| # SPDX-License-Identifier: GPL-2.0-only |
| if ARCH_OMAP1 |
| |
| menu "TI OMAP1 specific features" |
| |
| comment "OMAP Core Type" |
| |
| config ARCH_OMAP730 |
| bool "OMAP730 Based System" |
| select ARCH_OMAP_OTG |
| select CPU_ARM926T |
| select OMAP_MPU_TIMER |
| |
| config ARCH_OMAP850 |
| bool "OMAP850 Based System" |
| select ARCH_OMAP_OTG |
| select CPU_ARM926T |
| |
| config ARCH_OMAP15XX |
| default y |
| bool "OMAP15xx Based System" |
| select CPU_ARM925T |
| select OMAP_MPU_TIMER |
| |
| config ARCH_OMAP16XX |
| bool "OMAP16xx Based System" |
| select ARCH_OMAP_OTG |
| select CPU_ARM926T |
| select OMAP_DM_TIMER |
| |
| config OMAP_MUX |
| bool "OMAP multiplexing support" |
| default y |
| help |
| Pin multiplexing support for OMAP boards. If your bootloader |
| sets the multiplexing correctly, say N. Otherwise, or if unsure, |
| say Y. |
| |
| config OMAP_MUX_DEBUG |
| bool "Multiplexing debug output" |
| depends on OMAP_MUX |
| help |
| Makes the multiplexing functions print out a lot of debug info. |
| This is useful if you want to find out the correct values of the |
| multiplexing registers. |
| |
| config OMAP_MUX_WARNINGS |
| bool "Warn about pins the bootloader didn't set up" |
| depends on OMAP_MUX |
| default y |
| help |
| Choose Y here to warn whenever driver initialization logic needs |
| to change the pin multiplexing setup. When there are no warnings |
| printed, it's safe to deselect OMAP_MUX for your product. |
| |
| comment "OMAP Board Type" |
| |
| config MACH_OMAP_INNOVATOR |
| bool "TI Innovator" |
| depends on ARCH_OMAP15XX || ARCH_OMAP16XX |
| help |
| TI OMAP 1510 or 1610 Innovator board support. Say Y here if you |
| have such a board. |
| |
| config MACH_OMAP_H2 |
| bool "TI H2 Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 1610/1611B H2 board support. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_H3 |
| bool "TI H3 Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 1710 H3 board support. Say Y here if you have such |
| a board. |
| |
| config MACH_HERALD |
| bool "HTC Herald" |
| depends on ARCH_OMAP850 |
| help |
| HTC Herald smartphone support (AKA T-Mobile Wing, ...) |
| |
| config MACH_OMAP_OSK |
| bool "TI OSK Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here |
| if you have such a board. |
| |
| config OMAP_OSK_MISTRAL |
| bool "Mistral QVGA board Support" |
| depends on MACH_OMAP_OSK |
| help |
| The OSK supports an optional add-on board with a Quarter-VGA |
| touchscreen, PDA-ish buttons, a resume button, bicolor LED, |
| and camera connector. Say Y here if you have this board. |
| |
| config MACH_OMAP_PERSEUS2 |
| bool "TI Perseus2" |
| depends on ARCH_OMAP730 |
| help |
| Support for TI OMAP 730 Perseus2 board. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_FSAMPLE |
| bool "TI F-Sample" |
| depends on ARCH_OMAP730 |
| help |
| Support for TI OMAP 850 F-Sample board. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_PALMTE |
| bool "Palm Tungsten E" |
| depends on ARCH_OMAP15XX |
| help |
| Support for the Palm Tungsten E PDA. To boot the kernel, you'll |
| need a PalmOS compatible bootloader; check out |
| http://palmtelinux.sourceforge.net/ for more information. |
| Say Y here if you have this PDA model, say N otherwise. |
| |
| config MACH_OMAP_PALMZ71 |
| bool "Palm Zire71" |
| depends on ARCH_OMAP15XX |
| help |
| Support for the Palm Zire71 PDA. To boot the kernel, |
| you'll need a PalmOS compatible bootloader; check out |
| http://hackndev.com/palm/z71 for more information. |
| Say Y here if you have such a PDA, say N otherwise. |
| |
| config MACH_OMAP_PALMTT |
| bool "Palm Tungsten|T" |
| depends on ARCH_OMAP15XX |
| help |
| Support for the Palm Tungsten|T PDA. To boot the kernel, you'll |
| need a PalmOS compatible bootloader (Garux); check out |
| http://garux.sourceforge.net/ for more information. |
| Say Y here if you have this PDA model, say N otherwise. |
| |
| config MACH_SX1 |
| bool "Siemens SX1" |
| depends on ARCH_OMAP15XX |
| select I2C |
| help |
| Support for the Siemens SX1 phone. To boot the kernel, |
| you'll need a SX1 compatible bootloader; check out |
| http://forum.oslik.ru and |
| https://www.handhelds.org/moin/moin.cgi/SiemensSX1 |
| for more information. |
| Say Y here if you have such a phone, say NO otherwise. |
| |
| config MACH_NOKIA770 |
| bool "Nokia 770" |
| depends on ARCH_OMAP16XX |
| help |
| Support for the Nokia 770 Internet Tablet. Say Y here if you |
| have such a device. |
| |
| config MACH_AMS_DELTA |
| bool "Amstrad E3 (Delta)" |
| depends on ARCH_OMAP15XX |
| select FIQ |
| select GPIO_GENERIC_PLATFORM |
| select LEDS_GPIO_REGISTER |
| select REGULATOR |
| select REGULATOR_FIXED_VOLTAGE |
| help |
| Support for the Amstrad E3 (codename Delta) videophone. Say Y here |
| if you have such a device. |
| |
| config MACH_OMAP_GENERIC |
| bool "Generic OMAP board" |
| depends on ARCH_OMAP15XX || ARCH_OMAP16XX |
| help |
| Support for generic OMAP-1510, 1610 or 1710 board with |
| no FPGA. Can be used as template for porting Linux to |
| custom OMAP boards. Say Y here if you have a custom |
| board. |
| |
| endmenu |
| |
| endif |
