| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Xen time implementation. |
| * |
| * This is implemented in terms of a clocksource driver which uses |
| * the hypervisor clock as a nanosecond timebase, and a clockevent |
| * driver which uses the hypervisor's timer mechanism. |
| * |
| * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 |
| */ |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/gfp.h> |
| #include <linux/slab.h> |
| #include <linux/pvclock_gtod.h> |
| #include <linux/timekeeper_internal.h> |
| |
| #include <asm/pvclock.h> |
| #include <asm/xen/hypervisor.h> |
| #include <asm/xen/hypercall.h> |
| #include <asm/xen/cpuid.h> |
| |
| #include <xen/events.h> |
| #include <xen/features.h> |
| #include <xen/interface/xen.h> |
| #include <xen/interface/vcpu.h> |
| |
| #include "xen-ops.h" |
| |
| /* Minimum amount of time until next clock event fires */ |
| #define TIMER_SLOP 100000 |
| |
| static u64 xen_sched_clock_offset __read_mostly; |
| |
| /* Get the TSC speed from Xen */ |
| static unsigned long xen_tsc_khz(void) |
| { |
| struct pvclock_vcpu_time_info *info = |
| &HYPERVISOR_shared_info->vcpu_info[0].time; |
| |
| setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); |
| return pvclock_tsc_khz(info); |
| } |
| |
| static u64 xen_clocksource_read(void) |
| { |
| struct pvclock_vcpu_time_info *src; |
| u64 ret; |
| |
| preempt_disable_notrace(); |
| src = &__this_cpu_read(xen_vcpu)->time; |
| ret = pvclock_clocksource_read(src); |
| preempt_enable_notrace(); |
| return ret; |
| } |
| |
| static u64 xen_clocksource_get_cycles(struct clocksource *cs) |
| { |
| return xen_clocksource_read(); |
| } |
| |
| static noinstr u64 xen_sched_clock(void) |
| { |
| struct pvclock_vcpu_time_info *src; |
| u64 ret; |
| |
| src = &__this_cpu_read(xen_vcpu)->time; |
| ret = pvclock_clocksource_read_nowd(src); |
| ret -= xen_sched_clock_offset; |
| |
| return ret; |
| } |
| |
| static void xen_read_wallclock(struct timespec64 *ts) |
| { |
| struct shared_info *s = HYPERVISOR_shared_info; |
| struct pvclock_wall_clock *wall_clock = &(s->wc); |
| struct pvclock_vcpu_time_info *vcpu_time; |
| |
| vcpu_time = &get_cpu_var(xen_vcpu)->time; |
| pvclock_read_wallclock(wall_clock, vcpu_time, ts); |
| put_cpu_var(xen_vcpu); |
| } |
| |
| static void xen_get_wallclock(struct timespec64 *now) |
| { |
| xen_read_wallclock(now); |
| } |
| |
| static int xen_set_wallclock(const struct timespec64 *now) |
| { |
| return -ENODEV; |
| } |
| |
| static int xen_pvclock_gtod_notify(struct notifier_block *nb, |
| unsigned long was_set, void *priv) |
| { |
| /* Protected by the calling core code serialization */ |
| static struct timespec64 next_sync; |
| |
| struct xen_platform_op op; |
| struct timespec64 now; |
| struct timekeeper *tk = priv; |
| static bool settime64_supported = true; |
| int ret; |
| |
| now.tv_sec = tk->xtime_sec; |
| now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift); |
| |
| /* |
| * We only take the expensive HV call when the clock was set |
| * or when the 11 minutes RTC synchronization time elapsed. |
| */ |
| if (!was_set && timespec64_compare(&now, &next_sync) < 0) |
| return NOTIFY_OK; |
| |
| again: |
| if (settime64_supported) { |
| op.cmd = XENPF_settime64; |
| op.u.settime64.mbz = 0; |
| op.u.settime64.secs = now.tv_sec; |
| op.u.settime64.nsecs = now.tv_nsec; |
| op.u.settime64.system_time = xen_clocksource_read(); |
| } else { |
| op.cmd = XENPF_settime32; |
| op.u.settime32.secs = now.tv_sec; |
| op.u.settime32.nsecs = now.tv_nsec; |
| op.u.settime32.system_time = xen_clocksource_read(); |
| } |
| |
| ret = HYPERVISOR_platform_op(&op); |
| |
| if (ret == -ENOSYS && settime64_supported) { |
| settime64_supported = false; |
| goto again; |
| } |
| if (ret < 0) |
| return NOTIFY_BAD; |
| |
| /* |
| * Move the next drift compensation time 11 minutes |
| * ahead. That's emulating the sync_cmos_clock() update for |
| * the hardware RTC. |
| */ |
| next_sync = now; |
| next_sync.tv_sec += 11 * 60; |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block xen_pvclock_gtod_notifier = { |
| .notifier_call = xen_pvclock_gtod_notify, |
| }; |
| |
| static int xen_cs_enable(struct clocksource *cs) |
| { |
| vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK); |
| return 0; |
| } |
| |
| static struct clocksource xen_clocksource __read_mostly = { |
| .name = "xen", |
| .rating = 400, |
| .read = xen_clocksource_get_cycles, |
| .mask = CLOCKSOURCE_MASK(64), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| .enable = xen_cs_enable, |
| }; |
| |
| /* |
| Xen clockevent implementation |
| |
| Xen has two clockevent implementations: |
| |
| The old timer_op one works with all released versions of Xen prior |
| to version 3.0.4. This version of the hypervisor provides a |
| single-shot timer with nanosecond resolution. However, sharing the |
| same event channel is a 100Hz tick which is delivered while the |
| vcpu is running. We don't care about or use this tick, but it will |
| cause the core time code to think the timer fired too soon, and |
| will end up resetting it each time. It could be filtered, but |
| doing so has complications when the ktime clocksource is not yet |
| the xen clocksource (ie, at boot time). |
| |
| The new vcpu_op-based timer interface allows the tick timer period |
| to be changed or turned off. The tick timer is not useful as a |
| periodic timer because events are only delivered to running vcpus. |
| The one-shot timer can report when a timeout is in the past, so |
| set_next_event is capable of returning -ETIME when appropriate. |
| This interface is used when available. |
| */ |
| |
| |
| /* |
| Get a hypervisor absolute time. In theory we could maintain an |
| offset between the kernel's time and the hypervisor's time, and |
| apply that to a kernel's absolute timeout. Unfortunately the |
| hypervisor and kernel times can drift even if the kernel is using |
| the Xen clocksource, because ntp can warp the kernel's clocksource. |
| */ |
| static s64 get_abs_timeout(unsigned long delta) |
| { |
| return xen_clocksource_read() + delta; |
| } |
| |
| static int xen_timerop_shutdown(struct clock_event_device *evt) |
| { |
| /* cancel timeout */ |
| HYPERVISOR_set_timer_op(0); |
| |
| return 0; |
| } |
| |
| static int xen_timerop_set_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| WARN_ON(!clockevent_state_oneshot(evt)); |
| |
| if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0) |
| BUG(); |
| |
| /* We may have missed the deadline, but there's no real way of |
| knowing for sure. If the event was in the past, then we'll |
| get an immediate interrupt. */ |
| |
| return 0; |
| } |
| |
| static struct clock_event_device xen_timerop_clockevent __ro_after_init = { |
| .name = "xen", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| |
| .max_delta_ns = 0xffffffff, |
| .max_delta_ticks = 0xffffffff, |
| .min_delta_ns = TIMER_SLOP, |
| .min_delta_ticks = TIMER_SLOP, |
| |
| .mult = 1, |
| .shift = 0, |
| .rating = 500, |
| |
| .set_state_shutdown = xen_timerop_shutdown, |
| .set_next_event = xen_timerop_set_next_event, |
| }; |
| |
| static int xen_vcpuop_shutdown(struct clock_event_device *evt) |
| { |
| int cpu = smp_processor_id(); |
| |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, xen_vcpu_nr(cpu), |
| NULL) || |
| HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), |
| NULL)) |
| BUG(); |
| |
| return 0; |
| } |
| |
| static int xen_vcpuop_set_oneshot(struct clock_event_device *evt) |
| { |
| int cpu = smp_processor_id(); |
| |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), |
| NULL)) |
| BUG(); |
| |
| return 0; |
| } |
| |
| static int xen_vcpuop_set_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| int cpu = smp_processor_id(); |
| struct vcpu_set_singleshot_timer single; |
| int ret; |
| |
| WARN_ON(!clockevent_state_oneshot(evt)); |
| |
| single.timeout_abs_ns = get_abs_timeout(delta); |
| /* Get an event anyway, even if the timeout is already expired */ |
| single.flags = 0; |
| |
| ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, xen_vcpu_nr(cpu), |
| &single); |
| BUG_ON(ret != 0); |
| |
| return ret; |
| } |
| |
| static struct clock_event_device xen_vcpuop_clockevent __ro_after_init = { |
| .name = "xen", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| |
| .max_delta_ns = 0xffffffff, |
| .max_delta_ticks = 0xffffffff, |
| .min_delta_ns = TIMER_SLOP, |
| .min_delta_ticks = TIMER_SLOP, |
| |
| .mult = 1, |
| .shift = 0, |
| .rating = 500, |
| |
| .set_state_shutdown = xen_vcpuop_shutdown, |
| .set_state_oneshot = xen_vcpuop_set_oneshot, |
| .set_next_event = xen_vcpuop_set_next_event, |
| }; |
| |
| static const struct clock_event_device *xen_clockevent = |
| &xen_timerop_clockevent; |
| |
| struct xen_clock_event_device { |
| struct clock_event_device evt; |
| char name[16]; |
| }; |
| static DEFINE_PER_CPU(struct xen_clock_event_device, xen_clock_events) = { .evt.irq = -1 }; |
| |
| static irqreturn_t xen_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = this_cpu_ptr(&xen_clock_events.evt); |
| irqreturn_t ret; |
| |
| ret = IRQ_NONE; |
| if (evt->event_handler) { |
| evt->event_handler(evt); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| void xen_teardown_timer(int cpu) |
| { |
| struct clock_event_device *evt; |
| evt = &per_cpu(xen_clock_events, cpu).evt; |
| |
| if (evt->irq >= 0) { |
| unbind_from_irqhandler(evt->irq, NULL); |
| evt->irq = -1; |
| } |
| } |
| |
| void xen_setup_timer(int cpu) |
| { |
| struct xen_clock_event_device *xevt = &per_cpu(xen_clock_events, cpu); |
| struct clock_event_device *evt = &xevt->evt; |
| int irq; |
| |
| WARN(evt->irq >= 0, "IRQ%d for CPU%d is already allocated\n", evt->irq, cpu); |
| if (evt->irq >= 0) |
| xen_teardown_timer(cpu); |
| |
| printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu); |
| |
| snprintf(xevt->name, sizeof(xevt->name), "timer%d", cpu); |
| |
| irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt, |
| IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER| |
| IRQF_FORCE_RESUME|IRQF_EARLY_RESUME, |
| xevt->name, NULL); |
| (void)xen_set_irq_priority(irq, XEN_IRQ_PRIORITY_MAX); |
| |
| memcpy(evt, xen_clockevent, sizeof(*evt)); |
| |
| evt->cpumask = cpumask_of(cpu); |
| evt->irq = irq; |
| } |
| |
| |
| void xen_setup_cpu_clockevents(void) |
| { |
| clockevents_register_device(this_cpu_ptr(&xen_clock_events.evt)); |
| } |
| |
| void xen_timer_resume(void) |
| { |
| int cpu; |
| |
| if (xen_clockevent != &xen_vcpuop_clockevent) |
| return; |
| |
| for_each_online_cpu(cpu) { |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, |
| xen_vcpu_nr(cpu), NULL)) |
| BUG(); |
| } |
| } |
| |
| static struct pvclock_vsyscall_time_info *xen_clock __read_mostly; |
| static u64 xen_clock_value_saved; |
| |
| void xen_save_time_memory_area(void) |
| { |
| struct vcpu_register_time_memory_area t; |
| int ret; |
| |
| xen_clock_value_saved = xen_clocksource_read() - xen_sched_clock_offset; |
| |
| if (!xen_clock) |
| return; |
| |
| t.addr.v = NULL; |
| |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); |
| if (ret != 0) |
| pr_notice("Cannot save secondary vcpu_time_info (err %d)", |
| ret); |
| else |
| clear_page(xen_clock); |
| } |
| |
| void xen_restore_time_memory_area(void) |
| { |
| struct vcpu_register_time_memory_area t; |
| int ret; |
| |
| if (!xen_clock) |
| goto out; |
| |
| t.addr.v = &xen_clock->pvti; |
| |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); |
| |
| /* |
| * We don't disable VDSO_CLOCKMODE_PVCLOCK entirely if it fails to |
| * register the secondary time info with Xen or if we migrated to a |
| * host without the necessary flags. On both of these cases what |
| * happens is either process seeing a zeroed out pvti or seeing no |
| * PVCLOCK_TSC_STABLE_BIT bit set. Userspace checks the latter and |
| * if 0, it discards the data in pvti and fallbacks to a system |
| * call for a reliable timestamp. |
| */ |
| if (ret != 0) |
| pr_notice("Cannot restore secondary vcpu_time_info (err %d)", |
| ret); |
| |
| out: |
| /* Need pvclock_resume() before using xen_clocksource_read(). */ |
| pvclock_resume(); |
| xen_sched_clock_offset = xen_clocksource_read() - xen_clock_value_saved; |
| } |
| |
| static void xen_setup_vsyscall_time_info(void) |
| { |
| struct vcpu_register_time_memory_area t; |
| struct pvclock_vsyscall_time_info *ti; |
| int ret; |
| |
| ti = (struct pvclock_vsyscall_time_info *)get_zeroed_page(GFP_KERNEL); |
| if (!ti) |
| return; |
| |
| t.addr.v = &ti->pvti; |
| |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); |
| if (ret) { |
| pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (err %d)\n", ret); |
| free_page((unsigned long)ti); |
| return; |
| } |
| |
| /* |
| * If primary time info had this bit set, secondary should too since |
| * it's the same data on both just different memory regions. But we |
| * still check it in case hypervisor is buggy. |
| */ |
| if (!(ti->pvti.flags & PVCLOCK_TSC_STABLE_BIT)) { |
| t.addr.v = NULL; |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, |
| 0, &t); |
| if (!ret) |
| free_page((unsigned long)ti); |
| |
| pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (tsc unstable)\n"); |
| return; |
| } |
| |
| xen_clock = ti; |
| pvclock_set_pvti_cpu0_va(xen_clock); |
| |
| xen_clocksource.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK; |
| } |
| |
| /* |
| * Check if it is possible to safely use the tsc as a clocksource. This is |
| * only true if the hypervisor notifies the guest that its tsc is invariant, |
| * the tsc is stable, and the tsc instruction will never be emulated. |
| */ |
| static int __init xen_tsc_safe_clocksource(void) |
| { |
| u32 eax, ebx, ecx, edx; |
| |
| if (!(boot_cpu_has(X86_FEATURE_CONSTANT_TSC))) |
| return 0; |
| |
| if (!(boot_cpu_has(X86_FEATURE_NONSTOP_TSC))) |
| return 0; |
| |
| if (check_tsc_unstable()) |
| return 0; |
| |
| /* Leaf 4, sub-leaf 0 (0x40000x03) */ |
| cpuid_count(xen_cpuid_base() + 3, 0, &eax, &ebx, &ecx, &edx); |
| |
| return ebx == XEN_CPUID_TSC_MODE_NEVER_EMULATE; |
| } |
| |
| static void __init xen_time_init(void) |
| { |
| struct pvclock_vcpu_time_info *pvti; |
| int cpu = smp_processor_id(); |
| struct timespec64 tp; |
| |
| /* |
| * As Dom0 is never moved, no penalty on using TSC there. |
| * |
| * If it is possible for the guest to determine that the tsc is a safe |
| * clocksource, then set xen_clocksource rating below that of the tsc |
| * so that the system prefers tsc instead. |
| */ |
| if (xen_initial_domain()) |
| xen_clocksource.rating = 275; |
| else if (xen_tsc_safe_clocksource()) |
| xen_clocksource.rating = 299; |
| |
| clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC); |
| |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), |
| NULL) == 0) { |
| /* Successfully turned off 100Hz tick, so we have the |
| vcpuop-based timer interface */ |
| printk(KERN_DEBUG "Xen: using vcpuop timer interface\n"); |
| xen_clockevent = &xen_vcpuop_clockevent; |
| } |
| |
| /* Set initial system time with full resolution */ |
| xen_read_wallclock(&tp); |
| do_settimeofday64(&tp); |
| |
| setup_force_cpu_cap(X86_FEATURE_TSC); |
| |
| /* |
| * We check ahead on the primary time info if this |
| * bit is supported hence speeding up Xen clocksource. |
| */ |
| pvti = &__this_cpu_read(xen_vcpu)->time; |
| if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) { |
| pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); |
| xen_setup_vsyscall_time_info(); |
| } |
| |
| xen_setup_runstate_info(cpu); |
| xen_setup_timer(cpu); |
| xen_setup_cpu_clockevents(); |
| |
| xen_time_setup_guest(); |
| |
| if (xen_initial_domain()) |
| pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier); |
| } |
| |
| static void __init xen_init_time_common(void) |
| { |
| xen_sched_clock_offset = xen_clocksource_read(); |
| static_call_update(pv_steal_clock, xen_steal_clock); |
| paravirt_set_sched_clock(xen_sched_clock); |
| |
| x86_platform.calibrate_tsc = xen_tsc_khz; |
| x86_platform.get_wallclock = xen_get_wallclock; |
| } |
| |
| void __init xen_init_time_ops(void) |
| { |
| xen_init_time_common(); |
| |
| x86_init.timers.timer_init = xen_time_init; |
| x86_init.timers.setup_percpu_clockev = x86_init_noop; |
| x86_cpuinit.setup_percpu_clockev = x86_init_noop; |
| |
| /* Dom0 uses the native method to set the hardware RTC. */ |
| if (!xen_initial_domain()) |
| x86_platform.set_wallclock = xen_set_wallclock; |
| } |
| |
| #ifdef CONFIG_XEN_PVHVM |
| static void xen_hvm_setup_cpu_clockevents(void) |
| { |
| int cpu = smp_processor_id(); |
| xen_setup_runstate_info(cpu); |
| /* |
| * xen_setup_timer(cpu) - snprintf is bad in atomic context. Hence |
| * doing it xen_hvm_cpu_notify (which gets called by smp_init during |
| * early bootup and also during CPU hotplug events). |
| */ |
| xen_setup_cpu_clockevents(); |
| } |
| |
| void __init xen_hvm_init_time_ops(void) |
| { |
| static bool hvm_time_initialized; |
| |
| if (hvm_time_initialized) |
| return; |
| |
| /* |
| * vector callback is needed otherwise we cannot receive interrupts |
| * on cpu > 0 and at this point we don't know how many cpus are |
| * available. |
| */ |
| if (!xen_have_vector_callback) |
| return; |
| |
| if (!xen_feature(XENFEAT_hvm_safe_pvclock)) { |
| pr_info_once("Xen doesn't support pvclock on HVM, disable pv timer"); |
| return; |
| } |
| |
| /* |
| * Only MAX_VIRT_CPUS 'vcpu_info' are embedded inside 'shared_info'. |
| * The __this_cpu_read(xen_vcpu) is still NULL when Xen HVM guest |
| * boots on vcpu >= MAX_VIRT_CPUS (e.g., kexec), To access |
| * __this_cpu_read(xen_vcpu) via xen_clocksource_read() will panic. |
| * |
| * The xen_hvm_init_time_ops() should be called again later after |
| * __this_cpu_read(xen_vcpu) is available. |
| */ |
| if (!__this_cpu_read(xen_vcpu)) { |
| pr_info("Delay xen_init_time_common() as kernel is running on vcpu=%d\n", |
| xen_vcpu_nr(0)); |
| return; |
| } |
| |
| xen_init_time_common(); |
| |
| x86_init.timers.setup_percpu_clockev = xen_time_init; |
| x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents; |
| |
| x86_platform.set_wallclock = xen_set_wallclock; |
| |
| hvm_time_initialized = true; |
| } |
| #endif |
| |
| /* Kernel parameter to specify Xen timer slop */ |
| static int __init parse_xen_timer_slop(char *ptr) |
| { |
| unsigned long slop = memparse(ptr, NULL); |
| |
| xen_timerop_clockevent.min_delta_ns = slop; |
| xen_timerop_clockevent.min_delta_ticks = slop; |
| xen_vcpuop_clockevent.min_delta_ns = slop; |
| xen_vcpuop_clockevent.min_delta_ticks = slop; |
| |
| return 0; |
| } |
| early_param("xen_timer_slop", parse_xen_timer_slop); |