| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PWM device driver for SUNPLUS SP7021 SoC |
| * |
| * Links: |
| * Reference Manual: |
| * https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview |
| * |
| * Reference Manual(PWM module): |
| * https://sunplus.atlassian.net/wiki/spaces/doc/pages/461144198/12.+Pulse+Width+Modulation+PWM |
| * |
| * Limitations: |
| * - Only supports normal polarity. |
| * - It output low when PWM channel disabled. |
| * - When the parameters change, current running period will not be completed |
| * and run new settings immediately. |
| * - In .apply() PWM output need to write register FREQ and DUTY. When first write FREQ |
| * done and not yet write DUTY, it has short timing gap use new FREQ and old DUTY. |
| * |
| * Author: Hammer Hsieh <hammerh0314@gmail.com> |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| #define SP7021_PWM_MODE0 0x000 |
| #define SP7021_PWM_MODE0_PWMEN(ch) BIT(ch) |
| #define SP7021_PWM_MODE0_BYPASS(ch) BIT(8 + (ch)) |
| #define SP7021_PWM_MODE1 0x004 |
| #define SP7021_PWM_MODE1_CNT_EN(ch) BIT(ch) |
| #define SP7021_PWM_FREQ(ch) (0x008 + 4 * (ch)) |
| #define SP7021_PWM_FREQ_MAX GENMASK(15, 0) |
| #define SP7021_PWM_DUTY(ch) (0x018 + 4 * (ch)) |
| #define SP7021_PWM_DUTY_DD_SEL(ch) FIELD_PREP(GENMASK(9, 8), ch) |
| #define SP7021_PWM_DUTY_MAX GENMASK(7, 0) |
| #define SP7021_PWM_DUTY_MASK SP7021_PWM_DUTY_MAX |
| #define SP7021_PWM_FREQ_SCALER 256 |
| #define SP7021_PWM_NUM 4 |
| |
| struct sunplus_pwm { |
| struct pwm_chip chip; |
| void __iomem *base; |
| struct clk *clk; |
| }; |
| |
| static inline struct sunplus_pwm *to_sunplus_pwm(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct sunplus_pwm, chip); |
| } |
| |
| static int sunplus_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct sunplus_pwm *priv = to_sunplus_pwm(chip); |
| u32 dd_freq, duty, mode0, mode1; |
| u64 clk_rate; |
| |
| if (state->polarity != pwm->state.polarity) |
| return -EINVAL; |
| |
| if (!state->enabled) { |
| /* disable pwm channel output */ |
| mode0 = readl(priv->base + SP7021_PWM_MODE0); |
| mode0 &= ~SP7021_PWM_MODE0_PWMEN(pwm->hwpwm); |
| writel(mode0, priv->base + SP7021_PWM_MODE0); |
| /* disable pwm channel clk source */ |
| mode1 = readl(priv->base + SP7021_PWM_MODE1); |
| mode1 &= ~SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm); |
| writel(mode1, priv->base + SP7021_PWM_MODE1); |
| return 0; |
| } |
| |
| clk_rate = clk_get_rate(priv->clk); |
| |
| /* |
| * The following calculations might overflow if clk is bigger |
| * than 256 GHz. In practise it's 202.5MHz, so this limitation |
| * is only theoretic. |
| */ |
| if (clk_rate > (u64)SP7021_PWM_FREQ_SCALER * NSEC_PER_SEC) |
| return -EINVAL; |
| |
| /* |
| * With clk_rate limited above we have dd_freq <= state->period, |
| * so this cannot overflow. |
| */ |
| dd_freq = mul_u64_u64_div_u64(clk_rate, state->period, (u64)SP7021_PWM_FREQ_SCALER |
| * NSEC_PER_SEC); |
| |
| if (dd_freq == 0) |
| return -EINVAL; |
| |
| if (dd_freq > SP7021_PWM_FREQ_MAX) |
| dd_freq = SP7021_PWM_FREQ_MAX; |
| |
| writel(dd_freq, priv->base + SP7021_PWM_FREQ(pwm->hwpwm)); |
| |
| /* cal and set pwm duty */ |
| mode0 = readl(priv->base + SP7021_PWM_MODE0); |
| mode0 |= SP7021_PWM_MODE0_PWMEN(pwm->hwpwm); |
| mode1 = readl(priv->base + SP7021_PWM_MODE1); |
| mode1 |= SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm); |
| if (state->duty_cycle == state->period) { |
| /* PWM channel output = high */ |
| mode0 |= SP7021_PWM_MODE0_BYPASS(pwm->hwpwm); |
| duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | SP7021_PWM_DUTY_MAX; |
| } else { |
| mode0 &= ~SP7021_PWM_MODE0_BYPASS(pwm->hwpwm); |
| /* |
| * duty_ns <= period_ns 27 bits, clk_rate 28 bits, won't overflow. |
| */ |
| duty = mul_u64_u64_div_u64(state->duty_cycle, clk_rate, |
| (u64)dd_freq * NSEC_PER_SEC); |
| duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | duty; |
| } |
| writel(duty, priv->base + SP7021_PWM_DUTY(pwm->hwpwm)); |
| writel(mode1, priv->base + SP7021_PWM_MODE1); |
| writel(mode0, priv->base + SP7021_PWM_MODE0); |
| |
| return 0; |
| } |
| |
| static int sunplus_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct sunplus_pwm *priv = to_sunplus_pwm(chip); |
| u32 mode0, dd_freq, duty; |
| u64 clk_rate; |
| |
| mode0 = readl(priv->base + SP7021_PWM_MODE0); |
| |
| if (mode0 & BIT(pwm->hwpwm)) { |
| clk_rate = clk_get_rate(priv->clk); |
| dd_freq = readl(priv->base + SP7021_PWM_FREQ(pwm->hwpwm)); |
| duty = readl(priv->base + SP7021_PWM_DUTY(pwm->hwpwm)); |
| duty = FIELD_GET(SP7021_PWM_DUTY_MASK, duty); |
| /* |
| * dd_freq 16 bits, SP7021_PWM_FREQ_SCALER 8 bits |
| * NSEC_PER_SEC 30 bits, won't overflow. |
| */ |
| state->period = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)SP7021_PWM_FREQ_SCALER |
| * NSEC_PER_SEC, clk_rate); |
| /* |
| * dd_freq 16 bits, duty 8 bits, NSEC_PER_SEC 30 bits, won't overflow. |
| */ |
| state->duty_cycle = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)duty * NSEC_PER_SEC, |
| clk_rate); |
| state->enabled = true; |
| } else { |
| state->enabled = false; |
| } |
| |
| state->polarity = PWM_POLARITY_NORMAL; |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops sunplus_pwm_ops = { |
| .apply = sunplus_pwm_apply, |
| .get_state = sunplus_pwm_get_state, |
| .owner = THIS_MODULE, |
| }; |
| |
| static void sunplus_pwm_clk_release(void *data) |
| { |
| struct clk *clk = data; |
| |
| clk_disable_unprepare(clk); |
| } |
| |
| static int sunplus_pwm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct sunplus_pwm *priv; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| priv->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(priv->clk)) |
| return dev_err_probe(dev, PTR_ERR(priv->clk), |
| "get pwm clock failed\n"); |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable clock: %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(dev, sunplus_pwm_clk_release, priv->clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to release clock: %d\n", ret); |
| return ret; |
| } |
| |
| priv->chip.dev = dev; |
| priv->chip.ops = &sunplus_pwm_ops; |
| priv->chip.npwm = SP7021_PWM_NUM; |
| |
| ret = devm_pwmchip_add(dev, &priv->chip); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "Cannot register sunplus PWM\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sunplus_pwm_of_match[] = { |
| { .compatible = "sunplus,sp7021-pwm", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, sunplus_pwm_of_match); |
| |
| static struct platform_driver sunplus_pwm_driver = { |
| .probe = sunplus_pwm_probe, |
| .driver = { |
| .name = "sunplus-pwm", |
| .of_match_table = sunplus_pwm_of_match, |
| }, |
| }; |
| module_platform_driver(sunplus_pwm_driver); |
| |
| MODULE_DESCRIPTION("Sunplus SoC PWM Driver"); |
| MODULE_AUTHOR("Hammer Hsieh <hammerh0314@gmail.com>"); |
| MODULE_LICENSE("GPL"); |