| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/arch/arm/kernel/module.c | |
| * | |
| * Copyright (C) 2002 Russell King. | |
| * Modified for nommu by Hyok S. Choi | |
| * | |
| * Module allocation method suggested by Andi Kleen. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleloader.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/elf.h> | |
| #include <linux/fs.h> | |
| #include <linux/string.h> | |
| #include <asm/sections.h> | |
| #include <asm/smp_plat.h> | |
| #include <asm/unwind.h> | |
| #include <asm/opcodes.h> | |
| bool module_init_section(const char *name) | |
| { | |
| return strstarts(name, ".init") || | |
| strstarts(name, ".ARM.extab.init") || | |
| strstarts(name, ".ARM.exidx.init"); | |
| } | |
| bool module_exit_section(const char *name) | |
| { | |
| return strstarts(name, ".exit") || | |
| strstarts(name, ".ARM.extab.exit") || | |
| strstarts(name, ".ARM.exidx.exit"); | |
| } | |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS | |
| /* | |
| * This implements the partitioning algorithm for group relocations as | |
| * documented in the ARM AArch32 ELF psABI (IHI 0044). | |
| * | |
| * A single PC-relative symbol reference is divided in up to 3 add or subtract | |
| * operations, where the final one could be incorporated into a load/store | |
| * instruction with immediate offset. E.g., | |
| * | |
| * ADD Rd, PC, #... or ADD Rd, PC, #... | |
| * ADD Rd, Rd, #... ADD Rd, Rd, #... | |
| * LDR Rd, [Rd, #...] ADD Rd, Rd, #... | |
| * | |
| * The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is | |
| * of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of | |
| * -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for | |
| * any in-kernel symbol reference (unless module PLTs are being used). | |
| * | |
| * The main advantage of this approach over the typical pattern using a literal | |
| * load is that literal loads may miss in the D-cache, and generally lead to | |
| * lower cache efficiency for variables that are referenced often from many | |
| * different places in the code. | |
| */ | |
| static u32 get_group_rem(u32 group, u32 *offset) | |
| { | |
| u32 val = *offset; | |
| u32 shift; | |
| do { | |
| shift = val ? (31 - __fls(val)) & ~1 : 32; | |
| *offset = val; | |
| if (!val) | |
| break; | |
| val &= 0xffffff >> shift; | |
| } while (group--); | |
| return shift; | |
| } | |
| #endif | |
| int | |
| apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, | |
| unsigned int relindex, struct module *module) | |
| { | |
| Elf32_Shdr *symsec = sechdrs + symindex; | |
| Elf32_Shdr *relsec = sechdrs + relindex; | |
| Elf32_Shdr *dstsec = sechdrs + relsec->sh_info; | |
| Elf32_Rel *rel = (void *)relsec->sh_addr; | |
| unsigned int i; | |
| for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) { | |
| unsigned long loc; | |
| Elf32_Sym *sym; | |
| const char *symname; | |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS | |
| u32 shift, group = 1; | |
| #endif | |
| s32 offset; | |
| u32 tmp; | |
| #ifdef CONFIG_THUMB2_KERNEL | |
| u32 upper, lower, sign, j1, j2; | |
| #endif | |
| offset = ELF32_R_SYM(rel->r_info); | |
| if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) { | |
| pr_err("%s: section %u reloc %u: bad relocation sym offset\n", | |
| module->name, relindex, i); | |
| return -ENOEXEC; | |
| } | |
| sym = ((Elf32_Sym *)symsec->sh_addr) + offset; | |
| symname = strtab + sym->st_name; | |
| if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) { | |
| pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n", | |
| module->name, relindex, i, symname, | |
| rel->r_offset, dstsec->sh_size); | |
| return -ENOEXEC; | |
| } | |
| loc = dstsec->sh_addr + rel->r_offset; | |
| switch (ELF32_R_TYPE(rel->r_info)) { | |
| case R_ARM_NONE: | |
| /* ignore */ | |
| break; | |
| case R_ARM_ABS32: | |
| case R_ARM_TARGET1: | |
| *(u32 *)loc += sym->st_value; | |
| break; | |
| case R_ARM_PC24: | |
| case R_ARM_CALL: | |
| case R_ARM_JUMP24: | |
| if (sym->st_value & 3) { | |
| pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n", | |
| module->name, relindex, i, symname); | |
| return -ENOEXEC; | |
| } | |
| offset = __mem_to_opcode_arm(*(u32 *)loc); | |
| offset = (offset & 0x00ffffff) << 2; | |
| offset = sign_extend32(offset, 25); | |
| offset += sym->st_value - loc; | |
| /* | |
| * Route through a PLT entry if 'offset' exceeds the | |
| * supported range. Note that 'offset + loc + 8' | |
| * contains the absolute jump target, i.e., | |
| * @sym + addend, corrected for the +8 PC bias. | |
| */ | |
| if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && | |
| (offset <= (s32)0xfe000000 || | |
| offset >= (s32)0x02000000)) | |
| offset = get_module_plt(module, loc, | |
| offset + loc + 8) | |
| - loc - 8; | |
| if (offset <= (s32)0xfe000000 || | |
| offset >= (s32)0x02000000) { | |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", | |
| module->name, relindex, i, symname, | |
| ELF32_R_TYPE(rel->r_info), loc, | |
| sym->st_value); | |
| return -ENOEXEC; | |
| } | |
| offset >>= 2; | |
| offset &= 0x00ffffff; | |
| *(u32 *)loc &= __opcode_to_mem_arm(0xff000000); | |
| *(u32 *)loc |= __opcode_to_mem_arm(offset); | |
| break; | |
| case R_ARM_V4BX: | |
| /* Preserve Rm and the condition code. Alter | |
| * other bits to re-code instruction as | |
| * MOV PC,Rm. | |
| */ | |
| *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f); | |
| *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000); | |
| break; | |
| case R_ARM_PREL31: | |
| offset = (*(s32 *)loc << 1) >> 1; /* sign extend */ | |
| offset += sym->st_value - loc; | |
| if (offset >= 0x40000000 || offset < -0x40000000) { | |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", | |
| module->name, relindex, i, symname, | |
| ELF32_R_TYPE(rel->r_info), loc, | |
| sym->st_value); | |
| return -ENOEXEC; | |
| } | |
| *(u32 *)loc &= 0x80000000; | |
| *(u32 *)loc |= offset & 0x7fffffff; | |
| break; | |
| case R_ARM_REL32: | |
| *(u32 *)loc += sym->st_value - loc; | |
| break; | |
| case R_ARM_MOVW_ABS_NC: | |
| case R_ARM_MOVT_ABS: | |
| case R_ARM_MOVW_PREL_NC: | |
| case R_ARM_MOVT_PREL: | |
| offset = tmp = __mem_to_opcode_arm(*(u32 *)loc); | |
| offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); | |
| offset = sign_extend32(offset, 15); | |
| offset += sym->st_value; | |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL || | |
| ELF32_R_TYPE(rel->r_info) == R_ARM_MOVW_PREL_NC) | |
| offset -= loc; | |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS || | |
| ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL) | |
| offset >>= 16; | |
| tmp &= 0xfff0f000; | |
| tmp |= ((offset & 0xf000) << 4) | | |
| (offset & 0x0fff); | |
| *(u32 *)loc = __opcode_to_mem_arm(tmp); | |
| break; | |
| #ifdef CONFIG_ARM_HAS_GROUP_RELOCS | |
| case R_ARM_ALU_PC_G0_NC: | |
| group = 0; | |
| fallthrough; | |
| case R_ARM_ALU_PC_G1_NC: | |
| tmp = __mem_to_opcode_arm(*(u32 *)loc); | |
| offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7); | |
| if (tmp & BIT(22)) | |
| offset = -offset; | |
| offset += sym->st_value - loc; | |
| if (offset < 0) { | |
| offset = -offset; | |
| tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode | |
| } else { | |
| tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode | |
| } | |
| shift = get_group_rem(group, &offset); | |
| if (shift < 24) { | |
| offset >>= 24 - shift; | |
| offset |= (shift + 8) << 7; | |
| } | |
| *(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset); | |
| break; | |
| case R_ARM_LDR_PC_G2: | |
| tmp = __mem_to_opcode_arm(*(u32 *)loc); | |
| offset = tmp & 0xfff; | |
| if (~tmp & BIT(23)) // U bit cleared? | |
| offset = -offset; | |
| offset += sym->st_value - loc; | |
| if (offset < 0) { | |
| offset = -offset; | |
| tmp &= ~BIT(23); // clear U bit | |
| } else { | |
| tmp |= BIT(23); // set U bit | |
| } | |
| get_group_rem(2, &offset); | |
| if (offset > 0xfff) { | |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", | |
| module->name, relindex, i, symname, | |
| ELF32_R_TYPE(rel->r_info), loc, | |
| sym->st_value); | |
| return -ENOEXEC; | |
| } | |
| *(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset); | |
| break; | |
| #endif | |
| #ifdef CONFIG_THUMB2_KERNEL | |
| case R_ARM_THM_CALL: | |
| case R_ARM_THM_JUMP24: | |
| /* | |
| * For function symbols, only Thumb addresses are | |
| * allowed (no interworking). | |
| * | |
| * For non-function symbols, the destination | |
| * has no specific ARM/Thumb disposition, so | |
| * the branch is resolved under the assumption | |
| * that interworking is not required. | |
| */ | |
| if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && | |
| !(sym->st_value & 1)) { | |
| pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n", | |
| module->name, relindex, i, symname); | |
| return -ENOEXEC; | |
| } | |
| upper = __mem_to_opcode_thumb16(*(u16 *)loc); | |
| lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); | |
| /* | |
| * 25 bit signed address range (Thumb-2 BL and B.W | |
| * instructions): | |
| * S:I1:I2:imm10:imm11:0 | |
| * where: | |
| * S = upper[10] = offset[24] | |
| * I1 = ~(J1 ^ S) = offset[23] | |
| * I2 = ~(J2 ^ S) = offset[22] | |
| * imm10 = upper[9:0] = offset[21:12] | |
| * imm11 = lower[10:0] = offset[11:1] | |
| * J1 = lower[13] | |
| * J2 = lower[11] | |
| */ | |
| sign = (upper >> 10) & 1; | |
| j1 = (lower >> 13) & 1; | |
| j2 = (lower >> 11) & 1; | |
| offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) | | |
| ((~(j2 ^ sign) & 1) << 22) | | |
| ((upper & 0x03ff) << 12) | | |
| ((lower & 0x07ff) << 1); | |
| offset = sign_extend32(offset, 24); | |
| offset += sym->st_value - loc; | |
| /* | |
| * Route through a PLT entry if 'offset' exceeds the | |
| * supported range. | |
| */ | |
| if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && | |
| (offset <= (s32)0xff000000 || | |
| offset >= (s32)0x01000000)) | |
| offset = get_module_plt(module, loc, | |
| offset + loc + 4) | |
| - loc - 4; | |
| if (offset <= (s32)0xff000000 || | |
| offset >= (s32)0x01000000) { | |
| pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", | |
| module->name, relindex, i, symname, | |
| ELF32_R_TYPE(rel->r_info), loc, | |
| sym->st_value); | |
| return -ENOEXEC; | |
| } | |
| sign = (offset >> 24) & 1; | |
| j1 = sign ^ (~(offset >> 23) & 1); | |
| j2 = sign ^ (~(offset >> 22) & 1); | |
| upper = (u16)((upper & 0xf800) | (sign << 10) | | |
| ((offset >> 12) & 0x03ff)); | |
| lower = (u16)((lower & 0xd000) | | |
| (j1 << 13) | (j2 << 11) | | |
| ((offset >> 1) & 0x07ff)); | |
| *(u16 *)loc = __opcode_to_mem_thumb16(upper); | |
| *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); | |
| break; | |
| case R_ARM_THM_MOVW_ABS_NC: | |
| case R_ARM_THM_MOVT_ABS: | |
| case R_ARM_THM_MOVW_PREL_NC: | |
| case R_ARM_THM_MOVT_PREL: | |
| upper = __mem_to_opcode_thumb16(*(u16 *)loc); | |
| lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); | |
| /* | |
| * MOVT/MOVW instructions encoding in Thumb-2: | |
| * | |
| * i = upper[10] | |
| * imm4 = upper[3:0] | |
| * imm3 = lower[14:12] | |
| * imm8 = lower[7:0] | |
| * | |
| * imm16 = imm4:i:imm3:imm8 | |
| */ | |
| offset = ((upper & 0x000f) << 12) | | |
| ((upper & 0x0400) << 1) | | |
| ((lower & 0x7000) >> 4) | (lower & 0x00ff); | |
| offset = sign_extend32(offset, 15); | |
| offset += sym->st_value; | |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL || | |
| ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVW_PREL_NC) | |
| offset -= loc; | |
| if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS || | |
| ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL) | |
| offset >>= 16; | |
| upper = (u16)((upper & 0xfbf0) | | |
| ((offset & 0xf000) >> 12) | | |
| ((offset & 0x0800) >> 1)); | |
| lower = (u16)((lower & 0x8f00) | | |
| ((offset & 0x0700) << 4) | | |
| (offset & 0x00ff)); | |
| *(u16 *)loc = __opcode_to_mem_thumb16(upper); | |
| *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); | |
| break; | |
| #endif | |
| default: | |
| pr_err("%s: unknown relocation: %u\n", | |
| module->name, ELF32_R_TYPE(rel->r_info)); | |
| return -ENOEXEC; | |
| } | |
| } | |
| return 0; | |
| } | |
| static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, | |
| const Elf_Shdr *sechdrs, const char *name) | |
| { | |
| const Elf_Shdr *s, *se; | |
| const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; | |
| for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) | |
| if (strcmp(name, secstrs + s->sh_name) == 0) | |
| return s; | |
| return NULL; | |
| } | |
| extern void fixup_pv_table(const void *, unsigned long); | |
| extern void fixup_smp(const void *, unsigned long); | |
| int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, | |
| struct module *mod) | |
| { | |
| const Elf_Shdr *s = NULL; | |
| #ifdef CONFIG_ARM_UNWIND | |
| const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; | |
| const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; | |
| struct list_head *unwind_list = &mod->arch.unwind_list; | |
| INIT_LIST_HEAD(unwind_list); | |
| mod->arch.init_table = NULL; | |
| for (s = sechdrs; s < sechdrs_end; s++) { | |
| const char *secname = secstrs + s->sh_name; | |
| const char *txtname; | |
| const Elf_Shdr *txt_sec; | |
| if (!(s->sh_flags & SHF_ALLOC) || | |
| s->sh_type != ELF_SECTION_UNWIND) | |
| continue; | |
| if (!strcmp(".ARM.exidx", secname)) | |
| txtname = ".text"; | |
| else | |
| txtname = secname + strlen(".ARM.exidx"); | |
| txt_sec = find_mod_section(hdr, sechdrs, txtname); | |
| if (txt_sec) { | |
| struct unwind_table *table = | |
| unwind_table_add(s->sh_addr, | |
| s->sh_size, | |
| txt_sec->sh_addr, | |
| txt_sec->sh_size); | |
| list_add(&table->mod_list, unwind_list); | |
| /* save init table for module_arch_freeing_init */ | |
| if (strcmp(".ARM.exidx.init.text", secname) == 0) | |
| mod->arch.init_table = table; | |
| } | |
| } | |
| #endif | |
| #ifdef CONFIG_ARM_PATCH_PHYS_VIRT | |
| s = find_mod_section(hdr, sechdrs, ".pv_table"); | |
| if (s) | |
| fixup_pv_table((void *)s->sh_addr, s->sh_size); | |
| #endif | |
| s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); | |
| if (s && !is_smp()) | |
| #ifdef CONFIG_SMP_ON_UP | |
| fixup_smp((void *)s->sh_addr, s->sh_size); | |
| #else | |
| return -EINVAL; | |
| #endif | |
| return 0; | |
| } | |
| void | |
| module_arch_cleanup(struct module *mod) | |
| { | |
| #ifdef CONFIG_ARM_UNWIND | |
| struct unwind_table *tmp; | |
| struct unwind_table *n; | |
| list_for_each_entry_safe(tmp, n, | |
| &mod->arch.unwind_list, mod_list) { | |
| list_del(&tmp->mod_list); | |
| unwind_table_del(tmp); | |
| } | |
| mod->arch.init_table = NULL; | |
| #endif | |
| } | |
| void module_arch_freeing_init(struct module *mod) | |
| { | |
| #ifdef CONFIG_ARM_UNWIND | |
| struct unwind_table *init = mod->arch.init_table; | |
| if (init) { | |
| mod->arch.init_table = NULL; | |
| list_del(&init->mod_list); | |
| unwind_table_del(init); | |
| } | |
| #endif | |
| } |