| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2014-2017 Broadcom |
| */ |
| |
| #ifndef _USB_BRCM_COMMON_INIT_H |
| #define _USB_BRCM_COMMON_INIT_H |
| |
| #include <linux/regmap.h> |
| |
| #define USB_CTLR_MODE_HOST 0 |
| #define USB_CTLR_MODE_DEVICE 1 |
| #define USB_CTLR_MODE_DRD 2 |
| #define USB_CTLR_MODE_TYPEC_PD 3 |
| |
| enum brcmusb_reg_sel { |
| BRCM_REGS_CTRL = 0, |
| BRCM_REGS_XHCI_EC, |
| BRCM_REGS_XHCI_GBL, |
| BRCM_REGS_USB_PHY, |
| BRCM_REGS_USB_MDIO, |
| BRCM_REGS_BDC_EC, |
| BRCM_REGS_MAX |
| }; |
| |
| #define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) |
| #define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) |
| #define USB_CTRL_MASK(reg, field) \ |
| USB_CTRL_##reg##_##field##_MASK |
| #define USB_CTRL_SET(base, reg, field) \ |
| brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \ |
| USB_CTRL_##reg##_##field##_MASK) |
| #define USB_CTRL_UNSET(base, reg, field) \ |
| brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ |
| USB_CTRL_##reg##_##field##_MASK) |
| |
| #define USB_XHCI_GBL_REG(base, reg) ((void __iomem *)base + USB_XHCI_GBL_##reg) |
| #define USB_XHCI_GBL_SET(base, reg, field) \ |
| brcm_usb_ctrl_set(USB_XHCI_GBL_REG(base, reg), \ |
| USB_XHCI_GBL_##reg##_##field##_MASK) |
| #define USB_XHCI_GBL_UNSET(base, reg, field) \ |
| brcm_usb_ctrl_unset(USB_XHCI_GBL_REG(base, reg), \ |
| USB_XHCI_GBL_##reg##_##field##_MASK) |
| |
| struct brcm_usb_init_params; |
| |
| struct brcm_usb_init_ops { |
| void (*init_ipp)(struct brcm_usb_init_params *params); |
| void (*init_common)(struct brcm_usb_init_params *params); |
| void (*init_eohci)(struct brcm_usb_init_params *params); |
| void (*init_xhci)(struct brcm_usb_init_params *params); |
| void (*uninit_common)(struct brcm_usb_init_params *params); |
| void (*uninit_eohci)(struct brcm_usb_init_params *params); |
| void (*uninit_xhci)(struct brcm_usb_init_params *params); |
| int (*get_dual_select)(struct brcm_usb_init_params *params); |
| void (*set_dual_select)(struct brcm_usb_init_params *params); |
| }; |
| |
| struct brcm_usb_init_params { |
| void __iomem *regs[BRCM_REGS_MAX]; |
| int ioc; |
| int ipp; |
| int supported_port_modes; |
| int port_mode; |
| u32 family_id; |
| u32 product_id; |
| int selected_family; |
| const char *family_name; |
| const u32 *usb_reg_bits_map; |
| const struct brcm_usb_init_ops *ops; |
| struct regmap *syscon_piarbctl; |
| bool wake_enabled; |
| }; |
| |
| void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params); |
| void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); |
| void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); |
| void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); |
| |
| static inline u32 brcm_usb_readl(void __iomem *addr) |
| { |
| /* |
| * MIPS endianness is configured by boot strap, which also reverses all |
| * bus endianness (i.e., big-endian CPU + big endian bus ==> native |
| * endian I/O). |
| * |
| * Other architectures (e.g., ARM) either do not support big endian, or |
| * else leave I/O in little endian mode. |
| */ |
| if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) |
| return __raw_readl(addr); |
| else |
| return readl_relaxed(addr); |
| } |
| |
| static inline void brcm_usb_writel(u32 val, void __iomem *addr) |
| { |
| /* See brcmnand_readl() comments */ |
| if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) |
| __raw_writel(val, addr); |
| else |
| writel_relaxed(val, addr); |
| } |
| |
| static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask) |
| { |
| brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg); |
| }; |
| |
| static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask) |
| { |
| brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg); |
| }; |
| |
| static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->init_ipp) |
| ini->ops->init_ipp(ini); |
| } |
| |
| static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->init_common) |
| ini->ops->init_common(ini); |
| } |
| |
| static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->init_eohci) |
| ini->ops->init_eohci(ini); |
| } |
| |
| static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->init_xhci) |
| ini->ops->init_xhci(ini); |
| } |
| |
| static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->uninit_common) |
| ini->ops->uninit_common(ini); |
| } |
| |
| static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->uninit_eohci) |
| ini->ops->uninit_eohci(ini); |
| } |
| |
| static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->uninit_xhci) |
| ini->ops->uninit_xhci(ini); |
| } |
| |
| static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->get_dual_select) |
| return ini->ops->get_dual_select(ini); |
| return 0; |
| } |
| |
| static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini) |
| { |
| if (ini->ops->set_dual_select) |
| ini->ops->set_dual_select(ini); |
| } |
| |
| #endif /* _USB_BRCM_COMMON_INIT_H */ |