step", 0644, show_pwm, store_pwm, 0, 4); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point1_pwm, "pwm%d_auto_point1_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 0); |
| SENSOR_TEMPLATE_2(pwm_auto_point1_temp, "pwm%d_auto_point1_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 0); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point2_pwm, "pwm%d_auto_point2_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 1); |
| SENSOR_TEMPLATE_2(pwm_auto_point2_temp, "pwm%d_auto_point2_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 1); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point3_pwm, "pwm%d_auto_point3_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 2); |
| SENSOR_TEMPLATE_2(pwm_auto_point3_temp, "pwm%d_auto_point3_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 2); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point4_pwm, "pwm%d_auto_point4_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 3); |
| SENSOR_TEMPLATE_2(pwm_auto_point4_temp, "pwm%d_auto_point4_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 3); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point5_pwm, "pwm%d_auto_point5_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 4); |
| SENSOR_TEMPLATE_2(pwm_auto_point5_temp, "pwm%d_auto_point5_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 4); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point6_pwm, "pwm%d_auto_point6_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 5); |
| SENSOR_TEMPLATE_2(pwm_auto_point6_temp, "pwm%d_auto_point6_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 5); |
| |
| SENSOR_TEMPLATE_2(pwm_auto_point7_pwm, "pwm%d_auto_point7_pwm", |
| 0644, show_auto_pwm, store_auto_pwm, 0, 6); |
| SENSOR_TEMPLATE_2(pwm_auto_point7_temp, "pwm%d_auto_point7_temp", |
| 0644, show_auto_temp, store_auto_temp, 0, 6); |
| |
| /* |
| * nct6775_pwm_is_visible uses the index into the following array |
| * to determine if attributes should be created or not. |
| * Any change in order or content must be matched. |
| */ |
| static struct sensor_device_template *nct6775_attributes_pwm_template[] = { |
| &sensor_dev_template_pwm, |
| &sensor_dev_template_pwm_mode, |
| &sensor_dev_template_pwm_enable, |
| &sensor_dev_template_pwm_temp_sel, |
| &sensor_dev_template_pwm_temp_tolerance, |
| &sensor_dev_template_pwm_crit_temp_tolerance, |
| &sensor_dev_template_pwm_target_temp, |
| &sensor_dev_template_fan_target, |
| &sensor_dev_template_fan_tolerance, |
| &sensor_dev_template_pwm_stop_time, |
| &sensor_dev_template_pwm_step_up_time, |
| &sensor_dev_template_pwm_step_down_time, |
| &sensor_dev_template_pwm_start, |
| &sensor_dev_template_pwm_floor, |
| &sensor_dev_template_pwm_weight_temp_sel, /* 14 */ |
| &sensor_dev_template_pwm_weight_temp_step, |
| &sensor_dev_template_pwm_weight_temp_step_tol, |
| &sensor_dev_template_pwm_weight_temp_step_base, |
| &sensor_dev_template_pwm_weight_duty_step, /* 18 */ |
| &sensor_dev_template_pwm_max, /* 19 */ |
| &sensor_dev_template_pwm_step, /* 20 */ |
| &sensor_dev_template_pwm_weight_duty_base, /* 21 */ |
| &sensor_dev_template_pwm_auto_point1_pwm, /* 22 */ |
| &sensor_dev_template_pwm_auto_point1_temp, |
| &sensor_dev_template_pwm_auto_point2_pwm, |
| &sensor_dev_template_pwm_auto_point2_temp, |
| &sensor_dev_template_pwm_auto_point3_pwm, |
| &sensor_dev_template_pwm_auto_point3_temp, |
| &sensor_dev_template_pwm_auto_point4_pwm, |
| &sensor_dev_template_pwm_auto_point4_temp, |
| &sensor_dev_template_pwm_auto_point5_pwm, |
| &sensor_dev_template_pwm_auto_point5_temp, |
| &sensor_dev_template_pwm_auto_point6_pwm, |
| &sensor_dev_template_pwm_auto_point6_temp, |
| &sensor_dev_template_pwm_auto_point7_pwm, |
| &sensor_dev_template_pwm_auto_point7_temp, /* 35 */ |
| |
| NULL |
| }; |
| |
| static const struct sensor_template_group nct6775_pwm_template_group = { |
| .templates = nct6775_attributes_pwm_template, |
| .is_visible = nct6775_pwm_is_visible, |
| .base = 1, |
| }; |
| |
| static inline int nct6775_init_device(struct nct6775_data *data) |
| { |
| int i, err; |
| u16 tmp, diode; |
| |
| /* Start monitoring if needed */ |
| if (data->REG_CONFIG) { |
| err = nct6775_read_value(data, data->REG_CONFIG, &tmp); |
| if (err) |
| return err; |
| if (!(tmp & 0x01)) { |
| err = nct6775_write_value(data, data->REG_CONFIG, tmp | 0x01); |
| if (err) |
| return err; |
| } |
| } |
| |
| /* Enable temperature sensors if needed */ |
| for (i = 0; i < NUM_TEMP; i++) { |
| if (!(data->have_temp & BIT(i))) |
| continue; |
| if (!data->reg_temp_config[i]) |
| continue; |
| err = nct6775_read_value(data, data->reg_temp_config[i], &tmp); |
| if (err) |
| return err; |
| if (tmp & 0x01) { |
| err = nct6775_write_value(data, data->reg_temp_config[i], tmp & 0xfe); |
| if (err) |
| return err; |
| } |
| } |
| |
| /* Enable VBAT monitoring if needed */ |
| err = nct6775_read_value(data, data->REG_VBAT, &tmp); |
| if (err) |
| return err; |
| if (!(tmp & 0x01)) { |
| err = nct6775_write_value(data, data->REG_VBAT, tmp | 0x01); |
| if (err) |
| return err; |
| } |
| |
| err = nct6775_read_value(data, data->REG_DIODE, &diode); |
| if (err) |
| return err; |
| |
| for (i = 0; i < data->temp_fixed_num; i++) { |
| if (!(data->have_temp_fixed & BIT(i))) |
| continue; |
| if ((tmp & (data->DIODE_MASK << i))) /* diode */ |
| data->temp_type[i] |
| = 3 - ((diode >> i) & data->DIODE_MASK); |
| else /* thermistor */ |
| data->temp_type[i] = 4; |
| } |
| |
| return 0; |
| } |
| |
| static int add_temp_sensors(struct nct6775_data *data, const u16 *regp, |
| int *available, int *mask) |
| { |
| int i, err; |
| u16 src; |
| |
| for (i = 0; i < data->pwm_num && *available; i++) { |
| int index; |
| |
| if (!regp[i]) |
| continue; |
| err = nct6775_read_value(data, regp[i], &src); |
| if (err) |
| return err; |
| src &= 0x1f; |
| if (!src || (*mask & BIT(src))) |
| continue; |
| if (!(data->temp_mask & BIT(src))) |
| continue; |
| |
| index = __ffs(*available); |
| err = nct6775_write_value(data, data->REG_TEMP_SOURCE[index], src); |
| if (err) |
| return err; |
| *available &= ~BIT(index); |
| *mask |= BIT(src); |
| } |
| |
| return 0; |
| } |
| |
| int nct6775_probe(struct device *dev, struct nct6775_data *data, |
| const struct regmap_config *regmapcfg) |
| { |
| int i, s, err = 0; |
| int mask, available; |
| u16 src; |
| const u16 *reg_temp, *reg_temp_over, *reg_temp_hyst, *reg_temp_config; |
| const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit; |
| const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL; |
| int num_reg_temp, num_reg_temp_mon, num_reg_tsi_temp; |
| struct device *hwmon_dev; |
| struct sensor_template_group tsi_temp_tg; |
| |
| data->regmap = devm_regmap_init(dev, NULL, data, regmapcfg); |
| if (IS_ERR(data->regmap)) |
| return PTR_ERR(data->regmap); |
| |
| mutex_init(&data->update_lock); |
| data->name = nct6775_device_names[data->kind]; |
| data->bank = 0xff; /* Force initial bank selection */ |
| data->scale_in = scale_in; |
| |
| switch (data->kind) { |
| case nct6106: |
| data->in_num = 9; |
| data->pwm_num = 3; |
| data->auto_pwm_num = 4; |
| data->temp_fixed_num = 3; |
| data->num_temp_alarms = 6; |
| data->num_temp_beeps = 6; |
| |
| data->fan_from_reg = fan_from_reg13; |
| data->fan_from_reg_min = fan_from_reg13; |
| |
| data->temp_label = nct6776_temp_label; |
| data->temp_mask = NCT6776_TEMP_MASK; |
| data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; |
| |
| data->REG_VBAT = NCT6106_REG_VBAT; |
| data->REG_DIODE = NCT6106_REG_DIODE; |
| data->DIODE_MASK = NCT6106_DIODE_MASK; |
| data->REG_VIN = NCT6106_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX; |
| data->REG_TARGET = NCT6106_REG_TARGET; |
| data->REG_FAN = NCT6106_REG_FAN; |
| data->REG_FAN_MODE = NCT6106_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6106_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6106_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6106_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6116_REG_PWM; |
| data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6106_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6106_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6106_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6106_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6106_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6106_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_CRITICAL_PWM_ENABLE = NCT6106_REG_CRITICAL_PWM_ENABLE; |
| data->CRITICAL_PWM_ENABLE_MASK |
| = NCT6106_CRITICAL_PWM_ENABLE_MASK; |
| data->REG_CRITICAL_PWM = NCT6106_REG_CRITICAL_PWM; |
| data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6106_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6106_REG_ALARM; |
| data->ALARM_BITS = NCT6106_ALARM_BITS; |
| data->REG_BEEP = NCT6106_REG_BEEP; |
| data->BEEP_BITS = NCT6106_BEEP_BITS; |
| data->REG_TSI_TEMP = NCT6106_REG_TSI_TEMP; |
| |
| reg_temp = NCT6106_REG_TEMP; |
| reg_temp_mon = NCT6106_REG_TEMP_MON; |
| num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP); |
| num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON); |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6106_REG_TSI_TEMP); |
| reg_temp_over = NCT6106_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6106_REG_TEMP_HYST; |
| reg_temp_config = NCT6106_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6106_REG_TEMP_CRIT; |
| reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; |
| reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H; |
| |
| break; |
| case nct6116: |
| data->in_num = 9; |
| data->pwm_num = 3; |
| data->auto_pwm_num = 4; |
| data->temp_fixed_num = 3; |
| data->num_temp_alarms = 3; |
| data->num_temp_beeps = 3; |
| |
| data->fan_from_reg = fan_from_reg13; |
| data->fan_from_reg_min = fan_from_reg13; |
| |
| data->temp_label = nct6776_temp_label; |
| data->temp_mask = NCT6776_TEMP_MASK; |
| data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; |
| |
| data->REG_VBAT = NCT6106_REG_VBAT; |
| data->REG_DIODE = NCT6106_REG_DIODE; |
| data->DIODE_MASK = NCT6106_DIODE_MASK; |
| data->REG_VIN = NCT6106_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX; |
| data->REG_TARGET = NCT6116_REG_TARGET; |
| data->REG_FAN = NCT6116_REG_FAN; |
| data->REG_FAN_MODE = NCT6116_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6116_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6116_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6116_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6116_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6116_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6116_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6116_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6116_REG_PWM; |
| data->REG_PWM[1] = NCT6116_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6116_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6106_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6106_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6116_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6116_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6116_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6116_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_CRITICAL_PWM_ENABLE = NCT6116_REG_CRITICAL_PWM_ENABLE; |
| data->CRITICAL_PWM_ENABLE_MASK |
| = NCT6106_CRITICAL_PWM_ENABLE_MASK; |
| data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM; |
| data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6106_REG_ALARM; |
| data->ALARM_BITS = NCT6116_ALARM_BITS; |
| data->REG_BEEP = NCT6106_REG_BEEP; |
| data->BEEP_BITS = NCT6116_BEEP_BITS; |
| data->REG_TSI_TEMP = NCT6116_REG_TSI_TEMP; |
| |
| reg_temp = NCT6106_REG_TEMP; |
| reg_temp_mon = NCT6106_REG_TEMP_MON; |
| num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP); |
| num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON); |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6116_REG_TSI_TEMP); |
| reg_temp_over = NCT6106_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6106_REG_TEMP_HYST; |
| reg_temp_config = NCT6106_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6106_REG_TEMP_CRIT; |
| reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; |
| reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H; |
| |
| break; |
| case nct6775: |
| data->in_num = 9; |
| data->pwm_num = 3; |
| data->auto_pwm_num = 6; |
| data->has_fan_div = true; |
| data->temp_fixed_num = 3; |
| data->num_temp_alarms = 3; |
| data->num_temp_beeps = 3; |
| |
| data->ALARM_BITS = NCT6775_ALARM_BITS; |
| data->BEEP_BITS = NCT6775_BEEP_BITS; |
| |
| data->fan_from_reg = fan_from_reg16; |
| data->fan_from_reg_min = fan_from_reg8; |
| data->target_temp_mask = 0x7f; |
| data->tolerance_mask = 0x0f; |
| data->speed_tolerance_limit = 15; |
| |
| data->temp_label = nct6775_temp_label; |
| data->temp_mask = NCT6775_TEMP_MASK; |
| data->virt_temp_mask = NCT6775_VIRT_TEMP_MASK; |
| |
| data->REG_CONFIG = NCT6775_REG_CONFIG; |
| data->REG_VBAT = NCT6775_REG_VBAT; |
| data->REG_DIODE = NCT6775_REG_DIODE; |
| data->DIODE_MASK = NCT6775_DIODE_MASK; |
| data->REG_VIN = NCT6775_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; |
| data->REG_TARGET = NCT6775_REG_TARGET; |
| data->REG_FAN = NCT6775_REG_FAN; |
| data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6775_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6775_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME; |
| data->REG_PWM[0] = NCT6775_REG_PWM; |
| data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[3] = NCT6775_REG_FAN_MAX_OUTPUT; |
| data->REG_PWM[4] = NCT6775_REG_FAN_STEP_OUTPUT; |
| data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM_READ = NCT6775_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6775_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6775_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6775_REG_ALARM; |
| data->REG_BEEP = NCT6775_REG_BEEP; |
| data->REG_TSI_TEMP = NCT6775_REG_TSI_TEMP; |
| |
| reg_temp = NCT6775_REG_TEMP; |
| reg_temp_mon = NCT6775_REG_TEMP_MON; |
| num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP); |
| num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON); |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6775_REG_TSI_TEMP); |
| reg_temp_over = NCT6775_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6775_REG_TEMP_HYST; |
| reg_temp_config = NCT6775_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6775_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6775_REG_TEMP_CRIT; |
| |
| break; |
| case nct6776: |
| data->in_num = 9; |
| data->pwm_num = 3; |
| data->auto_pwm_num = 4; |
| data->has_fan_div = false; |
| data->temp_fixed_num = 3; |
| data->num_temp_alarms = 3; |
| data->num_temp_beeps = 6; |
| |
| data->ALARM_BITS = NCT6776_ALARM_BITS; |
| data->BEEP_BITS = NCT6776_BEEP_BITS; |
| |
| data->fan_from_reg = fan_from_reg13; |
| data->fan_from_reg_min = fan_from_reg13; |
| data->target_temp_mask = 0xff; |
| data->tolerance_mask = 0x07; |
| data->speed_tolerance_limit = 63; |
| |
| data->temp_label = nct6776_temp_label; |
| data->temp_mask = NCT6776_TEMP_MASK; |
| data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; |
| |
| data->REG_CONFIG = NCT6775_REG_CONFIG; |
| data->REG_VBAT = NCT6775_REG_VBAT; |
| data->REG_DIODE = NCT6775_REG_DIODE; |
| data->DIODE_MASK = NCT6775_DIODE_MASK; |
| data->REG_VIN = NCT6775_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; |
| data->REG_TARGET = NCT6775_REG_TARGET; |
| data->REG_FAN = NCT6775_REG_FAN; |
| data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6775_REG_PWM; |
| data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6775_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6775_REG_ALARM; |
| data->REG_BEEP = NCT6776_REG_BEEP; |
| data->REG_TSI_TEMP = NCT6776_REG_TSI_TEMP; |
| |
| reg_temp = NCT6775_REG_TEMP; |
| reg_temp_mon = NCT6775_REG_TEMP_MON; |
| num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP); |
| num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON); |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6776_REG_TSI_TEMP); |
| reg_temp_over = NCT6775_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6775_REG_TEMP_HYST; |
| reg_temp_config = NCT6776_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6776_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6776_REG_TEMP_CRIT; |
| |
| break; |
| case nct6779: |
| data->in_num = 15; |
| data->pwm_num = 5; |
| data->auto_pwm_num = 4; |
| data->has_fan_div = false; |
| data->temp_fixed_num = 6; |
| data->num_temp_alarms = 2; |
| data->num_temp_beeps = 2; |
| |
| data->ALARM_BITS = NCT6779_ALARM_BITS; |
| data->BEEP_BITS = NCT6779_BEEP_BITS; |
| |
| data->fan_from_reg = fan_from_reg_rpm; |
| data->fan_from_reg_min = fan_from_reg13; |
| data->target_temp_mask = 0xff; |
| data->tolerance_mask = 0x07; |
| data->speed_tolerance_limit = 63; |
| |
| data->temp_label = nct6779_temp_label; |
| data->temp_mask = NCT6779_TEMP_MASK; |
| data->virt_temp_mask = NCT6779_VIRT_TEMP_MASK; |
| |
| data->REG_CONFIG = NCT6775_REG_CONFIG; |
| data->REG_VBAT = NCT6775_REG_VBAT; |
| data->REG_DIODE = NCT6775_REG_DIODE; |
| data->DIODE_MASK = NCT6775_DIODE_MASK; |
| data->REG_VIN = NCT6779_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; |
| data->REG_TARGET = NCT6775_REG_TARGET; |
| data->REG_FAN = NCT6779_REG_FAN; |
| data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6775_REG_PWM; |
| data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6775_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; |
| data->CRITICAL_PWM_ENABLE_MASK |
| = NCT6779_CRITICAL_PWM_ENABLE_MASK; |
| data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; |
| data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6779_REG_ALARM; |
| data->REG_BEEP = NCT6776_REG_BEEP; |
| data->REG_TSI_TEMP = NCT6776_REG_TSI_TEMP; |
| |
| reg_temp = NCT6779_REG_TEMP; |
| reg_temp_mon = NCT6779_REG_TEMP_MON; |
| num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); |
| num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON); |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6776_REG_TSI_TEMP); |
| reg_temp_over = NCT6779_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6779_REG_TEMP_HYST; |
| reg_temp_config = NCT6779_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6779_REG_TEMP_CRIT; |
| |
| break; |
| case nct6791: |
| case nct6792: |
| case nct6793: |
| case nct6795: |
| case nct6796: |
| case nct6797: |
| data->in_num = 15; |
| data->pwm_num = (data->kind == nct6796 || |
| data->kind == nct6797) ? 7 : 6; |
| data->auto_pwm_num = 4; |
| data->has_fan_div = false; |
| data->temp_fixed_num = 6; |
| data->num_temp_alarms = 2; |
| data->num_temp_beeps = 2; |
| |
| data->ALARM_BITS = NCT6791_ALARM_BITS; |
| data->BEEP_BITS = NCT6779_BEEP_BITS; |
| |
| data->fan_from_reg = fan_from_reg_rpm; |
| data->fan_from_reg_min = fan_from_reg13; |
| data->target_temp_mask = 0xff; |
| data->tolerance_mask = 0x07; |
| data->speed_tolerance_limit = 63; |
| |
| switch (data->kind) { |
| default: |
| case nct6791: |
| data->temp_label = nct6779_temp_label; |
| data->temp_mask = NCT6791_TEMP_MASK; |
| data->virt_temp_mask = NCT6791_VIRT_TEMP_MASK; |
| break; |
| case nct6792: |
| data->temp_label = nct6792_temp_label; |
| data->temp_mask = NCT6792_TEMP_MASK; |
| data->virt_temp_mask = NCT6792_VIRT_TEMP_MASK; |
| break; |
| case nct6793: |
| data->temp_label = nct6793_temp_label; |
| data->temp_mask = NCT6793_TEMP_MASK; |
| data->virt_temp_mask = NCT6793_VIRT_TEMP_MASK; |
| break; |
| case nct6795: |
| case nct6797: |
| data->temp_label = nct6795_temp_label; |
| data->temp_mask = NCT6795_TEMP_MASK; |
| data->virt_temp_mask = NCT6795_VIRT_TEMP_MASK; |
| break; |
| case nct6796: |
| data->temp_label = nct6796_temp_label; |
| data->temp_mask = NCT6796_TEMP_MASK; |
| data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK; |
| break; |
| } |
| |
| data->REG_CONFIG = NCT6775_REG_CONFIG; |
| data->REG_VBAT = NCT6775_REG_VBAT; |
| data->REG_DIODE = NCT6775_REG_DIODE; |
| data->DIODE_MASK = NCT6775_DIODE_MASK; |
| data->REG_VIN = NCT6779_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; |
| data->REG_TARGET = NCT6775_REG_TARGET; |
| data->REG_FAN = NCT6779_REG_FAN; |
| data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6775_REG_PWM; |
| data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6791_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6791_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6775_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE |
| = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; |
| data->CRITICAL_PWM_ENABLE_MASK |
| = NCT6779_CRITICAL_PWM_ENABLE_MASK; |
| data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; |
| data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6791_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6791_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6791_REG_ALARM; |
| if (data->kind == nct6791) |
| data->REG_BEEP = NCT6776_REG_BEEP; |
| else |
| data->REG_BEEP = NCT6792_REG_BEEP; |
| switch (data->kind) { |
| case nct6791: |
| case nct6792: |
| case nct6793: |
| data->REG_TSI_TEMP = NCT6776_REG_TSI_TEMP; |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6776_REG_TSI_TEMP); |
| break; |
| case nct6795: |
| case nct6796: |
| case nct6797: |
| data->REG_TSI_TEMP = NCT6796_REG_TSI_TEMP; |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6796_REG_TSI_TEMP); |
| break; |
| default: |
| num_reg_tsi_temp = 0; |
| break; |
| } |
| |
| reg_temp = NCT6779_REG_TEMP; |
| num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); |
| if (data->kind == nct6791) { |
| reg_temp_mon = NCT6779_REG_TEMP_MON; |
| num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON); |
| } else { |
| reg_temp_mon = NCT6792_REG_TEMP_MON; |
| num_reg_temp_mon = ARRAY_SIZE(NCT6792_REG_TEMP_MON); |
| } |
| reg_temp_over = NCT6779_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6779_REG_TEMP_HYST; |
| reg_temp_config = NCT6779_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6779_REG_TEMP_CRIT; |
| |
| break; |
| case nct6798: |
| case nct6799: |
| data->in_num = data->kind == nct6799 ? 18 : 15; |
| data->scale_in = scale_in_6798; |
| data->pwm_num = 7; |
| data->auto_pwm_num = 4; |
| data->has_fan_div = false; |
| data->temp_fixed_num = 6; |
| data->num_temp_alarms = 7; |
| data->num_temp_beeps = 8; |
| |
| data->ALARM_BITS = NCT6799_ALARM_BITS; |
| data->BEEP_BITS = NCT6799_BEEP_BITS; |
| |
| data->fan_from_reg = fan_from_reg_rpm; |
| data->fan_from_reg_min = fan_from_reg13; |
| data->target_temp_mask = 0xff; |
| data->tolerance_mask = 0x07; |
| data->speed_tolerance_limit = 63; |
| |
| switch (data->kind) { |
| default: |
| case nct6798: |
| data->temp_label = nct6798_temp_label; |
| data->temp_mask = NCT6798_TEMP_MASK; |
| data->virt_temp_mask = NCT6798_VIRT_TEMP_MASK; |
| break; |
| case nct6799: |
| data->temp_label = nct6799_temp_label; |
| data->temp_mask = NCT6799_TEMP_MASK; |
| data->virt_temp_mask = NCT6799_VIRT_TEMP_MASK; |
| break; |
| } |
| |
| data->REG_CONFIG = NCT6775_REG_CONFIG; |
| data->REG_VBAT = NCT6775_REG_VBAT; |
| data->REG_DIODE = NCT6775_REG_DIODE; |
| data->DIODE_MASK = NCT6775_DIODE_MASK; |
| data->REG_VIN = NCT6779_REG_IN; |
| data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; |
| data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; |
| data->REG_TARGET = NCT6775_REG_TARGET; |
| data->REG_FAN = NCT6779_REG_FAN; |
| data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; |
| data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; |
| data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; |
| data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; |
| data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; |
| data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; |
| data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; |
| data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; |
| data->REG_PWM[0] = NCT6775_REG_PWM; |
| data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; |
| data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; |
| data->REG_PWM[5] = NCT6791_REG_WEIGHT_DUTY_STEP; |
| data->REG_PWM[6] = NCT6791_REG_WEIGHT_DUTY_BASE; |
| data->REG_PWM_READ = NCT6775_REG_PWM_READ; |
| data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; |
| data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; |
| data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; |
| data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; |
| data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; |
| data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; |
| data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; |
| data->CRITICAL_PWM_ENABLE_MASK = NCT6779_CRITICAL_PWM_ENABLE_MASK; |
| data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; |
| data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; |
| data->REG_TEMP_SOURCE = NCT6798_REG_TEMP_SOURCE; |
| data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; |
| data->REG_WEIGHT_TEMP_SEL = NCT6791_REG_WEIGHT_TEMP_SEL; |
| data->REG_WEIGHT_TEMP[0] = NCT6791_REG_WEIGHT_TEMP_STEP; |
| data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL; |
| data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE; |
| data->REG_ALARM = NCT6799_REG_ALARM; |
| data->REG_BEEP = NCT6792_REG_BEEP; |
| data->REG_TSI_TEMP = NCT6796_REG_TSI_TEMP; |
| num_reg_tsi_temp = ARRAY_SIZE(NCT6796_REG_TSI_TEMP); |
| |
| reg_temp = NCT6798_REG_TEMP; |
| num_reg_temp = ARRAY_SIZE(NCT6798_REG_TEMP); |
| reg_temp_mon = NCT6798_REG_TEMP_MON; |
| num_reg_temp_mon = ARRAY_SIZE(NCT6798_REG_TEMP_MON); |
| reg_temp_over = NCT6798_REG_TEMP_OVER; |
| reg_temp_hyst = NCT6798_REG_TEMP_HYST; |
| reg_temp_config = NCT6779_REG_TEMP_CONFIG; |
| reg_temp_alternate = NCT6798_REG_TEMP_ALTERNATE; |
| reg_temp_crit = NCT6798_REG_TEMP_CRIT; |
| |
| break; |
| default: |
| return -ENODEV; |
| } |
| data->have_in = BIT(data->in_num) - 1; |
| data->have_temp = 0; |
| |
| /* |
| * On some boards, not all available temperature sources are monitored, |
| * even though some of the monitoring registers are unused. |
| * Get list of unused monitoring registers, then detect if any fan |
| * controls are configured to use unmonitored temperature sources. |
| * If so, assign the unmonitored temperature sources to available |
| * monitoring registers. |
| */ |
| mask = 0; |
| available = 0; |
| for (i = 0; i < num_reg_temp; i++) { |
| if (reg_temp[i] == 0) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_TEMP_SOURCE[i], &src); |
| if (err) |
| return err; |
| src &= 0x1f; |
| if (!src || (mask & BIT(src))) |
| available |= BIT(i); |
| |
| mask |= BIT(src); |
| } |
| |
| /* |
| * Now find unmonitored temperature registers and enable monitoring |
| * if additional monitoring registers are available. |
| */ |
| err = add_temp_sensors(data, data->REG_TEMP_SEL, &available, &mask); |
| if (err) |
| return err; |
| err = add_temp_sensors(data, data->REG_WEIGHT_TEMP_SEL, &available, &mask); |
| if (err) |
| return err; |
| |
| mask = 0; |
| s = NUM_TEMP_FIXED; /* First dynamic temperature attribute */ |
| for (i = 0; i < num_reg_temp; i++) { |
| if (reg_temp[i] == 0) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_TEMP_SOURCE[i], &src); |
| if (err) |
| return err; |
| src &= 0x1f; |
| if (!src || (mask & BIT(src))) |
| continue; |
| |
| if (!(data->temp_mask & BIT(src))) { |
| dev_info(dev, |
| "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n", |
| src, i, data->REG_TEMP_SOURCE[i], reg_temp[i]); |
| continue; |
| } |
| |
| mask |= BIT(src); |
| |
| /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */ |
| if (src <= data->temp_fixed_num) { |
| data->have_temp |= BIT(src - 1); |
| data->have_temp_fixed |= BIT(src - 1); |
| data->reg_temp[0][src - 1] = reg_temp[i]; |
| data->reg_temp[1][src - 1] = reg_temp_over[i]; |
| data->reg_temp[2][src - 1] = reg_temp_hyst[i]; |
| if (reg_temp_crit_h && reg_temp_crit_h[i]) |
| data->reg_temp[3][src - 1] = reg_temp_crit_h[i]; |
| else if (reg_temp_crit[src - 1]) |
| data->reg_temp[3][src - 1] |
| = reg_temp_crit[src - 1]; |
| if (reg_temp_crit_l && reg_temp_crit_l[i]) |
| data->reg_temp[4][src - 1] = reg_temp_crit_l[i]; |
| data->reg_temp_config[src - 1] = reg_temp_config[i]; |
| data->temp_src[src - 1] = src; |
| continue; |
| } |
| |
| if (s >= NUM_TEMP) |
| continue; |
| |
| /* Use dynamic index for other sources */ |
| data->have_temp |= BIT(s); |
| data->reg_temp[0][s] = reg_temp[i]; |
| data->reg_temp[1][s] = reg_temp_over[i]; |
| data->reg_temp[2][s] = reg_temp_hyst[i]; |
| data->reg_temp_config[s] = reg_temp_config[i]; |
| if (reg_temp_crit_h && reg_temp_crit_h[i]) |
| data->reg_temp[3][s] = reg_temp_crit_h[i]; |
| else if (reg_temp_crit[src - 1]) |
| data->reg_temp[3][s] = reg_temp_crit[src - 1]; |
| if (reg_temp_crit_l && reg_temp_crit_l[i]) |
| data->reg_temp[4][s] = reg_temp_crit_l[i]; |
| |
| data->temp_src[s] = src; |
| s++; |
| } |
| |
| /* |
| * Repeat with temperatures used for fan control. |
| * This set of registers does not support limits. |
| */ |
| for (i = 0; i < num_reg_temp_mon; i++) { |
| if (reg_temp_mon[i] == 0) |
| continue; |
| |
| err = nct6775_read_value(data, data->REG_TEMP_SEL[i], &src); |
| if (err) |
| return err; |
| src &= 0x1f; |
| if (!src) |
| continue; |
| |
| if (!(data->temp_mask & BIT(src))) { |
| dev_info(dev, |
| "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n", |
| src, i, data->REG_TEMP_SEL[i], |
| reg_temp_mon[i]); |
| continue; |
| } |
| |
| /* |
| * For virtual temperature sources, the 'virtual' temperature |
| * for each fan reflects a different temperature, and there |
| * are no duplicates. |
| */ |
| if (!(data->virt_temp_mask & BIT(src))) { |
| if (mask & BIT(src)) |
| continue; |
| mask |= BIT(src); |
| } |
| |
| /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */ |
| if (src <= data->temp_fixed_num) { |
| if (data->have_temp & BIT(src - 1)) |
| continue; |
| data->have_temp |= BIT(src - 1); |
| data->have_temp_fixed |= BIT(src - 1); |
| data->reg_temp[0][src - 1] = reg_temp_mon[i]; |
| data->temp_src[src - 1] = src; |
| continue; |
| } |
| |
| if (s >= NUM_TEMP) |
| continue; |
| |
| /* Use dynamic index for other sources */ |
| data->have_temp |= BIT(s); |
| data->reg_temp[0][s] = reg_temp_mon[i]; |
| data->temp_src[s] = src; |
| s++; |
| } |
| |
| #ifdef USE_ALTERNATE |
| /* |
| * Go through the list of alternate temp registers and enable |
| * if possible. |
| * The temperature is already monitored if the respective bit in <mask> |
| * is set. |
| */ |
| for (i = 0; i < 31; i++) { |
| if (!(data->temp_mask & BIT(i + 1))) |
| continue; |
| if (!reg_temp_alternate[i]) |
| continue; |
| if (mask & BIT(i + 1)) |
| continue; |
| if (i < data->temp_fixed_num) { |
| if (data->have_temp & BIT(i)) |
| continue; |
| data->have_temp |= BIT(i); |
| data->have_temp_fixed |= BIT(i); |
| data->reg_temp[0][i] = reg_temp_alternate[i]; |
| if (i < num_reg_temp) { |
| data->reg_temp[1][i] = reg_temp_over[i]; |
| data->reg_temp[2][i] = reg_temp_hyst[i]; |
| } |
| data->temp_src[i] = i + 1; |
| continue; |
| } |
| |
| if (s >= NUM_TEMP) /* Abort if no more space */ |
| break; |
| |
| data->have_temp |= BIT(s); |
| data->reg_temp[0][s] = reg_temp_alternate[i]; |
| data->temp_src[s] = i + 1; |
| s++; |
| } |
| #endif /* USE_ALTERNATE */ |
| |
| /* Check which TSIx_TEMP registers are active */ |
| for (i = 0; i < num_reg_tsi_temp; i++) { |
| u16 tmp; |
| |
| err = nct6775_read_value(data, data->REG_TSI_TEMP[i], &tmp); |
| if (err) |
| return err; |
| if (tmp) |
| data->have_tsi_temp |= BIT(i); |
| } |
| |
| /* Initialize the chip */ |
| err = nct6775_init_device(data); |
| if (err) |
| return err; |
| |
| if (data->driver_init) { |
| err = data->driver_init(data); |
| if (err) |
| return err; |
| } |
| |
| /* Read fan clock dividers immediately */ |
| err = nct6775_init_fan_common(dev, data); |
| if (err) |
| return err; |
| |
| /* Register sysfs hooks */ |
| err = nct6775_add_template_attr_group(dev, data, &nct6775_pwm_template_group, |
| data->pwm_num); |
| if (err) |
| return err; |
| |
| err = nct6775_add_template_attr_group(dev, data, &nct6775_in_template_group, |
| fls(data->have_in)); |
| if (err) |
| return err; |
| |
| err = nct6775_add_template_attr_group(dev, data, &nct6775_fan_template_group, |
| fls(data->has_fan)); |
| if (err) |
| return err; |
| |
| err = nct6775_add_template_attr_group(dev, data, &nct6775_temp_template_group, |
| fls(data->have_temp)); |
| if (err) |
| return err; |
| |
| if (data->have_tsi_temp) { |
| tsi_temp_tg.templates = nct6775_tsi_temp_template; |
| tsi_temp_tg.is_visible = nct6775_tsi_temp_is_visible; |
| tsi_temp_tg.base = fls(data->have_temp) + 1; |
| err = nct6775_add_template_attr_group(dev, data, &tsi_temp_tg, |
| fls(data->have_tsi_temp)); |
| if (err) |
| return err; |
| } |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, data->name, |
| data, data->groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| EXPORT_SYMBOL_GPL(nct6775_probe); |
| |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); |
| MODULE_DESCRIPTION("Core driver for NCT6775F and compatible chips"); |
| MODULE_LICENSE("GPL"); |