| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * drivers/pwm/pwm-pxa.c |
| * |
| * simple driver for PWM (Pulse Width Modulator) controller |
| * |
| * 2008-02-13 initial version |
| * eric miao <eric.miao@marvell.com> |
| * |
| * Links to reference manuals for some of the supported PWM chips can be found |
| * in Documentation/arch/arm/marvell.rst. |
| * |
| * Limitations: |
| * - When PWM is stopped, the current PWM period stops abruptly at the next |
| * input clock (PWMCR_SD is set) and the output is driven to inactive. |
| */ |
| |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/pwm.h> |
| #include <linux/of_device.h> |
| |
| #include <asm/div64.h> |
| |
| #define HAS_SECONDARY_PWM 0x10 |
| |
| static const struct platform_device_id pwm_id_table[] = { |
| /* PWM has_secondary_pwm? */ |
| { "pxa25x-pwm", 0 }, |
| { "pxa27x-pwm", HAS_SECONDARY_PWM }, |
| { "pxa168-pwm", 0 }, |
| { "pxa910-pwm", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, pwm_id_table); |
| |
| /* PWM registers and bits definitions */ |
| #define PWMCR (0x00) |
| #define PWMDCR (0x04) |
| #define PWMPCR (0x08) |
| |
| #define PWMCR_SD (1 << 6) |
| #define PWMDCR_FD (1 << 10) |
| |
| struct pxa_pwm_chip { |
| struct pwm_chip chip; |
| struct device *dev; |
| |
| struct clk *clk; |
| void __iomem *mmio_base; |
| }; |
| |
| static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct pxa_pwm_chip, chip); |
| } |
| |
| /* |
| * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE |
| * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE |
| */ |
| static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| u64 duty_ns, u64 period_ns) |
| { |
| struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); |
| unsigned long long c; |
| unsigned long period_cycles, prescale, pv, dc; |
| unsigned long offset; |
| |
| offset = pwm->hwpwm ? 0x10 : 0; |
| |
| c = clk_get_rate(pc->clk); |
| c = c * period_ns; |
| do_div(c, 1000000000); |
| period_cycles = c; |
| |
| if (period_cycles < 1) |
| period_cycles = 1; |
| prescale = (period_cycles - 1) / 1024; |
| pv = period_cycles / (prescale + 1) - 1; |
| |
| if (prescale > 63) |
| return -EINVAL; |
| |
| if (duty_ns == period_ns) |
| dc = PWMDCR_FD; |
| else |
| dc = mul_u64_u64_div_u64(pv + 1, duty_ns, period_ns); |
| |
| writel(prescale | PWMCR_SD, pc->mmio_base + offset + PWMCR); |
| writel(dc, pc->mmio_base + offset + PWMDCR); |
| writel(pv, pc->mmio_base + offset + PWMPCR); |
| |
| return 0; |
| } |
| |
| static int pxa_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); |
| u64 duty_cycle; |
| int err; |
| |
| if (state->polarity != PWM_POLARITY_NORMAL) |
| return -EINVAL; |
| |
| err = clk_prepare_enable(pc->clk); |
| if (err) |
| return err; |
| |
| duty_cycle = state->enabled ? state->duty_cycle : 0; |
| |
| err = pxa_pwm_config(chip, pwm, duty_cycle, state->period); |
| if (err) { |
| clk_disable_unprepare(pc->clk); |
| return err; |
| } |
| |
| if (state->enabled && !pwm->state.enabled) |
| return 0; |
| |
| clk_disable_unprepare(pc->clk); |
| |
| if (!state->enabled && pwm->state.enabled) |
| clk_disable_unprepare(pc->clk); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops pxa_pwm_ops = { |
| .apply = pxa_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| #ifdef CONFIG_OF |
| /* |
| * Device tree users must create one device instance for each PWM channel. |
| * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver |
| * code that this is a single channel pxa25x-pwm. Currently all devices are |
| * supported identically. |
| */ |
| static const struct of_device_id pwm_of_match[] = { |
| { .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]}, |
| { .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]}, |
| { .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]}, |
| { .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pwm_of_match); |
| #else |
| #define pwm_of_match NULL |
| #endif |
| |
| static int pwm_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *id = platform_get_device_id(pdev); |
| struct pxa_pwm_chip *pc; |
| int ret = 0; |
| |
| if (IS_ENABLED(CONFIG_OF) && id == NULL) |
| id = of_device_get_match_data(&pdev->dev); |
| |
| if (id == NULL) |
| return -EINVAL; |
| |
| pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); |
| if (pc == NULL) |
| return -ENOMEM; |
| |
| pc->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pc->clk)) |
| return PTR_ERR(pc->clk); |
| |
| pc->chip.dev = &pdev->dev; |
| pc->chip.ops = &pxa_pwm_ops; |
| pc->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; |
| |
| if (IS_ENABLED(CONFIG_OF)) { |
| pc->chip.of_xlate = of_pwm_single_xlate; |
| pc->chip.of_pwm_n_cells = 1; |
| } |
| |
| pc->mmio_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pc->mmio_base)) |
| return PTR_ERR(pc->mmio_base); |
| |
| ret = devm_pwmchip_add(&pdev->dev, &pc->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver pwm_driver = { |
| .driver = { |
| .name = "pxa25x-pwm", |
| .of_match_table = pwm_of_match, |
| }, |
| .probe = pwm_probe, |
| .id_table = pwm_id_table, |
| }; |
| |
| module_platform_driver(pwm_driver); |
| |
| MODULE_LICENSE("GPL v2"); |