| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| /* |
| * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content |
| * |
| * Copyright (c) 2002-2017 Volkswagen Group Electronic Research |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of Volkswagen nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * Alternatively, provided that this notice is retained in full, this |
| * software may be distributed under the terms of the GNU General |
| * Public License ("GPL") version 2, in which case the provisions of the |
| * GPL apply INSTEAD OF those given above. |
| * |
| * The provided data structures and external interfaces from this code |
| * are not restricted to be used by modules with a GPL compatible license. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/hrtimer.h> |
| #include <linux/list.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/uio.h> |
| #include <linux/net.h> |
| #include <linux/netdevice.h> |
| #include <linux/socket.h> |
| #include <linux/if_arp.h> |
| #include <linux/skbuff.h> |
| #include <linux/can.h> |
| #include <linux/can/core.h> |
| #include <linux/can/skb.h> |
| #include <linux/can/bcm.h> |
| #include <linux/slab.h> |
| #include <net/sock.h> |
| #include <net/net_namespace.h> |
| |
| /* |
| * To send multiple CAN frame content within TX_SETUP or to filter |
| * CAN messages with multiplex index within RX_SETUP, the number of |
| * different filters is limited to 256 due to the one byte index value. |
| */ |
| #define MAX_NFRAMES 256 |
| |
| /* limit timers to 400 days for sending/timeouts */ |
| #define BCM_TIMER_SEC_MAX (400 * 24 * 60 * 60) |
| |
| /* use of last_frames[index].flags */ |
| #define RX_RECV 0x40 /* received data for this element */ |
| #define RX_THR 0x80 /* element not been sent due to throttle feature */ |
| #define BCM_CAN_FLAGS_MASK 0x3F /* to clean private flags after usage */ |
| |
| /* get best masking value for can_rx_register() for a given single can_id */ |
| #define REGMASK(id) ((id & CAN_EFF_FLAG) ? \ |
| (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \ |
| (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG)) |
| |
| MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); |
| MODULE_ALIAS("can-proto-2"); |
| |
| #define BCM_MIN_NAMELEN CAN_REQUIRED_SIZE(struct sockaddr_can, can_ifindex) |
| |
| /* |
| * easy access to the first 64 bit of can(fd)_frame payload. cp->data is |
| * 64 bit aligned so the offset has to be multiples of 8 which is ensured |
| * by the only callers in bcm_rx_cmp_to_index() bcm_rx_handler(). |
| */ |
| static inline u64 get_u64(const struct canfd_frame *cp, int offset) |
| { |
| return *(u64 *)(cp->data + offset); |
| } |
| |
| struct bcm_op { |
| struct list_head list; |
| struct rcu_head rcu; |
| int ifindex; |
| canid_t can_id; |
| u32 flags; |
| unsigned long frames_abs, frames_filtered; |
| struct bcm_timeval ival1, ival2; |
| struct hrtimer timer, thrtimer; |
| ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg; |
| int rx_ifindex; |
| int cfsiz; |
| u32 count; |
| u32 nframes; |
| u32 currframe; |
| /* void pointers to arrays of struct can[fd]_frame */ |
| void *frames; |
| void *last_frames; |
| struct canfd_frame sframe; |
| struct canfd_frame last_sframe; |
| struct sock *sk; |
| struct net_device *rx_reg_dev; |
| }; |
| |
| struct bcm_sock { |
| struct sock sk; |
| int bound; |
| int ifindex; |
| struct list_head notifier; |
| struct list_head rx_ops; |
| struct list_head tx_ops; |
| unsigned long dropped_usr_msgs; |
| struct proc_dir_entry *bcm_proc_read; |
| char procname [32]; /* inode number in decimal with \0 */ |
| }; |
| |
| static LIST_HEAD(bcm_notifier_list); |
| static DEFINE_SPINLOCK(bcm_notifier_lock); |
| static struct bcm_sock *bcm_busy_notifier; |
| |
| static inline struct bcm_sock *bcm_sk(const struct sock *sk) |
| { |
| return (struct bcm_sock *)sk; |
| } |
| |
| static inline ktime_t bcm_timeval_to_ktime(struct bcm_timeval tv) |
| { |
| return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC); |
| } |
| |
| /* check limitations for timeval provided by user */ |
| static bool bcm_is_invalid_tv(struct bcm_msg_head *msg_head) |
| { |
| if ((msg_head->ival1.tv_sec < 0) || |
| (msg_head->ival1.tv_sec > BCM_TIMER_SEC_MAX) || |
| (msg_head->ival1.tv_usec < 0) || |
| (msg_head->ival1.tv_usec >= USEC_PER_SEC) || |
| (msg_head->ival2.tv_sec < 0) || |
| (msg_head->ival2.tv_sec > BCM_TIMER_SEC_MAX) || |
| (msg_head->ival2.tv_usec < 0) || |
| (msg_head->ival2.tv_usec >= USEC_PER_SEC)) |
| return true; |
| |
| return false; |
| } |
| |
| #define CFSIZ(flags) ((flags & CAN_FD_FRAME) ? CANFD_MTU : CAN_MTU) |
| #define OPSIZ sizeof(struct bcm_op) |
| #define MHSIZ sizeof(struct bcm_msg_head) |
| |
| /* |
| * procfs functions |
| */ |
| #if IS_ENABLED(CONFIG_PROC_FS) |
| static char *bcm_proc_getifname(struct net *net, char *result, int ifindex) |
| { |
| struct net_device *dev; |
| |
| if (!ifindex) |
| return "any"; |
| |
| rcu_read_lock(); |
| dev = dev_get_by_index_rcu(net, ifindex); |
| if (dev) |
| strcpy(result, dev->name); |
| else |
| strcpy(result, "???"); |
| rcu_read_unlock(); |
| |
| return result; |
| } |
| |
| static int bcm_proc_show(struct seq_file *m, void *v) |
| { |
| char ifname[IFNAMSIZ]; |
| struct net *net = m->private; |
| struct sock *sk = (struct sock *)pde_data(m->file->f_inode); |
| struct bcm_sock *bo = bcm_sk(sk); |
| struct bcm_op *op; |
| |
| seq_printf(m, ">>> socket %pK", sk->sk_socket); |
| seq_printf(m, " / sk %pK", sk); |
| seq_printf(m, " / bo %pK", bo); |
| seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs); |
| seq_printf(m, " / bound %s", bcm_proc_getifname(net, ifname, bo->ifindex)); |
| seq_printf(m, " <<<\n"); |
| |
| list_for_each_entry(op, &bo->rx_ops, list) { |
| |
| unsigned long reduction; |
| |
| /* print only active entries & prevent division by zero */ |
| if (!op->frames_abs) |
| continue; |
| |
| seq_printf(m, "rx_op: %03X %-5s ", op->can_id, |
| bcm_proc_getifname(net, ifname, op->ifindex)); |
| |
| if (op->flags & CAN_FD_FRAME) |
| seq_printf(m, "(%u)", op->nframes); |
| else |
| seq_printf(m, "[%u]", op->nframes); |
| |
| seq_printf(m, "%c ", (op->flags & RX_CHECK_DLC) ? 'd' : ' '); |
| |
| if (op->kt_ival1) |
| seq_printf(m, "timeo=%lld ", |
| (long long)ktime_to_us(op->kt_ival1)); |
| |
| if (op->kt_ival2) |
| seq_printf(m, "thr=%lld ", |
| (long long)ktime_to_us(op->kt_ival2)); |
| |
| seq_printf(m, "# recv %ld (%ld) => reduction: ", |
| op->frames_filtered, op->frames_abs); |
| |
| reduction = 100 - (op->frames_filtered * 100) / op->frames_abs; |
| |
| seq_printf(m, "%s%ld%%\n", |
| (reduction == 100) ? "near " : "", reduction); |
| } |
| |
| list_for_each_entry(op, &bo->tx_ops, list) { |
| |
| seq_printf(m, "tx_op: %03X %s ", op->can_id, |
| bcm_proc_getifname(net, ifname, op->ifindex)); |
| |
| if (op->flags & CAN_FD_FRAME) |
| seq_printf(m, "(%u) ", op->nframes); |
| else |
| seq_printf(m, "[%u] ", op->nframes); |
| |
| if (op->kt_ival1) |
| seq_printf(m, "t1=%lld ", |
| (long long)ktime_to_us(op->kt_ival1)); |
| |
| if (op->kt_ival2) |
| seq_printf(m, "t2=%lld ", |
| (long long)ktime_to_us(op->kt_ival2)); |
| |
| seq_printf(m, "# sent %ld\n", op->frames_abs); |
| } |
| seq_putc(m, '\n'); |
| return 0; |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface |
| * of the given bcm tx op |
| */ |
| static void bcm_can_tx(struct bcm_op *op) |
| { |
| struct sk_buff *skb; |
| struct net_device *dev; |
| struct canfd_frame *cf = op->frames + op->cfsiz * op->currframe; |
| int err; |
| |
| /* no target device? => exit */ |
| if (!op->ifindex) |
| return; |
| |
| dev = dev_get_by_index(sock_net(op->sk), op->ifindex); |
| if (!dev) { |
| /* RFC: should this bcm_op remove itself here? */ |
| return; |
| } |
| |
| skb = alloc_skb(op->cfsiz + sizeof(struct can_skb_priv), gfp_any()); |
| if (!skb) |
| goto out; |
| |
| can_skb_reserve(skb); |
| can_skb_prv(skb)->ifindex = dev->ifindex; |
| can_skb_prv(skb)->skbcnt = 0; |
| |
| skb_put_data(skb, cf, op->cfsiz); |
| |
| /* send with loopback */ |
| skb->dev = dev; |
| can_skb_set_owner(skb, op->sk); |
| err = can_send(skb, 1); |
| if (!err) |
| op->frames_abs++; |
| |
| op->currframe++; |
| |
| /* reached last frame? */ |
| if (op->currframe >= op->nframes) |
| op->currframe = 0; |
| out: |
| dev_put(dev); |
| } |
| |
| /* |
| * bcm_send_to_user - send a BCM message to the userspace |
| * (consisting of bcm_msg_head + x CAN frames) |
| */ |
| static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, |
| struct canfd_frame *frames, int has_timestamp) |
| { |
| struct sk_buff *skb; |
| struct canfd_frame *firstframe; |
| struct sockaddr_can *addr; |
| struct sock *sk = op->sk; |
| unsigned int datalen = head->nframes * op->cfsiz; |
| int err; |
| |
| skb = alloc_skb(sizeof(*head) + datalen, gfp_any()); |
| if (!skb) |
| return; |
| |
| skb_put_data(skb, head, sizeof(*head)); |
| |
| if (head->nframes) { |
| /* CAN frames starting here */ |
| firstframe = (struct canfd_frame *)skb_tail_pointer(skb); |
| |
| skb_put_data(skb, frames, datalen); |
| |
| /* |
| * the BCM uses the flags-element of the canfd_frame |
| * structure for internal purposes. This is only |
| * relevant for updates that are generated by the |
| * BCM, where nframes is 1 |
| */ |
| if (head->nframes == 1) |
| firstframe->flags &= BCM_CAN_FLAGS_MASK; |
| } |
| |
| if (has_timestamp) { |
| /* restore rx timestamp */ |
| skb->tstamp = op->rx_stamp; |
| } |
| |
| /* |
| * Put the datagram to the queue so that bcm_recvmsg() can |
| * get it from there. We need to pass the interface index to |
| * bcm_recvmsg(). We pass a whole struct sockaddr_can in skb->cb |
| * containing the interface index. |
| */ |
| |
| sock_skb_cb_check_size(sizeof(struct sockaddr_can)); |
| addr = (struct sockaddr_can *)skb->cb; |
| memset(addr, 0, sizeof(*addr)); |
| addr->can_family = AF_CAN; |
| addr->can_ifindex = op->rx_ifindex; |
| |
| err = sock_queue_rcv_skb(sk, skb); |
| if (err < 0) { |
| struct bcm_sock *bo = bcm_sk(sk); |
| |
| kfree_skb(skb); |
| /* don't care about overflows in this statistic */ |
| bo->dropped_usr_msgs++; |
| } |
| } |
| |
| static bool bcm_tx_set_expiry(struct bcm_op *op, struct hrtimer *hrt) |
| { |
| ktime_t ival; |
| |
| if (op->kt_ival1 && op->count) |
| ival = op->kt_ival1; |
| else if (op->kt_ival2) |
| ival = op->kt_ival2; |
| else |
| return false; |
| |
| hrtimer_set_expires(hrt, ktime_add(ktime_get(), ival)); |
| return true; |
| } |
| |
| static void bcm_tx_start_timer(struct bcm_op *op) |
| { |
| if (bcm_tx_set_expiry(op, &op->timer)) |
| hrtimer_start_expires(&op->timer, HRTIMER_MODE_ABS_SOFT); |
| } |
| |
| /* bcm_tx_timeout_handler - performs cyclic CAN frame transmissions */ |
| static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer) |
| { |
| struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); |
| struct bcm_msg_head msg_head; |
| |
| if (op->kt_ival1 && (op->count > 0)) { |
| op->count--; |
| if (!op->count && (op->flags & TX_COUNTEVT)) { |
| |
| /* create notification to user */ |
| memset(&msg_head, 0, sizeof(msg_head)); |
| msg_head.opcode = TX_EXPIRED; |
| msg_head.flags = op->flags; |
| msg_head.count = op->count; |
| msg_head.ival1 = op->ival1; |
| msg_head.ival2 = op->ival2; |
| msg_head.can_id = op->can_id; |
| msg_head.nframes = 0; |
| |
| bcm_send_to_user(op, &msg_head, NULL, 0); |
| } |
| bcm_can_tx(op); |
| |
| } else if (op->kt_ival2) { |
| bcm_can_tx(op); |
| } |
| |
| return bcm_tx_set_expiry(op, &op->timer) ? |
| HRTIMER_RESTART : HRTIMER_NORESTART; |
| } |
| |
| /* |
| * bcm_rx_changed - create a RX_CHANGED notification due to changed content |
| */ |
| static void bcm_rx_changed(struct bcm_op *op, struct canfd_frame *data) |
| { |
| struct bcm_msg_head head; |
| |
| /* update statistics */ |
| op->frames_filtered++; |
| |
| /* prevent statistics overflow */ |
| if (op->frames_filtered > ULONG_MAX/100) |
| op->frames_filtered = op->frames_abs = 0; |
| |
| /* this element is not throttled anymore */ |
| data->flags &= (BCM_CAN_FLAGS_MASK|RX_RECV); |
| |
| memset(&head, 0, sizeof(head)); |
| head.opcode = RX_CHANGED; |
| head.flags = op->flags; |
| head.count = op->count; |
| head.ival1 = op->ival1; |
| head.ival2 = op->ival2; |
| head.can_id = op->can_id; |
| head.nframes = 1; |
| |
| bcm_send_to_user(op, &head, data, 1); |
| } |
| |
| /* |
| * bcm_rx_update_and_send - process a detected relevant receive content change |
| * 1. update the last received data |
| * 2. send a notification to the user (if possible) |
| */ |
| static void bcm_rx_update_and_send(struct bcm_op *op, |
| struct canfd_frame *lastdata, |
| const struct canfd_frame *rxdata) |
| { |
| memcpy(lastdata, rxdata, op->cfsiz); |
| |
| /* mark as used and throttled by default */ |
| lastdata->flags |= (RX_RECV|RX_THR); |
| |
| /* throttling mode inactive ? */ |
| if (!op->kt_ival2) { |
| /* send RX_CHANGED to the user immediately */ |
| bcm_rx_changed(op, lastdata); |
| return; |
| } |
| |
| /* with active throttling timer we are just done here */ |
| if (hrtimer_active(&op->thrtimer)) |
| return; |
| |
| /* first reception with enabled throttling mode */ |
| if (!op->kt_lastmsg) |
| goto rx_changed_settime; |
| |
| /* got a second frame inside a potential throttle period? */ |
| if (ktime_us_delta(ktime_get(), op->kt_lastmsg) < |
| ktime_to_us(op->kt_ival2)) { |
| /* do not send the saved data - only start throttle timer */ |
| hrtimer_start(&op->thrtimer, |
| ktime_add(op->kt_lastmsg, op->kt_ival2), |
| HRTIMER_MODE_ABS_SOFT); |
| return; |
| } |
| |
| /* the gap was that big, that throttling was not needed here */ |
| rx_changed_settime: |
| bcm_rx_changed(op, lastdata); |
| op->kt_lastmsg = ktime_get(); |
| } |
| |
| /* |
| * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly |
| * received data stored in op->last_frames[] |
| */ |
| static void bcm_rx_cmp_to_index(struct bcm_op *op, unsigned int index, |
| const struct canfd_frame *rxdata) |
| { |
| struct canfd_frame *cf = op->frames + op->cfsiz * index; |
| struct canfd_frame *lcf = op->last_frames + op->cfsiz * index; |
| int i; |
| |
| /* |
| * no one uses the MSBs of flags for comparison, |
| * so we use it here to detect the first time of reception |
| */ |
| |
| if (!(lcf->flags & RX_RECV)) { |
| /* received data for the first time => send update to user */ |
| bcm_rx_update_and_send(op, lcf, rxdata); |
| return; |
| } |
| |
| /* do a real check in CAN frame data section */ |
| for (i = 0; i < rxdata->len; i += 8) { |
| if ((get_u64(cf, i) & get_u64(rxdata, i)) != |
| (get_u64(cf, i) & get_u64(lcf, i))) { |
| bcm_rx_update_and_send(op, lcf, rxdata); |
| return; |
| } |
| } |
| |
| if (op->flags & RX_CHECK_DLC) { |
| /* do a real check in CAN frame length */ |
| if (rxdata->len != lcf->len) { |
| bcm_rx_update_and_send(op, lcf, rxdata); |
| return; |
| } |
| } |
| } |
| |
| /* |
| * bcm_rx_starttimer - enable timeout monitoring for CAN frame reception |
| */ |
| static void bcm_rx_starttimer(struct bcm_op *op) |
| { |
| if (op->flags & RX_NO_AUTOTIMER) |
| return; |
| |
| if (op->kt_ival1) |
| hrtimer_start(&op->timer, op->kt_ival1, HRTIMER_MODE_REL_SOFT); |
| } |
| |
| /* bcm_rx_timeout_handler - when the (cyclic) CAN frame reception timed out */ |
| static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer) |
| { |
| struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); |
| struct bcm_msg_head msg_head; |
| |
| /* if user wants to be informed, when cyclic CAN-Messages come back */ |
| if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) { |
| /* clear received CAN frames to indicate 'nothing received' */ |
| memset(op->last_frames, 0, op->nframes * op->cfsiz); |
| } |
| |
| /* create notification to user */ |
| memset(&msg_head, 0, sizeof(msg_head)); |
| msg_head.opcode = RX_TIMEOUT; |
| msg_head.flags = op->flags; |
| msg_head.count = op->count; |
| msg_head.ival1 = op->ival1; |
| msg_head.ival2 = op->ival2; |
| msg_head.can_id = op->can_id; |
| msg_head.nframes = 0; |
| |
| bcm_send_to_user(op, &msg_head, NULL, 0); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| /* |
| * bcm_rx_do_flush - helper for bcm_rx_thr_flush |
| */ |
| static inline int bcm_rx_do_flush(struct bcm_op *op, unsigned int index) |
| { |
| struct canfd_frame *lcf = op->last_frames + op->cfsiz * index; |
| |
| if ((op->last_frames) && (lcf->flags & RX_THR)) { |
| bcm_rx_changed(op, lcf); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * bcm_rx_thr_flush - Check for throttled data and send it to the userspace |
| */ |
| static int bcm_rx_thr_flush(struct bcm_op *op) |
| { |
| int updated = 0; |
| |
| if (op->nframes > 1) { |
| unsigned int i; |
| |
| /* for MUX filter we start at index 1 */ |
| for (i = 1; i < op->nframes; i++) |
| updated += bcm_rx_do_flush(op, i); |
| |
| } else { |
| /* for RX_FILTER_ID and simple filter */ |
| updated += bcm_rx_do_flush(op, 0); |
| } |
| |
| return updated; |
| } |
| |
| /* |
| * bcm_rx_thr_handler - the time for blocked content updates is over now: |
| * Check for throttled data and send it to the userspace |
| */ |
| static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer) |
| { |
| struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer); |
| |
| if (bcm_rx_thr_flush(op)) { |
| hrtimer_forward_now(hrtimer, op->kt_ival2); |
| return HRTIMER_RESTART; |
| } else { |
| /* rearm throttle handling */ |
| op->kt_lastmsg = 0; |
| return HRTIMER_NORESTART; |
| } |
| } |
| |
| /* |
| * bcm_rx_handler - handle a CAN frame reception |
| */ |
| static void bcm_rx_handler(struct sk_buff *skb, void *data) |
| { |
| struct bcm_op *op = (struct bcm_op *)data; |
| const struct canfd_frame *rxframe = (struct canfd_frame *)skb->data; |
| unsigned int i; |
| |
| if (op->can_id != rxframe->can_id) |
| return; |
| |
| /* make sure to handle the correct frame type (CAN / CAN FD) */ |
| if (op->flags & CAN_FD_FRAME) { |
| if (!can_is_canfd_skb(skb)) |
| return; |
| } else { |
| if (!can_is_can_skb(skb)) |
| return; |
| } |
| |
| /* disable timeout */ |
| hrtimer_cancel(&op->timer); |
| |
| /* save rx timestamp */ |
| op->rx_stamp = skb->tstamp; |
| /* save originator for recvfrom() */ |
| op->rx_ifindex = skb->dev->ifindex; |
| /* update statistics */ |
| op->frames_abs++; |
| |
| if (op->flags & RX_RTR_FRAME) { |
| /* send reply for RTR-request (placed in op->frames[0]) */ |
| bcm_can_tx(op); |
| return; |
| } |
| |
| if (op->flags & RX_FILTER_ID) { |
| /* the easiest case */ |
| bcm_rx_update_and_send(op, op->last_frames, rxframe); |
| goto rx_starttimer; |
| } |
| |
| if (op->nframes == 1) { |
| /* simple compare with index 0 */ |
| bcm_rx_cmp_to_index(op, 0, rxframe); |
| goto rx_starttimer; |
| } |
| |
| if (op->nframes > 1) { |
| /* |
| * multiplex compare |
| * |
| * find the first multiplex mask that fits. |
| * Remark: The MUX-mask is stored in index 0 - but only the |
| * first 64 bits of the frame data[] are relevant (CAN FD) |
| */ |
| |
| for (i = 1; i < op->nframes; i++) { |
| if ((get_u64(op->frames, 0) & get_u64(rxframe, 0)) == |
| (get_u64(op->frames, 0) & |
| get_u64(op->frames + op->cfsiz * i, 0))) { |
| bcm_rx_cmp_to_index(op, i, rxframe); |
| break; |
| } |
| } |
| } |
| |
| rx_starttimer: |
| bcm_rx_starttimer(op); |
| } |
| |
| /* |
| * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements |
| */ |
| static struct bcm_op *bcm_find_op(struct list_head *ops, |
| struct bcm_msg_head *mh, int ifindex) |
| { |
| struct bcm_op *op; |
| |
| list_for_each_entry(op, ops, list) { |
| if ((op->can_id == mh->can_id) && (op->ifindex == ifindex) && |
| (op->flags & CAN_FD_FRAME) == (mh->flags & CAN_FD_FRAME)) |
| return op; |
| } |
| |
| return NULL; |
| } |
| |
| static void bcm_free_op_rcu(struct rcu_head *rcu_head) |
| { |
| struct bcm_op *op = container_of(rcu_head, struct bcm_op, rcu); |
| |
| if ((op->frames) && (op->frames != &op->sframe)) |
| kfree(op->frames); |
| |
| if ((op->last_frames) && (op->last_frames != &op->last_sframe)) |
| kfree(op->last_frames); |
| |
| kfree(op); |
| } |
| |
| static void bcm_remove_op(struct bcm_op *op) |
| { |
| hrtimer_cancel(&op->timer); |
| hrtimer_cancel(&op->thrtimer); |
| |
| call_rcu(&op->rcu, bcm_free_op_rcu); |
| } |
| |
| static void bcm_rx_unreg(struct net_device *dev, struct bcm_op *op) |
| { |
| if (op->rx_reg_dev == dev) { |
| can_rx_unregister(dev_net(dev), dev, op->can_id, |
| REGMASK(op->can_id), bcm_rx_handler, op); |
| |
| /* mark as removed subscription */ |
| op->rx_reg_dev = NULL; |
| } else |
| printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device " |
| "mismatch %p %p\n", op->rx_reg_dev, dev); |
| } |
| |
| /* |
| * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops) |
| */ |
| static int bcm_delete_rx_op(struct list_head *ops, struct bcm_msg_head *mh, |
| int ifindex) |
| { |
| struct bcm_op *op, *n; |
| |
| list_for_each_entry_safe(op, n, ops, list) { |
| if ((op->can_id == mh->can_id) && (op->ifindex == ifindex) && |
| (op->flags & CAN_FD_FRAME) == (mh->flags & CAN_FD_FRAME)) { |
| |
| /* disable automatic timer on frame reception */ |
| op->flags |= RX_NO_AUTOTIMER; |
| |
| /* |
| * Don't care if we're bound or not (due to netdev |
| * problems) can_rx_unregister() is always a save |
| * thing to do here. |
| */ |
| if (op->ifindex) { |
| /* |
| * Only remove subscriptions that had not |
| * been removed due to NETDEV_UNREGISTER |
| * in bcm_notifier() |
| */ |
| if (op->rx_reg_dev) { |
| struct net_device *dev; |
| |
| dev = dev_get_by_index(sock_net(op->sk), |
| op->ifindex); |
| if (dev) { |
| bcm_rx_unreg(dev, op); |
| dev_put(dev); |
| } |
| } |
| } else |
| can_rx_unregister(sock_net(op->sk), NULL, |
| op->can_id, |
| REGMASK(op->can_id), |
| bcm_rx_handler, op); |
| |
| list_del(&op->list); |
| bcm_remove_op(op); |
| return 1; /* done */ |
| } |
| } |
| |
| return 0; /* not found */ |
| } |
| |
| /* |
| * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops) |
| */ |
| static int bcm_delete_tx_op(struct list_head *ops, struct bcm_msg_head *mh, |
| int ifindex) |
| { |
| struct bcm_op *op, *n; |
| |
| list_for_each_entry_safe(op, n, ops, list) { |
| if ((op->can_id == mh->can_id) && (op->ifindex == ifindex) && |
| (op->flags & CAN_FD_FRAME) == (mh->flags & CAN_FD_FRAME)) { |
| list_del(&op->list); |
| bcm_remove_op(op); |
| return 1; /* done */ |
| } |
| } |
| |
| return 0; /* not found */ |
| } |
| |
| /* |
| * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg) |
| */ |
| static int bcm_read_op(struct list_head *ops, struct bcm_msg_head *msg_head, |
| int ifindex) |
| { |
| struct bcm_op *op = bcm_find_op(ops, msg_head, ifindex); |
| |
| if (!op) |
| return -EINVAL; |
| |
| /* put current values into msg_head */ |
| msg_head->flags = op->flags; |
| msg_head->count = op->count; |
| msg_head->ival1 = op->ival1; |
| msg_head->ival2 = op->ival2; |
| msg_head->nframes = op->nframes; |
| |
| bcm_send_to_user(op, msg_head, op->frames, 0); |
| |
| return MHSIZ; |
| } |
| |
| /* |
| * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg) |
| */ |
| static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, |
| int ifindex, struct sock *sk) |
| { |
| struct bcm_sock *bo = bcm_sk(sk); |
| struct bcm_op *op; |
| struct canfd_frame *cf; |
| unsigned int i; |
| int err; |
| |
| /* we need a real device to send frames */ |
| if (!ifindex) |
| return -ENODEV; |
| |
| /* check nframes boundaries - we need at least one CAN frame */ |
| if (msg_head->nframes < 1 || msg_head->nframes > MAX_NFRAMES) |
| return -EINVAL; |
| |
| /* check timeval limitations */ |
| if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head)) |
| return -EINVAL; |
| |
| /* check the given can_id */ |
| op = bcm_find_op(&bo->tx_ops, msg_head, ifindex); |
| if (op) { |
| /* update existing BCM operation */ |
| |
| /* |
| * Do we need more space for the CAN frames than currently |
| * allocated? -> This is a _really_ unusual use-case and |
| * therefore (complexity / locking) it is not supported. |
| */ |
| if (msg_head->nframes > op->nframes) |
| return -E2BIG; |
| |
| /* update CAN frames content */ |
| for (i = 0; i < msg_head->nframes; i++) { |
| |
| cf = op->frames + op->cfsiz * i; |
| err = memcpy_from_msg((u8 *)cf, msg, op->cfsiz); |
| |
| if (op->flags & CAN_FD_FRAME) { |
| if (cf->len > 64) |
| err = -EINVAL; |
| } else { |
| if (cf->len > 8) |
| err = -EINVAL; |
| } |
| |
| if (err < 0) |
| return err; |
| |
| if (msg_head->flags & TX_CP_CAN_ID) { |
| /* copy can_id into frame */ |
| cf->can_id = msg_head->can_id; |
| } |
| } |
| op->flags = msg_head->flags; |
| |
| } else { |
| /* insert new BCM operation for the given can_id */ |
| |
| op = kzalloc(OPSIZ, GFP_KERNEL); |
| if (!op) |
| return -ENOMEM; |
| |
| op->can_id = msg_head->can_id; |
| op->cfsiz = CFSIZ(msg_head->flags); |
| op->flags = msg_head->flags; |
| |
| /* create array for CAN frames and copy the data */ |
| if (msg_head->nframes > 1) { |
| op->frames = kmalloc_array(msg_head->nframes, |
| op->cfsiz, |
| GFP_KERNEL); |
| if (!op->frames) { |
| kfree(op); |
| return -ENOMEM; |
| } |
| } else |
| op->frames = &op->sframe; |
| |
| for (i = 0; i < msg_head->nframes; i++) { |
| |
| cf = op->frames + op->cfsiz * i; |
| err = memcpy_from_msg((u8 *)cf, msg, op->cfsiz); |
| if (err < 0) |
| goto free_op; |
| |
| if (op->flags & CAN_FD_FRAME) { |
| if (cf->len > 64) |
| err = -EINVAL; |
| } else { |
| if (cf->len > 8) |
| err = -EINVAL; |
| } |
| |
| if (err < 0) |
| goto free_op; |
| |
| if (msg_head->flags & TX_CP_CAN_ID) { |
| /* copy can_id into frame */ |
| cf->can_id = msg_head->can_id; |
| } |
| } |
| |
| /* tx_ops never compare with previous received messages */ |
| op->last_frames = NULL; |
| |
| /* bcm_can_tx / bcm_tx_timeout_handler needs this */ |
| op->sk = sk; |
| op->ifindex = ifindex; |
| |
| /* initialize uninitialized (kzalloc) structure */ |
| hrtimer_init(&op->timer, CLOCK_MONOTONIC, |
| HRTIMER_MODE_REL_SOFT); |
| op->timer.function = bcm_tx_timeout_handler; |
| |
| /* currently unused in tx_ops */ |
| hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, |
| HRTIMER_MODE_REL_SOFT); |
| |
| /* add this bcm_op to the list of the tx_ops */ |
| list_add(&op->list, &bo->tx_ops); |
| |
| } /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */ |
| |
| if (op->nframes != msg_head->nframes) { |
| op->nframes = msg_head->nframes; |
| /* start multiple frame transmission with index 0 */ |
| op->currframe = 0; |
| } |
| |
| /* check flags */ |
| |
| if (op->flags & TX_RESET_MULTI_IDX) { |
| /* start multiple frame transmission with index 0 */ |
| op->currframe = 0; |
| } |
| |
| if (op->flags & SETTIMER) { |
| /* set timer values */ |
| op->count = msg_head->count; |
| op->ival1 = msg_head->ival1; |
| op->ival2 = msg_head->ival2; |
| op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1); |
| op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2); |
| |
| /* disable an active timer due to zero values? */ |
| if (!op->kt_ival1 && !op->kt_ival2) |
| hrtimer_cancel(&op->timer); |
| } |
| |
| if (op->flags & STARTTIMER) { |
| hrtimer_cancel(&op->timer); |
| /* spec: send CAN frame when starting timer */ |
| op->flags |= TX_ANNOUNCE; |
| } |
| |
| if (op->flags & TX_ANNOUNCE) { |
| bcm_can_tx(op); |
| if (op->count) |
| op->count--; |
| } |
| |
| if (op->flags & STARTTIMER) |
| bcm_tx_start_timer(op); |
| |
| return msg_head->nframes * op->cfsiz + MHSIZ; |
| |
| free_op: |
| if (op->frames != &op->sframe) |
| kfree(op->frames); |
| kfree(op); |
| return err; |
| } |
| |
| /* |
| * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg) |
| */ |
| static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, |
| int ifindex, struct sock *sk) |
| { |
| struct bcm_sock *bo = bcm_sk(sk); |
| struct bcm_op *op; |
| int do_rx_register; |
| int err = 0; |
| |
| if ((msg_head->flags & RX_FILTER_ID) || (!(msg_head->nframes))) { |
| /* be robust against wrong usage ... */ |
| msg_head->flags |= RX_FILTER_ID; |
| /* ignore trailing garbage */ |
| msg_head->nframes = 0; |
| } |
| |
| /* the first element contains the mux-mask => MAX_NFRAMES + 1 */ |
| if (msg_head->nframes > MAX_NFRAMES + 1) |
| return -EINVAL; |
| |
| if ((msg_head->flags & RX_RTR_FRAME) && |
| ((msg_head->nframes != 1) || |
| (!(msg_head->can_id & CAN_RTR_FLAG)))) |
| return -EINVAL; |
| |
| /* check timeval limitations */ |
| if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head)) |
| return -EINVAL; |
| |
| /* check the given can_id */ |
| op = bcm_find_op(&bo->rx_ops, msg_head, ifindex); |
| if (op) { |
| /* update existing BCM operation */ |
| |
| /* |
| * Do we need more space for the CAN frames than currently |
| * allocated? -> This is a _really_ unusual use-case and |
| * therefore (complexity / locking) it is not supported. |
| */ |
| if (msg_head->nframes > op->nframes) |
| return -E2BIG; |
| |
| if (msg_head->nframes) { |
| /* update CAN frames content */ |
| err = memcpy_from_msg(op->frames, msg, |
| msg_head->nframes * op->cfsiz); |
| if (err < 0) |
| return err; |
| |
| /* clear last_frames to indicate 'nothing received' */ |
| memset(op->last_frames, 0, msg_head->nframes * op->cfsiz); |
| } |
| |
| op->nframes = msg_head->nframes; |
| op->flags = msg_head->flags; |
| |
| /* Only an update -> do not call can_rx_register() */ |
| do_rx_register = 0; |
| |
| } else { |
| /* insert new BCM operation for the given can_id */ |
| op = kzalloc(OPSIZ, GFP_KERNEL); |
| if (!op) |
| return -ENOMEM; |
| |
| op->can_id = msg_head->can_id; |
| op->nframes = msg_head->nframes; |
| op->cfsiz = CFSIZ(msg_head->flags); |
| op->flags = msg_head->flags; |
| |
| if (msg_head->nframes > 1) { |
| /* create array for CAN frames and copy the data */ |
| op->frames = kmalloc_array(msg_head->nframes, |
| op->cfsiz, |
| GFP_KERNEL); |
| if (!op->frames) { |
| kfree(op); |
| return -ENOMEM; |
| } |
| |
| /* create and init array for received CAN frames */ |
| op->last_frames = kcalloc(msg_head->nframes, |
| op->cfsiz, |
| GFP_KERNEL); |
| if (!op->last_frames) { |
| kfree(op->frames); |
| kfree(op); |
| return -ENOMEM; |
| } |
| |
| } else { |
| op->frames = &op->sframe; |
| op->last_frames = &op->last_sframe; |
| } |
| |
| if (msg_head->nframes) { |
| err = memcpy_from_msg(op->frames, msg, |
| msg_head->nframes * op->cfsiz); |
| if (err < 0) { |
| if (op->frames != &op->sframe) |
| kfree(op->frames); |
| if (op->last_frames != &op->last_sframe) |
| kfree(op->last_frames); |
| kfree(op); |
| return err; |
| } |
| } |
| |
| /* bcm_can_tx / bcm_tx_timeout_handler needs this */ |
| op->sk = sk; |
| op->ifindex = ifindex; |
| |
| /* ifindex for timeout events w/o previous frame reception */ |
| op->rx_ifindex = ifindex; |
| |
| /* initialize uninitialized (kzalloc) structure */ |
| hrtimer_init(&op->timer, CLOCK_MONOTONIC, |
| HRTIMER_MODE_REL_SOFT); |
| op->timer.function = bcm_rx_timeout_handler; |
| |
| hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, |
| HRTIMER_MODE_REL_SOFT); |
| op->thrtimer.function = bcm_rx_thr_handler; |
| |
| /* add this bcm_op to the list of the rx_ops */ |
| list_add(&op->list, &bo->rx_ops); |
| |
| /* call can_rx_register() */ |
| do_rx_register = 1; |
| |
| } /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */ |
| |
| /* check flags */ |
| |
| if (op->flags & RX_RTR_FRAME) { |
| struct canfd_frame *frame0 = op->frames; |
| |
| /* no timers in RTR-mode */ |
| hrtimer_cancel(&op->thrtimer); |
| hrtimer_cancel(&op->timer); |
| |
| /* |
| * funny feature in RX(!)_SETUP only for RTR-mode: |
| * copy can_id into frame BUT without RTR-flag to |
| * prevent a full-load-loopback-test ... ;-] |
| */ |
| if ((op->flags & TX_CP_CAN_ID) || |
| (frame0->can_id == op->can_id)) |
| frame0->can_id = op->can_id & ~CAN_RTR_FLAG; |
| |
| } else { |
| if (op->flags & SETTIMER) { |
| |
| /* set timer value */ |
| op->ival1 = msg_head->ival1; |
| op->ival2 = msg_head->ival2; |
| op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1); |
| op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2); |
| |
| /* disable an active timer due to zero value? */ |
| if (!op->kt_ival1) |
| hrtimer_cancel(&op->timer); |
| |
| /* |
| * In any case cancel the throttle timer, flush |
| * potentially blocked msgs and reset throttle handling |
| */ |
| op->kt_lastmsg = 0; |
| hrtimer_cancel(&op->thrtimer); |
| bcm_rx_thr_flush(op); |
| } |
| |
| if ((op->flags & STARTTIMER) && op->kt_ival1) |
| hrtimer_start(&op->timer, op->kt_ival1, |
| HRTIMER_MODE_REL_SOFT); |
| } |
| |
| /* now we can register for can_ids, if we added a new bcm_op */ |
| if (do_rx_register) { |
| if (ifindex) { |
| struct net_device *dev; |
| |
| dev = dev_get_by_index(sock_net(sk), ifindex); |
| if (dev) { |
| err = can_rx_register(sock_net(sk), dev, |
| op->can_id, |
| REGMASK(op->can_id), |
| bcm_rx_handler, op, |
| "bcm", sk); |
| |
| op->rx_reg_dev = dev; |
| dev_put(dev); |
| } |
| |
| } else |
| err = can_rx_register(sock_net(sk), NULL, op->can_id, |
| REGMASK(op->can_id), |
| bcm_rx_handler, op, "bcm", sk); |
| if (err) { |
| /* this bcm rx op is broken -> remove it */ |
| list_del(&op->list); |
| bcm_remove_op(op); |
| return err; |
| } |
| } |
| |
| return msg_head->nframes * op->cfsiz + MHSIZ; |
| } |
| |
| /* |
| * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg) |
| */ |
| static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk, |
| int cfsiz) |
| { |
| struct sk_buff *skb; |
| struct net_device *dev; |
| int err; |
| |
| /* we need a real device to send frames */ |
| if (!ifindex) |
| return -ENODEV; |
| |
| skb = alloc_skb(cfsiz + sizeof(struct can_skb_priv), GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| |
| can_skb_reserve(skb); |
| |
| err = memcpy_from_msg(skb_put(skb, cfsiz), msg, cfsiz); |
| if (err < 0) { |
| kfree_skb(skb); |
| return err; |
| } |
| |
| dev = dev_get_by_index(sock_net(sk), ifindex); |
| if (!dev) { |
| kfree_skb(skb); |
| return -ENODEV; |
| } |
| |
| can_skb_prv(skb)->ifindex = dev->ifindex; |
| can_skb_prv(skb)->skbcnt = 0; |
| skb->dev = dev; |
| can_skb_set_owner(skb, sk); |
| err = can_send(skb, 1); /* send with loopback */ |
| dev_put(dev); |
| |
| if (err) |
| return err; |
| |
| return cfsiz + MHSIZ; |
| } |
| |
| /* |
| * bcm_sendmsg - process BCM commands (opcodes) from the userspace |
| */ |
| static int bcm_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) |
| { |
| struct sock *sk = sock->sk; |
| struct bcm_sock *bo = bcm_sk(sk); |
| int ifindex = bo->ifindex; /* default ifindex for this bcm_op */ |
| struct bcm_msg_head msg_head; |
| int cfsiz; |
| int ret; /* read bytes or error codes as return value */ |
| |
| if (!bo->bound) |
| return -ENOTCONN; |
| |
| /* check for valid message length from userspace */ |
| if (size < MHSIZ) |
| return -EINVAL; |
| |
| /* read message head information */ |
| ret = memcpy_from_msg((u8 *)&msg_head, msg, MHSIZ); |
| if (ret < 0) |
| return ret; |
| |
| cfsiz = CFSIZ(msg_head.flags); |
| if ((size - MHSIZ) % cfsiz) |
| return -EINVAL; |
| |
| /* check for alternative ifindex for this bcm_op */ |
| |
| if (!ifindex && msg->msg_name) { |
| /* no bound device as default => check msg_name */ |
| DECLARE_SOCKADDR(struct sockaddr_can *, addr, msg->msg_name); |
| |
| if (msg->msg_namelen < BCM_MIN_NAMELEN) |
| return -EINVAL; |
| |
| if (addr->can_family != AF_CAN) |
| return -EINVAL; |
| |
| /* ifindex from sendto() */ |
| ifindex = addr->can_ifindex; |
| |
| if (ifindex) { |
| struct net_device *dev; |
| |
| dev = dev_get_by_index(sock_net(sk), ifindex); |
| if (!dev) |
| return -ENODEV; |
| |
| if (dev->type != ARPHRD_CAN) { |
| dev_put(dev); |
| return -ENODEV; |
| } |
| |
| dev_put(dev); |
| } |
| } |
| |
| lock_sock(sk); |
| |
| switch (msg_head.opcode) { |
| |
| case TX_SETUP: |
| ret = bcm_tx_setup(&msg_head, msg, ifindex, sk); |
| break; |
| |
| case RX_SETUP: |
| ret = bcm_rx_setup(&msg_head, msg, ifindex, sk); |
| break; |
| |
| case TX_DELETE: |
| if (bcm_delete_tx_op(&bo->tx_ops, &msg_head, ifindex)) |
| ret = MHSIZ; |
| else |
| ret = -EINVAL; |
| break; |
| |
| case RX_DELETE: |
| if (bcm_delete_rx_op(&bo->rx_ops, &msg_head, ifindex)) |
| ret = MHSIZ; |
| else |
| ret = -EINVAL; |
| break; |
| |
| case TX_READ: |
| /* reuse msg_head for the reply to TX_READ */ |
| msg_head.opcode = TX_STATUS; |
| ret = bcm_read_op(&bo->tx_ops, &msg_head, ifindex); |
| break; |
| |
| case RX_READ: |
| /* reuse msg_head for the reply to RX_READ */ |
| msg_head.opcode = RX_STATUS; |
| ret = bcm_read_op(&bo->rx_ops, &msg_head, ifindex); |
| break; |
| |
| case TX_SEND: |
| /* we need exactly one CAN frame behind the msg head */ |
| if ((msg_head.nframes != 1) || (size != cfsiz + MHSIZ)) |
| ret = -EINVAL; |
| else |
| ret = bcm_tx_send(msg, ifindex, sk, cfsiz); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| release_sock(sk); |
| |
| return ret; |
| } |
| |
| /* |
| * notification handler for netdevice status changes |
| */ |
| static void bcm_notify(struct bcm_sock *bo, unsigned long msg, |
| struct net_device *dev) |
| { |
| struct sock *sk = &bo->sk; |
| struct bcm_op *op; |
| int notify_enodev = 0; |
| |
| if (!net_eq(dev_net(dev), sock_net(sk))) |
| return; |
| |
| switch (msg) { |
| |
| case NETDEV_UNREGISTER: |
| lock_sock(sk); |
| |
| /* remove device specific receive entries */ |
| list_for_each_entry(op, &bo->rx_ops, list) |
| if (op->rx_reg_dev == dev) |
| bcm_rx_unreg(dev, op); |
| |
| /* remove device reference, if this is our bound device */ |
| if (bo->bound && bo->ifindex == dev->ifindex) { |
| bo->bound = 0; |
| bo->ifindex = 0; |
| notify_enodev = 1; |
| } |
| |
| release_sock(sk); |
| |
| if (notify_enodev) { |
| sk->sk_err = ENODEV; |
| if (!sock_flag(sk, SOCK_DEAD)) |
| sk_error_report(sk); |
| } |
| break; |
| |
| case NETDEV_DOWN: |
| if (bo->bound && bo->ifindex == dev->ifindex) { |
| sk->sk_err = ENETDOWN; |
| if (!sock_flag(sk, SOCK_DEAD)) |
| sk_error_report(sk); |
| } |
| } |
| } |
| |
| static int bcm_notifier(struct notifier_block *nb, unsigned long msg, |
| void *ptr) |
| { |
| struct net_device *dev = netdev_notifier_info_to_dev(ptr); |
| |
| if (dev->type != ARPHRD_CAN) |
| return NOTIFY_DONE; |
| if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN) |
| return NOTIFY_DONE; |
| if (unlikely(bcm_busy_notifier)) /* Check for reentrant bug. */ |
| return NOTIFY_DONE; |
| |
| spin_lock(&bcm_notifier_lock); |
| list_for_each_entry(bcm_busy_notifier, &bcm_notifier_list, notifier) { |
| spin_unlock(&bcm_notifier_lock); |
| bcm_notify(bcm_busy_notifier, msg, dev); |
| spin_lock(&bcm_notifier_lock); |
| } |
| bcm_busy_notifier = NULL; |
| spin_unlock(&bcm_notifier_lock); |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * initial settings for all BCM sockets to be set at socket creation time |
| */ |
| static int bcm_init(struct sock *sk) |
| { |
| struct bcm_sock *bo = bcm_sk(sk); |
| |
| bo->bound = 0; |
| bo->ifindex = 0; |
| bo->dropped_usr_msgs = 0; |
| bo->bcm_proc_read = NULL; |
| |
| INIT_LIST_HEAD(&bo->tx_ops); |
| INIT_LIST_HEAD(&bo->rx_ops); |
| |
| /* set notifier */ |
| spin_lock(&bcm_notifier_lock); |
| list_add_tail(&bo->notifier, &bcm_notifier_list); |
| spin_unlock(&bcm_notifier_lock); |
| |
| return 0; |
| } |
| |
| /* |
| * standard socket functions |
| */ |
| static int bcm_release(struct socket *sock) |
| { |
| struct sock *sk = sock->sk; |
| struct net *net; |
| struct bcm_sock *bo; |
| struct bcm_op *op, *next; |
| |
| if (!sk) |
| return 0; |
| |
| net = sock_net(sk); |
| bo = bcm_sk(sk); |
| |
| /* remove bcm_ops, timer, rx_unregister(), etc. */ |
| |
| spin_lock(&bcm_notifier_lock); |
| while (bcm_busy_notifier == bo) { |
| spin_unlock(&bcm_notifier_lock); |
| schedule_timeout_uninterruptible(1); |
| spin_lock(&bcm_notifier_lock); |
| } |
| list_del(&bo->notifier); |
| spin_unlock(&bcm_notifier_lock); |
| |
| lock_sock(sk); |
| |
| #if IS_ENABLED(CONFIG_PROC_FS) |
| /* remove procfs entry */ |
| if (net->can.bcmproc_dir && bo->bcm_proc_read) |
| remove_proc_entry(bo->procname, net->can.bcmproc_dir); |
| #endif /* CONFIG_PROC_FS */ |
| |
| list_for_each_entry_safe(op, next, &bo->tx_ops, list) |
| bcm_remove_op(op); |
| |
| list_for_each_entry_safe(op, next, &bo->rx_ops, list) { |
| /* |
| * Don't care if we're bound or not (due to netdev problems) |
| * can_rx_unregister() is always a save thing to do here. |
| */ |
| if (op->ifindex) { |
| /* |
| * Only remove subscriptions that had not |
| * been removed due to NETDEV_UNREGISTER |
| * in bcm_notifier() |
| */ |
| if (op->rx_reg_dev) { |
| struct net_device *dev; |
| |
| dev = dev_get_by_index(net, op->ifindex); |
| if (dev) { |
| bcm_rx_unreg(dev, op); |
| dev_put(dev); |
| } |
| } |
| } else |
| can_rx_unregister(net, NULL, op->can_id, |
| REGMASK(op->can_id), |
| bcm_rx_handler, op); |
| |
| } |
| |
| synchronize_rcu(); |
| |
| list_for_each_entry_safe(op, next, &bo->rx_ops, list) |
| bcm_remove_op(op); |
| |
| /* remove device reference */ |
| if (bo->bound) { |
| bo->bound = 0; |
| bo->ifindex = 0; |
| } |
| |
| sock_orphan(sk); |
| sock->sk = NULL; |
| |
| release_sock(sk); |
| sock_put(sk); |
| |
| return 0; |
| } |
| |
| static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, |
| int flags) |
| { |
| struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; |
| struct sock *sk = sock->sk; |
| struct bcm_sock *bo = bcm_sk(sk); |
| struct net *net = sock_net(sk); |
| int ret = 0; |
| |
| if (len < BCM_MIN_NAMELEN) |
| return -EINVAL; |
| |
| lock_sock(sk); |
| |
| if (bo->bound) { |
| ret = -EISCONN; |
| goto fail; |
| } |
| |
| /* bind a device to this socket */ |
| if (addr->can_ifindex) { |
| struct net_device *dev; |
| |
| dev = dev_get_by_index(net, addr->can_ifindex); |
| if (!dev) { |
| ret = -ENODEV; |
| goto fail; |
| } |
| if (dev->type != ARPHRD_CAN) { |
| dev_put(dev); |
| ret = -ENODEV; |
| goto fail; |
| } |
| |
| bo->ifindex = dev->ifindex; |
| dev_put(dev); |
| |
| } else { |
| /* no interface reference for ifindex = 0 ('any' CAN device) */ |
| bo->ifindex = 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_PROC_FS) |
| if (net->can.bcmproc_dir) { |
| /* unique socket address as filename */ |
| sprintf(bo->procname, "%lu", sock_i_ino(sk)); |
| bo->bcm_proc_read = proc_create_net_single(bo->procname, 0644, |
| net->can.bcmproc_dir, |
| bcm_proc_show, sk); |
| if (!bo->bcm_proc_read) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| bo->bound = 1; |
| |
| fail: |
| release_sock(sk); |
| |
| return ret; |
| } |
| |
| static int bcm_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, |
| int flags) |
| { |
| struct sock *sk = sock->sk; |
| struct sk_buff *skb; |
| int error = 0; |
| int err; |
| |
| skb = skb_recv_datagram(sk, flags, &error); |
| if (!skb) |
| return error; |
| |
| if (skb->len < size) |
| size = skb->len; |
| |
| err = memcpy_to_msg(msg, skb->data, size); |
| if (err < 0) { |
| skb_free_datagram(sk, skb); |
| return err; |
| } |
| |
| sock_recv_cmsgs(msg, sk, skb); |
| |
| if (msg->msg_name) { |
| __sockaddr_check_size(BCM_MIN_NAMELEN); |
| msg->msg_namelen = BCM_MIN_NAMELEN; |
| memcpy(msg->msg_name, skb->cb, msg->msg_namelen); |
| } |
| |
| skb_free_datagram(sk, skb); |
| |
| return size; |
| } |
| |
| static int bcm_sock_no_ioctlcmd(struct socket *sock, unsigned int cmd, |
| unsigned long arg) |
| { |
| /* no ioctls for socket layer -> hand it down to NIC layer */ |
| return -ENOIOCTLCMD; |
| } |
| |
| static const struct proto_ops bcm_ops = { |
| .family = PF_CAN, |
| .release = bcm_release, |
| .bind = sock_no_bind, |
| .connect = bcm_connect, |
| .socketpair = sock_no_socketpair, |
| .accept = sock_no_accept, |
| .getname = sock_no_getname, |
| .poll = datagram_poll, |
| .ioctl = bcm_sock_no_ioctlcmd, |
| .gettstamp = sock_gettstamp, |
| .listen = sock_no_listen, |
| .shutdown = sock_no_shutdown, |
| .sendmsg = bcm_sendmsg, |
| .recvmsg = bcm_recvmsg, |
| .mmap = sock_no_mmap, |
| }; |
| |
| static struct proto bcm_proto __read_mostly = { |
| .name = "CAN_BCM", |
| .owner = THIS_MODULE, |
| .obj_size = sizeof(struct bcm_sock), |
| .init = bcm_init, |
| }; |
| |
| static const struct can_proto bcm_can_proto = { |
| .type = SOCK_DGRAM, |
| .protocol = CAN_BCM, |
| .ops = &bcm_ops, |
| .prot = &bcm_proto, |
| }; |
| |
| static int canbcm_pernet_init(struct net *net) |
| { |
| #if IS_ENABLED(CONFIG_PROC_FS) |
| /* create /proc/net/can-bcm directory */ |
| net->can.bcmproc_dir = proc_net_mkdir(net, "can-bcm", net->proc_net); |
| #endif /* CONFIG_PROC_FS */ |
| |
| return 0; |
| } |
| |
| static void canbcm_pernet_exit(struct net *net) |
| { |
| #if IS_ENABLED(CONFIG_PROC_FS) |
| /* remove /proc/net/can-bcm directory */ |
| if (net->can.bcmproc_dir) |
| remove_proc_entry("can-bcm", net->proc_net); |
| #endif /* CONFIG_PROC_FS */ |
| } |
| |
| static struct pernet_operations canbcm_pernet_ops __read_mostly = { |
| .init = canbcm_pernet_init, |
| .exit = canbcm_pernet_exit, |
| }; |
| |
| static struct notifier_block canbcm_notifier = { |
| .notifier_call = bcm_notifier |
| }; |
| |
| static int __init bcm_module_init(void) |
| { |
| int err; |
| |
| pr_info("can: broadcast manager protocol\n"); |
| |
| err = register_pernet_subsys(&canbcm_pernet_ops); |
| if (err) |
| return err; |
| |
| err = register_netdevice_notifier(&canbcm_notifier); |
| if (err) |
| goto register_notifier_failed; |
| |
| err = can_proto_register(&bcm_can_proto); |
| if (err < 0) { |
| printk(KERN_ERR "can: registration of bcm protocol failed\n"); |
| goto register_proto_failed; |
| } |
| |
| return 0; |
| |
| register_proto_failed: |
| unregister_netdevice_notifier(&canbcm_notifier); |
| register_notifier_failed: |
| unregister_pernet_subsys(&canbcm_pernet_ops); |
| return err; |
| } |
| |
| static void __exit bcm_module_exit(void) |
| { |
| can_proto_unregister(&bcm_can_proto); |
| unregister_netdevice_notifier(&canbcm_notifier); |
| unregister_pernet_subsys(&canbcm_pernet_ops); |
| } |
| |
| module_init(bcm_module_init); |
| module_exit(bcm_module_exit); |