| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Reset Controller framework | |
| * | |
| * Copyright 2013 Philipp Zabel, Pengutronix | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/atomic.h> | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/fwnode.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/gpio/machine.h> | |
| #include <linux/gpio/property.h> | |
| #include <linux/idr.h> | |
| #include <linux/kernel.h> | |
| #include <linux/kref.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/property.h> | |
| #include <linux/reset.h> | |
| #include <linux/reset-controller.h> | |
| #include <linux/slab.h> | |
| #include <linux/srcu.h> | |
| static DEFINE_MUTEX(reset_list_mutex); | |
| static LIST_HEAD(reset_controller_list); | |
| /* Protects reset_gpio_lookup_list */ | |
| static DEFINE_MUTEX(reset_gpio_lookup_mutex); | |
| static LIST_HEAD(reset_gpio_lookup_list); | |
| static DEFINE_IDA(reset_gpio_ida); | |
| /** | |
| * struct reset_control - a reset control | |
| * @rcdev: a pointer to the reset controller device | |
| * this reset control belongs to | |
| * @srcu: protects the rcdev pointer from removal during consumer access | |
| * @list: list entry for the rcdev's reset controller list | |
| * @id: ID of the reset controller in the reset | |
| * controller device | |
| * @refcnt: Number of gets of this reset_control | |
| * @acquired: Only one reset_control may be acquired for a given rcdev and id. | |
| * @shared: Is this a shared (1), or an exclusive (0) reset_control? | |
| * @array: Is this an array of reset controls (1)? | |
| * @deassert_count: Number of times this reset line has been deasserted | |
| * @triggered_count: Number of times this reset line has been reset. Currently | |
| * only used for shared resets, which means that the value | |
| * will be either 0 or 1. | |
| * @lock: serializes the internals of reset_control_acquire() | |
| */ | |
| struct reset_control { | |
| struct reset_controller_dev __rcu *rcdev; | |
| struct srcu_struct srcu; | |
| struct list_head list; | |
| unsigned int id; | |
| struct kref refcnt; | |
| bool acquired; | |
| bool shared; | |
| bool array; | |
| atomic_t deassert_count; | |
| atomic_t triggered_count; | |
| struct mutex lock; | |
| }; | |
| /** | |
| * struct reset_control_array - an array of reset controls | |
| * @base: reset control for compatibility with reset control API functions | |
| * @num_rstcs: number of reset controls | |
| * @rstc: array of reset controls | |
| */ | |
| struct reset_control_array { | |
| struct reset_control base; | |
| unsigned int num_rstcs; | |
| struct reset_control *rstc[] __counted_by(num_rstcs); | |
| }; | |
| /** | |
| * struct reset_gpio_lookup - lookup key for ad-hoc created reset-gpio devices | |
| * @ref_args: Reference to the reset controller with all the args like GPIO number | |
| * @swnode: Software node containing the reference to the GPIO provider | |
| * @list: list entry for the reset_gpio_lookup_list | |
| * @adev: Auxiliary device representing the reset controller | |
| */ | |
| struct reset_gpio_lookup { | |
| struct fwnode_reference_args ref_args; | |
| struct fwnode_handle *swnode; | |
| struct list_head list; | |
| struct auxiliary_device adev; | |
| }; | |
| static const char *rcdev_name(struct reset_controller_dev *rcdev) | |
| { | |
| if (rcdev->dev) | |
| return dev_name(rcdev->dev); | |
| if (rcdev->fwnode) | |
| return fwnode_get_name(rcdev->fwnode); | |
| return NULL; | |
| } | |
| /** | |
| * fwnode_reset_simple_xlate - translate reset_spec to the reset line number | |
| * @rcdev: a pointer to the reset controller device | |
| * @reset_spec: reset line specifier as found in firmware | |
| * | |
| * This static translation function is used by default if neither fwnode_xlate | |
| * not of_xlate in :c:type:`reset_controller_dev` is not set. It is useful for | |
| * all reset controllers with 1:1 mapping, where reset lines can be indexed by | |
| * number without gaps. | |
| */ | |
| static int fwnode_reset_simple_xlate(struct reset_controller_dev *rcdev, | |
| const struct fwnode_reference_args *reset_spec) | |
| { | |
| if (reset_spec->args[0] >= rcdev->nr_resets) | |
| return -EINVAL; | |
| return reset_spec->args[0]; | |
| } | |
| /** | |
| * reset_controller_register - register a reset controller device | |
| * @rcdev: a pointer to the initialized reset controller device | |
| */ | |
| int reset_controller_register(struct reset_controller_dev *rcdev) | |
| { | |
| if ((rcdev->of_node && rcdev->fwnode) || (rcdev->of_xlate && rcdev->fwnode_xlate)) | |
| return -EINVAL; | |
| if (rcdev->of_node && !rcdev->fwnode) | |
| rcdev->fwnode = of_fwnode_handle(rcdev->of_node); | |
| if (!rcdev->fwnode) { | |
| rcdev->fwnode = dev_fwnode(rcdev->dev); | |
| if (!rcdev->fwnode) | |
| return -EINVAL; | |
| } | |
| if (rcdev->of_xlate) | |
| rcdev->fwnode_reset_n_cells = rcdev->of_reset_n_cells; | |
| if (!rcdev->fwnode_xlate && !rcdev->of_xlate) { | |
| rcdev->fwnode_xlate = fwnode_reset_simple_xlate; | |
| rcdev->fwnode_reset_n_cells = 1; | |
| } | |
| INIT_LIST_HEAD(&rcdev->reset_control_head); | |
| mutex_init(&rcdev->lock); | |
| guard(mutex)(&reset_list_mutex); | |
| list_add(&rcdev->list, &reset_controller_list); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_controller_register); | |
| static void reset_controller_remove(struct reset_controller_dev *rcdev, | |
| struct reset_control *rstc) | |
| { | |
| lockdep_assert_held(&rcdev->lock); | |
| list_del(&rstc->list); | |
| module_put(rcdev->owner); | |
| put_device(rcdev->dev); | |
| } | |
| /** | |
| * reset_controller_unregister - unregister a reset controller device | |
| * @rcdev: a pointer to the reset controller device | |
| */ | |
| void reset_controller_unregister(struct reset_controller_dev *rcdev) | |
| { | |
| struct reset_control *rstc, *pos; | |
| scoped_guard(mutex, &reset_list_mutex) | |
| list_del(&rcdev->list); | |
| scoped_guard(mutex, &rcdev->lock) { | |
| /* | |
| * Numb but don't free the remaining reset control handles that are | |
| * still held by consumers. | |
| */ | |
| list_for_each_entry_safe(rstc, pos, &rcdev->reset_control_head, list) { | |
| rcu_assign_pointer(rstc->rcdev, NULL); | |
| synchronize_srcu(&rstc->srcu); | |
| reset_controller_remove(rcdev, rstc); | |
| } | |
| } | |
| mutex_destroy(&rcdev->lock); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_controller_unregister); | |
| static void devm_reset_controller_release(struct device *dev, void *res) | |
| { | |
| reset_controller_unregister(*(struct reset_controller_dev **)res); | |
| } | |
| /** | |
| * devm_reset_controller_register - resource managed reset_controller_register() | |
| * @dev: device that is registering this reset controller | |
| * @rcdev: a pointer to the initialized reset controller device | |
| * | |
| * Managed reset_controller_register(). For reset controllers registered by | |
| * this function, reset_controller_unregister() is automatically called on | |
| * driver detach. See reset_controller_register() for more information. | |
| */ | |
| int devm_reset_controller_register(struct device *dev, | |
| struct reset_controller_dev *rcdev) | |
| { | |
| struct reset_controller_dev **rcdevp; | |
| int ret; | |
| rcdevp = devres_alloc(devm_reset_controller_release, sizeof(*rcdevp), | |
| GFP_KERNEL); | |
| if (!rcdevp) | |
| return -ENOMEM; | |
| ret = reset_controller_register(rcdev); | |
| if (ret) { | |
| devres_free(rcdevp); | |
| return ret; | |
| } | |
| *rcdevp = rcdev; | |
| devres_add(dev, rcdevp); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(devm_reset_controller_register); | |
| static inline struct reset_control_array * | |
| rstc_to_array(struct reset_control *rstc) { | |
| return container_of(rstc, struct reset_control_array, base); | |
| } | |
| static int reset_control_array_reset(struct reset_control_array *resets) | |
| { | |
| int ret, i; | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| ret = reset_control_reset(resets->rstc[i]); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int reset_control_array_rearm(struct reset_control_array *resets) | |
| { | |
| struct reset_control *rstc; | |
| int i; | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| rstc = resets->rstc[i]; | |
| if (!rstc) | |
| continue; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (rstc->shared) { | |
| if (WARN_ON(atomic_read(&rstc->deassert_count) != 0)) | |
| return -EINVAL; | |
| } else { | |
| if (!rstc->acquired) | |
| return -EPERM; | |
| } | |
| } | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| rstc = resets->rstc[i]; | |
| if (rstc && rstc->shared) | |
| WARN_ON(atomic_dec_return(&rstc->triggered_count) < 0); | |
| } | |
| return 0; | |
| } | |
| static int reset_control_array_assert(struct reset_control_array *resets) | |
| { | |
| int ret, i; | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| ret = reset_control_assert(resets->rstc[i]); | |
| if (ret) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| while (i--) | |
| reset_control_deassert(resets->rstc[i]); | |
| return ret; | |
| } | |
| static int reset_control_array_deassert(struct reset_control_array *resets) | |
| { | |
| int ret, i; | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| ret = reset_control_deassert(resets->rstc[i]); | |
| if (ret) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| while (i--) | |
| reset_control_assert(resets->rstc[i]); | |
| return ret; | |
| } | |
| static int reset_control_array_acquire(struct reset_control_array *resets) | |
| { | |
| unsigned int i; | |
| int err; | |
| for (i = 0; i < resets->num_rstcs; i++) { | |
| err = reset_control_acquire(resets->rstc[i]); | |
| if (err < 0) | |
| goto release; | |
| } | |
| return 0; | |
| release: | |
| while (i--) | |
| reset_control_release(resets->rstc[i]); | |
| return err; | |
| } | |
| static void reset_control_array_release(struct reset_control_array *resets) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < resets->num_rstcs; i++) | |
| reset_control_release(resets->rstc[i]); | |
| } | |
| static inline bool reset_control_is_array(struct reset_control *rstc) | |
| { | |
| return rstc->array; | |
| } | |
| /** | |
| * reset_control_reset - reset the controlled device | |
| * @rstc: reset controller | |
| * | |
| * On a shared reset line the actual reset pulse is only triggered once for the | |
| * lifetime of the reset_control instance: for all but the first caller this is | |
| * a no-op. | |
| * Consumers must not use reset_control_(de)assert on shared reset lines when | |
| * reset_control_reset has been used. | |
| * | |
| * If rstc is NULL it is an optional reset and the function will just | |
| * return 0. | |
| */ | |
| int reset_control_reset(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| int ret; | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (reset_control_is_array(rstc)) | |
| return reset_control_array_reset(rstc_to_array(rstc)); | |
| guard(srcu)(&rstc->srcu); | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| return -ENODEV; | |
| if (!rcdev->ops->reset) | |
| return -ENOTSUPP; | |
| if (rstc->shared) { | |
| if (WARN_ON(atomic_read(&rstc->deassert_count) != 0)) | |
| return -EINVAL; | |
| if (atomic_inc_return(&rstc->triggered_count) != 1) | |
| return 0; | |
| } else { | |
| if (!rstc->acquired) | |
| return -EPERM; | |
| } | |
| ret = rcdev->ops->reset(rcdev, rstc->id); | |
| if (rstc->shared && ret) | |
| atomic_dec(&rstc->triggered_count); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_reset); | |
| /** | |
| * reset_control_bulk_reset - reset the controlled devices in order | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| * | |
| * Issue a reset on all provided reset controls, in order. | |
| * | |
| * See also: reset_control_reset() | |
| */ | |
| int reset_control_bulk_reset(int num_rstcs, | |
| struct reset_control_bulk_data *rstcs) | |
| { | |
| int ret, i; | |
| for (i = 0; i < num_rstcs; i++) { | |
| ret = reset_control_reset(rstcs[i].rstc); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_reset); | |
| /** | |
| * reset_control_rearm - allow shared reset line to be re-triggered | |
| * @rstc: reset controller | |
| * | |
| * On a shared reset line the actual reset pulse is only triggered once for the | |
| * lifetime of the reset_control instance, except if this call is used. | |
| * | |
| * Calls to this function must be balanced with calls to reset_control_reset, | |
| * a warning is thrown in case triggered_count ever dips below 0. | |
| * | |
| * Consumers must not use reset_control_(de)assert on shared reset lines when | |
| * reset_control_reset or reset_control_rearm have been used. | |
| * | |
| * If rstc is NULL the function will just return 0. | |
| */ | |
| int reset_control_rearm(struct reset_control *rstc) | |
| { | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (reset_control_is_array(rstc)) | |
| return reset_control_array_rearm(rstc_to_array(rstc)); | |
| if (rstc->shared) { | |
| if (WARN_ON(atomic_read(&rstc->deassert_count) != 0)) | |
| return -EINVAL; | |
| WARN_ON(atomic_dec_return(&rstc->triggered_count) < 0); | |
| } else { | |
| if (!rstc->acquired) | |
| return -EPERM; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_rearm); | |
| /** | |
| * reset_control_assert - asserts the reset line | |
| * @rstc: reset controller | |
| * | |
| * Calling this on an exclusive reset controller guarantees that the reset | |
| * will be asserted. When called on a shared reset controller the line may | |
| * still be deasserted, as long as other users keep it so. | |
| * | |
| * For shared reset controls a driver cannot expect the hw's registers and | |
| * internal state to be reset, but must be prepared for this to happen. | |
| * Consumers must not use reset_control_reset on shared reset lines when | |
| * reset_control_(de)assert has been used. | |
| * | |
| * If rstc is NULL it is an optional reset and the function will just | |
| * return 0. | |
| */ | |
| int reset_control_assert(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (reset_control_is_array(rstc)) | |
| return reset_control_array_assert(rstc_to_array(rstc)); | |
| guard(srcu)(&rstc->srcu); | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| return -ENODEV; | |
| if (rstc->shared) { | |
| if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) | |
| return -EINVAL; | |
| if (WARN_ON(atomic_read(&rstc->deassert_count) == 0)) | |
| return -EINVAL; | |
| if (atomic_dec_return(&rstc->deassert_count) != 0) | |
| return 0; | |
| /* | |
| * Shared reset controls allow the reset line to be in any state | |
| * after this call, so doing nothing is a valid option. | |
| */ | |
| if (!rcdev->ops->assert) | |
| return 0; | |
| } else { | |
| /* | |
| * If the reset controller does not implement .assert(), there | |
| * is no way to guarantee that the reset line is asserted after | |
| * this call. | |
| */ | |
| if (!rcdev->ops->assert) | |
| return -ENOTSUPP; | |
| if (!rstc->acquired) { | |
| WARN(1, "reset %s (ID: %u) is not acquired\n", | |
| rcdev_name(rcdev), rstc->id); | |
| return -EPERM; | |
| } | |
| } | |
| return rcdev->ops->assert(rcdev, rstc->id); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_assert); | |
| /** | |
| * reset_control_bulk_assert - asserts the reset lines in order | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| * | |
| * Assert the reset lines for all provided reset controls, in order. | |
| * If an assertion fails, already asserted resets are deasserted again. | |
| * | |
| * See also: reset_control_assert() | |
| */ | |
| int reset_control_bulk_assert(int num_rstcs, | |
| struct reset_control_bulk_data *rstcs) | |
| { | |
| int ret, i; | |
| for (i = 0; i < num_rstcs; i++) { | |
| ret = reset_control_assert(rstcs[i].rstc); | |
| if (ret) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| while (i--) | |
| reset_control_deassert(rstcs[i].rstc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_assert); | |
| /** | |
| * reset_control_deassert - deasserts the reset line | |
| * @rstc: reset controller | |
| * | |
| * After calling this function, the reset is guaranteed to be deasserted. | |
| * Consumers must not use reset_control_reset on shared reset lines when | |
| * reset_control_(de)assert has been used. | |
| * | |
| * If rstc is NULL it is an optional reset and the function will just | |
| * return 0. | |
| */ | |
| int reset_control_deassert(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (reset_control_is_array(rstc)) | |
| return reset_control_array_deassert(rstc_to_array(rstc)); | |
| guard(srcu)(&rstc->srcu); | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| return -ENODEV; | |
| if (rstc->shared) { | |
| if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) | |
| return -EINVAL; | |
| if (atomic_inc_return(&rstc->deassert_count) != 1) | |
| return 0; | |
| } else { | |
| if (!rstc->acquired) { | |
| WARN(1, "reset %s (ID: %u) is not acquired\n", | |
| rcdev_name(rcdev), rstc->id); | |
| return -EPERM; | |
| } | |
| } | |
| /* | |
| * If the reset controller does not implement .deassert(), we assume | |
| * that it handles self-deasserting reset lines via .reset(). In that | |
| * case, the reset lines are deasserted by default. If that is not the | |
| * case, the reset controller driver should implement .deassert() and | |
| * return -ENOTSUPP. | |
| */ | |
| if (!rcdev->ops->deassert) | |
| return 0; | |
| return rcdev->ops->deassert(rcdev, rstc->id); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_deassert); | |
| /** | |
| * reset_control_bulk_deassert - deasserts the reset lines in reverse order | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| * | |
| * Deassert the reset lines for all provided reset controls, in reverse order. | |
| * If a deassertion fails, already deasserted resets are asserted again. | |
| * | |
| * See also: reset_control_deassert() | |
| */ | |
| int reset_control_bulk_deassert(int num_rstcs, | |
| struct reset_control_bulk_data *rstcs) | |
| { | |
| int ret, i; | |
| for (i = num_rstcs - 1; i >= 0; i--) { | |
| ret = reset_control_deassert(rstcs[i].rstc); | |
| if (ret) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| while (i < num_rstcs) | |
| reset_control_assert(rstcs[i++].rstc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_deassert); | |
| /** | |
| * reset_control_status - returns a negative errno if not supported, a | |
| * positive value if the reset line is asserted, or zero if the reset | |
| * line is not asserted or if the desc is NULL (optional reset). | |
| * @rstc: reset controller | |
| */ | |
| int reset_control_status(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc)) || reset_control_is_array(rstc)) | |
| return -EINVAL; | |
| guard(srcu)(&rstc->srcu); | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| return -ENODEV; | |
| if (rcdev->ops->status) | |
| return rcdev->ops->status(rcdev, rstc->id); | |
| return -ENOTSUPP; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_status); | |
| /** | |
| * reset_control_acquire() - acquires a reset control for exclusive use | |
| * @rstc: reset control | |
| * | |
| * This is used to explicitly acquire a reset control for exclusive use. Note | |
| * that exclusive resets are requested as acquired by default. In order for a | |
| * second consumer to be able to control the reset, the first consumer has to | |
| * release it first. Typically the easiest way to achieve this is to call the | |
| * reset_control_get_exclusive_released() to obtain an instance of the reset | |
| * control. Such reset controls are not acquired by default. | |
| * | |
| * Consumers implementing shared access to an exclusive reset need to follow | |
| * a specific protocol in order to work together. Before consumers can change | |
| * a reset they must acquire exclusive access using reset_control_acquire(). | |
| * After they are done operating the reset, they must release exclusive access | |
| * with a call to reset_control_release(). Consumers are not granted exclusive | |
| * access to the reset as long as another consumer hasn't released a reset. | |
| * | |
| * See also: reset_control_release() | |
| */ | |
| int reset_control_acquire(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| struct reset_control *rc; | |
| if (!rstc) | |
| return 0; | |
| if (WARN_ON(IS_ERR(rstc))) | |
| return -EINVAL; | |
| if (reset_control_is_array(rstc)) | |
| return reset_control_array_acquire(rstc_to_array(rstc)); | |
| guard(mutex)(&rstc->lock); | |
| if (rstc->acquired) | |
| return 0; | |
| guard(srcu)(&rstc->srcu); | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| return -ENODEV; | |
| scoped_guard(mutex, &rcdev->lock) { | |
| list_for_each_entry(rc, &rcdev->reset_control_head, list) { | |
| if (rstc != rc && rstc->id == rc->id) { | |
| if (rc->acquired) | |
| return -EBUSY; | |
| } | |
| } | |
| } | |
| rstc->acquired = true; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_acquire); | |
| /** | |
| * reset_control_bulk_acquire - acquires reset controls for exclusive use | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| * | |
| * This is used to explicitly acquire reset controls requested with | |
| * reset_control_bulk_get_exclusive_release() for temporary exclusive use. | |
| * | |
| * See also: reset_control_acquire(), reset_control_bulk_release() | |
| */ | |
| int reset_control_bulk_acquire(int num_rstcs, | |
| struct reset_control_bulk_data *rstcs) | |
| { | |
| int ret, i; | |
| for (i = 0; i < num_rstcs; i++) { | |
| ret = reset_control_acquire(rstcs[i].rstc); | |
| if (ret) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| while (i--) | |
| reset_control_release(rstcs[i].rstc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_acquire); | |
| /** | |
| * reset_control_release() - releases exclusive access to a reset control | |
| * @rstc: reset control | |
| * | |
| * Releases exclusive access right to a reset control previously obtained by a | |
| * call to reset_control_acquire(). Until a consumer calls this function, no | |
| * other consumers will be granted exclusive access. | |
| * | |
| * See also: reset_control_acquire() | |
| */ | |
| void reset_control_release(struct reset_control *rstc) | |
| { | |
| if (!rstc || WARN_ON(IS_ERR(rstc))) | |
| return; | |
| if (reset_control_is_array(rstc)) | |
| reset_control_array_release(rstc_to_array(rstc)); | |
| else | |
| rstc->acquired = false; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_release); | |
| /** | |
| * reset_control_bulk_release() - releases exclusive access to reset controls | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| * | |
| * Releases exclusive access right to reset controls previously obtained by a | |
| * call to reset_control_bulk_acquire(). | |
| * | |
| * See also: reset_control_release(), reset_control_bulk_acquire() | |
| */ | |
| void reset_control_bulk_release(int num_rstcs, | |
| struct reset_control_bulk_data *rstcs) | |
| { | |
| int i; | |
| for (i = 0; i < num_rstcs; i++) | |
| reset_control_release(rstcs[i].rstc); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_release); | |
| static struct reset_control * | |
| __reset_control_get_internal(struct reset_controller_dev *rcdev, | |
| unsigned int index, enum reset_control_flags flags) | |
| { | |
| bool shared = flags & RESET_CONTROL_FLAGS_BIT_SHARED; | |
| bool acquired = flags & RESET_CONTROL_FLAGS_BIT_ACQUIRED; | |
| struct reset_control *rstc; | |
| int ret; | |
| lockdep_assert_held(&rcdev->lock); | |
| /* Expect callers to filter out OPTIONAL and DEASSERTED bits */ | |
| if (WARN_ON(flags & ~(RESET_CONTROL_FLAGS_BIT_SHARED | | |
| RESET_CONTROL_FLAGS_BIT_ACQUIRED))) | |
| return ERR_PTR(-EINVAL); | |
| list_for_each_entry(rstc, &rcdev->reset_control_head, list) { | |
| if (rstc->id == index) { | |
| /* | |
| * Allow creating a secondary exclusive reset_control | |
| * that is initially not acquired for an already | |
| * controlled reset line. | |
| */ | |
| if (!rstc->shared && !shared && !acquired) | |
| break; | |
| if (WARN_ON(!rstc->shared || !shared)) | |
| return ERR_PTR(-EBUSY); | |
| kref_get(&rstc->refcnt); | |
| return rstc; | |
| } | |
| } | |
| rstc = kzalloc_obj(*rstc); | |
| if (!rstc) | |
| return ERR_PTR(-ENOMEM); | |
| ret = init_srcu_struct(&rstc->srcu); | |
| if (ret) { | |
| kfree(rstc); | |
| return ERR_PTR(ret); | |
| } | |
| if (!try_module_get(rcdev->owner)) { | |
| cleanup_srcu_struct(&rstc->srcu); | |
| kfree(rstc); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| rcu_assign_pointer(rstc->rcdev, rcdev); | |
| list_add(&rstc->list, &rcdev->reset_control_head); | |
| rstc->id = index; | |
| kref_init(&rstc->refcnt); | |
| mutex_init(&rstc->lock); | |
| rstc->acquired = acquired; | |
| rstc->shared = shared; | |
| get_device(rcdev->dev); | |
| return rstc; | |
| } | |
| static void __reset_control_release(struct kref *kref) | |
| { | |
| struct reset_control *rstc = container_of(kref, struct reset_control, | |
| refcnt); | |
| struct reset_controller_dev *rcdev; | |
| lockdep_assert_held(&rstc->srcu); | |
| rcdev = rcu_replace_pointer(rstc->rcdev, NULL, true); | |
| if (rcdev) { | |
| lockdep_assert_held(&rcdev->lock); | |
| reset_controller_remove(rcdev, rstc); | |
| } | |
| mutex_destroy(&rstc->lock); | |
| } | |
| static void reset_control_put_internal(struct reset_control *rstc) | |
| { | |
| struct reset_controller_dev *rcdev; | |
| int ret = 0; | |
| if (IS_ERR_OR_NULL(rstc)) | |
| return; | |
| scoped_guard(srcu, &rstc->srcu) { | |
| rcdev = srcu_dereference(rstc->rcdev, &rstc->srcu); | |
| if (!rcdev) | |
| /* Already released. */ | |
| return; | |
| guard(mutex)(&rcdev->lock); | |
| ret = kref_put(&rstc->refcnt, __reset_control_release); | |
| } | |
| if (ret) { | |
| synchronize_srcu(&rstc->srcu); | |
| cleanup_srcu_struct(&rstc->srcu); | |
| kfree(rstc); | |
| } | |
| } | |
| static void reset_gpio_aux_device_release(struct device *dev) | |
| { | |
| WARN(1, "reset-gpio device %s should never have been removed", dev_name(dev)); | |
| } | |
| static int reset_create_gpio_aux_device(struct reset_gpio_lookup *rgpio_dev, | |
| struct device *parent) | |
| { | |
| struct auxiliary_device *adev = &rgpio_dev->adev; | |
| int ret, id; | |
| id = ida_alloc(&reset_gpio_ida, GFP_KERNEL); | |
| if (id < 0) | |
| return -ENOMEM; | |
| adev->id = id; | |
| adev->name = "gpio"; | |
| adev->dev.parent = parent; | |
| adev->dev.platform_data = &rgpio_dev->ref_args; | |
| adev->dev.release = reset_gpio_aux_device_release; | |
| device_set_node(&adev->dev, rgpio_dev->swnode); | |
| ret = auxiliary_device_init(adev); | |
| if (ret) { | |
| ida_free(&reset_gpio_ida, id); | |
| return ret; | |
| } | |
| ret = __auxiliary_device_add(adev, "reset"); | |
| if (ret) { | |
| auxiliary_device_uninit(adev); | |
| ida_free(&reset_gpio_ida, id); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void reset_gpio_add_devlink(struct fwnode_handle *fwnode, | |
| struct reset_gpio_lookup *rgpio_dev) | |
| { | |
| struct device *consumer; | |
| /* | |
| * We must use get_dev_from_fwnode() and not ref_find_device_by_node() | |
| * because the latter only considers the platform bus while we want to | |
| * get consumers of any kind that can be associated with firmware | |
| * nodes: auxiliary, soundwire, etc. | |
| */ | |
| consumer = get_dev_from_fwnode(fwnode); | |
| if (consumer) { | |
| if (!device_link_add(consumer, &rgpio_dev->adev.dev, | |
| DL_FLAG_AUTOREMOVE_CONSUMER)) | |
| pr_warn("Failed to create a device link between reset-gpio and its consumer"); | |
| put_device(consumer); | |
| } | |
| /* | |
| * else { } | |
| * | |
| * TODO: If ever there's a case where we need to support shared | |
| * reset-gpios retrieved from a device node for which there's no | |
| * device present yet, this is where we'd set up a notifier waiting | |
| * for the device to appear in the system. This would be a lot of code | |
| * that would go unused for now so let's cross that bridge when and if | |
| * we get there. | |
| */ | |
| } | |
| /* TODO: move it out into drivers/base/ */ | |
| static bool fwnode_reference_args_equal(const struct fwnode_reference_args *left, | |
| const struct fwnode_reference_args *right) | |
| { | |
| return left->fwnode == right->fwnode && left->nargs == right->nargs && | |
| !memcmp(left->args, right->args, sizeof(left->args[0]) * left->nargs); | |
| } | |
| /* | |
| * @np: OF-node associated with the consumer | |
| * @args: Reference to the GPIO provider with all the args like GPIO number | |
| */ | |
| static int __reset_add_reset_gpio_device(struct fwnode_handle *fwnode, | |
| const struct fwnode_reference_args *args) | |
| { | |
| struct property_entry properties[3] = { }; | |
| unsigned int offset, flags, lflags; | |
| struct reset_gpio_lookup *rgpio_dev; | |
| struct device *parent; | |
| int ret, prop = 0; | |
| /* | |
| * Currently only #gpio-cells=2 is supported with the meaning of: | |
| * args[0]: GPIO number | |
| * args[1]: GPIO flags | |
| * TODO: Handle other cases. | |
| */ | |
| if (args->nargs != 2) | |
| return -ENOENT; | |
| /* | |
| * Registering reset-gpio device might cause immediate | |
| * bind, resulting in its probe() registering new reset controller thus | |
| * taking reset_list_mutex lock via reset_controller_register(). | |
| */ | |
| lockdep_assert_not_held(&reset_list_mutex); | |
| offset = args->args[0]; | |
| flags = args->args[1]; | |
| /* | |
| * Later we map GPIO flags between OF and Linux, however not all | |
| * constants from include/dt-bindings/gpio/gpio.h and | |
| * include/linux/gpio/machine.h match each other. | |
| * | |
| * FIXME: Find a better way of translating OF flags to GPIO lookup | |
| * flags. | |
| */ | |
| if (flags > GPIO_ACTIVE_LOW) { | |
| pr_err("reset-gpio code does not support GPIO flags %u for GPIO %u\n", | |
| flags, offset); | |
| return -EINVAL; | |
| } | |
| struct gpio_device *gdev __free(gpio_device_put) = | |
| gpio_device_find_by_fwnode(args->fwnode); | |
| if (!gdev) | |
| return -EPROBE_DEFER; | |
| guard(mutex)(&reset_gpio_lookup_mutex); | |
| list_for_each_entry(rgpio_dev, &reset_gpio_lookup_list, list) { | |
| if (fwnode_reference_args_equal(args, &rgpio_dev->ref_args)) { | |
| /* | |
| * Already on the list, create the device link | |
| * and stop here. | |
| */ | |
| reset_gpio_add_devlink(fwnode, rgpio_dev); | |
| return 0; | |
| } | |
| } | |
| lflags = GPIO_PERSISTENT | (flags & GPIO_ACTIVE_LOW); | |
| parent = gpio_device_to_device(gdev); | |
| properties[prop++] = PROPERTY_ENTRY_STRING("compatible", "reset-gpio"); | |
| properties[prop++] = PROPERTY_ENTRY_GPIO("reset-gpios", parent->fwnode, offset, lflags); | |
| /* Not freed on success, because it is persisent subsystem data. */ | |
| rgpio_dev = kzalloc_obj(*rgpio_dev); | |
| if (!rgpio_dev) | |
| return -ENOMEM; | |
| rgpio_dev->ref_args = *args; | |
| /* | |
| * We keep the fwnode_handle reference, but ref_args.fwnode is put at | |
| * the end of __fwnode_reset_control_get(), so get it one more time. | |
| * Hold reference as long as rgpio_dev memory is valid. | |
| */ | |
| fwnode_handle_get(rgpio_dev->ref_args.fwnode); | |
| rgpio_dev->swnode = fwnode_create_software_node(properties, NULL); | |
| if (IS_ERR(rgpio_dev->swnode)) { | |
| ret = PTR_ERR(rgpio_dev->swnode); | |
| goto err_put_fwnode; | |
| } | |
| ret = reset_create_gpio_aux_device(rgpio_dev, parent); | |
| if (ret) | |
| goto err_del_swnode; | |
| reset_gpio_add_devlink(fwnode, rgpio_dev); | |
| list_add(&rgpio_dev->list, &reset_gpio_lookup_list); | |
| return 0; | |
| err_del_swnode: | |
| fwnode_remove_software_node(rgpio_dev->swnode); | |
| err_put_fwnode: | |
| fwnode_handle_put(rgpio_dev->ref_args.fwnode); | |
| kfree(rgpio_dev); | |
| return ret; | |
| } | |
| static struct reset_controller_dev * | |
| __reset_find_rcdev(const struct fwnode_reference_args *args, bool gpio_fallback) | |
| { | |
| struct fwnode_reference_args *rc_args; | |
| struct reset_controller_dev *rcdev; | |
| lockdep_assert_held(&reset_list_mutex); | |
| list_for_each_entry(rcdev, &reset_controller_list, list) { | |
| if (gpio_fallback && rcdev->dev && | |
| device_is_compatible(rcdev->dev, "reset-gpio")) { | |
| rc_args = dev_get_platdata(rcdev->dev); | |
| if (fwnode_reference_args_equal(args, rc_args)) | |
| return rcdev; | |
| } else { | |
| if (args->fwnode == rcdev->fwnode) | |
| return rcdev; | |
| } | |
| } | |
| return NULL; | |
| } | |
| struct reset_control * | |
| __fwnode_reset_control_get(struct fwnode_handle *fwnode, const char *id, int index, | |
| enum reset_control_flags flags) | |
| { | |
| bool optional = flags & RESET_CONTROL_FLAGS_BIT_OPTIONAL; | |
| bool gpio_fallback = false; | |
| struct reset_control *rstc = ERR_PTR(-EINVAL); | |
| struct reset_controller_dev *rcdev; | |
| struct fwnode_reference_args args; | |
| struct of_phandle_args of_args; | |
| int rstc_id = -EINVAL; | |
| int ret; | |
| if (!fwnode) | |
| return ERR_PTR(-EINVAL); | |
| if (id) { | |
| index = fwnode_property_match_string(fwnode, "reset-names", id); | |
| if (index == -EILSEQ) | |
| return ERR_PTR(index); | |
| if (index < 0) | |
| return optional ? NULL : ERR_PTR(-ENOENT); | |
| } | |
| ret = fwnode_property_get_reference_args(fwnode, "resets", "#reset-cells", | |
| 0, index, &args); | |
| if (ret == -EINVAL) | |
| return ERR_PTR(ret); | |
| if (ret) { | |
| if (!IS_ENABLED(CONFIG_RESET_GPIO)) | |
| return optional ? NULL : ERR_PTR(ret); | |
| /* | |
| * There can be only one reset-gpio for regular devices, so | |
| * don't bother with the "reset-gpios" phandle index. | |
| */ | |
| ret = fwnode_property_get_reference_args(fwnode, "reset-gpios", | |
| "#gpio-cells", 0, 0, &args); | |
| if (ret) | |
| return optional ? NULL : ERR_PTR(ret); | |
| gpio_fallback = true; | |
| ret = __reset_add_reset_gpio_device(fwnode, &args); | |
| if (ret) { | |
| fwnode_handle_put(args.fwnode); | |
| return ERR_PTR(ret); | |
| } | |
| } | |
| guard(mutex)(&reset_list_mutex); | |
| rcdev = __reset_find_rcdev(&args, gpio_fallback); | |
| if (!rcdev) { | |
| rstc = ERR_PTR(-EPROBE_DEFER); | |
| goto out_put; | |
| } | |
| if (WARN_ON(args.nargs != rcdev->fwnode_reset_n_cells)) { | |
| rstc = ERR_PTR(-EINVAL); | |
| goto out_put; | |
| } | |
| if (rcdev->of_xlate && is_of_node(fwnode)) { | |
| ret = of_parse_phandle_with_args(to_of_node(fwnode), | |
| gpio_fallback ? "reset-gpios" : "resets", | |
| gpio_fallback ? "#gpio-cells" : "#reset-cells", | |
| gpio_fallback ? 0 : index, | |
| &of_args); | |
| if (ret) { | |
| rstc = ERR_PTR(ret); | |
| goto out_put; | |
| } | |
| rstc_id = rcdev->of_xlate(rcdev, &of_args); | |
| of_node_put(of_args.np); | |
| } else if (rcdev->fwnode_xlate) { | |
| rstc_id = rcdev->fwnode_xlate(rcdev, &args); | |
| } | |
| if (rstc_id < 0) { | |
| rstc = ERR_PTR(rstc_id); | |
| goto out_put; | |
| } | |
| flags &= ~RESET_CONTROL_FLAGS_BIT_OPTIONAL; | |
| scoped_guard(mutex, &rcdev->lock) | |
| rstc = __reset_control_get_internal(rcdev, rstc_id, flags); | |
| out_put: | |
| fwnode_handle_put(args.fwnode); | |
| return rstc; | |
| } | |
| EXPORT_SYMBOL_GPL(__fwnode_reset_control_get); | |
| struct reset_control *__reset_control_get(struct device *dev, const char *id, | |
| int index, enum reset_control_flags flags) | |
| { | |
| bool shared = flags & RESET_CONTROL_FLAGS_BIT_SHARED; | |
| bool acquired = flags & RESET_CONTROL_FLAGS_BIT_ACQUIRED; | |
| bool optional = flags & RESET_CONTROL_FLAGS_BIT_OPTIONAL; | |
| struct fwnode_handle *fwnode = dev_fwnode(dev); | |
| if (WARN_ON(shared && acquired)) | |
| return ERR_PTR(-EINVAL); | |
| if (fwnode) | |
| return __fwnode_reset_control_get(fwnode, id, index, flags); | |
| return optional ? NULL : ERR_PTR(-ENOENT); | |
| } | |
| EXPORT_SYMBOL_GPL(__reset_control_get); | |
| int __reset_control_bulk_get(struct device *dev, int num_rstcs, | |
| struct reset_control_bulk_data *rstcs, | |
| enum reset_control_flags flags) | |
| { | |
| int ret, i; | |
| for (i = 0; i < num_rstcs; i++) { | |
| rstcs[i].rstc = __reset_control_get(dev, rstcs[i].id, 0, flags); | |
| if (IS_ERR(rstcs[i].rstc)) { | |
| ret = PTR_ERR(rstcs[i].rstc); | |
| goto err; | |
| } | |
| } | |
| return 0; | |
| err: | |
| while (i--) | |
| reset_control_put_internal(rstcs[i].rstc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__reset_control_bulk_get); | |
| static void reset_control_array_put(struct reset_control_array *resets) | |
| { | |
| int i; | |
| for (i = 0; i < resets->num_rstcs; i++) | |
| reset_control_put_internal(resets->rstc[i]); | |
| kfree(resets); | |
| } | |
| /** | |
| * reset_control_put - free the reset controller | |
| * @rstc: reset controller | |
| */ | |
| void reset_control_put(struct reset_control *rstc) | |
| { | |
| if (IS_ERR_OR_NULL(rstc)) | |
| return; | |
| if (reset_control_is_array(rstc)) { | |
| reset_control_array_put(rstc_to_array(rstc)); | |
| return; | |
| } | |
| reset_control_put_internal(rstc); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_put); | |
| /** | |
| * reset_control_bulk_put - free the reset controllers | |
| * @num_rstcs: number of entries in rstcs array | |
| * @rstcs: array of struct reset_control_bulk_data with reset controls set | |
| */ | |
| void reset_control_bulk_put(int num_rstcs, struct reset_control_bulk_data *rstcs) | |
| { | |
| while (num_rstcs--) | |
| reset_control_put_internal(rstcs[num_rstcs].rstc); | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_bulk_put); | |
| static void devm_reset_control_release(struct device *dev, void *res) | |
| { | |
| reset_control_put(*(struct reset_control **)res); | |
| } | |
| static void devm_reset_control_release_deasserted(struct device *dev, void *res) | |
| { | |
| struct reset_control *rstc = *(struct reset_control **)res; | |
| reset_control_assert(rstc); | |
| reset_control_put(rstc); | |
| } | |
| struct reset_control * | |
| __devm_reset_control_get(struct device *dev, const char *id, int index, | |
| enum reset_control_flags flags) | |
| { | |
| struct reset_control **ptr, *rstc; | |
| bool deasserted = flags & RESET_CONTROL_FLAGS_BIT_DEASSERTED; | |
| ptr = devres_alloc(deasserted ? devm_reset_control_release_deasserted : | |
| devm_reset_control_release, sizeof(*ptr), | |
| GFP_KERNEL); | |
| if (!ptr) | |
| return ERR_PTR(-ENOMEM); | |
| flags &= ~RESET_CONTROL_FLAGS_BIT_DEASSERTED; | |
| rstc = __reset_control_get(dev, id, index, flags); | |
| if (IS_ERR_OR_NULL(rstc)) { | |
| devres_free(ptr); | |
| return rstc; | |
| } | |
| if (deasserted) { | |
| int ret; | |
| ret = reset_control_deassert(rstc); | |
| if (ret) { | |
| reset_control_put(rstc); | |
| devres_free(ptr); | |
| return ERR_PTR(ret); | |
| } | |
| } | |
| *ptr = rstc; | |
| devres_add(dev, ptr); | |
| return rstc; | |
| } | |
| EXPORT_SYMBOL_GPL(__devm_reset_control_get); | |
| struct reset_control_bulk_devres { | |
| int num_rstcs; | |
| struct reset_control_bulk_data *rstcs; | |
| }; | |
| static void devm_reset_control_bulk_release(struct device *dev, void *res) | |
| { | |
| struct reset_control_bulk_devres *devres = res; | |
| reset_control_bulk_put(devres->num_rstcs, devres->rstcs); | |
| } | |
| static void devm_reset_control_bulk_release_deasserted(struct device *dev, void *res) | |
| { | |
| struct reset_control_bulk_devres *devres = res; | |
| reset_control_bulk_assert(devres->num_rstcs, devres->rstcs); | |
| reset_control_bulk_put(devres->num_rstcs, devres->rstcs); | |
| } | |
| int __devm_reset_control_bulk_get(struct device *dev, int num_rstcs, | |
| struct reset_control_bulk_data *rstcs, | |
| enum reset_control_flags flags) | |
| { | |
| struct reset_control_bulk_devres *ptr; | |
| bool deasserted = flags & RESET_CONTROL_FLAGS_BIT_DEASSERTED; | |
| int ret; | |
| ptr = devres_alloc(deasserted ? devm_reset_control_bulk_release_deasserted : | |
| devm_reset_control_bulk_release, sizeof(*ptr), | |
| GFP_KERNEL); | |
| if (!ptr) | |
| return -ENOMEM; | |
| flags &= ~RESET_CONTROL_FLAGS_BIT_DEASSERTED; | |
| ret = __reset_control_bulk_get(dev, num_rstcs, rstcs, flags); | |
| if (ret < 0) { | |
| devres_free(ptr); | |
| return ret; | |
| } | |
| if (deasserted) { | |
| ret = reset_control_bulk_deassert(num_rstcs, rstcs); | |
| if (ret) { | |
| reset_control_bulk_put(num_rstcs, rstcs); | |
| devres_free(ptr); | |
| return ret; | |
| } | |
| } | |
| ptr->num_rstcs = num_rstcs; | |
| ptr->rstcs = rstcs; | |
| devres_add(dev, ptr); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(__devm_reset_control_bulk_get); | |
| /** | |
| * __device_reset - find reset controller associated with the device | |
| * and perform reset | |
| * @dev: device to be reset by the controller | |
| * @optional: whether it is optional to reset the device | |
| * | |
| * Convenience wrapper for __reset_control_get() and reset_control_reset(). | |
| * This is useful for the common case of devices with single, dedicated reset | |
| * lines. _RST firmware method will be called for devices with ACPI. | |
| */ | |
| int __device_reset(struct device *dev, bool optional) | |
| { | |
| enum reset_control_flags flags; | |
| struct reset_control *rstc; | |
| int ret; | |
| #ifdef CONFIG_ACPI | |
| acpi_handle handle = ACPI_HANDLE(dev); | |
| if (handle) { | |
| if (!acpi_has_method(handle, "_RST")) | |
| return optional ? 0 : -ENOENT; | |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_RST", NULL, | |
| NULL))) | |
| return -EIO; | |
| } | |
| #endif | |
| flags = optional ? RESET_CONTROL_OPTIONAL_EXCLUSIVE : RESET_CONTROL_EXCLUSIVE; | |
| rstc = __reset_control_get(dev, NULL, 0, flags); | |
| if (IS_ERR(rstc)) | |
| return PTR_ERR(rstc); | |
| ret = reset_control_reset(rstc); | |
| reset_control_put(rstc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__device_reset); | |
| /* | |
| * APIs to manage an array of reset controls. | |
| */ | |
| /** | |
| * fwnode_reset_control_get_count - Count number of resets available with a device | |
| * | |
| * @fwnode: firmware node that contains 'resets'. | |
| * | |
| * Returns positive reset count on success, or error number on failure and | |
| * on count being zero. | |
| */ | |
| static int fwnode_reset_control_get_count(struct fwnode_handle *fwnode) | |
| { | |
| struct fwnode_reference_args args; | |
| int count = 0, ret; | |
| if (!fwnode) | |
| return -EINVAL; | |
| for (;;) { | |
| ret = fwnode_property_get_reference_args(fwnode, "resets", "#reset-cells", | |
| 0, count, &args); | |
| if (ret) { | |
| if (ret == -ENOENT) | |
| break; | |
| return ret; | |
| } | |
| fwnode_handle_put(args.fwnode); | |
| count++; | |
| } | |
| if (count == 0) | |
| count = -ENOENT; | |
| return count; | |
| } | |
| /** | |
| * fwnode_reset_control_array_get - Get a list of reset controls using | |
| * a firmware node. | |
| * | |
| * @fwnode: firmware node for the device that requests the reset controls array | |
| * @flags: whether reset controls are shared, optional, acquired | |
| * | |
| * Returns pointer to allocated reset_control on success or error on failure | |
| */ | |
| struct reset_control * | |
| fwnode_reset_control_array_get(struct fwnode_handle *fwnode, | |
| enum reset_control_flags flags) | |
| { | |
| bool optional = flags & RESET_CONTROL_FLAGS_BIT_OPTIONAL; | |
| struct reset_control_array *resets; | |
| struct reset_control *rstc; | |
| int num, i; | |
| num = fwnode_reset_control_get_count(fwnode); | |
| if (num < 0) | |
| return optional ? NULL : ERR_PTR(num); | |
| resets = kzalloc_flex(*resets, rstc, num); | |
| if (!resets) | |
| return ERR_PTR(-ENOMEM); | |
| resets->num_rstcs = num; | |
| for (i = 0; i < num; i++) { | |
| rstc = __fwnode_reset_control_get(fwnode, NULL, i, flags); | |
| if (IS_ERR(rstc)) | |
| goto err_rst; | |
| resets->rstc[i] = rstc; | |
| } | |
| resets->base.array = true; | |
| return &resets->base; | |
| err_rst: | |
| while (--i >= 0) | |
| reset_control_put_internal(resets->rstc[i]); | |
| kfree(resets); | |
| return rstc; | |
| } | |
| EXPORT_SYMBOL_GPL(fwnode_reset_control_array_get); | |
| /** | |
| * devm_reset_control_array_get - Resource managed reset control array get | |
| * | |
| * @dev: device that requests the list of reset controls | |
| * @flags: whether reset controls are shared, optional, acquired | |
| * | |
| * The reset control array APIs are intended for a list of resets | |
| * that just have to be asserted or deasserted, without any | |
| * requirements on the order. | |
| * | |
| * Returns pointer to allocated reset_control on success or error on failure | |
| */ | |
| struct reset_control * | |
| devm_reset_control_array_get(struct device *dev, enum reset_control_flags flags) | |
| { | |
| struct reset_control **ptr, *rstc; | |
| ptr = devres_alloc(devm_reset_control_release, sizeof(*ptr), | |
| GFP_KERNEL); | |
| if (!ptr) | |
| return ERR_PTR(-ENOMEM); | |
| rstc = fwnode_reset_control_array_get(dev_fwnode(dev), flags); | |
| if (IS_ERR_OR_NULL(rstc)) { | |
| devres_free(ptr); | |
| return rstc; | |
| } | |
| *ptr = rstc; | |
| devres_add(dev, ptr); | |
| return rstc; | |
| } | |
| EXPORT_SYMBOL_GPL(devm_reset_control_array_get); | |
| /** | |
| * reset_control_get_count - Count number of resets available with a device | |
| * | |
| * @dev: device for which to return the number of resets | |
| * | |
| * Returns positive reset count on success, or error number on failure and | |
| * on count being zero. | |
| */ | |
| int reset_control_get_count(struct device *dev) | |
| { | |
| struct fwnode_handle *fwnode = dev_fwnode(dev); | |
| if (fwnode) | |
| return fwnode_reset_control_get_count(fwnode); | |
| return -ENOENT; | |
| } | |
| EXPORT_SYMBOL_GPL(reset_control_get_count); |