| // SPDX-License-Identifier: GPL-2.0-only |
| /* DVB USB compliant linux driver for Conexant USB reference design. |
| * |
| * The Conexant reference design I saw on their website was only for analogue |
| * capturing (using the cx25842). The box I took to write this driver (reverse |
| * engineered) is the one labeled Medion MD95700. In addition to the cx25842 |
| * for analogue capturing it also has a cx22702 DVB-T demodulator on the main |
| * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. |
| * |
| * Maybe it is a little bit premature to call this driver cxusb, but I assume |
| * the USB protocol is identical or at least inherited from the reference |
| * design, so it can be reused for the "analogue-only" device (if it will |
| * appear at all). |
| * |
| * |
| * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@posteo.de) |
| * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org) |
| * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au) |
| * Copyright (C) 2011, 2017 Maciej S. Szmigiero (mail@maciej.szmigiero.name) |
| * |
| * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information |
| */ |
| #include <media/tuner.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/vmalloc.h> |
| |
| #include "cxusb.h" |
| |
| #include "cx22702.h" |
| #include "lgdt330x.h" |
| #include "mt352.h" |
| #include "mt352_priv.h" |
| #include "zl10353.h" |
| #include "tuner-xc2028.h" |
| #include "tuner-simple.h" |
| #include "mxl5005s.h" |
| #include "max2165.h" |
| #include "dib7000p.h" |
| #include "dib0070.h" |
| #include "lgs8gxx.h" |
| #include "atbm8830.h" |
| #include "si2168.h" |
| #include "si2157.h" |
| |
| /* debug */ |
| int dvb_usb_cxusb_debug; |
| module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (see cxusb.h)." |
| DVB_USB_DEBUG_STATUS); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| enum cxusb_table_index { |
| MEDION_MD95700, |
| DVICO_BLUEBIRD_LG064F_COLD, |
| DVICO_BLUEBIRD_LG064F_WARM, |
| DVICO_BLUEBIRD_DUAL_1_COLD, |
| DVICO_BLUEBIRD_DUAL_1_WARM, |
| DVICO_BLUEBIRD_LGZ201_COLD, |
| DVICO_BLUEBIRD_LGZ201_WARM, |
| DVICO_BLUEBIRD_TH7579_COLD, |
| DVICO_BLUEBIRD_TH7579_WARM, |
| DIGITALNOW_BLUEBIRD_DUAL_1_COLD, |
| DIGITALNOW_BLUEBIRD_DUAL_1_WARM, |
| DVICO_BLUEBIRD_DUAL_2_COLD, |
| DVICO_BLUEBIRD_DUAL_2_WARM, |
| DVICO_BLUEBIRD_DUAL_4, |
| DVICO_BLUEBIRD_DVB_T_NANO_2, |
| DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM, |
| AVERMEDIA_VOLAR_A868R, |
| DVICO_BLUEBIRD_DUAL_4_REV_2, |
| CONEXANT_D680_DMB, |
| MYGICA_D689, |
| NR__cxusb_table_index |
| }; |
| |
| static struct usb_device_id cxusb_table[]; |
| |
| int cxusb_ctrl_msg(struct dvb_usb_device *d, |
| u8 cmd, const u8 *wbuf, int wlen, u8 *rbuf, int rlen) |
| { |
| struct cxusb_state *st = d->priv; |
| int ret; |
| |
| if (1 + wlen > MAX_XFER_SIZE) { |
| warn("i2c wr: len=%d is too big!\n", wlen); |
| return -EOPNOTSUPP; |
| } |
| |
| if (rlen > MAX_XFER_SIZE) { |
| warn("i2c rd: len=%d is too big!\n", rlen); |
| return -EOPNOTSUPP; |
| } |
| |
| mutex_lock(&d->data_mutex); |
| st->data[0] = cmd; |
| memcpy(&st->data[1], wbuf, wlen); |
| ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, st->data, rlen, 0); |
| if (!ret && rbuf && rlen) |
| memcpy(rbuf, st->data, rlen); |
| |
| mutex_unlock(&d->data_mutex); |
| return ret; |
| } |
| |
| /* GPIO */ |
| static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) |
| { |
| struct cxusb_state *st = d->priv; |
| u8 o[2], i; |
| |
| if (st->gpio_write_state[GPIO_TUNER] == onoff && |
| !st->gpio_write_refresh[GPIO_TUNER]) |
| return; |
| |
| o[0] = GPIO_TUNER; |
| o[1] = onoff; |
| cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); |
| |
| if (i != 0x01) |
| dev_info(&d->udev->dev, "gpio_write failed.\n"); |
| |
| st->gpio_write_state[GPIO_TUNER] = onoff; |
| st->gpio_write_refresh[GPIO_TUNER] = false; |
| } |
| |
| static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask, |
| u8 newval) |
| { |
| u8 o[2], gpio_state; |
| int rc; |
| |
| o[0] = 0xff & ~changemask; /* mask of bits to keep */ |
| o[1] = newval & changemask; /* new values for bits */ |
| |
| rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1); |
| if (rc < 0 || (gpio_state & changemask) != (newval & changemask)) |
| dev_info(&d->udev->dev, "bluebird_gpio_write failed.\n"); |
| |
| return rc < 0 ? rc : gpio_state; |
| } |
| |
| static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low) |
| { |
| cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin); |
| msleep(5); |
| cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0); |
| } |
| |
| static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) |
| { |
| cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); |
| } |
| |
| static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, |
| u8 addr, int onoff) |
| { |
| u8 o[2] = {addr, onoff}; |
| u8 i; |
| int rc; |
| |
| rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); |
| |
| if (rc < 0) |
| return rc; |
| |
| if (i == 0x01) |
| return 0; |
| |
| dev_info(&d->udev->dev, "gpio_write failed.\n"); |
| return -EIO; |
| } |
| |
| /* I2C */ |
| static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret; |
| int i; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (i = 0; i < num; i++) { |
| if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_MEDION) |
| switch (msg[i].addr) { |
| case 0x63: |
| cxusb_gpio_tuner(d, 0); |
| break; |
| default: |
| cxusb_gpio_tuner(d, 1); |
| break; |
| } |
| |
| if (msg[i].flags & I2C_M_RD) { |
| /* read only */ |
| u8 obuf[3], ibuf[MAX_XFER_SIZE]; |
| |
| if (1 + msg[i].len > sizeof(ibuf)) { |
| warn("i2c rd: len=%d is too big!\n", |
| msg[i].len); |
| ret = -EOPNOTSUPP; |
| goto unlock; |
| } |
| obuf[0] = 0; |
| obuf[1] = msg[i].len; |
| obuf[2] = msg[i].addr; |
| if (cxusb_ctrl_msg(d, CMD_I2C_READ, |
| obuf, 3, |
| ibuf, 1 + msg[i].len) < 0) { |
| warn("i2c read failed"); |
| break; |
| } |
| memcpy(msg[i].buf, &ibuf[1], msg[i].len); |
| } else if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD) && |
| msg[i].addr == msg[i + 1].addr) { |
| /* write to then read from same address */ |
| u8 obuf[MAX_XFER_SIZE], ibuf[MAX_XFER_SIZE]; |
| |
| if (3 + msg[i].len > sizeof(obuf)) { |
| warn("i2c wr: len=%d is too big!\n", |
| msg[i].len); |
| ret = -EOPNOTSUPP; |
| goto unlock; |
| } |
| if (1 + msg[i + 1].len > sizeof(ibuf)) { |
| warn("i2c rd: len=%d is too big!\n", |
| msg[i + 1].len); |
| ret = -EOPNOTSUPP; |
| goto unlock; |
| } |
| obuf[0] = msg[i].len; |
| obuf[1] = msg[i + 1].len; |
| obuf[2] = msg[i].addr; |
| memcpy(&obuf[3], msg[i].buf, msg[i].len); |
| |
| if (cxusb_ctrl_msg(d, CMD_I2C_READ, |
| obuf, 3 + msg[i].len, |
| ibuf, 1 + msg[i + 1].len) < 0) |
| break; |
| |
| if (ibuf[0] != 0x08) |
| dev_info(&d->udev->dev, "i2c read may have failed\n"); |
| |
| memcpy(msg[i + 1].buf, &ibuf[1], msg[i + 1].len); |
| |
| i++; |
| } else { |
| /* write only */ |
| u8 obuf[MAX_XFER_SIZE], ibuf; |
| |
| if (2 + msg[i].len > sizeof(obuf)) { |
| warn("i2c wr: len=%d is too big!\n", |
| msg[i].len); |
| ret = -EOPNOTSUPP; |
| goto unlock; |
| } |
| obuf[0] = msg[i].addr; |
| obuf[1] = msg[i].len; |
| memcpy(&obuf[2], msg[i].buf, msg[i].len); |
| |
| if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf, |
| 2 + msg[i].len, &ibuf, 1) < 0) |
| break; |
| if (ibuf != 0x08) |
| dev_info(&d->udev->dev, "i2c write may have failed\n"); |
| } |
| } |
| |
| if (i == num) |
| ret = num; |
| else |
| ret = -EREMOTEIO; |
| |
| unlock: |
| mutex_unlock(&d->i2c_mutex); |
| return ret; |
| } |
| |
| static u32 cxusb_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm cxusb_i2c_algo = { |
| .master_xfer = cxusb_i2c_xfer, |
| .functionality = cxusb_i2c_func, |
| }; |
| |
| static int _cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| u8 b = 0; |
| |
| dev_info(&d->udev->dev, "setting power %s\n", onoff ? "ON" : "OFF"); |
| |
| if (onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); |
| else |
| return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); |
| } |
| |
| static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| bool is_medion = d->props.devices[0].warm_ids[0] == &cxusb_table[MEDION_MD95700]; |
| int ret; |
| |
| if (is_medion && !onoff) { |
| struct cxusb_medion_dev *cxdev = d->priv; |
| |
| mutex_lock(&cxdev->open_lock); |
| |
| if (cxdev->open_type == CXUSB_OPEN_ANALOG) { |
| dev_info(&d->udev->dev, "preventing DVB core from setting power OFF while we are in analog mode\n"); |
| ret = -EBUSY; |
| goto ret_unlock; |
| } |
| } |
| |
| ret = _cxusb_power_ctrl(d, onoff); |
| |
| ret_unlock: |
| if (is_medion && !onoff) { |
| struct cxusb_medion_dev *cxdev = d->priv; |
| |
| mutex_unlock(&cxdev->open_lock); |
| } |
| |
| return ret; |
| } |
| |
| static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| |
| if (!onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0); |
| if (d->state == DVB_USB_STATE_INIT && |
| usb_set_interface(d->udev, 0, 0) < 0) |
| err("set interface failed"); |
| do { |
| /* Nothing */ |
| } while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && |
| !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && |
| !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); |
| |
| if (!ret) { |
| /* |
| * FIXME: We don't know why, but we need to configure the |
| * lgdt3303 with the register settings below on resume |
| */ |
| int i; |
| u8 buf; |
| static const u8 bufs[] = { |
| 0x0e, 0x2, 0x00, 0x7f, |
| 0x0e, 0x2, 0x02, 0xfe, |
| 0x0e, 0x2, 0x02, 0x01, |
| 0x0e, 0x2, 0x00, 0x03, |
| 0x0e, 0x2, 0x0d, 0x40, |
| 0x0e, 0x2, 0x0e, 0x87, |
| 0x0e, 0x2, 0x0f, 0x8e, |
| 0x0e, 0x2, 0x10, 0x01, |
| 0x0e, 0x2, 0x14, 0xd7, |
| 0x0e, 0x2, 0x47, 0x88, |
| }; |
| msleep(20); |
| for (i = 0; i < ARRAY_SIZE(bufs); i += 4 / sizeof(u8)) { |
| ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE, |
| bufs + i, 4, &buf, 1); |
| if (ret) |
| break; |
| if (buf != 0x8) |
| return -EREMOTEIO; |
| } |
| } |
| return ret; |
| } |
| |
| static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| u8 b = 0; |
| |
| if (onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); |
| else |
| return 0; |
| } |
| |
| static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int rc = 0; |
| |
| rc = cxusb_power_ctrl(d, onoff); |
| if (!onoff) |
| cxusb_nano2_led(d, 0); |
| |
| return rc; |
| } |
| |
| static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| u8 b; |
| |
| ret = cxusb_power_ctrl(d, onoff); |
| if (!onoff) |
| return ret; |
| |
| msleep(128); |
| cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); |
| msleep(100); |
| return ret; |
| } |
| |
| static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) |
| { |
| struct dvb_usb_device *dvbdev = adap->dev; |
| bool is_medion = dvbdev->props.devices[0].warm_ids[0] == |
| &cxusb_table[MEDION_MD95700]; |
| u8 buf[2] = { 0x03, 0x00 }; |
| |
| if (is_medion && onoff) { |
| int ret; |
| |
| ret = cxusb_medion_get(dvbdev, CXUSB_OPEN_DIGITAL); |
| if (ret != 0) |
| return ret; |
| } |
| |
| if (onoff) |
| cxusb_ctrl_msg(dvbdev, CMD_STREAMING_ON, buf, 2, NULL, 0); |
| else |
| cxusb_ctrl_msg(dvbdev, CMD_STREAMING_OFF, NULL, 0, NULL, 0); |
| |
| if (is_medion && !onoff) |
| cxusb_medion_put(dvbdev); |
| |
| return 0; |
| } |
| |
| static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) |
| { |
| if (onoff) |
| cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0); |
| else |
| cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF, |
| NULL, 0, NULL, 0); |
| return 0; |
| } |
| |
| static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) |
| { |
| int ep = d->props.generic_bulk_ctrl_endpoint; |
| const int timeout = 100; |
| const int junk_len = 32; |
| u8 *junk; |
| int rd_count; |
| |
| /* Discard remaining data in video pipe */ |
| junk = kmalloc(junk_len, GFP_KERNEL); |
| if (!junk) |
| return; |
| while (1) { |
| if (usb_bulk_msg(d->udev, |
| usb_rcvbulkpipe(d->udev, ep), |
| junk, junk_len, &rd_count, timeout) < 0) |
| break; |
| if (!rd_count) |
| break; |
| } |
| kfree(junk); |
| } |
| |
| static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) |
| { |
| struct usb_data_stream_properties *p = &d->props.adapter[0].fe[0].stream; |
| const int timeout = 100; |
| const int junk_len = p->u.bulk.buffersize; |
| u8 *junk; |
| int rd_count; |
| |
| /* Discard remaining data in video pipe */ |
| junk = kmalloc(junk_len, GFP_KERNEL); |
| if (!junk) |
| return; |
| while (1) { |
| if (usb_bulk_msg(d->udev, |
| usb_rcvbulkpipe(d->udev, p->endpoint), |
| junk, junk_len, &rd_count, timeout) < 0) |
| break; |
| if (!rd_count) |
| break; |
| } |
| kfree(junk); |
| } |
| |
| static int cxusb_d680_dmb_streaming_ctrl(struct dvb_usb_adapter *adap, |
| int onoff) |
| { |
| if (onoff) { |
| u8 buf[2] = { 0x03, 0x00 }; |
| |
| cxusb_d680_dmb_drain_video(adap->dev); |
| return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, |
| buf, sizeof(buf), NULL, 0); |
| } else { |
| int ret = cxusb_ctrl_msg(adap->dev, |
| CMD_STREAMING_OFF, NULL, 0, NULL, 0); |
| return ret; |
| } |
| } |
| |
| static int cxusb_rc_query(struct dvb_usb_device *d) |
| { |
| u8 ircode[4]; |
| |
| if (cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4) < 0) |
| return 0; |
| |
| if (ircode[2] || ircode[3]) |
| rc_keydown(d->rc_dev, RC_PROTO_NEC, |
| RC_SCANCODE_NEC(~ircode[2] & 0xff, ircode[3]), 0); |
| return 0; |
| } |
| |
| static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d) |
| { |
| u8 ircode[4]; |
| struct i2c_msg msg = { |
| .addr = 0x6b, |
| .flags = I2C_M_RD, |
| .buf = ircode, |
| .len = 4 |
| }; |
| |
| if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1) |
| return 0; |
| |
| if (ircode[1] || ircode[2]) |
| rc_keydown(d->rc_dev, RC_PROTO_NEC, |
| RC_SCANCODE_NEC(~ircode[1] & 0xff, ircode[2]), 0); |
| return 0; |
| } |
| |
| static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d) |
| { |
| u8 ircode[2]; |
| |
| if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) |
| return 0; |
| |
| if (ircode[0] || ircode[1]) |
| rc_keydown(d->rc_dev, RC_PROTO_UNKNOWN, |
| RC_SCANCODE_RC5(ircode[0], ircode[1]), 0); |
| return 0; |
| } |
| |
| static int cxusb_dee1601_demod_init(struct dvb_frontend *fe) |
| { |
| static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 }; |
| static u8 reset[] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 }; |
| static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int cxusb_mt352_demod_init(struct dvb_frontend *fe) |
| { |
| /* used in both lgz201 and th7579 */ |
| static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x29 }; |
| static u8 reset[] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg[] = { AGC_TARGET, 0x24, 0x20 }; |
| static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| return 0; |
| } |
| |
| static struct cx22702_config cxusb_cx22702_config = { |
| .demod_address = 0x63, |
| .output_mode = CX22702_PARALLEL_OUTPUT, |
| }; |
| |
| static struct lgdt330x_config cxusb_lgdt3303_config = { |
| .demod_chip = LGDT3303, |
| }; |
| |
| static struct lgdt330x_config cxusb_aver_lgdt3303_config = { |
| .demod_chip = LGDT3303, |
| .clock_polarity_flip = 2, |
| }; |
| |
| static struct mt352_config cxusb_dee1601_config = { |
| .demod_address = 0x0f, |
| .demod_init = cxusb_dee1601_demod_init, |
| }; |
| |
| static struct zl10353_config cxusb_zl10353_dee1601_config = { |
| .demod_address = 0x0f, |
| .parallel_ts = 1, |
| }; |
| |
| static struct mt352_config cxusb_mt352_config = { |
| /* used in both lgz201 and th7579 */ |
| .demod_address = 0x0f, |
| .demod_init = cxusb_mt352_demod_init, |
| }; |
| |
| static struct zl10353_config cxusb_zl10353_xc3028_config = { |
| .demod_address = 0x0f, |
| .if2 = 45600, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| }; |
| |
| static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = { |
| .demod_address = 0x0f, |
| .if2 = 45600, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| .disable_i2c_gate_ctrl = 1, |
| }; |
| |
| static struct mt352_config cxusb_mt352_xc3028_config = { |
| .demod_address = 0x0f, |
| .if2 = 4560, |
| .no_tuner = 1, |
| .demod_init = cxusb_mt352_demod_init, |
| }; |
| |
| /* FIXME: needs tweaking */ |
| static struct mxl5005s_config aver_a868r_tuner = { |
| .i2c_address = 0x63, |
| .if_freq = 6000000UL, |
| .xtal_freq = CRYSTAL_FREQ_16000000HZ, |
| .agc_mode = MXL_SINGLE_AGC, |
| .tracking_filter = MXL_TF_C, |
| .rssi_enable = MXL_RSSI_ENABLE, |
| .cap_select = MXL_CAP_SEL_ENABLE, |
| .div_out = MXL_DIV_OUT_4, |
| .clock_out = MXL_CLOCK_OUT_DISABLE, |
| .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, |
| .top = MXL5005S_TOP_25P2, |
| .mod_mode = MXL_DIGITAL_MODE, |
| .if_mode = MXL_ZERO_IF, |
| .AgcMasterByte = 0x00, |
| }; |
| |
| /* FIXME: needs tweaking */ |
| static struct mxl5005s_config d680_dmb_tuner = { |
| .i2c_address = 0x63, |
| .if_freq = 36125000UL, |
| .xtal_freq = CRYSTAL_FREQ_16000000HZ, |
| .agc_mode = MXL_SINGLE_AGC, |
| .tracking_filter = MXL_TF_C, |
| .rssi_enable = MXL_RSSI_ENABLE, |
| .cap_select = MXL_CAP_SEL_ENABLE, |
| .div_out = MXL_DIV_OUT_4, |
| .clock_out = MXL_CLOCK_OUT_DISABLE, |
| .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, |
| .top = MXL5005S_TOP_25P2, |
| .mod_mode = MXL_DIGITAL_MODE, |
| .if_mode = MXL_ZERO_IF, |
| .AgcMasterByte = 0x00, |
| }; |
| |
| static struct max2165_config mygica_d689_max2165_cfg = { |
| .i2c_address = 0x60, |
| .osc_clk = 20 |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *dvbdev = adap->dev; |
| bool is_medion = dvbdev->props.devices[0].warm_ids[0] == |
| &cxusb_table[MEDION_MD95700]; |
| |
| dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, |
| &dvbdev->i2c_adap, 0x61, |
| TUNER_PHILIPS_FMD1216ME_MK3); |
| |
| if (is_medion && adap->fe_adap[0].fe) |
| /* |
| * make sure that DVB core won't put to sleep (reset, really) |
| * tuner when we might be open in analog mode |
| */ |
| adap->fe_adap[0].fe->ops.tuner_ops.sleep = NULL; |
| |
| return 0; |
| } |
| |
| static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, |
| NULL, DVB_PLL_THOMSON_DTT7579); |
| return 0; |
| } |
| |
| static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, |
| NULL, DVB_PLL_LG_Z201); |
| return 0; |
| } |
| |
| static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, |
| NULL, DVB_PLL_THOMSON_DTT7579); |
| return 0; |
| } |
| |
| static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, |
| &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); |
| return 0; |
| } |
| |
| static int dvico_bluebird_xc2028_callback(void *ptr, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = ptr; |
| struct dvb_usb_device *d = adap->dev; |
| |
| switch (command) { |
| case XC2028_TUNER_RESET: |
| dev_info(&d->udev->dev, "XC2028_TUNER_RESET %d\n", arg); |
| cxusb_bluebird_gpio_pulse(d, 0x01, 1); |
| break; |
| case XC2028_RESET_CLK: |
| dev_info(&d->udev->dev, "XC2028_RESET_CLK %d\n", arg); |
| break; |
| case XC2028_I2C_FLUSH: |
| break; |
| default: |
| dev_info(&d->udev->dev, "unknown command %d, arg %d\n", |
| command, arg); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &adap->dev->i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_ZARLINK456, |
| }; |
| |
| /* FIXME: generalize & move to common area */ |
| adap->fe_adap[0].fe->callback = dvico_bluebird_xc2028_callback; |
| |
| fe = dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &cfg); |
| if (!fe || !fe->ops.tuner_ops.set_config) |
| return -EIO; |
| |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| |
| return 0; |
| } |
| |
| static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, |
| &adap->dev->i2c_adap, &aver_a868r_tuner); |
| return 0; |
| } |
| |
| static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_frontend *fe; |
| |
| fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, |
| &adap->dev->i2c_adap, &d680_dmb_tuner); |
| return (!fe) ? -EIO : 0; |
| } |
| |
| static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_frontend *fe; |
| |
| fe = dvb_attach(max2165_attach, adap->fe_adap[0].fe, |
| &adap->dev->i2c_adap, &mygica_d689_max2165_cfg); |
| return (!fe) ? -EIO : 0; |
| } |
| |
| static int cxusb_medion_fe_ts_bus_ctrl(struct dvb_frontend *fe, int acquire) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dvb_usb_device *dvbdev = adap->dev; |
| |
| if (acquire) |
| return cxusb_medion_get(dvbdev, CXUSB_OPEN_DIGITAL); |
| |
| cxusb_medion_put(dvbdev); |
| |
| return 0; |
| } |
| |
| static int cxusb_medion_set_mode(struct dvb_usb_device *dvbdev, bool digital) |
| { |
| struct cxusb_state *st = dvbdev->priv; |
| int ret; |
| u8 b; |
| unsigned int i; |
| |
| /* |
| * switching mode while doing an I2C transaction often causes |
| * the device to crash |
| */ |
| mutex_lock(&dvbdev->i2c_mutex); |
| |
| if (digital) { |
| ret = usb_set_interface(dvbdev->udev, 0, 6); |
| if (ret != 0) { |
| dev_err(&dvbdev->udev->dev, |
| "digital interface selection failed (%d)\n", |
| ret); |
| goto ret_unlock; |
| } |
| } else { |
| ret = usb_set_interface(dvbdev->udev, 0, 1); |
| if (ret != 0) { |
| dev_err(&dvbdev->udev->dev, |
| "analog interface selection failed (%d)\n", |
| ret); |
| goto ret_unlock; |
| } |
| } |
| |
| /* pipes need to be cleared after setting interface */ |
| ret = usb_clear_halt(dvbdev->udev, usb_rcvbulkpipe(dvbdev->udev, 1)); |
| if (ret != 0) |
| dev_warn(&dvbdev->udev->dev, |
| "clear halt on IN pipe failed (%d)\n", |
| ret); |
| |
| ret = usb_clear_halt(dvbdev->udev, usb_sndbulkpipe(dvbdev->udev, 1)); |
| if (ret != 0) |
| dev_warn(&dvbdev->udev->dev, |
| "clear halt on OUT pipe failed (%d)\n", |
| ret); |
| |
| ret = cxusb_ctrl_msg(dvbdev, digital ? CMD_DIGITAL : CMD_ANALOG, |
| NULL, 0, &b, 1); |
| if (ret != 0) { |
| dev_err(&dvbdev->udev->dev, "mode switch failed (%d)\n", |
| ret); |
| goto ret_unlock; |
| } |
| |
| /* mode switch seems to reset GPIO states */ |
| for (i = 0; i < ARRAY_SIZE(st->gpio_write_refresh); i++) |
| st->gpio_write_refresh[i] = true; |
| |
| ret_unlock: |
| mutex_unlock(&dvbdev->i2c_mutex); |
| |
| return ret; |
| } |
| |
| static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *dvbdev = adap->dev; |
| bool is_medion = dvbdev->props.devices[0].warm_ids[0] == |
| &cxusb_table[MEDION_MD95700]; |
| |
| if (is_medion) { |
| int ret; |
| |
| ret = cxusb_medion_set_mode(dvbdev, true); |
| if (ret) |
| return ret; |
| } |
| |
| adap->fe_adap[0].fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, |
| &dvbdev->i2c_adap); |
| if (!adap->fe_adap[0].fe) |
| return -EIO; |
| |
| if (is_medion) |
| adap->fe_adap[0].fe->ops.ts_bus_ctrl = |
| cxusb_medion_fe_ts_bus_ctrl; |
| |
| return 0; |
| } |
| |
| static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 7) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, |
| &cxusb_lgdt3303_config, |
| 0x0e, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, |
| &cxusb_aver_lgdt3303_config, |
| 0x0e, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| /* used in both lgz201 and th7579 */ |
| if (usb_set_interface(adap->dev->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_mt352_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| adap->fe_adap[0].fe = dvb_attach(zl10353_attach, |
| &cxusb_zl10353_dee1601_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| u8 ircode[4]; |
| int i; |
| struct i2c_msg msg = { |
| .addr = 0x6b, |
| .flags = I2C_M_RD, |
| .buf = ircode, |
| .len = 4 |
| }; |
| |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| /* reset the tuner and demodulator */ |
| cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| adap->fe_adap[0].fe = |
| dvb_attach(zl10353_attach, |
| &cxusb_zl10353_xc3028_config_no_i2c_gate, |
| &adap->dev->i2c_adap); |
| if (!adap->fe_adap[0].fe) |
| return -EIO; |
| |
| /* try to determine if there is no IR decoder on the I2C bus */ |
| for (i = 0; adap->dev->props.rc.core.rc_codes && i < 5; i++) { |
| msleep(20); |
| if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1) |
| goto no_IR; |
| if (ircode[0] == 0 && ircode[1] == 0) |
| continue; |
| if (ircode[2] + ircode[3] != 0xff) { |
| no_IR: |
| adap->dev->props.rc.core.rc_codes = NULL; |
| info("No IR receiver detected on this device."); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct dibx000_agc_config dib7070_agc_config = { |
| .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| |
| /* |
| * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 |
| */ |
| .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | |
| (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| .inv_gain = 600, |
| .time_stabiliz = 10, |
| .alpha_level = 0, |
| .thlock = 118, |
| .wbd_inv = 0, |
| .wbd_ref = 3530, |
| .wbd_sel = 1, |
| .wbd_alpha = 5, |
| .agc1_max = 65535, |
| .agc1_min = 0, |
| .agc2_max = 65535, |
| .agc2_min = 0, |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 40, |
| .agc1_pt3 = 183, |
| .agc1_slope1 = 206, |
| .agc1_slope2 = 255, |
| .agc2_pt1 = 72, |
| .agc2_pt2 = 152, |
| .agc2_slope1 = 88, |
| .agc2_slope2 = 90, |
| .alpha_mant = 17, |
| .alpha_exp = 27, |
| .beta_mant = 23, |
| .beta_exp = 51, |
| .perform_agc_softsplit = 0, |
| }; |
| |
| static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| .internal = 60000, |
| .sampling = 15000, |
| .pll_prediv = 1, |
| .pll_ratio = 20, |
| .pll_range = 3, |
| .pll_reset = 1, |
| .pll_bypass = 0, |
| .enable_refdiv = 0, |
| .bypclk_div = 0, |
| .IO_CLK_en_core = 1, |
| .ADClkSrc = 1, |
| .modulo = 2, |
| /* refsel, sel, freq_15k */ |
| .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), |
| .ifreq = (0 << 25) | 0, |
| .timf = 20452225, |
| .xtal_hz = 12000000, |
| }; |
| |
| static struct dib7000p_config cxusb_dualdig4_rev2_config = { |
| .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = 0xfcef, |
| .gpio_val = 0x0110, |
| |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }; |
| |
| struct dib0700_adapter_state { |
| int (*set_param_save)(struct dvb_frontend *fe); |
| struct dib7000p_ops dib7000p_ops; |
| }; |
| |
| static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) |
| return -ENODEV; |
| |
| if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &cxusb_dualdig4_rev2_config) < 0) { |
| pr_warn("Unable to enumerate dib7000p\n"); |
| return -ENODEV; |
| } |
| |
| adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, |
| 0x80, |
| &cxusb_dualdig4_rev2_config); |
| if (!adap->fe_adap[0].fe) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff); |
| } |
| |
| static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| return 0; |
| } |
| |
| static struct dib0070_config dib7070p_dib0070_config = { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| }; |
| |
| static int dib7070_set_param_override(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset; |
| u8 band = BAND_OF_FREQUENCY(p->frequency / 1000); |
| |
| switch (band) { |
| case BAND_VHF: |
| offset = 950; |
| break; |
| default: |
| case BAND_UHF: |
| offset = 550; |
| break; |
| } |
| |
| state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); |
| |
| return state->set_param_save(fe); |
| } |
| |
| static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c; |
| |
| /* |
| * No need to call dvb7000p_attach here, as it was called |
| * already, as frontend_attach method is called first, and |
| * tuner_attach is only called on success. |
| */ |
| tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, |
| &dib7070p_dib0070_config) == NULL) |
| return -ENODEV; |
| |
| st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; |
| adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; |
| return 0; |
| } |
| |
| static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| /* reset the tuner and demodulator */ |
| cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| adap->fe_adap[0].fe = dvb_attach(zl10353_attach, |
| &cxusb_zl10353_xc3028_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| adap->fe_adap[0].fe = dvb_attach(mt352_attach, |
| &cxusb_mt352_xc3028_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static struct lgs8gxx_config d680_lgs8gl5_cfg = { |
| .prod = LGS8GXX_PROD_LGS8GL5, |
| .demod_address = 0x19, |
| .serial_ts = 0, |
| .ts_clk_pol = 0, |
| .ts_clk_gated = 1, |
| .if_clk_freq = 30400, /* 30.4 MHz */ |
| .if_freq = 5725, /* 5.725 MHz */ |
| .if_neg_center = 0, |
| .ext_adc = 0, |
| .adc_signed = 0, |
| .if_neg_edge = 0, |
| }; |
| |
| static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap->dev; |
| int n; |
| |
| /* Select required USB configuration */ |
| if (usb_set_interface(d->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| /* Unblock all USB pipes */ |
| usb_clear_halt(d->udev, |
| usb_sndbulkpipe(d->udev, |
| d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, |
| d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, |
| d->props.adapter[0].fe[0].stream.endpoint)); |
| |
| /* Drain USB pipes to avoid hang after reboot */ |
| for (n = 0; n < 5; n++) { |
| cxusb_d680_dmb_drain_message(d); |
| cxusb_d680_dmb_drain_video(d); |
| msleep(200); |
| } |
| |
| /* Reset the tuner */ |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { |
| err("clear tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { |
| err("set tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| |
| /* Attach frontend */ |
| adap->fe_adap[0].fe = dvb_attach(lgs8gxx_attach, |
| &d680_lgs8gl5_cfg, &d->i2c_adap); |
| if (!adap->fe_adap[0].fe) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static struct atbm8830_config mygica_d689_atbm8830_cfg = { |
| .prod = ATBM8830_PROD_8830, |
| .demod_address = 0x40, |
| .serial_ts = 0, |
| .ts_sampling_edge = 1, |
| .ts_clk_gated = 0, |
| .osc_clk_freq = 30400, /* in kHz */ |
| .if_freq = 0, /* zero IF */ |
| .zif_swap_iq = 1, |
| .agc_min = 0x2E, |
| .agc_max = 0x90, |
| .agc_hold_loop = 0, |
| }; |
| |
| static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap->dev; |
| |
| /* Select required USB configuration */ |
| if (usb_set_interface(d->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| /* Unblock all USB pipes */ |
| usb_clear_halt(d->udev, |
| usb_sndbulkpipe(d->udev, |
| d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, |
| d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, |
| d->props.adapter[0].fe[0].stream.endpoint)); |
| |
| /* Reset the tuner */ |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { |
| err("clear tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { |
| err("set tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| |
| /* Attach frontend */ |
| adap->fe_adap[0].fe = dvb_attach(atbm8830_attach, |
| &mygica_d689_atbm8830_cfg, |
| &d->i2c_adap); |
| if (!adap->fe_adap[0].fe) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /* |
| * DViCO has shipped two devices with the same USB ID, but only one of them |
| * needs a firmware download. Check the device class details to see if they |
| * have non-default values to decide whether the device is actually cold or |
| * not, and forget a match if it turns out we selected the wrong device. |
| */ |
| static int bluebird_fx2_identify_state(struct usb_device *udev, |
| const struct dvb_usb_device_properties *props, |
| const struct dvb_usb_device_description **desc, |
| int *cold) |
| { |
| int wascold = *cold; |
| |
| *cold = udev->descriptor.bDeviceClass == 0xff && |
| udev->descriptor.bDeviceSubClass == 0xff && |
| udev->descriptor.bDeviceProtocol == 0xff; |
| |
| if (*cold && !wascold) |
| *desc = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * DViCO bluebird firmware needs the "warm" product ID to be patched into the |
| * firmware file before download. |
| */ |
| |
| static const int dvico_firmware_id_offsets[] = { 6638, 3204 }; |
| static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, |
| const struct firmware *fw) |
| { |
| int pos; |
| |
| for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) { |
| int idoff = dvico_firmware_id_offsets[pos]; |
| |
| if (fw->size < idoff + 4) |
| continue; |
| |
| if (fw->data[idoff] == (USB_VID_DVICO & 0xff) && |
| fw->data[idoff + 1] == USB_VID_DVICO >> 8) { |
| struct firmware new_fw; |
| u8 *new_fw_data = vmalloc(fw->size); |
| int ret; |
| |
| if (!new_fw_data) |
| return -ENOMEM; |
| |
| memcpy(new_fw_data, fw->data, fw->size); |
| new_fw.size = fw->size; |
| new_fw.data = new_fw_data; |
| |
| new_fw_data[idoff + 2] = |
| le16_to_cpu(udev->descriptor.idProduct) + 1; |
| new_fw_data[idoff + 3] = |
| le16_to_cpu(udev->descriptor.idProduct) >> 8; |
| |
| ret = usb_cypress_load_firmware(udev, &new_fw, |
| CYPRESS_FX2); |
| vfree(new_fw_data); |
| return ret; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| int cxusb_medion_get(struct dvb_usb_device *dvbdev, |
| enum cxusb_open_type open_type) |
| { |
| struct cxusb_medion_dev *cxdev = dvbdev->priv; |
| int ret = 0; |
| |
| mutex_lock(&cxdev->open_lock); |
| |
| if (WARN_ON((cxdev->open_type == CXUSB_OPEN_INIT || |
| cxdev->open_type == CXUSB_OPEN_NONE) && |
| cxdev->open_ctr != 0)) { |
| ret = -EINVAL; |
| goto ret_unlock; |
| } |
| |
| if (cxdev->open_type == CXUSB_OPEN_INIT) { |
| ret = -EAGAIN; |
| goto ret_unlock; |
| } |
| |
| if (cxdev->open_ctr == 0) { |
| if (cxdev->open_type != open_type) { |
| dev_info(&dvbdev->udev->dev, "will acquire and switch to %s\n", |
| open_type == CXUSB_OPEN_ANALOG ? |
| "analog" : "digital"); |
| |
| if (open_type == CXUSB_OPEN_ANALOG) { |
| ret = _cxusb_power_ctrl(dvbdev, 1); |
| if (ret != 0) |
| dev_warn(&dvbdev->udev->dev, |
| "powerup for analog switch failed (%d)\n", |
| ret); |
| |
| ret = cxusb_medion_set_mode(dvbdev, false); |
| if (ret != 0) |
| goto ret_unlock; |
| |
| ret = cxusb_medion_analog_init(dvbdev); |
| if (ret != 0) |
| goto ret_unlock; |
| } else { /* digital */ |
| ret = _cxusb_power_ctrl(dvbdev, 1); |
| if (ret != 0) |
| dev_warn(&dvbdev->udev->dev, |
| "powerup for digital switch failed (%d)\n", |
| ret); |
| |
| ret = cxusb_medion_set_mode(dvbdev, true); |
| if (ret != 0) |
| goto ret_unlock; |
| } |
| |
| cxdev->open_type = open_type; |
| } else { |
| dev_info(&dvbdev->udev->dev, "reacquired idle %s\n", |
| open_type == CXUSB_OPEN_ANALOG ? |
| "analog" : "digital"); |
| } |
| |
| cxdev->open_ctr = 1; |
| } else if (cxdev->open_type == open_type) { |
| cxdev->open_ctr++; |
| dev_info(&dvbdev->udev->dev, "acquired %s\n", |
| open_type == CXUSB_OPEN_ANALOG ? "analog" : "digital"); |
| } else { |
| ret = -EBUSY; |
| } |
| |
| ret_unlock: |
| mutex_unlock(&cxdev->open_lock); |
| |
| return ret; |
| } |
| |
| void cxusb_medion_put(struct dvb_usb_device *dvbdev) |
| { |
| struct cxusb_medion_dev *cxdev = dvbdev->priv; |
| |
| mutex_lock(&cxdev->open_lock); |
| |
| if (cxdev->open_type == CXUSB_OPEN_INIT) { |
| WARN_ON(cxdev->open_ctr != 0); |
| cxdev->open_type = CXUSB_OPEN_NONE; |
| goto unlock; |
| } |
| |
| if (!WARN_ON(cxdev->open_ctr < 1)) { |
| cxdev->open_ctr--; |
| |
| dev_info(&dvbdev->udev->dev, "release %s\n", |
| cxdev->open_type == CXUSB_OPEN_ANALOG ? |
| "analog" : "digital"); |
| } |
| |
| unlock: |
| mutex_unlock(&cxdev->open_lock); |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties cxusb_medion_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; |
| static struct dvb_usb_device_properties cxusb_aver_a868r_properties; |
| static struct dvb_usb_device_properties cxusb_d680_dmb_properties; |
| static struct dvb_usb_device_properties cxusb_mygica_d689_properties; |
| |
| static int cxusb_medion_priv_init(struct dvb_usb_device *dvbdev) |
| { |
| struct cxusb_medion_dev *cxdev = dvbdev->priv; |
| |
| cxdev->dvbdev = dvbdev; |
| cxdev->open_type = CXUSB_OPEN_INIT; |
| mutex_init(&cxdev->open_lock); |
| |
| return 0; |
| } |
| |
| static void cxusb_medion_priv_destroy(struct dvb_usb_device *dvbdev) |
| { |
| struct cxusb_medion_dev *cxdev = dvbdev->priv; |
| |
| mutex_destroy(&cxdev->open_lock); |
| } |
| |
| static bool cxusb_medion_check_altsetting(struct usb_host_interface *as) |
| { |
| unsigned int ctr; |
| |
| for (ctr = 0; ctr < as->desc.bNumEndpoints; ctr++) { |
| if ((as->endpoint[ctr].desc.bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK) != 2) |
| continue; |
| |
| if (as->endpoint[ctr].desc.bEndpointAddress & USB_DIR_IN && |
| ((as->endpoint[ctr].desc.bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)) |
| return true; |
| |
| break; |
| } |
| |
| return false; |
| } |
| |
| static bool cxusb_medion_check_intf(struct usb_interface *intf) |
| { |
| unsigned int ctr; |
| |
| if (intf->num_altsetting < 2) { |
| dev_err(intf->usb_dev, "no alternate interface"); |
| |
| return false; |
| } |
| |
| for (ctr = 0; ctr < intf->num_altsetting; ctr++) { |
| if (intf->altsetting[ctr].desc.bAlternateSetting != 1) |
| continue; |
| |
| if (cxusb_medion_check_altsetting(&intf->altsetting[ctr])) |
| return true; |
| |
| break; |
| } |
| |
| dev_err(intf->usb_dev, "no iso interface"); |
| |
| return false; |
| } |
| |
| static int cxusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct dvb_usb_device *dvbdev; |
| int ret; |
| |
| /* Medion 95700 */ |
| if (!dvb_usb_device_init(intf, &cxusb_medion_properties, |
| THIS_MODULE, &dvbdev, adapter_nr)) { |
| if (!cxusb_medion_check_intf(intf)) { |
| ret = -ENODEV; |
| goto ret_uninit; |
| } |
| |
| _cxusb_power_ctrl(dvbdev, 1); |
| ret = cxusb_medion_set_mode(dvbdev, false); |
| if (ret) |
| goto ret_uninit; |
| |
| ret = cxusb_medion_register_analog(dvbdev); |
| |
| cxusb_medion_set_mode(dvbdev, true); |
| _cxusb_power_ctrl(dvbdev, 0); |
| |
| if (ret != 0) |
| goto ret_uninit; |
| |
| /* release device from INIT mode to normal operation */ |
| cxusb_medion_put(dvbdev); |
| |
| return 0; |
| } else if (!dvb_usb_device_init(intf, |
| &cxusb_bluebird_lgh064f_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_dee1601_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_lgz201_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_dtt7579_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_dualdig4_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_nano2_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_nano2_needsfirmware_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, |
| &cxusb_bluebird_dualdig4_rev2_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| !dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0) |
| return 0; |
| |
| return -EINVAL; |
| |
| ret_uninit: |
| dvb_usb_device_exit(intf); |
| |
| return ret; |
| } |
| |
| static void cxusb_disconnect(struct usb_interface *intf) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| struct cxusb_state *st = d->priv; |
| struct i2c_client *client; |
| |
| if (d->props.devices[0].warm_ids[0] == &cxusb_table[MEDION_MD95700]) |
| cxusb_medion_unregister_analog(d); |
| |
| /* remove I2C client for tuner */ |
| client = st->i2c_client_tuner; |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| /* remove I2C client for demodulator */ |
| client = st->i2c_client_demod; |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| dvb_usb_device_exit(intf); |
| } |
| |
| static struct usb_device_id cxusb_table[NR__cxusb_table_index + 1] = { |
| [MEDION_MD95700] = { |
| USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) |
| }, |
| [DVICO_BLUEBIRD_LG064F_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) |
| }, |
| [DVICO_BLUEBIRD_LG064F_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) |
| }, |
| [DVICO_BLUEBIRD_DUAL_1_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) |
| }, |
| [DVICO_BLUEBIRD_DUAL_1_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) |
| }, |
| [DVICO_BLUEBIRD_LGZ201_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) |
| }, |
| [DVICO_BLUEBIRD_LGZ201_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) |
| }, |
| [DVICO_BLUEBIRD_TH7579_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) |
| }, |
| [DVICO_BLUEBIRD_TH7579_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) |
| }, |
| [DIGITALNOW_BLUEBIRD_DUAL_1_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, |
| USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) |
| }, |
| [DIGITALNOW_BLUEBIRD_DUAL_1_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, |
| USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) |
| }, |
| [DVICO_BLUEBIRD_DUAL_2_COLD] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) |
| }, |
| [DVICO_BLUEBIRD_DUAL_2_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) |
| }, |
| [DVICO_BLUEBIRD_DUAL_4] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) |
| }, |
| [DVICO_BLUEBIRD_DVB_T_NANO_2] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) |
| }, |
| [DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM] = { |
| USB_DEVICE(USB_VID_DVICO, |
| USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) |
| }, |
| [AVERMEDIA_VOLAR_A868R] = { |
| USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) |
| }, |
| [DVICO_BLUEBIRD_DUAL_4_REV_2] = { |
| USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) |
| }, |
| [CONEXANT_D680_DMB] = { |
| USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) |
| }, |
| [MYGICA_D689] = { |
| USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) |
| }, |
| {} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, cxusb_table); |
| |
| static struct dvb_usb_device_properties cxusb_medion_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_medion_dev), |
| .priv_init = cxusb_medion_priv_init, |
| .priv_destroy = cxusb_medion_priv_destroy, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_cx22702_frontend_attach, |
| .tuner_attach = cxusb_fmd1216me_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| .power_ctrl = cxusb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| "Medion MD95700 (MDUSBTV-HYBRID)", |
| { NULL }, |
| { &cxusb_table[MEDION_MD95700], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* |
| * use usb alt setting 0 for EP4 transfer (dvb-t), |
| * use usb alt setting 7 for EP2 transfer (atsc) |
| */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_lgdt3303_frontend_attach, |
| .tuner_attach = cxusb_lgh064f_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_PORTABLE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV5 USB Gold", |
| { &cxusb_table[DVICO_BLUEBIRD_LG064F_COLD], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_LG064F_WARM], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* |
| * use usb alt setting 0 for EP4 transfer (dvb-t), |
| * use usb alt setting 7 for EP2 transfer (atsc) |
| */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dee1601_frontend_attach, |
| .tuner_attach = cxusb_dee1601_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_MCE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 3, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual USB", |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_1_COLD], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_1_WARM], NULL }, |
| }, |
| { "DigitalNow DVB-T Dual USB", |
| { &cxusb_table[DIGITALNOW_BLUEBIRD_DUAL_1_COLD], NULL }, |
| { &cxusb_table[DIGITALNOW_BLUEBIRD_DUAL_1_WARM], NULL }, |
| }, |
| { "DViCO FusionHDTV DVB-T Dual Digital 2", |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_2_COLD], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_2_WARM], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* |
| * use usb alt setting 0 for EP4 transfer (dvb-t), |
| * use usb alt setting 7 for EP2 transfer (atsc) |
| */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_mt352_frontend_attach, |
| .tuner_attach = cxusb_lgz201_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_PORTABLE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T USB (LGZ201)", |
| { &cxusb_table[DVICO_BLUEBIRD_LGZ201_COLD], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_LGZ201_WARM], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| |
| /* |
| * use usb alt setting 0 for EP4 transfer (dvb-t), |
| * use usb alt setting 7 for EP2 transfer (atsc) |
| */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_mt352_frontend_attach, |
| .tuner_attach = cxusb_dtt7579_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_PORTABLE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T USB (TH7579)", |
| { &cxusb_table[DVICO_BLUEBIRD_TH7579_COLD], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_TH7579_WARM], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dualdig4_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_MCE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_bluebird2_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual Digital 4", |
| { NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_4], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| .identify_state = bluebird_fx2_identify_state, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_nano2_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_nano2_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_PORTABLE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_bluebird2_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T NANO2", |
| { NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DVB_T_NANO_2], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties |
| cxusb_bluebird_nano2_needsfirmware_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-02.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| .identify_state = bluebird_fx2_identify_state, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_nano2_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_nano2_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_PORTABLE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { { |
| "DViCO FusionHDTV DVB-T NANO2 w/o firmware", |
| { &cxusb_table[DVICO_BLUEBIRD_DVB_T_NANO_2], NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM], |
| NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_aver_streaming_ctrl, |
| .frontend_attach = cxusb_aver_lgdt3303_frontend_attach, |
| .tuner_attach = cxusb_mxl5003s_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| .power_ctrl = cxusb_aver_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "AVerMedia AVerTVHD Volar (A868R)", |
| { NULL }, |
| { &cxusb_table[AVERMEDIA_VOLAR_A868R], NULL }, |
| }, |
| } |
| }; |
| |
| static |
| struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, |
| .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_DVICO_MCE, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_NEC, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", |
| { NULL }, |
| { &cxusb_table[DVICO_BLUEBIRD_DUAL_4_REV_2], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, |
| .frontend_attach = cxusb_d680_dmb_frontend_attach, |
| .tuner_attach = cxusb_d680_dmb_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_d680_dmb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_d680_dmb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_UNKNOWN, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| "Conexant DMB-TH Stick", |
| { NULL }, |
| { &cxusb_table[CONEXANT_D680_DMB], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_mygica_d689_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, |
| .frontend_attach = cxusb_mygica_d689_frontend_attach, |
| .tuner_attach = cxusb_mygica_d689_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| } }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_d680_dmb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc.core = { |
| .rc_interval = 100, |
| .rc_codes = RC_MAP_D680_DMB, |
| .module_name = KBUILD_MODNAME, |
| .rc_query = cxusb_d680_dmb_rc_query, |
| .allowed_protos = RC_PROTO_BIT_UNKNOWN, |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| "Mygica D689 DMB-TH", |
| { NULL }, |
| { &cxusb_table[MYGICA_D689], NULL }, |
| }, |
| } |
| }; |
| |
| static struct usb_driver cxusb_driver = { |
| .name = "dvb_usb_cxusb", |
| .probe = cxusb_probe, |
| .disconnect = cxusb_disconnect, |
| .id_table = cxusb_table, |
| }; |
| |
| module_usb_driver(cxusb_driver); |
| |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>"); |
| MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); |
| MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); |
| MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>"); |
| MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); |
| MODULE_LICENSE("GPL"); |