| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| /* SCTP kernel implementation | |
| * (C) Copyright IBM Corp. 2001, 2004 | |
| * Copyright (c) 1999-2000 Cisco, Inc. | |
| * Copyright (c) 1999-2001 Motorola, Inc. | |
| * Copyright (c) 2001 Intel Corp. | |
| * | |
| * This file is part of the SCTP kernel implementation | |
| * | |
| * Please send any bug reports or fixes you make to the | |
| * email address(es): | |
| * lksctp developers <linux-sctp@vger.kernel.org> | |
| * | |
| * Written or modified by: | |
| * La Monte H.P. Yarroll <piggy@acm.org> | |
| * Karl Knutson <karl@athena.chicago.il.us> | |
| * Randall Stewart <randall@stewart.chicago.il.us> | |
| * Ken Morneau <kmorneau@cisco.com> | |
| * Qiaobing Xie <qxie1@motorola.com> | |
| * Xingang Guo <xingang.guo@intel.com> | |
| * Sridhar Samudrala <samudrala@us.ibm.com> | |
| * Daisy Chang <daisyc@us.ibm.com> | |
| */ | |
| #ifndef __sctp_constants_h__ | |
| #define __sctp_constants_h__ | |
| #include <linux/sctp.h> | |
| #include <linux/ipv6.h> /* For ipv6hdr. */ | |
| #include <net/tcp_states.h> /* For TCP states used in enum sctp_sock_state */ | |
| /* Value used for stream negotiation. */ | |
| enum { SCTP_MAX_STREAM = 0xffff }; | |
| enum { SCTP_DEFAULT_OUTSTREAMS = 10 }; | |
| enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM }; | |
| /* Since CIDs are sparse, we need all four of the following | |
| * symbols. CIDs are dense through SCTP_CID_BASE_MAX. | |
| */ | |
| #define SCTP_CID_BASE_MAX SCTP_CID_SHUTDOWN_COMPLETE | |
| #define SCTP_NUM_BASE_CHUNK_TYPES (SCTP_CID_BASE_MAX + 1) | |
| #define SCTP_NUM_ADDIP_CHUNK_TYPES 2 | |
| #define SCTP_NUM_PRSCTP_CHUNK_TYPES 1 | |
| #define SCTP_NUM_RECONF_CHUNK_TYPES 1 | |
| #define SCTP_NUM_AUTH_CHUNK_TYPES 1 | |
| #define SCTP_NUM_CHUNK_TYPES (SCTP_NUM_BASE_CHUNK_TYPES + \ | |
| SCTP_NUM_ADDIP_CHUNK_TYPES +\ | |
| SCTP_NUM_PRSCTP_CHUNK_TYPES +\ | |
| SCTP_NUM_RECONF_CHUNK_TYPES +\ | |
| SCTP_NUM_AUTH_CHUNK_TYPES) | |
| /* These are the different flavours of event. */ | |
| enum sctp_event_type { | |
| SCTP_EVENT_T_CHUNK = 1, | |
| SCTP_EVENT_T_TIMEOUT, | |
| SCTP_EVENT_T_OTHER, | |
| SCTP_EVENT_T_PRIMITIVE | |
| }; | |
| /* As a convenience for the state machine, we append SCTP_EVENT_* and | |
| * SCTP_ULP_* to the list of possible chunks. | |
| */ | |
| enum sctp_event_timeout { | |
| SCTP_EVENT_TIMEOUT_NONE = 0, | |
| SCTP_EVENT_TIMEOUT_T1_COOKIE, | |
| SCTP_EVENT_TIMEOUT_T1_INIT, | |
| SCTP_EVENT_TIMEOUT_T2_SHUTDOWN, | |
| SCTP_EVENT_TIMEOUT_T3_RTX, | |
| SCTP_EVENT_TIMEOUT_T4_RTO, | |
| SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD, | |
| SCTP_EVENT_TIMEOUT_HEARTBEAT, | |
| SCTP_EVENT_TIMEOUT_RECONF, | |
| SCTP_EVENT_TIMEOUT_PROBE, | |
| SCTP_EVENT_TIMEOUT_SACK, | |
| SCTP_EVENT_TIMEOUT_AUTOCLOSE, | |
| }; | |
| #define SCTP_EVENT_TIMEOUT_MAX SCTP_EVENT_TIMEOUT_AUTOCLOSE | |
| #define SCTP_NUM_TIMEOUT_TYPES (SCTP_EVENT_TIMEOUT_MAX + 1) | |
| enum sctp_event_other { | |
| SCTP_EVENT_NO_PENDING_TSN = 0, | |
| SCTP_EVENT_ICMP_PROTO_UNREACH, | |
| }; | |
| #define SCTP_EVENT_OTHER_MAX SCTP_EVENT_ICMP_PROTO_UNREACH | |
| #define SCTP_NUM_OTHER_TYPES (SCTP_EVENT_OTHER_MAX + 1) | |
| /* These are primitive requests from the ULP. */ | |
| enum sctp_event_primitive { | |
| SCTP_PRIMITIVE_ASSOCIATE = 0, | |
| SCTP_PRIMITIVE_SHUTDOWN, | |
| SCTP_PRIMITIVE_ABORT, | |
| SCTP_PRIMITIVE_SEND, | |
| SCTP_PRIMITIVE_REQUESTHEARTBEAT, | |
| SCTP_PRIMITIVE_ASCONF, | |
| SCTP_PRIMITIVE_RECONF, | |
| }; | |
| #define SCTP_EVENT_PRIMITIVE_MAX SCTP_PRIMITIVE_RECONF | |
| #define SCTP_NUM_PRIMITIVE_TYPES (SCTP_EVENT_PRIMITIVE_MAX + 1) | |
| /* We define here a utility type for manipulating subtypes. | |
| * The subtype constructors all work like this: | |
| * | |
| * union sctp_subtype foo = SCTP_ST_CHUNK(SCTP_CID_INIT); | |
| */ | |
| union sctp_subtype { | |
| enum sctp_cid chunk; | |
| enum sctp_event_timeout timeout; | |
| enum sctp_event_other other; | |
| enum sctp_event_primitive primitive; | |
| }; | |
| #define SCTP_SUBTYPE_CONSTRUCTOR(_name, _type, _elt) \ | |
| static inline union sctp_subtype \ | |
| SCTP_ST_## _name (_type _arg) \ | |
| { union sctp_subtype _retval; _retval._elt = _arg; return _retval; } | |
| SCTP_SUBTYPE_CONSTRUCTOR(CHUNK, enum sctp_cid, chunk) | |
| SCTP_SUBTYPE_CONSTRUCTOR(TIMEOUT, enum sctp_event_timeout, timeout) | |
| SCTP_SUBTYPE_CONSTRUCTOR(OTHER, enum sctp_event_other, other) | |
| SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE, enum sctp_event_primitive, primitive) | |
| #define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA || \ | |
| a->chunk_hdr->type == SCTP_CID_I_DATA) | |
| /* Internal error codes */ | |
| enum sctp_ierror { | |
| SCTP_IERROR_NO_ERROR = 0, | |
| SCTP_IERROR_BASE = 1000, | |
| SCTP_IERROR_NO_COOKIE, | |
| SCTP_IERROR_BAD_SIG, | |
| SCTP_IERROR_STALE_COOKIE, | |
| SCTP_IERROR_NOMEM, | |
| SCTP_IERROR_MALFORMED, | |
| SCTP_IERROR_BAD_TAG, | |
| SCTP_IERROR_BIG_GAP, | |
| SCTP_IERROR_DUP_TSN, | |
| SCTP_IERROR_HIGH_TSN, | |
| SCTP_IERROR_IGNORE_TSN, | |
| SCTP_IERROR_NO_DATA, | |
| SCTP_IERROR_BAD_STREAM, | |
| SCTP_IERROR_BAD_PORTS, | |
| SCTP_IERROR_AUTH_BAD_HMAC, | |
| SCTP_IERROR_AUTH_BAD_KEYID, | |
| SCTP_IERROR_PROTO_VIOLATION, | |
| SCTP_IERROR_ERROR, | |
| SCTP_IERROR_ABORT, | |
| }; | |
| /* SCTP state defines for internal state machine */ | |
| enum sctp_state { | |
| SCTP_STATE_CLOSED = 0, | |
| SCTP_STATE_COOKIE_WAIT = 1, | |
| SCTP_STATE_COOKIE_ECHOED = 2, | |
| SCTP_STATE_ESTABLISHED = 3, | |
| SCTP_STATE_SHUTDOWN_PENDING = 4, | |
| SCTP_STATE_SHUTDOWN_SENT = 5, | |
| SCTP_STATE_SHUTDOWN_RECEIVED = 6, | |
| SCTP_STATE_SHUTDOWN_ACK_SENT = 7, | |
| }; | |
| #define SCTP_STATE_MAX SCTP_STATE_SHUTDOWN_ACK_SENT | |
| #define SCTP_STATE_NUM_STATES (SCTP_STATE_MAX + 1) | |
| /* These are values for sk->state. | |
| * For a UDP-style SCTP socket, the states are defined as follows | |
| * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to | |
| * accept new associations, but it can initiate the creation of new ones. | |
| * - A socket in SCTP_SS_LISTENING state indicates that it is willing to | |
| * accept new associations and can initiate the creation of new ones. | |
| * - A socket in SCTP_SS_ESTABLISHED state indicates that it is a peeled off | |
| * socket with one association. | |
| * For a TCP-style SCTP socket, the states are defined as follows | |
| * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to | |
| * accept new associations, but it can initiate the creation of new ones. | |
| * - A socket in SCTP_SS_LISTENING state indicates that it is willing to | |
| * accept new associations, but cannot initiate the creation of new ones. | |
| * - A socket in SCTP_SS_ESTABLISHED state indicates that it has a single | |
| * association. | |
| */ | |
| enum sctp_sock_state { | |
| SCTP_SS_CLOSED = TCP_CLOSE, | |
| SCTP_SS_LISTENING = TCP_LISTEN, | |
| SCTP_SS_ESTABLISHING = TCP_SYN_SENT, | |
| SCTP_SS_ESTABLISHED = TCP_ESTABLISHED, | |
| SCTP_SS_CLOSING = TCP_CLOSE_WAIT, | |
| }; | |
| enum sctp_plpmtud_state { | |
| SCTP_PL_DISABLED, | |
| SCTP_PL_BASE, | |
| SCTP_PL_SEARCH, | |
| SCTP_PL_COMPLETE, | |
| SCTP_PL_ERROR, | |
| }; | |
| #define SCTP_BASE_PLPMTU 1200 | |
| #define SCTP_MAX_PLPMTU 9000 | |
| #define SCTP_MIN_PLPMTU 512 | |
| #define SCTP_MAX_PROBES 3 | |
| #define SCTP_PL_BIG_STEP 32 | |
| #define SCTP_PL_MIN_STEP 4 | |
| /* These functions map various type to printable names. */ | |
| const char *sctp_cname(const union sctp_subtype id); /* chunk types */ | |
| const char *sctp_oname(const union sctp_subtype id); /* other events */ | |
| const char *sctp_tname(const union sctp_subtype id); /* timeouts */ | |
| const char *sctp_pname(const union sctp_subtype id); /* primitives */ | |
| /* This is a table of printable names of sctp_state_t's. */ | |
| extern const char *const sctp_state_tbl[]; | |
| extern const char *const sctp_evttype_tbl[]; | |
| extern const char *const sctp_status_tbl[]; | |
| /* Maximum chunk length considering padding requirements. */ | |
| enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) }; | |
| /* Encourage Cookie-Echo bundling by pre-fragmenting chunks a little | |
| * harder (until reaching ESTABLISHED state). | |
| */ | |
| enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 }; | |
| /* Guess at how big to make the TSN mapping array. | |
| * We guarantee that we can handle at least this big a gap between the | |
| * cumulative ACK and the highest TSN. In practice, we can often | |
| * handle up to twice this value. | |
| * | |
| * NEVER make this more than 32767 (2^15-1). The Gap Ack Blocks in a | |
| * SACK (see section 3.3.4) are only 16 bits, so 2*SCTP_TSN_MAP_SIZE | |
| * must be less than 65535 (2^16 - 1), or we will have overflow | |
| * problems creating SACK's. | |
| */ | |
| #define SCTP_TSN_MAP_INITIAL BITS_PER_LONG | |
| #define SCTP_TSN_MAP_INCREMENT SCTP_TSN_MAP_INITIAL | |
| #define SCTP_TSN_MAP_SIZE 4096 | |
| /* We will not record more than this many duplicate TSNs between two | |
| * SACKs. The minimum PMTU is 512. Remove all the headers and there | |
| * is enough room for 117 duplicate reports. Round down to the | |
| * nearest power of 2. | |
| */ | |
| enum { SCTP_MAX_DUP_TSNS = 16 }; | |
| enum { SCTP_MAX_GABS = 16 }; | |
| /* Heartbeat interval - 30 secs */ | |
| #define SCTP_DEFAULT_TIMEOUT_HEARTBEAT (30*1000) | |
| /* Delayed sack timer - 200ms */ | |
| #define SCTP_DEFAULT_TIMEOUT_SACK (200) | |
| /* RTO.Initial - 3 seconds | |
| * RTO.Min - 1 second | |
| * RTO.Max - 60 seconds | |
| * RTO.Alpha - 1/8 | |
| * RTO.Beta - 1/4 | |
| */ | |
| #define SCTP_RTO_INITIAL (3 * 1000) | |
| #define SCTP_RTO_MIN (1 * 1000) | |
| #define SCTP_RTO_MAX (60 * 1000) | |
| #define SCTP_RTO_ALPHA 3 /* 1/8 when converted to right shifts. */ | |
| #define SCTP_RTO_BETA 2 /* 1/4 when converted to right shifts. */ | |
| /* Maximum number of new data packets that can be sent in a burst. */ | |
| #define SCTP_DEFAULT_MAX_BURST 4 | |
| #define SCTP_CLOCK_GRANULARITY 1 /* 1 jiffy */ | |
| #define SCTP_DEFAULT_COOKIE_LIFE (60 * 1000) /* 60 seconds */ | |
| #define SCTP_DEFAULT_MINWINDOW 1500 /* default minimum rwnd size */ | |
| #define SCTP_DEFAULT_MAXWINDOW 65535 /* default rwnd size */ | |
| #define SCTP_DEFAULT_RWND_SHIFT 4 /* by default, update on 1/16 of | |
| * rcvbuf, which is 1/8 of initial | |
| * window | |
| */ | |
| #define SCTP_DEFAULT_MAXSEGMENT 1500 /* MTU size, this is the limit | |
| * to which we will raise the P-MTU. | |
| */ | |
| #define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */ | |
| #define SCTP_COOKIE_KEY_SIZE 32 /* size of cookie HMAC key */ | |
| #define SCTP_COOKIE_MAC_SIZE 32 /* size of HMAC field in cookies */ | |
| #define SCTP_COOKIE_MULTIPLE 32 /* Pad out our cookie to make our hash | |
| * functions simpler to write. | |
| */ | |
| #define SCTP_DEFAULT_UDP_PORT 9899 /* default UDP tunneling port */ | |
| /* These are the values for pf exposure, UNUSED is to keep compatible with old | |
| * applications by default. | |
| */ | |
| enum { | |
| SCTP_PF_EXPOSE_UNSET, | |
| SCTP_PF_EXPOSE_DISABLE, | |
| SCTP_PF_EXPOSE_ENABLE, | |
| }; | |
| #define SCTP_PF_EXPOSE_MAX SCTP_PF_EXPOSE_ENABLE | |
| #define SCTP_PS_RETRANS_MAX 0xffff | |
| /* These return values describe the success or failure of a number of | |
| * routines which form the lower interface to SCTP_outqueue. | |
| */ | |
| enum sctp_xmit { | |
| SCTP_XMIT_OK, | |
| SCTP_XMIT_PMTU_FULL, | |
| SCTP_XMIT_RWND_FULL, | |
| SCTP_XMIT_DELAY, | |
| }; | |
| /* These are the commands for manipulating transports. */ | |
| enum sctp_transport_cmd { | |
| SCTP_TRANSPORT_UP, | |
| SCTP_TRANSPORT_DOWN, | |
| SCTP_TRANSPORT_PF, | |
| }; | |
| /* These are the address scopes defined mainly for IPv4 addresses | |
| * based on draft of SCTP IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>. | |
| * These scopes are hopefully generic enough to be used on scoping both | |
| * IPv4 and IPv6 addresses in SCTP. | |
| * At this point, the IPv6 scopes will be mapped to these internal scopes | |
| * as much as possible. | |
| */ | |
| enum sctp_scope { | |
| SCTP_SCOPE_GLOBAL, /* IPv4 global addresses */ | |
| SCTP_SCOPE_PRIVATE, /* IPv4 private addresses */ | |
| SCTP_SCOPE_LINK, /* IPv4 link local address */ | |
| SCTP_SCOPE_LOOPBACK, /* IPv4 loopback address */ | |
| SCTP_SCOPE_UNUSABLE, /* IPv4 unusable addresses */ | |
| }; | |
| enum { | |
| SCTP_SCOPE_POLICY_DISABLE, /* Disable IPv4 address scoping */ | |
| SCTP_SCOPE_POLICY_ENABLE, /* Enable IPv4 address scoping */ | |
| SCTP_SCOPE_POLICY_PRIVATE, /* Follow draft but allow IPv4 private addresses */ | |
| SCTP_SCOPE_POLICY_LINK, /* Follow draft but allow IPv4 link local addresses */ | |
| }; | |
| #define SCTP_SCOPE_POLICY_MAX SCTP_SCOPE_POLICY_LINK | |
| /* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>, | |
| * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 192.88.99.0/24. | |
| * Also, RFC 8.4, non-unicast addresses are not considered valid SCTP | |
| * addresses. | |
| */ | |
| #define IS_IPV4_UNUSABLE_ADDRESS(a) \ | |
| ((htonl(INADDR_BROADCAST) == a) || \ | |
| ipv4_is_multicast(a) || \ | |
| ipv4_is_zeronet(a) || \ | |
| ipv4_is_anycast_6to4(a)) | |
| /* Flags used for the bind address copy functions. */ | |
| #define SCTP_ADDR4_ALLOWED 0x00000001 /* IPv4 address is allowed by | |
| local sock family */ | |
| #define SCTP_ADDR6_ALLOWED 0x00000002 /* IPv6 address is allowed by | |
| local sock family */ | |
| #define SCTP_ADDR4_PEERSUPP 0x00000004 /* IPv4 address is supported by | |
| peer */ | |
| #define SCTP_ADDR6_PEERSUPP 0x00000008 /* IPv6 address is supported by | |
| peer */ | |
| /* Reasons to retransmit. */ | |
| enum sctp_retransmit_reason { | |
| SCTP_RTXR_T3_RTX, | |
| SCTP_RTXR_FAST_RTX, | |
| SCTP_RTXR_PMTUD, | |
| SCTP_RTXR_T1_RTX, | |
| }; | |
| /* Reasons to lower cwnd. */ | |
| enum sctp_lower_cwnd { | |
| SCTP_LOWER_CWND_T3_RTX, | |
| SCTP_LOWER_CWND_FAST_RTX, | |
| SCTP_LOWER_CWND_ECNE, | |
| SCTP_LOWER_CWND_INACTIVE, | |
| }; | |
| /* SCTP-AUTH Necessary constants */ | |
| /* SCTP-AUTH, Section 3.3 | |
| * | |
| * The following Table 2 shows the currently defined values for HMAC | |
| * identifiers. | |
| * | |
| * +-----------------+--------------------------+ | |
| * | HMAC Identifier | Message Digest Algorithm | | |
| * +-----------------+--------------------------+ | |
| * | 0 | Reserved | | |
| * | 1 | SHA-1 defined in [8] | | |
| * | 2 | Reserved | | |
| * | 3 | SHA-256 defined in [8] | | |
| * +-----------------+--------------------------+ | |
| */ | |
| enum { | |
| SCTP_AUTH_HMAC_ID_RESERVED_0, | |
| SCTP_AUTH_HMAC_ID_SHA1, | |
| SCTP_AUTH_HMAC_ID_RESERVED_2, | |
| SCTP_AUTH_HMAC_ID_SHA256, | |
| __SCTP_AUTH_HMAC_MAX | |
| }; | |
| #define SCTP_AUTH_HMAC_ID_MAX __SCTP_AUTH_HMAC_MAX - 1 | |
| #define SCTP_AUTH_NUM_HMACS __SCTP_AUTH_HMAC_MAX | |
| /* SCTP-AUTH, Section 3.2 | |
| * The chunk types for INIT, INIT-ACK, SHUTDOWN-COMPLETE and AUTH chunks | |
| * MUST NOT be listed in the CHUNKS parameter | |
| */ | |
| #define SCTP_NUM_NOAUTH_CHUNKS 4 | |
| #define SCTP_AUTH_MAX_CHUNKS (SCTP_NUM_CHUNK_TYPES - SCTP_NUM_NOAUTH_CHUNKS) | |
| /* SCTP-AUTH Section 6.1 | |
| * The RANDOM parameter MUST contain a 32 byte random number. | |
| */ | |
| #define SCTP_AUTH_RANDOM_LENGTH 32 | |
| #define SCTP_PROBE_TIMER_MIN 5000 | |
| #endif /* __sctp_constants_h__ */ |