| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Sunplus SP7021 USB 2.0 phy driver |
| * |
| * Copyright (C) 2022 Sunplus Technology Inc., All rights reserved. |
| * |
| * Note 1 : non-posted write command for the registers accesses of |
| * Sunplus SP7021. |
| * |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| |
| #define HIGH_MASK_BITS GENMASK(31, 16) |
| #define LOW_MASK_BITS GENMASK(15, 0) |
| #define OTP_DISC_LEVEL_DEFAULT 0xd |
| |
| /* GROUP UPHY */ |
| #define CONFIG1 0x4 |
| #define J_HS_TX_PWRSAV BIT(5) |
| #define CONFIG3 0xc |
| #define J_FORCE_DISC_ON BIT(5) |
| #define J_DEBUG_CTRL_ADDR_MACRO BIT(0) |
| #define CONFIG7 0x1c |
| #define J_DISC 0X1f |
| #define CONFIG9 0x24 |
| #define J_ECO_PATH BIT(6) |
| #define CONFIG16 0x40 |
| #define J_TBCWAIT_MASK GENMASK(6, 5) |
| #define J_TBCWAIT_1P1_MS FIELD_PREP(J_TBCWAIT_MASK, 0) |
| #define J_TVDM_SRC_DIS_MASK GENMASK(4, 3) |
| #define J_TVDM_SRC_DIS_8P2_MS FIELD_PREP(J_TVDM_SRC_DIS_MASK, 3) |
| #define J_TVDM_SRC_EN_MASK GENMASK(2, 1) |
| #define J_TVDM_SRC_EN_1P6_MS FIELD_PREP(J_TVDM_SRC_EN_MASK, 0) |
| #define J_BC_EN BIT(0) |
| #define CONFIG17 0x44 |
| #define IBG_TRIM0_MASK GENMASK(7, 5) |
| #define IBG_TRIM0_SSLVHT FIELD_PREP(IBG_TRIM0_MASK, 4) |
| #define J_VDATREE_TRIM_MASK GENMASK(4, 1) |
| #define J_VDATREE_TRIM_DEFAULT FIELD_PREP(J_VDATREE_TRIM_MASK, 9) |
| #define CONFIG23 0x5c |
| #define PROB_MASK GENMASK(5, 3) |
| #define PROB FIELD_PREP(PROB_MASK, 7) |
| |
| /* GROUP MOON4 */ |
| #define UPHY_CONTROL0 0x0 |
| #define UPHY_CONTROL1 0x4 |
| #define UPHY_CONTROL2 0x8 |
| #define MO1_UPHY_RX_CLK_SEL BIT(6) |
| #define MASK_MO1_UPHY_RX_CLK_SEL BIT(6 + 16) |
| #define UPHY_CONTROL3 0xc |
| #define MO1_UPHY_PLL_POWER_OFF_SEL BIT(7) |
| #define MASK_MO1_UPHY_PLL_POWER_OFF_SEL BIT(7 + 16) |
| #define MO1_UPHY_PLL_POWER_OFF BIT(3) |
| #define MASK_UPHY_PLL_POWER_OFF BIT(3 + 16) |
| |
| struct sp_usbphy { |
| struct device *dev; |
| struct resource *phy_res_mem; |
| struct resource *moon4_res_mem; |
| struct reset_control *rstc; |
| struct clk *phy_clk; |
| void __iomem *phy_regs; |
| void __iomem *moon4_regs; |
| u32 disc_vol_addr_off; |
| }; |
| |
| static int update_disc_vol(struct sp_usbphy *usbphy) |
| { |
| struct nvmem_cell *cell; |
| char *disc_name = "disc_vol"; |
| ssize_t otp_l = 0; |
| char *otp_v; |
| u32 val, set; |
| |
| cell = nvmem_cell_get(usbphy->dev, disc_name); |
| if (IS_ERR_OR_NULL(cell)) { |
| if (PTR_ERR(cell) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| } |
| |
| otp_v = nvmem_cell_read(cell, &otp_l); |
| nvmem_cell_put(cell); |
| |
| if (!IS_ERR(otp_v)) { |
| set = *(otp_v + 1); |
| set = (set << (sizeof(char) * 8)) | *otp_v; |
| set = (set >> usbphy->disc_vol_addr_off) & J_DISC; |
| } |
| |
| if (IS_ERR(otp_v) || set == 0) |
| set = OTP_DISC_LEVEL_DEFAULT; |
| |
| val = readl(usbphy->phy_regs + CONFIG7); |
| val = (val & ~J_DISC) | set; |
| writel(val, usbphy->phy_regs + CONFIG7); |
| |
| return 0; |
| } |
| |
| static int sp_uphy_init(struct phy *phy) |
| { |
| struct sp_usbphy *usbphy = phy_get_drvdata(phy); |
| u32 val; |
| int ret; |
| |
| ret = clk_prepare_enable(usbphy->phy_clk); |
| if (ret) |
| goto err_clk; |
| |
| ret = reset_control_deassert(usbphy->rstc); |
| if (ret) |
| goto err_reset; |
| |
| /* Default value modification */ |
| writel(HIGH_MASK_BITS | 0x4002, usbphy->moon4_regs + UPHY_CONTROL0); |
| writel(HIGH_MASK_BITS | 0x8747, usbphy->moon4_regs + UPHY_CONTROL1); |
| |
| /* disconnect voltage */ |
| ret = update_disc_vol(usbphy); |
| if (ret < 0) |
| return ret; |
| |
| /* board uphy 0 internal register modification for tid certification */ |
| val = readl(usbphy->phy_regs + CONFIG9); |
| val &= ~(J_ECO_PATH); |
| writel(val, usbphy->phy_regs + CONFIG9); |
| |
| val = readl(usbphy->phy_regs + CONFIG1); |
| val &= ~(J_HS_TX_PWRSAV); |
| writel(val, usbphy->phy_regs + CONFIG1); |
| |
| val = readl(usbphy->phy_regs + CONFIG23); |
| val = (val & ~PROB) | PROB; |
| writel(val, usbphy->phy_regs + CONFIG23); |
| |
| /* port 0 uphy clk fix */ |
| writel(MASK_MO1_UPHY_RX_CLK_SEL | MO1_UPHY_RX_CLK_SEL, |
| usbphy->moon4_regs + UPHY_CONTROL2); |
| |
| /* battery charger */ |
| writel(J_TBCWAIT_1P1_MS | J_TVDM_SRC_DIS_8P2_MS | J_TVDM_SRC_EN_1P6_MS | J_BC_EN, |
| usbphy->phy_regs + CONFIG16); |
| writel(IBG_TRIM0_SSLVHT | J_VDATREE_TRIM_DEFAULT, usbphy->phy_regs + CONFIG17); |
| |
| /* chirp mode */ |
| writel(J_FORCE_DISC_ON | J_DEBUG_CTRL_ADDR_MACRO, usbphy->phy_regs + CONFIG3); |
| |
| return 0; |
| |
| err_reset: |
| reset_control_assert(usbphy->rstc); |
| err_clk: |
| clk_disable_unprepare(usbphy->phy_clk); |
| |
| return ret; |
| } |
| |
| static int sp_uphy_power_on(struct phy *phy) |
| { |
| struct sp_usbphy *usbphy = phy_get_drvdata(phy); |
| u32 pll_pwr_on, pll_pwr_off; |
| |
| /* PLL power off/on twice */ |
| pll_pwr_off = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) |
| | MO1_UPHY_PLL_POWER_OFF_SEL | MO1_UPHY_PLL_POWER_OFF; |
| pll_pwr_on = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) |
| | MO1_UPHY_PLL_POWER_OFF_SEL; |
| |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| mdelay(1); |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_on, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| mdelay(1); |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| mdelay(1); |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_on, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| mdelay(1); |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | 0x0, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| |
| return 0; |
| } |
| |
| static int sp_uphy_power_off(struct phy *phy) |
| { |
| struct sp_usbphy *usbphy = phy_get_drvdata(phy); |
| u32 pll_pwr_off; |
| |
| pll_pwr_off = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) |
| | MO1_UPHY_PLL_POWER_OFF_SEL | MO1_UPHY_PLL_POWER_OFF; |
| |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| mdelay(1); |
| writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | 0x0, |
| usbphy->moon4_regs + UPHY_CONTROL3); |
| |
| return 0; |
| } |
| |
| static int sp_uphy_exit(struct phy *phy) |
| { |
| struct sp_usbphy *usbphy = phy_get_drvdata(phy); |
| |
| reset_control_assert(usbphy->rstc); |
| clk_disable_unprepare(usbphy->phy_clk); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops sp_uphy_ops = { |
| .init = sp_uphy_init, |
| .power_on = sp_uphy_power_on, |
| .power_off = sp_uphy_power_off, |
| .exit = sp_uphy_exit, |
| }; |
| |
| static const struct of_device_id sp_uphy_dt_ids[] = { |
| {.compatible = "sunplus,sp7021-usb2-phy", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sp_uphy_dt_ids); |
| |
| static int sp_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct sp_usbphy *usbphy; |
| struct phy_provider *phy_provider; |
| struct phy *phy; |
| int ret; |
| |
| usbphy = devm_kzalloc(&pdev->dev, sizeof(*usbphy), GFP_KERNEL); |
| if (!usbphy) |
| return -ENOMEM; |
| |
| usbphy->dev = &pdev->dev; |
| |
| usbphy->phy_res_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); |
| usbphy->phy_regs = devm_ioremap_resource(&pdev->dev, usbphy->phy_res_mem); |
| if (IS_ERR(usbphy->phy_regs)) |
| return PTR_ERR(usbphy->phy_regs); |
| |
| usbphy->moon4_res_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "moon4"); |
| if (!usbphy->moon4_res_mem) |
| return -EINVAL; |
| |
| usbphy->moon4_regs = devm_ioremap(&pdev->dev, usbphy->moon4_res_mem->start, |
| resource_size(usbphy->moon4_res_mem)); |
| if (!usbphy->moon4_regs) |
| return -ENOMEM; |
| |
| usbphy->phy_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(usbphy->phy_clk)) |
| return PTR_ERR(usbphy->phy_clk); |
| |
| usbphy->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); |
| if (IS_ERR(usbphy->rstc)) |
| return PTR_ERR(usbphy->rstc); |
| |
| of_property_read_u32(pdev->dev.of_node, "sunplus,disc-vol-addr-off", |
| &usbphy->disc_vol_addr_off); |
| |
| phy = devm_phy_create(&pdev->dev, NULL, &sp_uphy_ops); |
| if (IS_ERR(phy)) { |
| ret = -PTR_ERR(phy); |
| return ret; |
| } |
| |
| phy_set_drvdata(phy, usbphy); |
| phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver sunplus_usb_phy_driver = { |
| .probe = sp_usb_phy_probe, |
| .driver = { |
| .name = "sunplus-usb2-phy", |
| .of_match_table = sp_uphy_dt_ids, |
| }, |
| }; |
| module_platform_driver(sunplus_usb_phy_driver); |
| |
| MODULE_AUTHOR("Vincent Shih <vincent.shih@sunplus.com>"); |
| MODULE_DESCRIPTION("Sunplus USB 2.0 phy driver"); |
| MODULE_LICENSE("GPL"); |