| /* |
| * Copyright (c) 2009 Nuvoton technology corporation. |
| * |
| * Wan ZongShun <mcuos.com@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation;version 2 of the License. |
| * |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/types.h> |
| #include <linux/watchdog.h> |
| #include <linux/uaccess.h> |
| |
| #define REG_WTCR 0x1c |
| #define WTCLK (0x01 << 10) |
| #define WTE (0x01 << 7) /*wdt enable*/ |
| #define WTIS (0x03 << 4) |
| #define WTIF (0x01 << 3) |
| #define WTRF (0x01 << 2) |
| #define WTRE (0x01 << 1) |
| #define WTR (0x01 << 0) |
| /* |
| * The watchdog time interval can be calculated via following formula: |
| * WTIS real time interval (formula) |
| * 0x00 ((2^ 14 ) * ((external crystal freq) / 256))seconds |
| * 0x01 ((2^ 16 ) * ((external crystal freq) / 256))seconds |
| * 0x02 ((2^ 18 ) * ((external crystal freq) / 256))seconds |
| * 0x03 ((2^ 20 ) * ((external crystal freq) / 256))seconds |
| * |
| * The external crystal freq is 15Mhz in the nuc900 evaluation board. |
| * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds, |
| * 0x03 = +- 16.92 seconds.. |
| */ |
| #define WDT_HW_TIMEOUT 0x02 |
| #define WDT_TIMEOUT (HZ/2) |
| #define WDT_HEARTBEAT 15 |
| |
| static int heartbeat = WDT_HEARTBEAT; |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " |
| "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " |
| "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| struct nuc900_wdt { |
| struct clk *wdt_clock; |
| struct platform_device *pdev; |
| void __iomem *wdt_base; |
| char expect_close; |
| struct timer_list timer; |
| spinlock_t wdt_lock; |
| unsigned long next_heartbeat; |
| }; |
| |
| static unsigned long nuc900wdt_busy; |
| static struct nuc900_wdt *nuc900_wdt; |
| |
| static inline void nuc900_wdt_keepalive(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&nuc900_wdt->wdt_lock); |
| |
| val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); |
| val |= (WTR | WTIF); |
| __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); |
| |
| spin_unlock(&nuc900_wdt->wdt_lock); |
| } |
| |
| static inline void nuc900_wdt_start(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&nuc900_wdt->wdt_lock); |
| |
| val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); |
| val |= (WTRE | WTE | WTR | WTCLK | WTIF); |
| val &= ~WTIS; |
| val |= (WDT_HW_TIMEOUT << 0x04); |
| __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); |
| |
| spin_unlock(&nuc900_wdt->wdt_lock); |
| |
| nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ; |
| mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT); |
| } |
| |
| static inline void nuc900_wdt_stop(void) |
| { |
| unsigned int val; |
| |
| del_timer(&nuc900_wdt->timer); |
| |
| spin_lock(&nuc900_wdt->wdt_lock); |
| |
| val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); |
| val &= ~WTE; |
| __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); |
| |
| spin_unlock(&nuc900_wdt->wdt_lock); |
| } |
| |
| static inline void nuc900_wdt_ping(void) |
| { |
| nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ; |
| } |
| |
| static int nuc900_wdt_open(struct inode *inode, struct file *file) |
| { |
| |
| if (test_and_set_bit(0, &nuc900wdt_busy)) |
| return -EBUSY; |
| |
| nuc900_wdt_start(); |
| |
| return stream_open(inode, file); |
| } |
| |
| static int nuc900_wdt_close(struct inode *inode, struct file *file) |
| { |
| if (nuc900_wdt->expect_close == 42) |
| nuc900_wdt_stop(); |
| else { |
| dev_crit(&nuc900_wdt->pdev->dev, |
| "Unexpected close, not stopping watchdog!\n"); |
| nuc900_wdt_ping(); |
| } |
| |
| nuc900_wdt->expect_close = 0; |
| clear_bit(0, &nuc900wdt_busy); |
| return 0; |
| } |
| |
| static const struct watchdog_info nuc900_wdt_info = { |
| .identity = "nuc900 watchdog", |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| }; |
| |
| static long nuc900_wdt_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| int new_value; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &nuc900_wdt_info, |
| sizeof(nuc900_wdt_info)) ? -EFAULT : 0; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_KEEPALIVE: |
| nuc900_wdt_ping(); |
| return 0; |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_value, p)) |
| return -EFAULT; |
| |
| heartbeat = new_value; |
| nuc900_wdt_ping(); |
| |
| return put_user(new_value, p); |
| case WDIOC_GETTIMEOUT: |
| return put_user(heartbeat, p); |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| static ssize_t nuc900_wdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| if (!len) |
| return 0; |
| |
| /* Scan for magic character */ |
| if (!nowayout) { |
| size_t i; |
| |
| nuc900_wdt->expect_close = 0; |
| |
| for (i = 0; i < len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') { |
| nuc900_wdt->expect_close = 42; |
| break; |
| } |
| } |
| } |
| |
| nuc900_wdt_ping(); |
| return len; |
| } |
| |
| static void nuc900_wdt_timer_ping(struct timer_list *unused) |
| { |
| if (time_before(jiffies, nuc900_wdt->next_heartbeat)) { |
| nuc900_wdt_keepalive(); |
| mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT); |
| } else |
| dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n"); |
| } |
| |
| static const struct file_operations nuc900wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .unlocked_ioctl = nuc900_wdt_ioctl, |
| .open = nuc900_wdt_open, |
| .release = nuc900_wdt_close, |
| .write = nuc900_wdt_write, |
| }; |
| |
| static struct miscdevice nuc900wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &nuc900wdt_fops, |
| }; |
| |
| static int nuc900wdt_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| |
| nuc900_wdt = devm_kzalloc(&pdev->dev, sizeof(*nuc900_wdt), |
| GFP_KERNEL); |
| if (!nuc900_wdt) |
| return -ENOMEM; |
| |
| nuc900_wdt->pdev = pdev; |
| |
| spin_lock_init(&nuc900_wdt->wdt_lock); |
| |
| nuc900_wdt->wdt_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(nuc900_wdt->wdt_base)) |
| return PTR_ERR(nuc900_wdt->wdt_base); |
| |
| nuc900_wdt->wdt_clock = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(nuc900_wdt->wdt_clock)) { |
| dev_err(&pdev->dev, "failed to find watchdog clock source\n"); |
| return PTR_ERR(nuc900_wdt->wdt_clock); |
| } |
| |
| clk_enable(nuc900_wdt->wdt_clock); |
| |
| timer_setup(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0); |
| |
| ret = misc_register(&nuc900wdt_miscdev); |
| if (ret) { |
| dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto err_clk; |
| } |
| |
| return 0; |
| |
| err_clk: |
| clk_disable(nuc900_wdt->wdt_clock); |
| return ret; |
| } |
| |
| static int nuc900wdt_remove(struct platform_device *pdev) |
| { |
| misc_deregister(&nuc900wdt_miscdev); |
| |
| clk_disable(nuc900_wdt->wdt_clock); |
| |
| return 0; |
| } |
| |
| static struct platform_driver nuc900wdt_driver = { |
| .probe = nuc900wdt_probe, |
| .remove = nuc900wdt_remove, |
| .driver = { |
| .name = "nuc900-wdt", |
| }, |
| }; |
| |
| module_platform_driver(nuc900wdt_driver); |
| |
| MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); |
| MODULE_DESCRIPTION("Watchdog driver for NUC900"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:nuc900-wdt"); |