| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * QLogic iSCSI HBA Driver |
| * Copyright (c) 2003-2013 QLogic Corporation |
| */ |
| |
| #include <linux/ratelimit.h> |
| |
| #include "ql4_def.h" |
| #include "ql4_version.h" |
| #include "ql4_glbl.h" |
| #include "ql4_dbg.h" |
| #include "ql4_inline.h" |
| |
| uint32_t qla4_83xx_rd_reg(struct scsi_qla_host *ha, ulong addr) |
| { |
| return readl((void __iomem *)(ha->nx_pcibase + addr)); |
| } |
| |
| void qla4_83xx_wr_reg(struct scsi_qla_host *ha, ulong addr, uint32_t val) |
| { |
| writel(val, (void __iomem *)(ha->nx_pcibase + addr)); |
| } |
| |
| static int qla4_83xx_set_win_base(struct scsi_qla_host *ha, uint32_t addr) |
| { |
| uint32_t val; |
| int ret_val = QLA_SUCCESS; |
| |
| qla4_83xx_wr_reg(ha, QLA83XX_CRB_WIN_FUNC(ha->func_num), addr); |
| val = qla4_83xx_rd_reg(ha, QLA83XX_CRB_WIN_FUNC(ha->func_num)); |
| if (val != addr) { |
| ql4_printk(KERN_ERR, ha, "%s: Failed to set register window : addr written 0x%x, read 0x%x!\n", |
| __func__, addr, val); |
| ret_val = QLA_ERROR; |
| } |
| |
| return ret_val; |
| } |
| |
| int qla4_83xx_rd_reg_indirect(struct scsi_qla_host *ha, uint32_t addr, |
| uint32_t *data) |
| { |
| int ret_val; |
| |
| ret_val = qla4_83xx_set_win_base(ha, addr); |
| |
| if (ret_val == QLA_SUCCESS) { |
| *data = qla4_83xx_rd_reg(ha, QLA83XX_WILDCARD); |
| } else { |
| *data = 0xffffffff; |
| ql4_printk(KERN_ERR, ha, "%s: failed read of addr 0x%x!\n", |
| __func__, addr); |
| } |
| |
| return ret_val; |
| } |
| |
| int qla4_83xx_wr_reg_indirect(struct scsi_qla_host *ha, uint32_t addr, |
| uint32_t data) |
| { |
| int ret_val; |
| |
| ret_val = qla4_83xx_set_win_base(ha, addr); |
| |
| if (ret_val == QLA_SUCCESS) |
| qla4_83xx_wr_reg(ha, QLA83XX_WILDCARD, data); |
| else |
| ql4_printk(KERN_ERR, ha, "%s: failed wrt to addr 0x%x, data 0x%x\n", |
| __func__, addr, data); |
| |
| return ret_val; |
| } |
| |
| static int qla4_83xx_flash_lock(struct scsi_qla_host *ha) |
| { |
| int lock_owner; |
| int timeout = 0; |
| uint32_t lock_status = 0; |
| int ret_val = QLA_SUCCESS; |
| |
| while (lock_status == 0) { |
| lock_status = qla4_83xx_rd_reg(ha, QLA83XX_FLASH_LOCK); |
| if (lock_status) |
| break; |
| |
| if (++timeout >= QLA83XX_FLASH_LOCK_TIMEOUT / 20) { |
| lock_owner = qla4_83xx_rd_reg(ha, |
| QLA83XX_FLASH_LOCK_ID); |
| ql4_printk(KERN_ERR, ha, "%s: flash lock by func %d failed, held by func %d\n", |
| __func__, ha->func_num, lock_owner); |
| ret_val = QLA_ERROR; |
| break; |
| } |
| msleep(20); |
| } |
| |
| qla4_83xx_wr_reg(ha, QLA83XX_FLASH_LOCK_ID, ha->func_num); |
| return ret_val; |
| } |
| |
| static void qla4_83xx_flash_unlock(struct scsi_qla_host *ha) |
| { |
| /* Reading FLASH_UNLOCK register unlocks the Flash */ |
| qla4_83xx_wr_reg(ha, QLA83XX_FLASH_LOCK_ID, 0xFF); |
| qla4_83xx_rd_reg(ha, QLA83XX_FLASH_UNLOCK); |
| } |
| |
| int qla4_83xx_flash_read_u32(struct scsi_qla_host *ha, uint32_t flash_addr, |
| uint8_t *p_data, int u32_word_count) |
| { |
| int i; |
| uint32_t u32_word; |
| uint32_t addr = flash_addr; |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla4_83xx_flash_lock(ha); |
| if (ret_val == QLA_ERROR) |
| goto exit_lock_error; |
| |
| if (addr & 0x03) { |
| ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n", |
| __func__, addr); |
| ret_val = QLA_ERROR; |
| goto exit_flash_read; |
| } |
| |
| for (i = 0; i < u32_word_count; i++) { |
| ret_val = qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_FLASH_DIRECT_WINDOW, |
| (addr & 0xFFFF0000)); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW\n!", |
| __func__, addr); |
| goto exit_flash_read; |
| } |
| |
| ret_val = qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_FLASH_DIRECT_DATA(addr), |
| &u32_word); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n", |
| __func__, addr); |
| goto exit_flash_read; |
| } |
| |
| *(__le32 *)p_data = le32_to_cpu(u32_word); |
| p_data = p_data + 4; |
| addr = addr + 4; |
| } |
| |
| exit_flash_read: |
| qla4_83xx_flash_unlock(ha); |
| |
| exit_lock_error: |
| return ret_val; |
| } |
| |
| int qla4_83xx_lockless_flash_read_u32(struct scsi_qla_host *ha, |
| uint32_t flash_addr, uint8_t *p_data, |
| int u32_word_count) |
| { |
| uint32_t i; |
| uint32_t u32_word; |
| uint32_t flash_offset; |
| uint32_t addr = flash_addr; |
| int ret_val = QLA_SUCCESS; |
| |
| flash_offset = addr & (QLA83XX_FLASH_SECTOR_SIZE - 1); |
| |
| if (addr & 0x3) { |
| ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n", |
| __func__, addr); |
| ret_val = QLA_ERROR; |
| goto exit_lockless_read; |
| } |
| |
| ret_val = qla4_83xx_wr_reg_indirect(ha, QLA83XX_FLASH_DIRECT_WINDOW, |
| addr); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| |
| /* Check if data is spread across multiple sectors */ |
| if ((flash_offset + (u32_word_count * sizeof(uint32_t))) > |
| (QLA83XX_FLASH_SECTOR_SIZE - 1)) { |
| |
| /* Multi sector read */ |
| for (i = 0; i < u32_word_count; i++) { |
| ret_val = qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_FLASH_DIRECT_DATA(addr), |
| &u32_word); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| |
| *(__le32 *)p_data = le32_to_cpu(u32_word); |
| p_data = p_data + 4; |
| addr = addr + 4; |
| flash_offset = flash_offset + 4; |
| |
| if (flash_offset > (QLA83XX_FLASH_SECTOR_SIZE - 1)) { |
| /* This write is needed once for each sector */ |
| ret_val = qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_FLASH_DIRECT_WINDOW, |
| addr); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| flash_offset = 0; |
| } |
| } |
| } else { |
| /* Single sector read */ |
| for (i = 0; i < u32_word_count; i++) { |
| ret_val = qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_FLASH_DIRECT_DATA(addr), |
| &u32_word); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n", |
| __func__, addr); |
| goto exit_lockless_read; |
| } |
| |
| *(__le32 *)p_data = le32_to_cpu(u32_word); |
| p_data = p_data + 4; |
| addr = addr + 4; |
| } |
| } |
| |
| exit_lockless_read: |
| return ret_val; |
| } |
| |
| void qla4_83xx_rom_lock_recovery(struct scsi_qla_host *ha) |
| { |
| if (qla4_83xx_flash_lock(ha)) |
| ql4_printk(KERN_INFO, ha, "%s: Resetting rom lock\n", __func__); |
| |
| /* |
| * We got the lock, or someone else is holding the lock |
| * since we are restting, forcefully unlock |
| */ |
| qla4_83xx_flash_unlock(ha); |
| } |
| |
| #define INTENT_TO_RECOVER 0x01 |
| #define PROCEED_TO_RECOVER 0x02 |
| |
| static int qla4_83xx_lock_recovery(struct scsi_qla_host *ha) |
| { |
| |
| uint32_t lock = 0, lockid; |
| int ret_val = QLA_ERROR; |
| |
| lockid = ha->isp_ops->rd_reg_direct(ha, QLA83XX_DRV_LOCKRECOVERY); |
| |
| /* Check for other Recovery in progress, go wait */ |
| if ((lockid & 0x3) != 0) |
| goto exit_lock_recovery; |
| |
| /* Intent to Recover */ |
| ha->isp_ops->wr_reg_direct(ha, QLA83XX_DRV_LOCKRECOVERY, |
| (ha->func_num << 2) | INTENT_TO_RECOVER); |
| |
| msleep(200); |
| |
| /* Check Intent to Recover is advertised */ |
| lockid = ha->isp_ops->rd_reg_direct(ha, QLA83XX_DRV_LOCKRECOVERY); |
| if ((lockid & 0x3C) != (ha->func_num << 2)) |
| goto exit_lock_recovery; |
| |
| ql4_printk(KERN_INFO, ha, "%s: IDC Lock recovery initiated for func %d\n", |
| __func__, ha->func_num); |
| |
| /* Proceed to Recover */ |
| ha->isp_ops->wr_reg_direct(ha, QLA83XX_DRV_LOCKRECOVERY, |
| (ha->func_num << 2) | PROCEED_TO_RECOVER); |
| |
| /* Force Unlock */ |
| ha->isp_ops->wr_reg_direct(ha, QLA83XX_DRV_LOCK_ID, 0xFF); |
| ha->isp_ops->rd_reg_direct(ha, QLA83XX_DRV_UNLOCK); |
| |
| /* Clear bits 0-5 in IDC_RECOVERY register*/ |
| ha->isp_ops->wr_reg_direct(ha, QLA83XX_DRV_LOCKRECOVERY, 0); |
| |
| /* Get lock */ |
| lock = ha->isp_ops->rd_reg_direct(ha, QLA83XX_DRV_LOCK); |
| if (lock) { |
| lockid = ha->isp_ops->rd_reg_direct(ha, QLA83XX_DRV_LOCK_ID); |
| lockid = ((lockid + (1 << 8)) & ~0xFF) | ha->func_num; |
| ha->isp_ops->wr_reg_direct(ha, QLA83XX_DRV_LOCK_ID, lockid); |
| ret_val = QLA_SUCCESS; |
| } |
| |
| exit_lock_recovery: |
| return ret_val; |
| } |
| |
| #define QLA83XX_DRV_LOCK_MSLEEP 200 |
| |
| int qla4_83xx_drv_lock(struct scsi_qla_host *ha) |
| { |
| int timeout = 0; |
| uint32_t status = 0; |
| int ret_val = QLA_SUCCESS; |
| uint32_t first_owner = 0; |
| uint32_t tmo_owner = 0; |
| uint32_t lock_id; |
| uint32_t func_num; |
| uint32_t lock_cnt; |
| |
| while (status == 0) { |
| status = qla4_83xx_rd_reg(ha, QLA83XX_DRV_LOCK); |
| if (status) { |
| /* Increment Counter (8-31) and update func_num (0-7) on |
| * getting a successful lock */ |
| lock_id = qla4_83xx_rd_reg(ha, QLA83XX_DRV_LOCK_ID); |
| lock_id = ((lock_id + (1 << 8)) & ~0xFF) | ha->func_num; |
| qla4_83xx_wr_reg(ha, QLA83XX_DRV_LOCK_ID, lock_id); |
| break; |
| } |
| |
| if (timeout == 0) |
| /* Save counter + ID of function holding the lock for |
| * first failure */ |
| first_owner = ha->isp_ops->rd_reg_direct(ha, |
| QLA83XX_DRV_LOCK_ID); |
| |
| if (++timeout >= |
| (QLA83XX_DRV_LOCK_TIMEOUT / QLA83XX_DRV_LOCK_MSLEEP)) { |
| tmo_owner = qla4_83xx_rd_reg(ha, QLA83XX_DRV_LOCK_ID); |
| func_num = tmo_owner & 0xFF; |
| lock_cnt = tmo_owner >> 8; |
| ql4_printk(KERN_INFO, ha, "%s: Lock by func %d failed after 2s, lock held by func %d, lock count %d, first_owner %d\n", |
| __func__, ha->func_num, func_num, lock_cnt, |
| (first_owner & 0xFF)); |
| |
| if (first_owner != tmo_owner) { |
| /* Some other driver got lock, OR same driver |
| * got lock again (counter value changed), when |
| * we were waiting for lock. |
| * Retry for another 2 sec */ |
| ql4_printk(KERN_INFO, ha, "%s: IDC lock failed for func %d\n", |
| __func__, ha->func_num); |
| timeout = 0; |
| } else { |
| /* Same driver holding lock > 2sec. |
| * Force Recovery */ |
| ret_val = qla4_83xx_lock_recovery(ha); |
| if (ret_val == QLA_SUCCESS) { |
| /* Recovered and got lock */ |
| ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d successful\n", |
| __func__, ha->func_num); |
| break; |
| } |
| /* Recovery Failed, some other function |
| * has the lock, wait for 2secs and retry */ |
| ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timeout\n", |
| __func__, ha->func_num); |
| timeout = 0; |
| } |
| } |
| msleep(QLA83XX_DRV_LOCK_MSLEEP); |
| } |
| |
| return ret_val; |
| } |
| |
| void qla4_83xx_drv_unlock(struct scsi_qla_host *ha) |
| { |
| int id; |
| |
| id = qla4_83xx_rd_reg(ha, QLA83XX_DRV_LOCK_ID); |
| |
| if ((id & 0xFF) != ha->func_num) { |
| ql4_printk(KERN_ERR, ha, "%s: IDC Unlock by %d failed, lock owner is %d\n", |
| __func__, ha->func_num, (id & 0xFF)); |
| return; |
| } |
| |
| /* Keep lock counter value, update the ha->func_num to 0xFF */ |
| qla4_83xx_wr_reg(ha, QLA83XX_DRV_LOCK_ID, (id | 0xFF)); |
| qla4_83xx_rd_reg(ha, QLA83XX_DRV_UNLOCK); |
| } |
| |
| void qla4_83xx_set_idc_dontreset(struct scsi_qla_host *ha) |
| { |
| uint32_t idc_ctrl; |
| |
| idc_ctrl = qla4_83xx_rd_reg(ha, QLA83XX_IDC_DRV_CTRL); |
| idc_ctrl |= DONTRESET_BIT0; |
| qla4_83xx_wr_reg(ha, QLA83XX_IDC_DRV_CTRL, idc_ctrl); |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__, |
| idc_ctrl)); |
| } |
| |
| void qla4_83xx_clear_idc_dontreset(struct scsi_qla_host *ha) |
| { |
| uint32_t idc_ctrl; |
| |
| idc_ctrl = qla4_83xx_rd_reg(ha, QLA83XX_IDC_DRV_CTRL); |
| idc_ctrl &= ~DONTRESET_BIT0; |
| qla4_83xx_wr_reg(ha, QLA83XX_IDC_DRV_CTRL, idc_ctrl); |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__, |
| idc_ctrl)); |
| } |
| |
| int qla4_83xx_idc_dontreset(struct scsi_qla_host *ha) |
| { |
| uint32_t idc_ctrl; |
| |
| idc_ctrl = qla4_83xx_rd_reg(ha, QLA83XX_IDC_DRV_CTRL); |
| return idc_ctrl & DONTRESET_BIT0; |
| } |
| |
| /*-------------------------IDC State Machine ---------------------*/ |
| |
| enum { |
| UNKNOWN_CLASS = 0, |
| NIC_CLASS, |
| FCOE_CLASS, |
| ISCSI_CLASS |
| }; |
| |
| struct device_info { |
| int func_num; |
| int device_type; |
| int port_num; |
| }; |
| |
| int qla4_83xx_can_perform_reset(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_active; |
| uint32_t dev_part, dev_part1, dev_part2; |
| int i; |
| struct device_info device_map[16]; |
| int func_nibble; |
| int nibble; |
| int nic_present = 0; |
| int iscsi_present = 0; |
| int iscsi_func_low = 0; |
| |
| /* Use the dev_partition register to determine the PCI function number |
| * and then check drv_active register to see which driver is loaded */ |
| dev_part1 = qla4_83xx_rd_reg(ha, |
| ha->reg_tbl[QLA8XXX_CRB_DEV_PART_INFO]); |
| dev_part2 = qla4_83xx_rd_reg(ha, QLA83XX_CRB_DEV_PART_INFO2); |
| drv_active = qla4_83xx_rd_reg(ha, ha->reg_tbl[QLA8XXX_CRB_DRV_ACTIVE]); |
| |
| /* Each function has 4 bits in dev_partition Info register, |
| * Lower 2 bits - device type, Upper 2 bits - physical port number */ |
| dev_part = dev_part1; |
| for (i = nibble = 0; i <= 15; i++, nibble++) { |
| func_nibble = dev_part & (0xF << (nibble * 4)); |
| func_nibble >>= (nibble * 4); |
| device_map[i].func_num = i; |
| device_map[i].device_type = func_nibble & 0x3; |
| device_map[i].port_num = func_nibble & 0xC; |
| |
| if (device_map[i].device_type == NIC_CLASS) { |
| if (drv_active & (1 << device_map[i].func_num)) { |
| nic_present++; |
| break; |
| } |
| } else if (device_map[i].device_type == ISCSI_CLASS) { |
| if (drv_active & (1 << device_map[i].func_num)) { |
| if (!iscsi_present || |
| (iscsi_present && |
| (iscsi_func_low > device_map[i].func_num))) |
| iscsi_func_low = device_map[i].func_num; |
| |
| iscsi_present++; |
| } |
| } |
| |
| /* For function_num[8..15] get info from dev_part2 register */ |
| if (nibble == 7) { |
| nibble = 0; |
| dev_part = dev_part2; |
| } |
| } |
| |
| /* NIC, iSCSI and FCOE are the Reset owners based on order, NIC gets |
| * precedence over iSCSI and FCOE and iSCSI over FCOE, based on drivers |
| * present. */ |
| if (!nic_present && (ha->func_num == iscsi_func_low)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: can reset - NIC not present and lower iSCSI function is %d\n", |
| __func__, ha->func_num)); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * qla4_83xx_need_reset_handler - Code to start reset sequence |
| * @ha: pointer to adapter structure |
| * |
| * Note: IDC lock must be held upon entry |
| **/ |
| void qla4_83xx_need_reset_handler(struct scsi_qla_host *ha) |
| { |
| uint32_t dev_state, drv_state, drv_active; |
| unsigned long reset_timeout, dev_init_timeout; |
| |
| ql4_printk(KERN_INFO, ha, "%s: Performing ISP error recovery\n", |
| __func__); |
| |
| if (!test_bit(AF_8XXX_RST_OWNER, &ha->flags)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: reset acknowledged\n", |
| __func__)); |
| qla4_8xxx_set_rst_ready(ha); |
| |
| /* Non-reset owners ACK Reset and wait for device INIT state |
| * as part of Reset Recovery by Reset Owner */ |
| dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); |
| |
| do { |
| if (time_after_eq(jiffies, dev_init_timeout)) { |
| ql4_printk(KERN_INFO, ha, "%s: Non Reset owner dev init timeout\n", |
| __func__); |
| break; |
| } |
| |
| ha->isp_ops->idc_unlock(ha); |
| msleep(1000); |
| ha->isp_ops->idc_lock(ha); |
| |
| dev_state = qla4_8xxx_rd_direct(ha, |
| QLA8XXX_CRB_DEV_STATE); |
| } while (dev_state == QLA8XXX_DEV_NEED_RESET); |
| } else { |
| qla4_8xxx_set_rst_ready(ha); |
| reset_timeout = jiffies + (ha->nx_reset_timeout * HZ); |
| drv_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DRV_STATE); |
| drv_active = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DRV_ACTIVE); |
| |
| ql4_printk(KERN_INFO, ha, "%s: drv_state = 0x%x, drv_active = 0x%x\n", |
| __func__, drv_state, drv_active); |
| |
| while (drv_state != drv_active) { |
| if (time_after_eq(jiffies, reset_timeout)) { |
| ql4_printk(KERN_INFO, ha, "%s: %s: RESET TIMEOUT! drv_state: 0x%08x, drv_active: 0x%08x\n", |
| __func__, DRIVER_NAME, drv_state, |
| drv_active); |
| break; |
| } |
| |
| ha->isp_ops->idc_unlock(ha); |
| msleep(1000); |
| ha->isp_ops->idc_lock(ha); |
| |
| drv_state = qla4_8xxx_rd_direct(ha, |
| QLA8XXX_CRB_DRV_STATE); |
| drv_active = qla4_8xxx_rd_direct(ha, |
| QLA8XXX_CRB_DRV_ACTIVE); |
| } |
| |
| if (drv_state != drv_active) { |
| ql4_printk(KERN_INFO, ha, "%s: Reset_owner turning off drv_active of non-acking function 0x%x\n", |
| __func__, (drv_active ^ drv_state)); |
| drv_active = drv_active & drv_state; |
| qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DRV_ACTIVE, |
| drv_active); |
| } |
| |
| clear_bit(AF_8XXX_RST_OWNER, &ha->flags); |
| /* Start Reset Recovery */ |
| qla4_8xxx_device_bootstrap(ha); |
| } |
| } |
| |
| void qla4_83xx_get_idc_param(struct scsi_qla_host *ha) |
| { |
| uint32_t idc_params, ret_val; |
| |
| ret_val = qla4_83xx_flash_read_u32(ha, QLA83XX_IDC_PARAM_ADDR, |
| (uint8_t *)&idc_params, 1); |
| if (ret_val == QLA_SUCCESS) { |
| ha->nx_dev_init_timeout = idc_params & 0xFFFF; |
| ha->nx_reset_timeout = (idc_params >> 16) & 0xFFFF; |
| } else { |
| ha->nx_dev_init_timeout = ROM_DEV_INIT_TIMEOUT; |
| ha->nx_reset_timeout = ROM_DRV_RESET_ACK_TIMEOUT; |
| } |
| |
| DEBUG2(ql4_printk(KERN_DEBUG, ha, |
| "%s: ha->nx_dev_init_timeout = %d, ha->nx_reset_timeout = %d\n", |
| __func__, ha->nx_dev_init_timeout, |
| ha->nx_reset_timeout)); |
| } |
| |
| /*-------------------------Reset Sequence Functions-----------------------*/ |
| |
| static void qla4_83xx_dump_reset_seq_hdr(struct scsi_qla_host *ha) |
| { |
| uint8_t *phdr; |
| |
| if (!ha->reset_tmplt.buff) { |
| ql4_printk(KERN_ERR, ha, "%s: Error: Invalid reset_seq_template\n", |
| __func__); |
| return; |
| } |
| |
| phdr = ha->reset_tmplt.buff; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Reset Template: 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", |
| *phdr, *(phdr+1), *(phdr+2), *(phdr+3), *(phdr+4), |
| *(phdr+5), *(phdr+6), *(phdr+7), *(phdr + 8), |
| *(phdr+9), *(phdr+10), *(phdr+11), *(phdr+12), |
| *(phdr+13), *(phdr+14), *(phdr+15))); |
| } |
| |
| static int qla4_83xx_copy_bootloader(struct scsi_qla_host *ha) |
| { |
| uint8_t *p_cache; |
| uint32_t src, count, size; |
| uint64_t dest; |
| int ret_val = QLA_SUCCESS; |
| |
| src = QLA83XX_BOOTLOADER_FLASH_ADDR; |
| dest = qla4_83xx_rd_reg(ha, QLA83XX_BOOTLOADER_ADDR); |
| size = qla4_83xx_rd_reg(ha, QLA83XX_BOOTLOADER_SIZE); |
| |
| /* 128 bit alignment check */ |
| if (size & 0xF) |
| size = (size + 16) & ~0xF; |
| |
| /* 16 byte count */ |
| count = size/16; |
| |
| p_cache = vmalloc(size); |
| if (p_cache == NULL) { |
| ql4_printk(KERN_ERR, ha, "%s: Failed to allocate memory for boot loader cache\n", |
| __func__); |
| ret_val = QLA_ERROR; |
| goto exit_copy_bootloader; |
| } |
| |
| ret_val = qla4_83xx_lockless_flash_read_u32(ha, src, p_cache, |
| size / sizeof(uint32_t)); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: Error reading firmware from flash\n", |
| __func__); |
| goto exit_copy_error; |
| } |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Read firmware from flash\n", |
| __func__)); |
| |
| /* 128 bit/16 byte write to MS memory */ |
| ret_val = qla4_8xxx_ms_mem_write_128b(ha, dest, (uint32_t *)p_cache, |
| count); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: Error writing firmware to MS\n", |
| __func__); |
| goto exit_copy_error; |
| } |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Wrote firmware size %d to MS\n", |
| __func__, size)); |
| |
| exit_copy_error: |
| vfree(p_cache); |
| |
| exit_copy_bootloader: |
| return ret_val; |
| } |
| |
| static int qla4_83xx_check_cmd_peg_status(struct scsi_qla_host *ha) |
| { |
| uint32_t val, ret_val = QLA_ERROR; |
| int retries = CRB_CMDPEG_CHECK_RETRY_COUNT; |
| |
| do { |
| val = qla4_83xx_rd_reg(ha, QLA83XX_CMDPEG_STATE); |
| if (val == PHAN_INITIALIZE_COMPLETE) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Command Peg initialization complete. State=0x%x\n", |
| __func__, val)); |
| ret_val = QLA_SUCCESS; |
| break; |
| } |
| msleep(CRB_CMDPEG_CHECK_DELAY); |
| } while (--retries); |
| |
| return ret_val; |
| } |
| |
| /** |
| * qla4_83xx_poll_reg - Poll the given CRB addr for duration msecs till |
| * value read ANDed with test_mask is equal to test_result. |
| * |
| * @ha : Pointer to adapter structure |
| * @addr : CRB register address |
| * @duration : Poll for total of "duration" msecs |
| * @test_mask : Mask value read with "test_mask" |
| * @test_result : Compare (value&test_mask) with test_result. |
| **/ |
| static int qla4_83xx_poll_reg(struct scsi_qla_host *ha, uint32_t addr, |
| int duration, uint32_t test_mask, |
| uint32_t test_result) |
| { |
| uint32_t value; |
| uint8_t retries; |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla4_83xx_rd_reg_indirect(ha, addr, &value); |
| if (ret_val == QLA_ERROR) |
| goto exit_poll_reg; |
| |
| retries = duration / 10; |
| do { |
| if ((value & test_mask) != test_result) { |
| msleep(duration / 10); |
| ret_val = qla4_83xx_rd_reg_indirect(ha, addr, &value); |
| if (ret_val == QLA_ERROR) |
| goto exit_poll_reg; |
| |
| ret_val = QLA_ERROR; |
| } else { |
| ret_val = QLA_SUCCESS; |
| break; |
| } |
| } while (retries--); |
| |
| exit_poll_reg: |
| if (ret_val == QLA_ERROR) { |
| ha->reset_tmplt.seq_error++; |
| ql4_printk(KERN_ERR, ha, "%s: Poll Failed: 0x%08x 0x%08x 0x%08x\n", |
| __func__, value, test_mask, test_result); |
| } |
| |
| return ret_val; |
| } |
| |
| static int qla4_83xx_reset_seq_checksum_test(struct scsi_qla_host *ha) |
| { |
| uint32_t sum = 0; |
| uint16_t *buff = (uint16_t *)ha->reset_tmplt.buff; |
| int u16_count = ha->reset_tmplt.hdr->size / sizeof(uint16_t); |
| int ret_val; |
| |
| while (u16_count-- > 0) |
| sum += *buff++; |
| |
| while (sum >> 16) |
| sum = (sum & 0xFFFF) + (sum >> 16); |
| |
| /* checksum of 0 indicates a valid template */ |
| if (~sum) { |
| ret_val = QLA_SUCCESS; |
| } else { |
| ql4_printk(KERN_ERR, ha, "%s: Reset seq checksum failed\n", |
| __func__); |
| ret_val = QLA_ERROR; |
| } |
| |
| return ret_val; |
| } |
| |
| /** |
| * qla4_83xx_read_reset_template - Read Reset Template from Flash |
| * @ha: Pointer to adapter structure |
| **/ |
| void qla4_83xx_read_reset_template(struct scsi_qla_host *ha) |
| { |
| uint8_t *p_buff; |
| uint32_t addr, tmplt_hdr_def_size, tmplt_hdr_size; |
| uint32_t ret_val; |
| |
| ha->reset_tmplt.seq_error = 0; |
| ha->reset_tmplt.buff = vmalloc(QLA83XX_RESTART_TEMPLATE_SIZE); |
| if (ha->reset_tmplt.buff == NULL) { |
| ql4_printk(KERN_ERR, ha, "%s: Failed to allocate reset template resources\n", |
| __func__); |
| goto exit_read_reset_template; |
| } |
| |
| p_buff = ha->reset_tmplt.buff; |
| addr = QLA83XX_RESET_TEMPLATE_ADDR; |
| |
| tmplt_hdr_def_size = sizeof(struct qla4_83xx_reset_template_hdr) / |
| sizeof(uint32_t); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Read template hdr size %d from Flash\n", |
| __func__, tmplt_hdr_def_size)); |
| |
| /* Copy template header from flash */ |
| ret_val = qla4_83xx_flash_read_u32(ha, addr, p_buff, |
| tmplt_hdr_def_size); |
| if (ret_val != QLA_SUCCESS) { |
| ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n", |
| __func__); |
| goto exit_read_template_error; |
| } |
| |
| ha->reset_tmplt.hdr = |
| (struct qla4_83xx_reset_template_hdr *)ha->reset_tmplt.buff; |
| |
| /* Validate the template header size and signature */ |
| tmplt_hdr_size = ha->reset_tmplt.hdr->hdr_size/sizeof(uint32_t); |
| if ((tmplt_hdr_size != tmplt_hdr_def_size) || |
| (ha->reset_tmplt.hdr->signature != RESET_TMPLT_HDR_SIGNATURE)) { |
| ql4_printk(KERN_ERR, ha, "%s: Template Header size %d is invalid, tmplt_hdr_def_size %d\n", |
| __func__, tmplt_hdr_size, tmplt_hdr_def_size); |
| goto exit_read_template_error; |
| } |
| |
| addr = QLA83XX_RESET_TEMPLATE_ADDR + ha->reset_tmplt.hdr->hdr_size; |
| p_buff = ha->reset_tmplt.buff + ha->reset_tmplt.hdr->hdr_size; |
| tmplt_hdr_def_size = (ha->reset_tmplt.hdr->size - |
| ha->reset_tmplt.hdr->hdr_size) / sizeof(uint32_t); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Read rest of the template size %d\n", |
| __func__, ha->reset_tmplt.hdr->size)); |
| |
| /* Copy rest of the template */ |
| ret_val = qla4_83xx_flash_read_u32(ha, addr, p_buff, |
| tmplt_hdr_def_size); |
| if (ret_val != QLA_SUCCESS) { |
| ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n", |
| __func__); |
| goto exit_read_template_error; |
| } |
| |
| /* Integrity check */ |
| if (qla4_83xx_reset_seq_checksum_test(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: Reset Seq checksum failed!\n", |
| __func__); |
| goto exit_read_template_error; |
| } |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Reset Seq checksum passed, Get stop, start and init seq offsets\n", |
| __func__)); |
| |
| /* Get STOP, START, INIT sequence offsets */ |
| ha->reset_tmplt.init_offset = ha->reset_tmplt.buff + |
| ha->reset_tmplt.hdr->init_seq_offset; |
| ha->reset_tmplt.start_offset = ha->reset_tmplt.buff + |
| ha->reset_tmplt.hdr->start_seq_offset; |
| ha->reset_tmplt.stop_offset = ha->reset_tmplt.buff + |
| ha->reset_tmplt.hdr->hdr_size; |
| qla4_83xx_dump_reset_seq_hdr(ha); |
| |
| goto exit_read_reset_template; |
| |
| exit_read_template_error: |
| vfree(ha->reset_tmplt.buff); |
| |
| exit_read_reset_template: |
| return; |
| } |
| |
| /** |
| * qla4_83xx_read_write_crb_reg - Read from raddr and write value to waddr. |
| * |
| * @ha : Pointer to adapter structure |
| * @raddr : CRB address to read from |
| * @waddr : CRB address to write to |
| **/ |
| static void qla4_83xx_read_write_crb_reg(struct scsi_qla_host *ha, |
| uint32_t raddr, uint32_t waddr) |
| { |
| uint32_t value; |
| |
| qla4_83xx_rd_reg_indirect(ha, raddr, &value); |
| qla4_83xx_wr_reg_indirect(ha, waddr, value); |
| } |
| |
| /** |
| * qla4_83xx_rmw_crb_reg - Read Modify Write crb register |
| * |
| * This function read value from raddr, AND with test_mask, |
| * Shift Left,Right/OR/XOR with values RMW header and write value to waddr. |
| * |
| * @ha : Pointer to adapter structure |
| * @raddr : CRB address to read from |
| * @waddr : CRB address to write to |
| * @p_rmw_hdr : header with shift/or/xor values. |
| **/ |
| static void qla4_83xx_rmw_crb_reg(struct scsi_qla_host *ha, uint32_t raddr, |
| uint32_t waddr, |
| struct qla4_83xx_rmw *p_rmw_hdr) |
| { |
| uint32_t value; |
| |
| if (p_rmw_hdr->index_a) |
| value = ha->reset_tmplt.array[p_rmw_hdr->index_a]; |
| else |
| qla4_83xx_rd_reg_indirect(ha, raddr, &value); |
| |
| value &= p_rmw_hdr->test_mask; |
| value <<= p_rmw_hdr->shl; |
| value >>= p_rmw_hdr->shr; |
| value |= p_rmw_hdr->or_value; |
| value ^= p_rmw_hdr->xor_value; |
| |
| qla4_83xx_wr_reg_indirect(ha, waddr, value); |
| |
| return; |
| } |
| |
| static void qla4_83xx_write_list(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| struct qla4_83xx_entry *p_entry; |
| uint32_t i; |
| |
| p_entry = (struct qla4_83xx_entry *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_wr_reg_indirect(ha, p_entry->arg1, p_entry->arg2); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| static void qla4_83xx_read_write_list(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| struct qla4_83xx_entry *p_entry; |
| uint32_t i; |
| |
| p_entry = (struct qla4_83xx_entry *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_read_write_crb_reg(ha, p_entry->arg1, p_entry->arg2); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| static void qla4_83xx_poll_list(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| struct qla4_83xx_entry *p_entry; |
| struct qla4_83xx_poll *p_poll; |
| uint32_t i; |
| uint32_t value; |
| |
| p_poll = (struct qla4_83xx_poll *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| |
| /* Entries start after 8 byte qla4_83xx_poll, poll header contains |
| * the test_mask, test_value. */ |
| p_entry = (struct qla4_83xx_entry *)((char *)p_poll + |
| sizeof(struct qla4_83xx_poll)); |
| |
| delay = (long)p_hdr->delay; |
| if (!delay) { |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_poll_reg(ha, p_entry->arg1, delay, |
| p_poll->test_mask, |
| p_poll->test_value); |
| } |
| } else { |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| if (qla4_83xx_poll_reg(ha, p_entry->arg1, delay, |
| p_poll->test_mask, |
| p_poll->test_value)) { |
| qla4_83xx_rd_reg_indirect(ha, p_entry->arg1, |
| &value); |
| qla4_83xx_rd_reg_indirect(ha, p_entry->arg2, |
| &value); |
| } |
| } |
| } |
| } |
| |
| static void qla4_83xx_poll_write_list(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| struct qla4_83xx_quad_entry *p_entry; |
| struct qla4_83xx_poll *p_poll; |
| uint32_t i; |
| |
| p_poll = (struct qla4_83xx_poll *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| p_entry = (struct qla4_83xx_quad_entry *) |
| ((char *)p_poll + sizeof(struct qla4_83xx_poll)); |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_wr_reg_indirect(ha, p_entry->dr_addr, |
| p_entry->dr_value); |
| qla4_83xx_wr_reg_indirect(ha, p_entry->ar_addr, |
| p_entry->ar_value); |
| if (delay) { |
| if (qla4_83xx_poll_reg(ha, p_entry->ar_addr, delay, |
| p_poll->test_mask, |
| p_poll->test_value)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Timeout Error: poll list, item_num %d, entry_num %d\n", |
| __func__, i, |
| ha->reset_tmplt.seq_index)); |
| } |
| } |
| } |
| } |
| |
| static void qla4_83xx_read_modify_write(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| struct qla4_83xx_entry *p_entry; |
| struct qla4_83xx_rmw *p_rmw_hdr; |
| uint32_t i; |
| |
| p_rmw_hdr = (struct qla4_83xx_rmw *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| p_entry = (struct qla4_83xx_entry *) |
| ((char *)p_rmw_hdr + sizeof(struct qla4_83xx_rmw)); |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_rmw_crb_reg(ha, p_entry->arg1, p_entry->arg2, |
| p_rmw_hdr); |
| if (p_hdr->delay) |
| udelay((uint32_t)(p_hdr->delay)); |
| } |
| } |
| |
| static void qla4_83xx_pause(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| if (p_hdr->delay) |
| mdelay((uint32_t)((long)p_hdr->delay)); |
| } |
| |
| static void qla4_83xx_poll_read_list(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| long delay; |
| int index; |
| struct qla4_83xx_quad_entry *p_entry; |
| struct qla4_83xx_poll *p_poll; |
| uint32_t i; |
| uint32_t value; |
| |
| p_poll = (struct qla4_83xx_poll *) |
| ((char *)p_hdr + sizeof(struct qla4_83xx_reset_entry_hdr)); |
| p_entry = (struct qla4_83xx_quad_entry *) |
| ((char *)p_poll + sizeof(struct qla4_83xx_poll)); |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, p_entry++) { |
| qla4_83xx_wr_reg_indirect(ha, p_entry->ar_addr, |
| p_entry->ar_value); |
| if (delay) { |
| if (qla4_83xx_poll_reg(ha, p_entry->ar_addr, delay, |
| p_poll->test_mask, |
| p_poll->test_value)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Timeout Error: poll list, Item_num %d, entry_num %d\n", |
| __func__, i, |
| ha->reset_tmplt.seq_index)); |
| } else { |
| index = ha->reset_tmplt.array_index; |
| qla4_83xx_rd_reg_indirect(ha, p_entry->dr_addr, |
| &value); |
| ha->reset_tmplt.array[index++] = value; |
| |
| if (index == QLA83XX_MAX_RESET_SEQ_ENTRIES) |
| ha->reset_tmplt.array_index = 1; |
| } |
| } |
| } |
| } |
| |
| static void qla4_83xx_seq_end(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| ha->reset_tmplt.seq_end = 1; |
| } |
| |
| static void qla4_83xx_template_end(struct scsi_qla_host *ha, |
| struct qla4_83xx_reset_entry_hdr *p_hdr) |
| { |
| ha->reset_tmplt.template_end = 1; |
| |
| if (ha->reset_tmplt.seq_error == 0) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Reset sequence completed SUCCESSFULLY.\n", |
| __func__)); |
| } else { |
| ql4_printk(KERN_ERR, ha, "%s: Reset sequence completed with some timeout errors.\n", |
| __func__); |
| } |
| } |
| |
| /** |
| * qla4_83xx_process_reset_template - Process reset template. |
| * |
| * Process all entries in reset template till entry with SEQ_END opcode, |
| * which indicates end of the reset template processing. Each entry has a |
| * Reset Entry header, entry opcode/command, with size of the entry, number |
| * of entries in sub-sequence and delay in microsecs or timeout in millisecs. |
| * |
| * @ha : Pointer to adapter structure |
| * @p_buff : Common reset entry header. |
| **/ |
| static void qla4_83xx_process_reset_template(struct scsi_qla_host *ha, |
| char *p_buff) |
| { |
| int index, entries; |
| struct qla4_83xx_reset_entry_hdr *p_hdr; |
| char *p_entry = p_buff; |
| |
| ha->reset_tmplt.seq_end = 0; |
| ha->reset_tmplt.template_end = 0; |
| entries = ha->reset_tmplt.hdr->entries; |
| index = ha->reset_tmplt.seq_index; |
| |
| for (; (!ha->reset_tmplt.seq_end) && (index < entries); index++) { |
| |
| p_hdr = (struct qla4_83xx_reset_entry_hdr *)p_entry; |
| switch (p_hdr->cmd) { |
| case OPCODE_NOP: |
| break; |
| case OPCODE_WRITE_LIST: |
| qla4_83xx_write_list(ha, p_hdr); |
| break; |
| case OPCODE_READ_WRITE_LIST: |
| qla4_83xx_read_write_list(ha, p_hdr); |
| break; |
| case OPCODE_POLL_LIST: |
| qla4_83xx_poll_list(ha, p_hdr); |
| break; |
| case OPCODE_POLL_WRITE_LIST: |
| qla4_83xx_poll_write_list(ha, p_hdr); |
| break; |
| case OPCODE_READ_MODIFY_WRITE: |
| qla4_83xx_read_modify_write(ha, p_hdr); |
| break; |
| case OPCODE_SEQ_PAUSE: |
| qla4_83xx_pause(ha, p_hdr); |
| break; |
| case OPCODE_SEQ_END: |
| qla4_83xx_seq_end(ha, p_hdr); |
| break; |
| case OPCODE_TMPL_END: |
| qla4_83xx_template_end(ha, p_hdr); |
| break; |
| case OPCODE_POLL_READ_LIST: |
| qla4_83xx_poll_read_list(ha, p_hdr); |
| break; |
| default: |
| ql4_printk(KERN_ERR, ha, "%s: Unknown command ==> 0x%04x on entry = %d\n", |
| __func__, p_hdr->cmd, index); |
| break; |
| } |
| |
| /* Set pointer to next entry in the sequence. */ |
| p_entry += p_hdr->size; |
| } |
| |
| ha->reset_tmplt.seq_index = index; |
| } |
| |
| static void qla4_83xx_process_stop_seq(struct scsi_qla_host *ha) |
| { |
| ha->reset_tmplt.seq_index = 0; |
| qla4_83xx_process_reset_template(ha, ha->reset_tmplt.stop_offset); |
| |
| if (ha->reset_tmplt.seq_end != 1) |
| ql4_printk(KERN_ERR, ha, "%s: Abrupt STOP Sub-Sequence end.\n", |
| __func__); |
| } |
| |
| static void qla4_83xx_process_start_seq(struct scsi_qla_host *ha) |
| { |
| qla4_83xx_process_reset_template(ha, ha->reset_tmplt.start_offset); |
| |
| if (ha->reset_tmplt.template_end != 1) |
| ql4_printk(KERN_ERR, ha, "%s: Abrupt START Sub-Sequence end.\n", |
| __func__); |
| } |
| |
| static void qla4_83xx_process_init_seq(struct scsi_qla_host *ha) |
| { |
| qla4_83xx_process_reset_template(ha, ha->reset_tmplt.init_offset); |
| |
| if (ha->reset_tmplt.seq_end != 1) |
| ql4_printk(KERN_ERR, ha, "%s: Abrupt INIT Sub-Sequence end.\n", |
| __func__); |
| } |
| |
| static int qla4_83xx_restart(struct scsi_qla_host *ha) |
| { |
| int ret_val = QLA_SUCCESS; |
| uint32_t idc_ctrl; |
| |
| qla4_83xx_process_stop_seq(ha); |
| |
| /* |
| * Collect minidump. |
| * If IDC_CTRL BIT1 is set, clear it on going to INIT state and |
| * don't collect minidump |
| */ |
| idc_ctrl = qla4_83xx_rd_reg(ha, QLA83XX_IDC_DRV_CTRL); |
| if (idc_ctrl & GRACEFUL_RESET_BIT1) { |
| qla4_83xx_wr_reg(ha, QLA83XX_IDC_DRV_CTRL, |
| (idc_ctrl & ~GRACEFUL_RESET_BIT1)); |
| ql4_printk(KERN_INFO, ha, "%s: Graceful RESET: Not collecting minidump\n", |
| __func__); |
| } else { |
| qla4_8xxx_get_minidump(ha); |
| } |
| |
| qla4_83xx_process_init_seq(ha); |
| |
| if (qla4_83xx_copy_bootloader(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: Copy bootloader, firmware restart failed!\n", |
| __func__); |
| ret_val = QLA_ERROR; |
| goto exit_restart; |
| } |
| |
| qla4_83xx_wr_reg(ha, QLA83XX_FW_IMAGE_VALID, QLA83XX_BOOT_FROM_FLASH); |
| qla4_83xx_process_start_seq(ha); |
| |
| exit_restart: |
| return ret_val; |
| } |
| |
| int qla4_83xx_start_firmware(struct scsi_qla_host *ha) |
| { |
| int ret_val = QLA_SUCCESS; |
| |
| ret_val = qla4_83xx_restart(ha); |
| if (ret_val == QLA_ERROR) { |
| ql4_printk(KERN_ERR, ha, "%s: Restart error\n", __func__); |
| goto exit_start_fw; |
| } else { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Restart done\n", |
| __func__)); |
| } |
| |
| ret_val = qla4_83xx_check_cmd_peg_status(ha); |
| if (ret_val == QLA_ERROR) |
| ql4_printk(KERN_ERR, ha, "%s: Peg not initialized\n", |
| __func__); |
| |
| exit_start_fw: |
| return ret_val; |
| } |
| |
| /*----------------------Interrupt Related functions ---------------------*/ |
| |
| static void qla4_83xx_disable_iocb_intrs(struct scsi_qla_host *ha) |
| { |
| if (test_and_clear_bit(AF_83XX_IOCB_INTR_ON, &ha->flags)) |
| qla4_8xxx_intr_disable(ha); |
| } |
| |
| static void qla4_83xx_disable_mbox_intrs(struct scsi_qla_host *ha) |
| { |
| uint32_t mb_int, ret; |
| |
| if (test_and_clear_bit(AF_83XX_MBOX_INTR_ON, &ha->flags)) { |
| ret = readl(&ha->qla4_83xx_reg->mbox_int); |
| mb_int = ret & ~INT_ENABLE_FW_MB; |
| writel(mb_int, &ha->qla4_83xx_reg->mbox_int); |
| writel(1, &ha->qla4_83xx_reg->leg_int_mask); |
| } |
| } |
| |
| void qla4_83xx_disable_intrs(struct scsi_qla_host *ha) |
| { |
| qla4_83xx_disable_mbox_intrs(ha); |
| qla4_83xx_disable_iocb_intrs(ha); |
| } |
| |
| static void qla4_83xx_enable_iocb_intrs(struct scsi_qla_host *ha) |
| { |
| if (!test_bit(AF_83XX_IOCB_INTR_ON, &ha->flags)) { |
| qla4_8xxx_intr_enable(ha); |
| set_bit(AF_83XX_IOCB_INTR_ON, &ha->flags); |
| } |
| } |
| |
| void qla4_83xx_enable_mbox_intrs(struct scsi_qla_host *ha) |
| { |
| uint32_t mb_int; |
| |
| if (!test_bit(AF_83XX_MBOX_INTR_ON, &ha->flags)) { |
| mb_int = INT_ENABLE_FW_MB; |
| writel(mb_int, &ha->qla4_83xx_reg->mbox_int); |
| writel(0, &ha->qla4_83xx_reg->leg_int_mask); |
| set_bit(AF_83XX_MBOX_INTR_ON, &ha->flags); |
| } |
| } |
| |
| |
| void qla4_83xx_enable_intrs(struct scsi_qla_host *ha) |
| { |
| qla4_83xx_enable_mbox_intrs(ha); |
| qla4_83xx_enable_iocb_intrs(ha); |
| } |
| |
| |
| void qla4_83xx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd, |
| int incount) |
| { |
| int i; |
| |
| /* Load all mailbox registers, except mailbox 0. */ |
| for (i = 1; i < incount; i++) |
| writel(mbx_cmd[i], &ha->qla4_83xx_reg->mailbox_in[i]); |
| |
| writel(mbx_cmd[0], &ha->qla4_83xx_reg->mailbox_in[0]); |
| |
| /* Set Host Interrupt register to 1, to tell the firmware that |
| * a mailbox command is pending. Firmware after reading the |
| * mailbox command, clears the host interrupt register */ |
| writel(HINT_MBX_INT_PENDING, &ha->qla4_83xx_reg->host_intr); |
| } |
| |
| void qla4_83xx_process_mbox_intr(struct scsi_qla_host *ha, int outcount) |
| { |
| int intr_status; |
| |
| intr_status = readl(&ha->qla4_83xx_reg->risc_intr); |
| if (intr_status) { |
| ha->mbox_status_count = outcount; |
| ha->isp_ops->interrupt_service_routine(ha, intr_status); |
| } |
| } |
| |
| /** |
| * qla4_83xx_isp_reset - Resets ISP and aborts all outstanding commands. |
| * @ha: pointer to host adapter structure. |
| **/ |
| int qla4_83xx_isp_reset(struct scsi_qla_host *ha) |
| { |
| int rval; |
| uint32_t dev_state; |
| |
| ha->isp_ops->idc_lock(ha); |
| dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE); |
| |
| if (ql4xdontresethba) |
| qla4_83xx_set_idc_dontreset(ha); |
| |
| if (dev_state == QLA8XXX_DEV_READY) { |
| /* If IDC_CTRL DONTRESETHBA_BIT0 is set dont do reset |
| * recovery */ |
| if (qla4_83xx_idc_dontreset(ha) == DONTRESET_BIT0) { |
| ql4_printk(KERN_ERR, ha, "%s: Reset recovery disabled\n", |
| __func__); |
| rval = QLA_ERROR; |
| goto exit_isp_reset; |
| } |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: HW State: NEED RESET\n", |
| __func__)); |
| qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE, |
| QLA8XXX_DEV_NEED_RESET); |
| |
| } else { |
| /* If device_state is NEED_RESET, go ahead with |
| * Reset,irrespective of ql4xdontresethba. This is to allow a |
| * non-reset-owner to force a reset. Non-reset-owner sets |
| * the IDC_CTRL BIT0 to prevent Reset-owner from doing a Reset |
| * and then forces a Reset by setting device_state to |
| * NEED_RESET. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: HW state already set to NEED_RESET\n", |
| __func__)); |
| } |
| |
| /* For ISP8324 and ISP8042, Reset owner is NIC, iSCSI or FCOE based on |
| * priority and which drivers are present. Unlike ISP8022, the function |
| * setting NEED_RESET, may not be the Reset owner. */ |
| if (qla4_83xx_can_perform_reset(ha)) |
| set_bit(AF_8XXX_RST_OWNER, &ha->flags); |
| |
| ha->isp_ops->idc_unlock(ha); |
| rval = qla4_8xxx_device_state_handler(ha); |
| |
| ha->isp_ops->idc_lock(ha); |
| qla4_8xxx_clear_rst_ready(ha); |
| exit_isp_reset: |
| ha->isp_ops->idc_unlock(ha); |
| |
| if (rval == QLA_SUCCESS) |
| clear_bit(AF_FW_RECOVERY, &ha->flags); |
| |
| return rval; |
| } |
| |
| static void qla4_83xx_dump_pause_control_regs(struct scsi_qla_host *ha) |
| { |
| u32 val = 0, val1 = 0; |
| int i; |
| |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_SRE_SHIM_CONTROL, &val); |
| DEBUG2(ql4_printk(KERN_INFO, ha, "SRE-Shim Ctrl:0x%x\n", val)); |
| |
| /* Port 0 Rx Buffer Pause Threshold Registers. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 0 Rx Buffer Pause Threshold Registers[TC7..TC0]:")); |
| for (i = 0; i < 8; i++) { |
| qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_PORT0_RXB_PAUSE_THRS + (i * 0x4), &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| /* Port 1 Rx Buffer Pause Threshold Registers. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 1 Rx Buffer Pause Threshold Registers[TC7..TC0]:")); |
| for (i = 0; i < 8; i++) { |
| qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_PORT1_RXB_PAUSE_THRS + (i * 0x4), &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| /* Port 0 RxB Traffic Class Max Cell Registers. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 0 RxB Traffic Class Max Cell Registers[3..0]:")); |
| for (i = 0; i < 4; i++) { |
| qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_PORT0_RXB_TC_MAX_CELL + (i * 0x4), &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| /* Port 1 RxB Traffic Class Max Cell Registers. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 1 RxB Traffic Class Max Cell Registers[3..0]:")); |
| for (i = 0; i < 4; i++) { |
| qla4_83xx_rd_reg_indirect(ha, |
| QLA83XX_PORT1_RXB_TC_MAX_CELL + (i * 0x4), &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| /* Port 0 RxB Rx Traffic Class Stats. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 0 RxB Rx Traffic Class Stats [TC7..TC0]")); |
| for (i = 7; i >= 0; i--) { |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT0_RXB_TC_STATS, &val); |
| val &= ~(0x7 << 29); /* Reset bits 29 to 31 */ |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_PORT0_RXB_TC_STATS, |
| (val | (i << 29))); |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT0_RXB_TC_STATS, &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| /* Port 1 RxB Rx Traffic Class Stats. */ |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "Port 1 RxB Rx Traffic Class Stats [TC7..TC0]")); |
| for (i = 7; i >= 0; i--) { |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT1_RXB_TC_STATS, &val); |
| val &= ~(0x7 << 29); /* Reset bits 29 to 31 */ |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_PORT1_RXB_TC_STATS, |
| (val | (i << 29))); |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT1_RXB_TC_STATS, &val); |
| DEBUG2(pr_info("0x%x ", val)); |
| } |
| |
| DEBUG2(pr_info("\n")); |
| |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT2_IFB_PAUSE_THRS, &val); |
| qla4_83xx_rd_reg_indirect(ha, QLA83XX_PORT3_IFB_PAUSE_THRS, &val1); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "IFB-Pause Thresholds: Port 2:0x%x, Port 3:0x%x\n", |
| val, val1)); |
| } |
| |
| static void __qla4_83xx_disable_pause(struct scsi_qla_host *ha) |
| { |
| int i; |
| |
| /* set SRE-Shim Control Register */ |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_SRE_SHIM_CONTROL, |
| QLA83XX_SET_PAUSE_VAL); |
| |
| for (i = 0; i < 8; i++) { |
| /* Port 0 Rx Buffer Pause Threshold Registers. */ |
| qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_PORT0_RXB_PAUSE_THRS + (i * 0x4), |
| QLA83XX_SET_PAUSE_VAL); |
| /* Port 1 Rx Buffer Pause Threshold Registers. */ |
| qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_PORT1_RXB_PAUSE_THRS + (i * 0x4), |
| QLA83XX_SET_PAUSE_VAL); |
| } |
| |
| for (i = 0; i < 4; i++) { |
| /* Port 0 RxB Traffic Class Max Cell Registers. */ |
| qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_PORT0_RXB_TC_MAX_CELL + (i * 0x4), |
| QLA83XX_SET_TC_MAX_CELL_VAL); |
| /* Port 1 RxB Traffic Class Max Cell Registers. */ |
| qla4_83xx_wr_reg_indirect(ha, |
| QLA83XX_PORT1_RXB_TC_MAX_CELL + (i * 0x4), |
| QLA83XX_SET_TC_MAX_CELL_VAL); |
| } |
| |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_PORT2_IFB_PAUSE_THRS, |
| QLA83XX_SET_PAUSE_VAL); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_PORT3_IFB_PAUSE_THRS, |
| QLA83XX_SET_PAUSE_VAL); |
| |
| ql4_printk(KERN_INFO, ha, "Disabled pause frames successfully.\n"); |
| } |
| |
| /** |
| * qla4_83xx_eport_init - Initialize EPort. |
| * @ha: Pointer to host adapter structure. |
| * |
| * If EPort hardware is in reset state before disabling pause, there would be |
| * serious hardware wedging issues. To prevent this perform eport init everytime |
| * before disabling pause frames. |
| **/ |
| static void qla4_83xx_eport_init(struct scsi_qla_host *ha) |
| { |
| /* Clear the 8 registers */ |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_REG, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT0, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT1, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT2, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT3, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_SRE_SHIM, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_EPG_SHIM, 0x0); |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_ETHER_PCS, 0x0); |
| |
| /* Write any value to Reset Control register */ |
| qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_CONTROL, 0xFF); |
| |
| ql4_printk(KERN_INFO, ha, "EPORT is out of reset.\n"); |
| } |
| |
| void qla4_83xx_disable_pause(struct scsi_qla_host *ha) |
| { |
| ha->isp_ops->idc_lock(ha); |
| /* Before disabling pause frames, ensure that eport is not in reset */ |
| qla4_83xx_eport_init(ha); |
| qla4_83xx_dump_pause_control_regs(ha); |
| __qla4_83xx_disable_pause(ha); |
| ha->isp_ops->idc_unlock(ha); |
| } |
| |
| /** |
| * qla4_83xx_is_detached - Check if we are marked invisible. |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4_83xx_is_detached(struct scsi_qla_host *ha) |
| { |
| uint32_t drv_active; |
| |
| drv_active = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DRV_ACTIVE); |
| |
| if (test_bit(AF_INIT_DONE, &ha->flags) && |
| !(drv_active & (1 << ha->func_num))) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: drv_active = 0x%X\n", |
| __func__, drv_active)); |
| return QLA_SUCCESS; |
| } |
| |
| return QLA_ERROR; |
| } |