| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # PMBus chip drivers configuration |
| # |
| |
| menuconfig PMBUS |
| tristate "PMBus support" |
| depends on I2C |
| help |
| Say yes here if you want to enable PMBus support. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus_core. |
| |
| if PMBUS |
| |
| config SENSORS_PMBUS |
| tristate "Generic PMBus devices" |
| default y |
| help |
| If you say yes here you get hardware monitoring support for generic |
| PMBus devices, including but not limited to ADP4000, BMR310, BMR453, |
| BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492, |
| MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, |
| TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus. |
| |
| config SENSORS_ACBEL_FSG032 |
| tristate "ACBEL FSG032 Power Supply" |
| help |
| If you say yes here you get hardware monitoring support for the ACBEL |
| FSG032 Power Supply. |
| |
| This driver can also be built as a module. If so, the module will |
| be called acbel-fsg032. |
| |
| config SENSORS_ADM1266 |
| tristate "Analog Devices ADM1266 Sequencer" |
| select CRC8 |
| depends on GPIOLIB |
| help |
| If you say yes here you get hardware monitoring support for Analog |
| Devices ADM1266 Cascadable Super Sequencer. |
| |
| This driver can also be built as a module. If so, the module will |
| be called adm1266. |
| |
| config SENSORS_ADM1275 |
| tristate "Analog Devices ADM1275 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Analog |
| Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, |
| and ADM1294 Hot-Swap Controller and Digital Power Monitors. |
| |
| This driver can also be built as a module. If so, the module will |
| be called adm1275. |
| |
| config SENSORS_BEL_PFE |
| tristate "Bel PFE Compatible Power Supplies" |
| help |
| If you say yes here you get hardware monitoring support for BEL |
| PFE1100 and PFE3000 Power Supplies. |
| |
| This driver can also be built as a module. If so, the module will |
| be called bel-pfe. |
| |
| config SENSORS_BPA_RS600 |
| tristate "BluTek BPA-RS600 Power Supplies" |
| help |
| If you say yes here you get hardware monitoring support for BluTek |
| BPA-RS600 Power Supplies. |
| |
| This driver can also be built as a module. If so, the module will |
| be called bpa-rs600. |
| |
| config SENSORS_DELTA_AHE50DC_FAN |
| tristate "Delta AHE-50DC fan control module" |
| help |
| If you say yes here you get hardware monitoring support for |
| the integrated fan control module of the Delta AHE-50DC |
| Open19 power shelf. |
| |
| This driver can also be built as a module. If so, the module |
| will be called delta-ahe50dc-fan. |
| |
| config SENSORS_FSP_3Y |
| tristate "FSP/3Y-Power power supplies" |
| help |
| If you say yes here you get hardware monitoring support for |
| FSP/3Y-Power hot-swap power supplies. |
| Supported models: YH-5151E, YM-2151E |
| |
| This driver can also be built as a module. If so, the module will |
| be called fsp-3y. |
| |
| config SENSORS_IBM_CFFPS |
| tristate "IBM Common Form Factor Power Supply" |
| depends on LEDS_CLASS |
| help |
| If you say yes here you get hardware monitoring support for the IBM |
| Common Form Factor power supply. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ibm-cffps. |
| |
| config SENSORS_DPS920AB |
| tristate "Delta DPS920AB Power Supply" |
| help |
| If you say yes here you get hardware monitoring support for Delta |
| DPS920AB Power Supplies. |
| |
| This driver can also be built as a module. If so, the module will |
| be called dps920ab. |
| |
| config SENSORS_INSPUR_IPSPS |
| tristate "INSPUR Power System Power Supply" |
| help |
| If you say yes here you get hardware monitoring support for the INSPUR |
| Power System power supply. |
| |
| This driver can also be built as a module. If so, the module will |
| be called inspur-ipsps. |
| |
| config SENSORS_IR35221 |
| tristate "Infineon IR35221" |
| help |
| If you say yes here you get hardware monitoring support for the |
| Infineon IR35221 controller. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ir35221. |
| |
| config SENSORS_IR36021 |
| tristate "Infineon IR36021" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| IR36021. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ir36021. |
| |
| config SENSORS_IR38064 |
| tristate "Infineon IR38064 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| IR38060, IR38064, IR38164 and IR38263. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ir38064. |
| |
| config SENSORS_IR38064_REGULATOR |
| bool "Regulator support for IR38064 and compatibles" |
| depends on SENSORS_IR38064 && REGULATOR |
| help |
| Uses the IR38064 or compatible as regulator. |
| |
| config SENSORS_IRPS5401 |
| tristate "Infineon IRPS5401" |
| help |
| If you say yes here you get hardware monitoring support for the |
| Infineon IRPS5401 controller. |
| |
| This driver can also be built as a module. If so, the module will |
| be called irps5401. |
| |
| config SENSORS_ISL68137 |
| tristate "Renesas Digital Multiphase Voltage Regulators" |
| help |
| If you say yes here you get hardware monitoring support for Renesas |
| digital multiphase voltage regulators. |
| |
| This driver can also be built as a module. If so, the module will |
| be called isl68137. |
| |
| config SENSORS_LM25066 |
| tristate "National Semiconductor LM25066 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for National |
| Semiconductor LM25056, LM25066, LM5064, and LM5066. |
| |
| This driver can also be built as a module. If so, the module will |
| be called lm25066. |
| |
| config SENSORS_LM25066_REGULATOR |
| bool "Regulator support for LM25066 and compatibles" |
| depends on SENSORS_LM25066 && REGULATOR |
| help |
| If you say yes here you get regulator support for National |
| Semiconductor LM25066, LM5064, and LM5066. |
| |
| config SENSORS_LT7182S |
| tristate "Analog Devices LT7182S" |
| help |
| If you say yes here you get hardware monitoring support for Analog |
| Devices LT7182S. |
| |
| This driver can also be built as a module. If so, the module will |
| be called lt7182s. |
| |
| config SENSORS_LTC2978 |
| tristate "Linear Technologies LTC2978 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Linear |
| Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979, |
| LTC2980, and LTM2987. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc2978. |
| |
| config SENSORS_LTC2978_REGULATOR |
| bool "Regulator support for LTC2978 and compatibles" |
| depends on SENSORS_LTC2978 && REGULATOR |
| help |
| If you say yes here you get regulator support for Linear Technology |
| LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880, |
| LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686, |
| and LTM4700. |
| |
| config SENSORS_LTC3815 |
| tristate "Linear Technologies LTC3815" |
| help |
| If you say yes here you get hardware monitoring support for Linear |
| Technology LTC3815. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc3815. |
| |
| config SENSORS_MAX15301 |
| tristate "Maxim MAX15301" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX15301, as well as for Flex BMR461. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max15301. |
| |
| config SENSORS_MAX16064 |
| tristate "Maxim MAX16064" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX16064. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max16064. |
| |
| config SENSORS_MAX16601 |
| tristate "Maxim MAX16508, MAX16600, MAX16601, and MAX16602" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX16508, MAX16600, MAX16601, and MAX16602. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max16601. |
| |
| config SENSORS_MAX20730 |
| tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX20710, MAX20730, MAX20734, and MAX20743. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max20730. |
| |
| config SENSORS_MAX20751 |
| tristate "Maxim MAX20751" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX20751. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max20751. |
| |
| config SENSORS_MAX31785 |
| tristate "Maxim MAX31785 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX31785. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max31785. |
| |
| config SENSORS_MAX34440 |
| tristate "Maxim MAX34440 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max34440. |
| |
| config SENSORS_MAX8688 |
| tristate "Maxim MAX8688" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX8688. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max8688. |
| |
| config SENSORS_MP2888 |
| tristate "MPS MP2888" |
| help |
| If you say yes here you get hardware monitoring support for MPS |
| MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mp2888. |
| |
| config SENSORS_MP2975 |
| tristate "MPS MP2975" |
| help |
| If you say yes here you get hardware monitoring support for MPS |
| MP2975 Dual Loop Digital Multi-Phase Controller. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mp2975. |
| |
| config SENSORS_MP2975_REGULATOR |
| depends on SENSORS_MP2975 && REGULATOR |
| bool "Regulator support for MPS MP2975" |
| help |
| If you say yes here you get regulator support for MPS MP2975 |
| Dual Loop Digital Multi-Phase Controller. |
| |
| config SENSORS_MP5023 |
| tristate "MPS MP5023" |
| help |
| If you say yes here you get hardware monitoring support for MPS |
| MP5023. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mp5023. |
| |
| config SENSORS_MPQ7932_REGULATOR |
| bool "Regulator support for MPQ7932" |
| depends on SENSORS_MPQ7932 && REGULATOR |
| help |
| If you say yes here you get six integrated buck converter regulator |
| support for power management IC MPS MPQ7932. |
| |
| config SENSORS_MPQ7932 |
| tristate "MPS MPQ7932" |
| help |
| If you say yes here you get hardware monitoring functionality support |
| for power management IC MPS MPQ7932. |
| |
| This driver can also be built as a module. If so, the module will |
| be called mpq7932. |
| |
| config SENSORS_PIM4328 |
| tristate "Flex PIM4328 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Flex |
| PIM4328, PIM4820 and PIM4006 Power Interface Modules. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pim4328. |
| |
| config SENSORS_PLI1209BC |
| tristate "Vicor PLI1209BC" |
| help |
| If you say yes here you get hardware monitoring support for Vicor |
| PLI1209BC Digital Supervisor. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pli1209bc. |
| |
| config SENSORS_PLI1209BC_REGULATOR |
| bool "Regulator support for PLI1209BC" |
| depends on SENSORS_PLI1209BC && REGULATOR |
| help |
| If you say yes here you get regulator support for Vicor PLI1209BC |
| Digital Supervisor. |
| |
| config SENSORS_PM6764TR |
| tristate "ST PM6764TR" |
| help |
| If you say yes here you get hardware monitoring support for ST |
| PM6764TR. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pm6764tr. |
| |
| config SENSORS_PXE1610 |
| tristate "Infineon PXE1610" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| PXE1610. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pxe1610. |
| |
| config SENSORS_Q54SJ108A2 |
| tristate "Delta Power Supplies Q54SJ108A2" |
| help |
| If you say yes here you get hardware monitoring support for Delta |
| Q54SJ108A2 series Power Supplies. |
| |
| This driver can also be built as a module. If so, the module will |
| be called q54sj108a2. |
| |
| config SENSORS_STPDDC60 |
| tristate "ST STPDDC60" |
| help |
| If you say yes here you get hardware monitoring support for ST |
| STPDDC60 Universal Digital Multicell Controller, as well as for |
| Flex BMR481. |
| |
| This driver can also be built as a module. If so, the module will |
| be called stpddc60. |
| |
| config SENSORS_TDA38640 |
| tristate "Infineon TDA38640" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| TDA38640. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tda38640. |
| |
| config SENSORS_TDA38640_REGULATOR |
| bool "Regulator support for TDA38640 and compatibles" |
| depends on SENSORS_TDA38640 && REGULATOR |
| help |
| If you say yes here you get regulator support for Infineon |
| TDA38640 as regulator. |
| |
| config SENSORS_TPS40422 |
| tristate "TI TPS40422" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| TPS40422. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tps40422. |
| |
| config SENSORS_TPS53679 |
| tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tps53679. |
| |
| config SENSORS_TPS546D24 |
| tristate "TPS546D24" |
| help |
| If you say yes here you get hardware monitoring support for TEXAS |
| TPS546D24. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tps546d24 |
| |
| config SENSORS_UCD9000 |
| tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer |
| and System Health Controllers. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ucd9000. |
| |
| config SENSORS_UCD9200 |
| tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 |
| Digital PWM System Controllers. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ucd9200. |
| |
| config SENSORS_XDPE152 |
| tristate "Infineon XDPE152 family" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| XDPE15284, XDPE152C4, device. |
| |
| This driver can also be built as a module. If so, the module will |
| be called xdpe152c4. |
| |
| config SENSORS_XDPE122 |
| tristate "Infineon XDPE122 family" |
| help |
| If you say yes here you get hardware monitoring support for Infineon |
| XDPE12254, XDPE12284, device. |
| |
| This driver can also be built as a module. If so, the module will |
| be called xdpe12284. |
| |
| config SENSORS_XDPE122_REGULATOR |
| bool "Regulator support for XDPE122 and compatibles" |
| depends on SENSORS_XDPE122 && REGULATOR |
| help |
| Uses the xdpe12284 or compatible as regulator. |
| |
| config SENSORS_ZL6100 |
| tristate "Intersil ZL6100 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Intersil |
| ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, |
| ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for |
| Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. |
| |
| This driver can also be built as a module. If so, the module will |
| be called zl6100. |
| |
| endif # PMBUS |
