| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * BYD TouchPad PS/2 mouse driver | |
| * | |
| * Copyright (C) 2015 Chris Diamand <chris@diamand.org> | |
| * Copyright (C) 2015 Richard Pospesel | |
| * Copyright (C) 2015 Tai Chi Minh Ralph Eastwood | |
| * Copyright (C) 2015 Martin Wimpress | |
| * Copyright (C) 2015 Jay Kuri | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/input.h> | |
| #include <linux/libps2.h> | |
| #include <linux/serio.h> | |
| #include <linux/slab.h> | |
| #include "psmouse.h" | |
| #include "byd.h" | |
| /* PS2 Bits */ | |
| #define PS2_Y_OVERFLOW BIT_MASK(7) | |
| #define PS2_X_OVERFLOW BIT_MASK(6) | |
| #define PS2_Y_SIGN BIT_MASK(5) | |
| #define PS2_X_SIGN BIT_MASK(4) | |
| #define PS2_ALWAYS_1 BIT_MASK(3) | |
| #define PS2_MIDDLE BIT_MASK(2) | |
| #define PS2_RIGHT BIT_MASK(1) | |
| #define PS2_LEFT BIT_MASK(0) | |
| /* | |
| * BYD pad constants | |
| */ | |
| /* | |
| * True device resolution is unknown, however experiments show the | |
| * resolution is about 111 units/mm. | |
| * Absolute coordinate packets are in the range 0-255 for both X and Y | |
| * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in | |
| * the right ballpark given the touchpad's physical dimensions and estimate | |
| * resolution per spec sheet, device active area dimensions are | |
| * 101.6 x 60.1 mm. | |
| */ | |
| #define BYD_PAD_WIDTH 11264 | |
| #define BYD_PAD_HEIGHT 6656 | |
| #define BYD_PAD_RESOLUTION 111 | |
| /* | |
| * Given the above dimensions, relative packets velocity is in multiples of | |
| * 1 unit / 11 milliseconds. We use this dt to estimate distance traveled | |
| */ | |
| #define BYD_DT 11 | |
| /* Time in jiffies used to timeout various touch events (64 ms) */ | |
| #define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64) | |
| /* BYD commands reverse engineered from windows driver */ | |
| /* | |
| * Swipe gesture from off-pad to on-pad | |
| * 0 : disable | |
| * 1 : enable | |
| */ | |
| #define BYD_CMD_SET_OFFSCREEN_SWIPE 0x10cc | |
| /* | |
| * Tap and drag delay time | |
| * 0 : disable | |
| * 1 - 8 : least to most delay | |
| */ | |
| #define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0x10cf | |
| /* | |
| * Physical buttons function mapping | |
| * 0 : enable | |
| * 4 : normal | |
| * 5 : left button custom command | |
| * 6 : right button custom command | |
| * 8 : disable | |
| */ | |
| #define BYD_CMD_SET_PHYSICAL_BUTTONS 0x10d0 | |
| /* | |
| * Absolute mode (1 byte X/Y resolution) | |
| * 0 : disable | |
| * 2 : enable | |
| */ | |
| #define BYD_CMD_SET_ABSOLUTE_MODE 0x10d1 | |
| /* | |
| * Two finger scrolling | |
| * 1 : vertical | |
| * 2 : horizontal | |
| * 3 : vertical + horizontal | |
| * 4 : disable | |
| */ | |
| #define BYD_CMD_SET_TWO_FINGER_SCROLL 0x10d2 | |
| /* | |
| * Handedness | |
| * 1 : right handed | |
| * 2 : left handed | |
| */ | |
| #define BYD_CMD_SET_HANDEDNESS 0x10d3 | |
| /* | |
| * Tap to click | |
| * 1 : enable | |
| * 2 : disable | |
| */ | |
| #define BYD_CMD_SET_TAP 0x10d4 | |
| /* | |
| * Tap and drag | |
| * 1 : tap and hold to drag | |
| * 2 : tap and hold to drag + lock | |
| * 3 : disable | |
| */ | |
| #define BYD_CMD_SET_TAP_DRAG 0x10d5 | |
| /* | |
| * Touch sensitivity | |
| * 1 - 7 : least to most sensitive | |
| */ | |
| #define BYD_CMD_SET_TOUCH_SENSITIVITY 0x10d6 | |
| /* | |
| * One finger scrolling | |
| * 1 : vertical | |
| * 2 : horizontal | |
| * 3 : vertical + horizontal | |
| * 4 : disable | |
| */ | |
| #define BYD_CMD_SET_ONE_FINGER_SCROLL 0x10d7 | |
| /* | |
| * One finger scrolling function | |
| * 1 : free scrolling | |
| * 2 : edge motion | |
| * 3 : free scrolling + edge motion | |
| * 4 : disable | |
| */ | |
| #define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0x10d8 | |
| /* | |
| * Sliding speed | |
| * 1 - 5 : slowest to fastest | |
| */ | |
| #define BYD_CMD_SET_SLIDING_SPEED 0x10da | |
| /* | |
| * Edge motion | |
| * 1 : disable | |
| * 2 : enable when dragging | |
| * 3 : enable when dragging and pointing | |
| */ | |
| #define BYD_CMD_SET_EDGE_MOTION 0x10db | |
| /* | |
| * Left edge region size | |
| * 0 - 7 : smallest to largest width | |
| */ | |
| #define BYD_CMD_SET_LEFT_EDGE_REGION 0x10dc | |
| /* | |
| * Top edge region size | |
| * 0 - 9 : smallest to largest height | |
| */ | |
| #define BYD_CMD_SET_TOP_EDGE_REGION 0x10dd | |
| /* | |
| * Disregard palm press as clicks | |
| * 1 - 6 : smallest to largest | |
| */ | |
| #define BYD_CMD_SET_PALM_CHECK 0x10de | |
| /* | |
| * Right edge region size | |
| * 0 - 7 : smallest to largest width | |
| */ | |
| #define BYD_CMD_SET_RIGHT_EDGE_REGION 0x10df | |
| /* | |
| * Bottom edge region size | |
| * 0 - 9 : smallest to largest height | |
| */ | |
| #define BYD_CMD_SET_BOTTOM_EDGE_REGION 0x10e1 | |
| /* | |
| * Multitouch gestures | |
| * 1 : enable | |
| * 2 : disable | |
| */ | |
| #define BYD_CMD_SET_MULTITOUCH 0x10e3 | |
| /* | |
| * Edge motion speed | |
| * 0 : control with finger pressure | |
| * 1 - 9 : slowest to fastest | |
| */ | |
| #define BYD_CMD_SET_EDGE_MOTION_SPEED 0x10e4 | |
| /* | |
| * Two finger scolling function | |
| * 0 : free scrolling | |
| * 1 : free scrolling (with momentum) | |
| * 2 : edge motion | |
| * 3 : free scrolling (with momentum) + edge motion | |
| * 4 : disable | |
| */ | |
| #define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0x10e5 | |
| /* | |
| * The touchpad generates a mixture of absolute and relative packets, indicated | |
| * by the last byte of each packet being set to one of the following: | |
| */ | |
| #define BYD_PACKET_ABSOLUTE 0xf8 | |
| #define BYD_PACKET_RELATIVE 0x00 | |
| /* Multitouch gesture packets */ | |
| #define BYD_PACKET_PINCH_IN 0xd8 | |
| #define BYD_PACKET_PINCH_OUT 0x28 | |
| #define BYD_PACKET_ROTATE_CLOCKWISE 0x29 | |
| #define BYD_PACKET_ROTATE_ANTICLOCKWISE 0xd7 | |
| #define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0x2a | |
| #define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0x2b | |
| #define BYD_PACKET_TWO_FINGER_SCROLL_UP 0xd5 | |
| #define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0xd6 | |
| #define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0x2c | |
| #define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0x2d | |
| #define BYD_PACKET_THREE_FINGER_SWIPE_UP 0xd3 | |
| #define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0xd4 | |
| #define BYD_PACKET_FOUR_FINGER_DOWN 0x33 | |
| #define BYD_PACKET_FOUR_FINGER_UP 0xcd | |
| #define BYD_PACKET_REGION_SCROLL_RIGHT 0x35 | |
| #define BYD_PACKET_REGION_SCROLL_DOWN 0x36 | |
| #define BYD_PACKET_REGION_SCROLL_UP 0xca | |
| #define BYD_PACKET_REGION_SCROLL_LEFT 0xcb | |
| #define BYD_PACKET_RIGHT_CORNER_CLICK 0xd2 | |
| #define BYD_PACKET_LEFT_CORNER_CLICK 0x2e | |
| #define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0x2f | |
| #define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0x37 | |
| #define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0x30 | |
| #define BYD_PACKET_ONTO_PAD_SWIPE_UP 0xd0 | |
| #define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0xc9 | |
| struct byd_data { | |
| struct timer_list timer; | |
| struct psmouse *psmouse; | |
| s32 abs_x; | |
| s32 abs_y; | |
| typeof(jiffies) last_touch_time; | |
| bool btn_left; | |
| bool btn_right; | |
| bool touch; | |
| }; | |
| static void byd_report_input(struct psmouse *psmouse) | |
| { | |
| struct byd_data *priv = psmouse->private; | |
| struct input_dev *dev = psmouse->dev; | |
| input_report_key(dev, BTN_TOUCH, priv->touch); | |
| input_report_key(dev, BTN_TOOL_FINGER, priv->touch); | |
| input_report_abs(dev, ABS_X, priv->abs_x); | |
| input_report_abs(dev, ABS_Y, priv->abs_y); | |
| input_report_key(dev, BTN_LEFT, priv->btn_left); | |
| input_report_key(dev, BTN_RIGHT, priv->btn_right); | |
| input_sync(dev); | |
| } | |
| static void byd_clear_touch(struct timer_list *t) | |
| { | |
| struct byd_data *priv = timer_container_of(priv, t, timer); | |
| struct psmouse *psmouse = priv->psmouse; | |
| guard(serio_pause_rx)(psmouse->ps2dev.serio); | |
| priv->touch = false; | |
| byd_report_input(psmouse); | |
| /* | |
| * Move cursor back to center of pad when we lose touch - this | |
| * specifically improves user experience when moving cursor with one | |
| * finger, and pressing a button with another. | |
| */ | |
| priv->abs_x = BYD_PAD_WIDTH / 2; | |
| priv->abs_y = BYD_PAD_HEIGHT / 2; | |
| } | |
| static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) | |
| { | |
| struct byd_data *priv = psmouse->private; | |
| u8 *pkt = psmouse->packet; | |
| if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) { | |
| psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n", | |
| pkt[0]); | |
| return PSMOUSE_BAD_DATA; | |
| } | |
| if (psmouse->pktcnt < psmouse->pktsize) | |
| return PSMOUSE_GOOD_DATA; | |
| /* Otherwise, a full packet has been received */ | |
| switch (pkt[3]) { | |
| case BYD_PACKET_ABSOLUTE: | |
| /* Only use absolute packets for the start of movement. */ | |
| if (!priv->touch) { | |
| /* needed to detect tap */ | |
| typeof(jiffies) tap_time = | |
| priv->last_touch_time + BYD_TOUCH_TIMEOUT; | |
| priv->touch = time_after(jiffies, tap_time); | |
| /* init abs position */ | |
| priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256); | |
| priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256); | |
| } | |
| break; | |
| case BYD_PACKET_RELATIVE: { | |
| /* Standard packet */ | |
| /* Sign-extend if a sign bit is set. */ | |
| u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; | |
| u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; | |
| s32 dx = signx | (int) pkt[1]; | |
| s32 dy = signy | (int) pkt[2]; | |
| /* Update position based on velocity */ | |
| priv->abs_x += dx * BYD_DT; | |
| priv->abs_y -= dy * BYD_DT; | |
| priv->touch = true; | |
| break; | |
| } | |
| default: | |
| psmouse_warn(psmouse, "Unrecognized Z: pkt = %*ph\n", | |
| 4, psmouse->packet); | |
| return PSMOUSE_BAD_DATA; | |
| } | |
| priv->btn_left = pkt[0] & PS2_LEFT; | |
| priv->btn_right = pkt[0] & PS2_RIGHT; | |
| byd_report_input(psmouse); | |
| /* Reset time since last touch. */ | |
| if (priv->touch) { | |
| priv->last_touch_time = jiffies; | |
| mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT); | |
| } | |
| return PSMOUSE_FULL_PACKET; | |
| } | |
| static int byd_reset_touchpad(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[4]; | |
| size_t i; | |
| static const struct { | |
| u16 command; | |
| u8 arg; | |
| } seq[] = { | |
| /* | |
| * Intellimouse initialization sequence, to get 4-byte instead | |
| * of 3-byte packets. | |
| */ | |
| { PSMOUSE_CMD_SETRATE, 0xC8 }, | |
| { PSMOUSE_CMD_SETRATE, 0x64 }, | |
| { PSMOUSE_CMD_SETRATE, 0x50 }, | |
| { PSMOUSE_CMD_GETID, 0 }, | |
| { PSMOUSE_CMD_ENABLE, 0 }, | |
| /* | |
| * BYD-specific initialization, which enables absolute mode and | |
| * (if desired), the touchpad's built-in gesture detection. | |
| */ | |
| { 0x10E2, 0x00 }, | |
| { 0x10E0, 0x02 }, | |
| /* The touchpad should reply with 4 seemingly-random bytes */ | |
| { 0x14E0, 0x01 }, | |
| /* Pairs of parameters and values. */ | |
| { BYD_CMD_SET_HANDEDNESS, 0x01 }, | |
| { BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 }, | |
| { BYD_CMD_SET_TAP, 0x02 }, | |
| { BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 }, | |
| { BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 }, | |
| { BYD_CMD_SET_EDGE_MOTION, 0x01 }, | |
| { BYD_CMD_SET_PALM_CHECK, 0x00 }, | |
| { BYD_CMD_SET_MULTITOUCH, 0x02 }, | |
| { BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 }, | |
| { BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 }, | |
| { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, | |
| { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, | |
| { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, | |
| { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, | |
| { BYD_CMD_SET_ABSOLUTE_MODE, 0x02 }, | |
| /* Finalize initialization. */ | |
| { 0x10E0, 0x00 }, | |
| { 0x10E2, 0x01 }, | |
| }; | |
| for (i = 0; i < ARRAY_SIZE(seq); ++i) { | |
| memset(param, 0, sizeof(param)); | |
| param[0] = seq[i].arg; | |
| if (ps2_command(ps2dev, param, seq[i].command)) | |
| return -EIO; | |
| } | |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); | |
| return 0; | |
| } | |
| static int byd_reconnect(struct psmouse *psmouse) | |
| { | |
| int retry = 0, error = 0; | |
| psmouse_dbg(psmouse, "Reconnect\n"); | |
| do { | |
| psmouse_reset(psmouse); | |
| if (retry) | |
| ssleep(1); | |
| error = byd_detect(psmouse, 0); | |
| } while (error && ++retry < 3); | |
| if (error) | |
| return error; | |
| psmouse_dbg(psmouse, "Reconnected after %d attempts\n", retry); | |
| error = byd_reset_touchpad(psmouse); | |
| if (error) { | |
| psmouse_err(psmouse, "Unable to initialize device\n"); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static void byd_disconnect(struct psmouse *psmouse) | |
| { | |
| struct byd_data *priv = psmouse->private; | |
| if (priv) { | |
| timer_delete(&priv->timer); | |
| kfree(psmouse->private); | |
| psmouse->private = NULL; | |
| } | |
| } | |
| int byd_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[4] = {0x03, 0x00, 0x00, 0x00}; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -1; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -1; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -1; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -1; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) | |
| return -1; | |
| if (param[1] != 0x03 || param[2] != 0x64) | |
| return -ENODEV; | |
| psmouse_dbg(psmouse, "BYD touchpad detected\n"); | |
| if (set_properties) { | |
| psmouse->vendor = "BYD"; | |
| psmouse->name = "TouchPad"; | |
| } | |
| return 0; | |
| } | |
| int byd_init(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| struct byd_data *priv; | |
| if (psmouse_reset(psmouse)) | |
| return -EIO; | |
| if (byd_reset_touchpad(psmouse)) | |
| return -EIO; | |
| priv = kzalloc_obj(*priv); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->psmouse = psmouse; | |
| timer_setup(&priv->timer, byd_clear_touch, 0); | |
| psmouse->private = priv; | |
| psmouse->disconnect = byd_disconnect; | |
| psmouse->reconnect = byd_reconnect; | |
| psmouse->protocol_handler = byd_process_byte; | |
| psmouse->pktsize = 4; | |
| psmouse->resync_time = 0; | |
| __set_bit(INPUT_PROP_POINTER, dev->propbit); | |
| /* Touchpad */ | |
| __set_bit(BTN_TOUCH, dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, dev->keybit); | |
| /* Buttons */ | |
| __set_bit(BTN_LEFT, dev->keybit); | |
| __set_bit(BTN_RIGHT, dev->keybit); | |
| __clear_bit(BTN_MIDDLE, dev->keybit); | |
| /* Absolute position */ | |
| __set_bit(EV_ABS, dev->evbit); | |
| input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0); | |
| input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0); | |
| input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION); | |
| input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION); | |
| /* No relative support */ | |
| __clear_bit(EV_REL, dev->evbit); | |
| __clear_bit(REL_X, dev->relbit); | |
| __clear_bit(REL_Y, dev->relbit); | |
| return 0; | |
| } |