| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016-2018 Broadcom |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| |
| enum bcm_usb_phy_version { |
| BCM_SR_USB_COMBO_PHY, |
| BCM_SR_USB_HS_PHY, |
| }; |
| |
| enum bcm_usb_phy_reg { |
| PLL_CTRL, |
| PHY_CTRL, |
| PHY_PLL_CTRL, |
| }; |
| |
| /* USB PHY registers */ |
| |
| static const u8 bcm_usb_combo_phy_ss[] = { |
| [PLL_CTRL] = 0x18, |
| [PHY_CTRL] = 0x14, |
| }; |
| |
| static const u8 bcm_usb_combo_phy_hs[] = { |
| [PLL_CTRL] = 0x0c, |
| [PHY_CTRL] = 0x10, |
| }; |
| |
| static const u8 bcm_usb_hs_phy[] = { |
| [PLL_CTRL] = 0x8, |
| [PHY_CTRL] = 0xc, |
| }; |
| |
| enum pll_ctrl_bits { |
| PLL_RESETB, |
| SSPLL_SUSPEND_EN, |
| PLL_SEQ_START, |
| PLL_LOCK, |
| }; |
| |
| static const u8 u3pll_ctrl[] = { |
| [PLL_RESETB] = 0, |
| [SSPLL_SUSPEND_EN] = 1, |
| [PLL_SEQ_START] = 2, |
| [PLL_LOCK] = 3, |
| }; |
| |
| #define HSPLL_PDIV_MASK 0xF |
| #define HSPLL_PDIV_VAL 0x1 |
| |
| static const u8 u2pll_ctrl[] = { |
| [PLL_RESETB] = 5, |
| [PLL_LOCK] = 6, |
| }; |
| |
| enum bcm_usb_phy_ctrl_bits { |
| CORERDY, |
| PHY_RESETB, |
| PHY_PCTL, |
| }; |
| |
| #define PHY_PCTL_MASK 0xffff |
| #define SSPHY_PCTL_VAL 0x0006 |
| |
| static const u8 u3phy_ctrl[] = { |
| [PHY_RESETB] = 1, |
| [PHY_PCTL] = 2, |
| }; |
| |
| static const u8 u2phy_ctrl[] = { |
| [CORERDY] = 0, |
| [PHY_RESETB] = 5, |
| [PHY_PCTL] = 6, |
| }; |
| |
| struct bcm_usb_phy_cfg { |
| uint32_t type; |
| uint32_t version; |
| void __iomem *regs; |
| struct phy *phy; |
| const u8 *offset; |
| }; |
| |
| #define PLL_LOCK_RETRY_COUNT 1000 |
| |
| enum bcm_usb_phy_type { |
| USB_HS_PHY, |
| USB_SS_PHY, |
| }; |
| |
| #define NUM_BCM_SR_USB_COMBO_PHYS 2 |
| |
| static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear) |
| { |
| writel(readl(addr) & ~clear, addr); |
| } |
| |
| static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set) |
| { |
| writel(readl(addr) | set, addr); |
| } |
| |
| static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit) |
| { |
| u32 data; |
| int ret; |
| |
| ret = readl_poll_timeout_atomic(addr, data, (data & bit), 1, |
| PLL_LOCK_RETRY_COUNT); |
| if (ret) |
| pr_err("%s: FAIL\n", __func__); |
| |
| return ret; |
| } |
| |
| static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg) |
| { |
| int ret = 0; |
| void __iomem *regs = phy_cfg->regs; |
| const u8 *offset; |
| u32 rd_data; |
| |
| offset = phy_cfg->offset; |
| |
| /* Set pctl with mode and soft reset */ |
| rd_data = readl(regs + offset[PHY_CTRL]); |
| rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]); |
| rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]); |
| writel(rd_data, regs + offset[PHY_CTRL]); |
| |
| bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], |
| BIT(u3pll_ctrl[SSPLL_SUSPEND_EN])); |
| bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], |
| BIT(u3pll_ctrl[PLL_SEQ_START])); |
| bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], |
| BIT(u3pll_ctrl[PLL_RESETB])); |
| |
| /* Maximum timeout for PLL reset done */ |
| msleep(30); |
| |
| ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], |
| BIT(u3pll_ctrl[PLL_LOCK])); |
| |
| return ret; |
| } |
| |
| static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) |
| { |
| int ret = 0; |
| void __iomem *regs = phy_cfg->regs; |
| const u8 *offset; |
| |
| offset = phy_cfg->offset; |
| |
| bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], |
| BIT(u2pll_ctrl[PLL_RESETB])); |
| bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], |
| BIT(u2pll_ctrl[PLL_RESETB])); |
| |
| ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], |
| BIT(u2pll_ctrl[PLL_LOCK])); |
| |
| return ret; |
| } |
| |
| static int bcm_usb_phy_reset(struct phy *phy) |
| { |
| struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); |
| void __iomem *regs = phy_cfg->regs; |
| const u8 *offset; |
| |
| offset = phy_cfg->offset; |
| |
| if (phy_cfg->type == USB_HS_PHY) { |
| bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL], |
| BIT(u2phy_ctrl[CORERDY])); |
| bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], |
| BIT(u2phy_ctrl[CORERDY])); |
| } |
| |
| return 0; |
| } |
| |
| static int bcm_usb_phy_init(struct phy *phy) |
| { |
| struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); |
| int ret = -EINVAL; |
| |
| if (phy_cfg->type == USB_SS_PHY) |
| ret = bcm_usb_ss_phy_init(phy_cfg); |
| else if (phy_cfg->type == USB_HS_PHY) |
| ret = bcm_usb_hs_phy_init(phy_cfg); |
| |
| return ret; |
| } |
| |
| static const struct phy_ops sr_phy_ops = { |
| .init = bcm_usb_phy_init, |
| .reset = bcm_usb_phy_reset, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy *bcm_usb_phy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct bcm_usb_phy_cfg *phy_cfg; |
| int phy_idx; |
| |
| phy_cfg = dev_get_drvdata(dev); |
| if (!phy_cfg) |
| return ERR_PTR(-EINVAL); |
| |
| if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) { |
| phy_idx = args->args[0]; |
| |
| if (WARN_ON(phy_idx > 1)) |
| return ERR_PTR(-ENODEV); |
| |
| return phy_cfg[phy_idx].phy; |
| } else |
| return phy_cfg->phy; |
| } |
| |
| static int bcm_usb_phy_create(struct device *dev, struct device_node *node, |
| void __iomem *regs, uint32_t version) |
| { |
| struct bcm_usb_phy_cfg *phy_cfg; |
| int idx; |
| |
| if (version == BCM_SR_USB_COMBO_PHY) { |
| phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS * |
| sizeof(struct bcm_usb_phy_cfg), |
| GFP_KERNEL); |
| if (!phy_cfg) |
| return -ENOMEM; |
| |
| for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) { |
| phy_cfg[idx].regs = regs; |
| phy_cfg[idx].version = version; |
| if (idx == 0) { |
| phy_cfg[idx].offset = bcm_usb_combo_phy_hs; |
| phy_cfg[idx].type = USB_HS_PHY; |
| } else { |
| phy_cfg[idx].offset = bcm_usb_combo_phy_ss; |
| phy_cfg[idx].type = USB_SS_PHY; |
| } |
| phy_cfg[idx].phy = devm_phy_create(dev, node, |
| &sr_phy_ops); |
| if (IS_ERR(phy_cfg[idx].phy)) |
| return PTR_ERR(phy_cfg[idx].phy); |
| |
| phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]); |
| } |
| } else if (version == BCM_SR_USB_HS_PHY) { |
| phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg), |
| GFP_KERNEL); |
| if (!phy_cfg) |
| return -ENOMEM; |
| |
| phy_cfg->regs = regs; |
| phy_cfg->version = version; |
| phy_cfg->offset = bcm_usb_hs_phy; |
| phy_cfg->type = USB_HS_PHY; |
| phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops); |
| if (IS_ERR(phy_cfg->phy)) |
| return PTR_ERR(phy_cfg->phy); |
| |
| phy_set_drvdata(phy_cfg->phy, phy_cfg); |
| } else |
| return -ENODEV; |
| |
| dev_set_drvdata(dev, phy_cfg); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id bcm_usb_phy_of_match[] = { |
| { |
| .compatible = "brcm,sr-usb-combo-phy", |
| .data = (void *)BCM_SR_USB_COMBO_PHY, |
| }, |
| { |
| .compatible = "brcm,sr-usb-hs-phy", |
| .data = (void *)BCM_SR_USB_HS_PHY, |
| }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match); |
| |
| static int bcm_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *dn = dev->of_node; |
| const struct of_device_id *of_id; |
| void __iomem *regs; |
| int ret; |
| enum bcm_usb_phy_version version; |
| struct phy_provider *phy_provider; |
| |
| regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| of_id = of_match_node(bcm_usb_phy_of_match, dn); |
| if (of_id) |
| version = (uintptr_t)of_id->data; |
| else |
| return -ENODEV; |
| |
| ret = bcm_usb_phy_create(dev, dn, regs, version); |
| if (ret) |
| return ret; |
| |
| phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver bcm_usb_phy_driver = { |
| .driver = { |
| .name = "phy-bcm-sr-usb", |
| .of_match_table = bcm_usb_phy_of_match, |
| }, |
| .probe = bcm_usb_phy_probe, |
| }; |
| module_platform_driver(bcm_usb_phy_driver); |
| |
| MODULE_AUTHOR("Broadcom"); |
| MODULE_DESCRIPTION("Broadcom stingray USB Phy driver"); |
| MODULE_LICENSE("GPL v2"); |