| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/uaccess.h> |
| #include <linux/syscalls.h> |
| |
| #include <asm/ucontext.h> |
| #include <asm/fpu/signal.h> |
| #include <asm/sighandling.h> |
| |
| #include <asm/syscall.h> |
| #include <asm/sigframe.h> |
| #include <asm/signal.h> |
| |
| /* |
| * If regs->ss will cause an IRET fault, change it. Otherwise leave it |
| * alone. Using this generally makes no sense unless |
| * user_64bit_mode(regs) would return true. |
| */ |
| static void force_valid_ss(struct pt_regs *regs) |
| { |
| u32 ar; |
| asm volatile ("lar %[old_ss], %[ar]\n\t" |
| "jz 1f\n\t" /* If invalid: */ |
| "xorl %[ar], %[ar]\n\t" /* set ar = 0 */ |
| "1:" |
| : [ar] "=r" (ar) |
| : [old_ss] "rm" ((u16)regs->ss)); |
| |
| /* |
| * For a valid 64-bit user context, we need DPL 3, type |
| * read-write data or read-write exp-down data, and S and P |
| * set. We can't use VERW because VERW doesn't check the |
| * P bit. |
| */ |
| ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK; |
| if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) && |
| ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN)) |
| regs->ss = __USER_DS; |
| } |
| |
| static bool restore_sigcontext(struct pt_regs *regs, |
| struct sigcontext __user *usc, |
| unsigned long uc_flags) |
| { |
| struct sigcontext sc; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current->restart_block.fn = do_no_restart_syscall; |
| |
| if (copy_from_user(&sc, usc, offsetof(struct sigcontext, reserved1))) |
| return false; |
| |
| regs->bx = sc.bx; |
| regs->cx = sc.cx; |
| regs->dx = sc.dx; |
| regs->si = sc.si; |
| regs->di = sc.di; |
| regs->bp = sc.bp; |
| regs->ax = sc.ax; |
| regs->sp = sc.sp; |
| regs->ip = sc.ip; |
| regs->r8 = sc.r8; |
| regs->r9 = sc.r9; |
| regs->r10 = sc.r10; |
| regs->r11 = sc.r11; |
| regs->r12 = sc.r12; |
| regs->r13 = sc.r13; |
| regs->r14 = sc.r14; |
| regs->r15 = sc.r15; |
| |
| /* Get CS/SS and force CPL3 */ |
| regs->cs = sc.cs | 0x03; |
| regs->ss = sc.ss | 0x03; |
| |
| regs->flags = (regs->flags & ~FIX_EFLAGS) | (sc.flags & FIX_EFLAGS); |
| /* disable syscall checks */ |
| regs->orig_ax = -1; |
| |
| /* |
| * Fix up SS if needed for the benefit of old DOSEMU and |
| * CRIU. |
| */ |
| if (unlikely(!(uc_flags & UC_STRICT_RESTORE_SS) && user_64bit_mode(regs))) |
| force_valid_ss(regs); |
| |
| return fpu__restore_sig((void __user *)sc.fpstate, 0); |
| } |
| |
| static __always_inline int |
| __unsafe_setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate, |
| struct pt_regs *regs, unsigned long mask) |
| { |
| unsafe_put_user(regs->di, &sc->di, Efault); |
| unsafe_put_user(regs->si, &sc->si, Efault); |
| unsafe_put_user(regs->bp, &sc->bp, Efault); |
| unsafe_put_user(regs->sp, &sc->sp, Efault); |
| unsafe_put_user(regs->bx, &sc->bx, Efault); |
| unsafe_put_user(regs->dx, &sc->dx, Efault); |
| unsafe_put_user(regs->cx, &sc->cx, Efault); |
| unsafe_put_user(regs->ax, &sc->ax, Efault); |
| unsafe_put_user(regs->r8, &sc->r8, Efault); |
| unsafe_put_user(regs->r9, &sc->r9, Efault); |
| unsafe_put_user(regs->r10, &sc->r10, Efault); |
| unsafe_put_user(regs->r11, &sc->r11, Efault); |
| unsafe_put_user(regs->r12, &sc->r12, Efault); |
| unsafe_put_user(regs->r13, &sc->r13, Efault); |
| unsafe_put_user(regs->r14, &sc->r14, Efault); |
| unsafe_put_user(regs->r15, &sc->r15, Efault); |
| |
| unsafe_put_user(current->thread.trap_nr, &sc->trapno, Efault); |
| unsafe_put_user(current->thread.error_code, &sc->err, Efault); |
| unsafe_put_user(regs->ip, &sc->ip, Efault); |
| unsafe_put_user(regs->flags, &sc->flags, Efault); |
| unsafe_put_user(regs->cs, &sc->cs, Efault); |
| unsafe_put_user(0, &sc->gs, Efault); |
| unsafe_put_user(0, &sc->fs, Efault); |
| unsafe_put_user(regs->ss, &sc->ss, Efault); |
| |
| unsafe_put_user(fpstate, (unsigned long __user *)&sc->fpstate, Efault); |
| |
| /* non-iBCS2 extensions.. */ |
| unsafe_put_user(mask, &sc->oldmask, Efault); |
| unsafe_put_user(current->thread.cr2, &sc->cr2, Efault); |
| return 0; |
| Efault: |
| return -EFAULT; |
| } |
| |
| #define unsafe_put_sigcontext(sc, fp, regs, set, label) \ |
| do { \ |
| if (__unsafe_setup_sigcontext(sc, fp, regs, set->sig[0])) \ |
| goto label; \ |
| } while(0); |
| |
| #define unsafe_put_sigmask(set, frame, label) \ |
| unsafe_put_user(*(__u64 *)(set), \ |
| (__u64 __user *)&(frame)->uc.uc_sigmask, \ |
| label) |
| |
| static unsigned long frame_uc_flags(struct pt_regs *regs) |
| { |
| unsigned long flags; |
| |
| if (boot_cpu_has(X86_FEATURE_XSAVE)) |
| flags = UC_FP_XSTATE | UC_SIGCONTEXT_SS; |
| else |
| flags = UC_SIGCONTEXT_SS; |
| |
| if (likely(user_64bit_mode(regs))) |
| flags |= UC_STRICT_RESTORE_SS; |
| |
| return flags; |
| } |
| |
| int x64_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| sigset_t *set = sigmask_to_save(); |
| struct rt_sigframe __user *frame; |
| void __user *fp = NULL; |
| unsigned long uc_flags; |
| |
| /* x86-64 should always use SA_RESTORER. */ |
| if (!(ksig->ka.sa.sa_flags & SA_RESTORER)) |
| return -EFAULT; |
| |
| frame = get_sigframe(ksig, regs, sizeof(struct rt_sigframe), &fp); |
| uc_flags = frame_uc_flags(regs); |
| |
| if (!user_access_begin(frame, sizeof(*frame))) |
| return -EFAULT; |
| |
| /* Create the ucontext. */ |
| unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault); |
| unsafe_put_user(0, &frame->uc.uc_link, Efault); |
| unsafe_save_altstack(&frame->uc.uc_stack, regs->sp, Efault); |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| unsafe_put_user(ksig->ka.sa.sa_restorer, &frame->pretcode, Efault); |
| unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault); |
| unsafe_put_sigmask(set, frame, Efault); |
| user_access_end(); |
| |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) { |
| if (copy_siginfo_to_user(&frame->info, &ksig->info)) |
| return -EFAULT; |
| } |
| |
| if (setup_signal_shadow_stack(ksig)) |
| return -EFAULT; |
| |
| /* Set up registers for signal handler */ |
| regs->di = ksig->sig; |
| /* In case the signal handler was declared without prototypes */ |
| regs->ax = 0; |
| |
| /* This also works for non SA_SIGINFO handlers because they expect the |
| next argument after the signal number on the stack. */ |
| regs->si = (unsigned long)&frame->info; |
| regs->dx = (unsigned long)&frame->uc; |
| regs->ip = (unsigned long) ksig->ka.sa.sa_handler; |
| |
| regs->sp = (unsigned long)frame; |
| |
| /* |
| * Set up the CS and SS registers to run signal handlers in |
| * 64-bit mode, even if the handler happens to be interrupting |
| * 32-bit or 16-bit code. |
| * |
| * SS is subtle. In 64-bit mode, we don't need any particular |
| * SS descriptor, but we do need SS to be valid. It's possible |
| * that the old SS is entirely bogus -- this can happen if the |
| * signal we're trying to deliver is #GP or #SS caused by a bad |
| * SS value. We also have a compatibility issue here: DOSEMU |
| * relies on the contents of the SS register indicating the |
| * SS value at the time of the signal, even though that code in |
| * DOSEMU predates sigreturn's ability to restore SS. (DOSEMU |
| * avoids relying on sigreturn to restore SS; instead it uses |
| * a trampoline.) So we do our best: if the old SS was valid, |
| * we keep it. Otherwise we replace it. |
| */ |
| regs->cs = __USER_CS; |
| |
| if (unlikely(regs->ss != __USER_DS)) |
| force_valid_ss(regs); |
| |
| return 0; |
| |
| Efault: |
| user_access_end(); |
| return -EFAULT; |
| } |
| |
| /* |
| * Do a signal return; undo the signal stack. |
| */ |
| SYSCALL_DEFINE0(rt_sigreturn) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| struct rt_sigframe __user *frame; |
| sigset_t set; |
| unsigned long uc_flags; |
| |
| frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long)); |
| if (!access_ok(frame, sizeof(*frame))) |
| goto badframe; |
| if (__get_user(*(__u64 *)&set, (__u64 __user *)&frame->uc.uc_sigmask)) |
| goto badframe; |
| if (__get_user(uc_flags, &frame->uc.uc_flags)) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags)) |
| goto badframe; |
| |
| if (restore_signal_shadow_stack()) |
| goto badframe; |
| |
| if (restore_altstack(&frame->uc.uc_stack)) |
| goto badframe; |
| |
| return regs->ax; |
| |
| badframe: |
| signal_fault(regs, frame, "rt_sigreturn"); |
| return 0; |
| } |
| |
| #ifdef CONFIG_X86_X32_ABI |
| static int x32_copy_siginfo_to_user(struct compat_siginfo __user *to, |
| const struct kernel_siginfo *from) |
| { |
| struct compat_siginfo new; |
| |
| copy_siginfo_to_external32(&new, from); |
| if (from->si_signo == SIGCHLD) { |
| new._sifields._sigchld_x32._utime = from->si_utime; |
| new._sifields._sigchld_x32._stime = from->si_stime; |
| } |
| if (copy_to_user(to, &new, sizeof(struct compat_siginfo))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| int copy_siginfo_to_user32(struct compat_siginfo __user *to, |
| const struct kernel_siginfo *from) |
| { |
| if (in_x32_syscall()) |
| return x32_copy_siginfo_to_user(to, from); |
| return __copy_siginfo_to_user32(to, from); |
| } |
| |
| int x32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| compat_sigset_t *set = (compat_sigset_t *) sigmask_to_save(); |
| struct rt_sigframe_x32 __user *frame; |
| unsigned long uc_flags; |
| void __user *restorer; |
| void __user *fp = NULL; |
| |
| if (!(ksig->ka.sa.sa_flags & SA_RESTORER)) |
| return -EFAULT; |
| |
| frame = get_sigframe(ksig, regs, sizeof(*frame), &fp); |
| |
| uc_flags = frame_uc_flags(regs); |
| |
| if (!user_access_begin(frame, sizeof(*frame))) |
| return -EFAULT; |
| |
| /* Create the ucontext. */ |
| unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault); |
| unsafe_put_user(0, &frame->uc.uc_link, Efault); |
| unsafe_compat_save_altstack(&frame->uc.uc_stack, regs->sp, Efault); |
| unsafe_put_user(0, &frame->uc.uc__pad0, Efault); |
| restorer = ksig->ka.sa.sa_restorer; |
| unsafe_put_user(restorer, (unsigned long __user *)&frame->pretcode, Efault); |
| unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault); |
| unsafe_put_sigmask(set, frame, Efault); |
| user_access_end(); |
| |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) { |
| if (x32_copy_siginfo_to_user(&frame->info, &ksig->info)) |
| return -EFAULT; |
| } |
| |
| /* Set up registers for signal handler */ |
| regs->sp = (unsigned long) frame; |
| regs->ip = (unsigned long) ksig->ka.sa.sa_handler; |
| |
| /* We use the x32 calling convention here... */ |
| regs->di = ksig->sig; |
| regs->si = (unsigned long) &frame->info; |
| regs->dx = (unsigned long) &frame->uc; |
| |
| loadsegment(ds, __USER_DS); |
| loadsegment(es, __USER_DS); |
| |
| regs->cs = __USER_CS; |
| regs->ss = __USER_DS; |
| |
| return 0; |
| |
| Efault: |
| user_access_end(); |
| return -EFAULT; |
| } |
| |
| COMPAT_SYSCALL_DEFINE0(x32_rt_sigreturn) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| struct rt_sigframe_x32 __user *frame; |
| sigset_t set; |
| unsigned long uc_flags; |
| |
| frame = (struct rt_sigframe_x32 __user *)(regs->sp - 8); |
| |
| if (!access_ok(frame, sizeof(*frame))) |
| goto badframe; |
| if (__get_user(set.sig[0], (__u64 __user *)&frame->uc.uc_sigmask)) |
| goto badframe; |
| if (__get_user(uc_flags, &frame->uc.uc_flags)) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags)) |
| goto badframe; |
| |
| if (compat_restore_altstack(&frame->uc.uc_stack)) |
| goto badframe; |
| |
| return regs->ax; |
| |
| badframe: |
| signal_fault(regs, frame, "x32 rt_sigreturn"); |
| return 0; |
| } |
| #endif /* CONFIG_X86_X32_ABI */ |
| |
| #ifdef CONFIG_COMPAT |
| void sigaction_compat_abi(struct k_sigaction *act, struct k_sigaction *oact) |
| { |
| if (!act) |
| return; |
| |
| if (in_ia32_syscall()) |
| act->sa.sa_flags |= SA_IA32_ABI; |
| if (in_x32_syscall()) |
| act->sa.sa_flags |= SA_X32_ABI; |
| } |
| #endif /* CONFIG_COMPAT */ |
| |
| /* |
| * If adding a new si_code, there is probably new data in |
| * the siginfo. Make sure folks bumping the si_code |
| * limits also have to look at this code. Make sure any |
| * new fields are handled in copy_siginfo_to_user32()! |
| */ |
| static_assert(NSIGILL == 11); |
| static_assert(NSIGFPE == 15); |
| static_assert(NSIGSEGV == 10); |
| static_assert(NSIGBUS == 5); |
| static_assert(NSIGTRAP == 6); |
| static_assert(NSIGCHLD == 6); |
| static_assert(NSIGSYS == 2); |
| |
| /* This is part of the ABI and can never change in size: */ |
| static_assert(sizeof(siginfo_t) == 128); |
| |
| /* This is a part of the ABI and can never change in alignment */ |
| static_assert(__alignof__(siginfo_t) == 8); |
| |
| /* |
| * The offsets of all the (unioned) si_fields are fixed |
| * in the ABI, of course. Make sure none of them ever |
| * move and are always at the beginning: |
| */ |
| static_assert(offsetof(siginfo_t, si_signo) == 0); |
| static_assert(offsetof(siginfo_t, si_errno) == 4); |
| static_assert(offsetof(siginfo_t, si_code) == 8); |
| |
| /* |
| * Ensure that the size of each si_field never changes. |
| * If it does, it is a sign that the |
| * copy_siginfo_to_user32() code below needs to updated |
| * along with the size in the CHECK_SI_SIZE(). |
| * |
| * We repeat this check for both the generic and compat |
| * siginfos. |
| * |
| * Note: it is OK for these to grow as long as the whole |
| * structure stays within the padding size (checked |
| * above). |
| */ |
| |
| #define CHECK_SI_OFFSET(name) \ |
| static_assert(offsetof(siginfo_t, _sifields) == \ |
| offsetof(siginfo_t, _sifields.name)) |
| #define CHECK_SI_SIZE(name, size) \ |
| static_assert(sizeof_field(siginfo_t, _sifields.name) == size) |
| |
| CHECK_SI_OFFSET(_kill); |
| CHECK_SI_SIZE (_kill, 2*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_pid) == 0x10); |
| static_assert(offsetof(siginfo_t, si_uid) == 0x14); |
| |
| CHECK_SI_OFFSET(_timer); |
| CHECK_SI_SIZE (_timer, 6*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_tid) == 0x10); |
| static_assert(offsetof(siginfo_t, si_overrun) == 0x14); |
| static_assert(offsetof(siginfo_t, si_value) == 0x18); |
| |
| CHECK_SI_OFFSET(_rt); |
| CHECK_SI_SIZE (_rt, 4*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_pid) == 0x10); |
| static_assert(offsetof(siginfo_t, si_uid) == 0x14); |
| static_assert(offsetof(siginfo_t, si_value) == 0x18); |
| |
| CHECK_SI_OFFSET(_sigchld); |
| CHECK_SI_SIZE (_sigchld, 8*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_pid) == 0x10); |
| static_assert(offsetof(siginfo_t, si_uid) == 0x14); |
| static_assert(offsetof(siginfo_t, si_status) == 0x18); |
| static_assert(offsetof(siginfo_t, si_utime) == 0x20); |
| static_assert(offsetof(siginfo_t, si_stime) == 0x28); |
| |
| #ifdef CONFIG_X86_X32_ABI |
| /* no _sigchld_x32 in the generic siginfo_t */ |
| static_assert(sizeof_field(compat_siginfo_t, _sifields._sigchld_x32) == |
| 7*sizeof(int)); |
| static_assert(offsetof(compat_siginfo_t, _sifields) == |
| offsetof(compat_siginfo_t, _sifields._sigchld_x32)); |
| static_assert(offsetof(compat_siginfo_t, _sifields._sigchld_x32._utime) == 0x18); |
| static_assert(offsetof(compat_siginfo_t, _sifields._sigchld_x32._stime) == 0x20); |
| #endif |
| |
| CHECK_SI_OFFSET(_sigfault); |
| CHECK_SI_SIZE (_sigfault, 8*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_addr) == 0x10); |
| |
| static_assert(offsetof(siginfo_t, si_trapno) == 0x18); |
| |
| static_assert(offsetof(siginfo_t, si_addr_lsb) == 0x18); |
| |
| static_assert(offsetof(siginfo_t, si_lower) == 0x20); |
| static_assert(offsetof(siginfo_t, si_upper) == 0x28); |
| |
| static_assert(offsetof(siginfo_t, si_pkey) == 0x20); |
| |
| static_assert(offsetof(siginfo_t, si_perf_data) == 0x18); |
| static_assert(offsetof(siginfo_t, si_perf_type) == 0x20); |
| static_assert(offsetof(siginfo_t, si_perf_flags) == 0x24); |
| |
| CHECK_SI_OFFSET(_sigpoll); |
| CHECK_SI_SIZE (_sigpoll, 4*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_band) == 0x10); |
| static_assert(offsetof(siginfo_t, si_fd) == 0x18); |
| |
| CHECK_SI_OFFSET(_sigsys); |
| CHECK_SI_SIZE (_sigsys, 4*sizeof(int)); |
| static_assert(offsetof(siginfo_t, si_call_addr) == 0x10); |
| static_assert(offsetof(siginfo_t, si_syscall) == 0x18); |
| static_assert(offsetof(siginfo_t, si_arch) == 0x1C); |
| |
| /* any new si_fields should be added here */ |