| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Socionext UniPhier SoC AHCI glue layer |
| |
| maintainers: |
| - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
| |
| description: |+ |
| AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband |
| logic handling signals to AHCI host controller inside AHCI component. |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - socionext,uniphier-pro4-ahci-glue |
| - socionext,uniphier-pxs2-ahci-glue |
| - socionext,uniphier-pxs3-ahci-glue |
| - const: simple-mfd |
| |
| reg: |
| maxItems: 1 |
| |
| "#address-cells": |
| const: 1 |
| |
| "#size-cells": |
| const: 1 |
| |
| ranges: true |
| |
| patternProperties: |
| "^reset-controller@[0-9a-f]+$": |
| $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# |
| |
| "phy@[0-9a-f]+$": |
| $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml# |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| sata-controller@65700000 { |
| compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd"; |
| reg = <0x65b00000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x65700000 0x100>; |
| |
| reset-controller@0 { |
| compatible = "socionext,uniphier-pxs3-ahci-reset"; |
| reg = <0x0 0x4>; |
| clock-names = "link"; |
| clocks = <&sys_clk 28>; |
| reset-names = "link"; |
| resets = <&sys_rst 28>; |
| #reset-cells = <1>; |
| }; |
| |
| phy@10 { |
| compatible = "socionext,uniphier-pxs3-ahci-phy"; |
| reg = <0x10 0x10>; |
| clock-names = "link", "phy"; |
| clocks = <&sys_clk 28>, <&sys_clk 30>; |
| reset-names = "link", "phy"; |
| resets = <&sys_rst 28>, <&sys_rst 30>; |
| #phy-cells = <0>; |
| }; |
| }; |
