| /***************************************************************************/ |
| |
| /* |
| * linux/arch/m68knommu/platform/5407/config.c |
| * |
| * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2000, Lineo (www.lineo.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <asm/machdep.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcfsim.h> |
| #include <asm/mcfuart.h> |
| |
| /***************************************************************************/ |
| |
| void coldfire_reset(void); |
| |
| extern unsigned int mcf_timervector; |
| extern unsigned int mcf_profilevector; |
| extern unsigned int mcf_timerlevel; |
| |
| /***************************************************************************/ |
| |
| static struct mcf_platform_uart m5407_uart_platform[] = { |
| { |
| .mapbase = MCF_MBAR + MCFUART_BASE1, |
| .irq = 73, |
| }, |
| { |
| .mapbase = MCF_MBAR + MCFUART_BASE2, |
| .irq = 74, |
| }, |
| { }, |
| }; |
| |
| static struct platform_device m5407_uart = { |
| .name = "mcfuart", |
| .id = 0, |
| .dev.platform_data = m5407_uart_platform, |
| }; |
| |
| static struct platform_device *m5407_devices[] __initdata = { |
| &m5407_uart, |
| }; |
| |
| /***************************************************************************/ |
| |
| static void __init m5407_uart_init_line(int line, int irq) |
| { |
| if (line == 0) { |
| writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); |
| writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); |
| mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); |
| } else if (line == 1) { |
| writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); |
| writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); |
| mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); |
| } |
| } |
| |
| static void __init m5407_uarts_init(void) |
| { |
| const int nrlines = ARRAY_SIZE(m5407_uart_platform); |
| int line; |
| |
| for (line = 0; (line < nrlines); line++) |
| m5407_uart_init_line(line, m5407_uart_platform[line].irq); |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_autovector(unsigned int vec) |
| { |
| volatile unsigned char *mbar; |
| |
| if ((vec >= 25) && (vec <= 31)) { |
| mbar = (volatile unsigned char *) MCF_MBAR; |
| vec = 0x1 << (vec - 24); |
| *(mbar + MCFSIM_AVR) |= vec; |
| mcf_setimr(mcf_getimr() & ~vec); |
| } |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_settimericr(unsigned int timer, unsigned int level) |
| { |
| volatile unsigned char *icrp; |
| unsigned int icr, imr; |
| |
| if (timer <= 2) { |
| switch (timer) { |
| case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; |
| default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; |
| } |
| |
| icrp = (volatile unsigned char *) (MCF_MBAR + icr); |
| *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; |
| mcf_setimr(mcf_getimr() & ~imr); |
| } |
| } |
| |
| /***************************************************************************/ |
| |
| void __init config_BSP(char *commandp, int size) |
| { |
| mcf_setimr(MCFSIM_IMR_MASKALL); |
| |
| #if defined(CONFIG_CLEOPATRA) |
| /* Different timer setup - to prevent device clash */ |
| mcf_timervector = 30; |
| mcf_profilevector = 31; |
| mcf_timerlevel = 6; |
| #endif |
| |
| mach_reset = coldfire_reset; |
| } |
| |
| /***************************************************************************/ |
| |
| static int __init init_BSP(void) |
| { |
| m5407_uarts_init(); |
| platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices)); |
| return 0; |
| } |
| |
| arch_initcall(init_BSP); |
| |
| /***************************************************************************/ |