| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * intel-mid_wdt: generic Intel MID SCU watchdog driver |
| * |
| * Platforms supported so far: |
| * - Merrifield only |
| * |
| * Copyright (C) 2014 Intel Corporation. All rights reserved. |
| * Contact: David Cohen <david.a.cohen@linux.intel.com> |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/nmi.h> |
| #include <linux/platform_device.h> |
| #include <linux/watchdog.h> |
| #include <linux/platform_data/intel-mid_wdt.h> |
| |
| #include <asm/intel_scu_ipc.h> |
| #include <asm/intel-mid.h> |
| |
| #define IPC_WATCHDOG 0xf8 |
| |
| #define MID_WDT_PRETIMEOUT 15 |
| #define MID_WDT_TIMEOUT_MIN (1 + MID_WDT_PRETIMEOUT) |
| #define MID_WDT_TIMEOUT_MAX 170 |
| #define MID_WDT_DEFAULT_TIMEOUT 90 |
| |
| /* SCU watchdog messages */ |
| enum { |
| SCU_WATCHDOG_START = 0, |
| SCU_WATCHDOG_STOP, |
| SCU_WATCHDOG_KEEPALIVE, |
| }; |
| |
| static inline int wdt_command(int sub, u32 *in, int inlen) |
| { |
| return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0); |
| } |
| |
| static int wdt_start(struct watchdog_device *wd) |
| { |
| struct device *dev = watchdog_get_drvdata(wd); |
| int ret, in_size; |
| int timeout = wd->timeout; |
| struct ipc_wd_start { |
| u32 pretimeout; |
| u32 timeout; |
| } ipc_wd_start = { timeout - MID_WDT_PRETIMEOUT, timeout }; |
| |
| /* |
| * SCU expects the input size for watchdog IPC to |
| * be based on 4 bytes |
| */ |
| in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4); |
| |
| ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size); |
| if (ret) |
| dev_crit(dev, "error starting watchdog: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int wdt_ping(struct watchdog_device *wd) |
| { |
| struct device *dev = watchdog_get_drvdata(wd); |
| int ret; |
| |
| ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0); |
| if (ret) |
| dev_crit(dev, "Error executing keepalive: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int wdt_stop(struct watchdog_device *wd) |
| { |
| struct device *dev = watchdog_get_drvdata(wd); |
| int ret; |
| |
| ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0); |
| if (ret) |
| dev_crit(dev, "Error stopping watchdog: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static irqreturn_t mid_wdt_irq(int irq, void *dev_id) |
| { |
| panic("Kernel Watchdog"); |
| |
| /* This code should not be reached */ |
| return IRQ_HANDLED; |
| } |
| |
| static const struct watchdog_info mid_wdt_info = { |
| .identity = "Intel MID SCU watchdog", |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, |
| }; |
| |
| static const struct watchdog_ops mid_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = wdt_start, |
| .stop = wdt_stop, |
| .ping = wdt_ping, |
| }; |
| |
| static int mid_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct watchdog_device *wdt_dev; |
| struct intel_mid_wdt_pdata *pdata = dev->platform_data; |
| int ret; |
| |
| if (!pdata) { |
| dev_err(dev, "missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (pdata->probe) { |
| ret = pdata->probe(pdev); |
| if (ret) |
| return ret; |
| } |
| |
| wdt_dev = devm_kzalloc(dev, sizeof(*wdt_dev), GFP_KERNEL); |
| if (!wdt_dev) |
| return -ENOMEM; |
| |
| wdt_dev->info = &mid_wdt_info; |
| wdt_dev->ops = &mid_wdt_ops; |
| wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN; |
| wdt_dev->max_timeout = MID_WDT_TIMEOUT_MAX; |
| wdt_dev->timeout = MID_WDT_DEFAULT_TIMEOUT; |
| wdt_dev->parent = dev; |
| |
| watchdog_set_drvdata(wdt_dev, dev); |
| |
| ret = devm_request_irq(dev, pdata->irq, mid_wdt_irq, |
| IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog", |
| wdt_dev); |
| if (ret) { |
| dev_err(dev, "error requesting warning irq %d\n", pdata->irq); |
| return ret; |
| } |
| |
| /* |
| * The firmware followed by U-Boot leaves the watchdog running |
| * with the default threshold which may vary. When we get here |
| * we should make a decision to prevent any side effects before |
| * user space daemon will take care of it. The best option, |
| * taking into consideration that there is no way to read values |
| * back from hardware, is to enforce watchdog being run with |
| * deterministic values. |
| */ |
| ret = wdt_start(wdt_dev); |
| if (ret) |
| return ret; |
| |
| /* Make sure the watchdog is serviced */ |
| set_bit(WDOG_HW_RUNNING, &wdt_dev->status); |
| |
| ret = devm_watchdog_register_device(dev, wdt_dev); |
| if (ret) { |
| dev_err(dev, "error registering watchdog device\n"); |
| return ret; |
| } |
| |
| dev_info(dev, "Intel MID watchdog device probed\n"); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mid_wdt_driver = { |
| .probe = mid_wdt_probe, |
| .driver = { |
| .name = "intel_mid_wdt", |
| }, |
| }; |
| |
| module_platform_driver(mid_wdt_driver); |
| |
| MODULE_AUTHOR("David Cohen <david.a.cohen@linux.intel.com>"); |
| MODULE_DESCRIPTION("Watchdog Driver for Intel MID platform"); |
| MODULE_LICENSE("GPL"); |